|
| 1 | Earth work in excavation of foundation trenches in hard soil within 50 meter initial leadand 1.5mt. Intial lift including rough dressing and levelling the bed and depositing the soil away from work site including cost of all labour, T&P etc. complete as directed by the Engineer in Charge. |
| 2 | Supplying and filling foundation and plinth with sand well watered and rammed including cost, conveyance, royalties and taxes of all materials and cost of all labour, T&P required for the work etc. complete as directed by the Engineer-in Charge. |
| 3 | Cement concrete (1:3:6) using 12 mm(½\\") Size hard crusher broken granite chips of approved quality from approved quarry including lowering lying concrete watering and curing etc. complete to required levels laid in layers including cost,conveyance,royalities and taxes of all materials and cost of all labour ,T&P required for the work etc. complete as directed by the Engineer-in-charge. |
| 4 | R.C.C. work M-20 grade with 25mm and down grade C.B chips having a minimum compressive strength (in work test) 200 kg/cm2 in 15cm cubes at 20 days after mixing and test conduct in accordance with I..S 456 and I.S 516 including hoisting lowring laying concrete and compacting with vibrators, curing for 28 days with smooth centering and shuttering and finishing the exposed surface smooth providing grooves or beads where necessary including cost, conveyance, royalties & T&P required for the work complete in all respect but excluding cost of HYSD and binding wires and labour charges for bending binding and tying the grills as per drawing, specification and direction of Engineer-in-Charge( Pile Cap) . |
| 5 | Supplying HYSD (FE 415)/ (FE 500) of SAIL/TATA/JINDAL STEEL/SHYAM STEEL for reinforcement tying the grills and placing in position as required for the RCC works and for providing fan hooks hoisting and lowering,laying including cost,conveyance & taxes of HYSD bars and binding wires of 18 to 20 gauge required for the work and bending binding and tying the grills ( Payment will be made on weight of HYSD bars only and no separate payment will be made towords the weight of binding wires)etc. complete as per specification and direction of the Engineer - in - charge |
| 6 | Rigid Smooth centering & shuttering for RCC worksetc complete including Cost & conveyancce of all material required etc. A. G.beam |
| 7 | Coloum & Beam |
| 8 | Lintel |
| 9 | Stair Case |
| 10 | Roof Slab |
| 11 | Fly Ash brick masonry in cement mortar (1:6) in Foundation & Plinth using Fly Ash brick size 25cm x 12cm x 8cm and 75 kg/cm2 with dimensional tolerance 8% after immersing the bricks for six hours in water before use including splays cutting circular moulding corbelling chamfering and similar such type of work as directed by the Engineer-in-charge including watering and curing cost, conveyance, royalties and taxes of all materials and cost of all labour T&P required for the work and finished item of work shall confirm to relevant I.S. specification and confirm test as per specification as directed by the Engineer-in-charge. |
| 12 | 2.5cm thick DPC CC(1.2.4) using 12mm size hg stone chips with all cost if all materilas etc |
| 13 | Fly Ash brick masonry in cement mortar (1:6) in Superstructure using Fly Ash brick size 25cm x 12cm x 8cm and 75 kg/cm2 with dimensional tolerance 8% after immersing the bricks for six hours in water before use including splays cutting circular moulding corbelling chamfering and similar such type of work as directed by the Engineer-in-charge including watering and curing cost, conveyance, royalties and taxes of all materials and cost of all labour T&P required for the work and finished item of work shall confirm to relevant I.S. specification and confirm test as per specification as directed by the Engineer-in-charge. |
| 14 | 12mm thick cement plaster in cm(1.6) over brick work with all cost conveyance |
| 15 | 16mm thick cement plaster in cm(1.6) over brick work with all cost conveyance |
| 16 | 6mm thick cement plaster in cm(1.4) over RCC Surfcae with all cost conveyance etc |
| 17 | Labour for fitting & Fixing vertifiet floor tile on floor tread of step & landing on 25mm thick bed in cm (1:1) with all cost |
| 18 | Fixing of Vitrified tile in dados skritting & riser of steps on 12mm thick bed in cm (1.3) including cost of vetrified tile |
| 19 | Supplying fitting G.I rolling shutter as per the approved design & specification. |
| 20 | Priming One coat over Plaster surface with any approved wall primer |
| 21 | Finishing Wall surface 2coats of weather coat emulsion with all cost |
| 22 | Finishing Wall surface 2coats of Plastic emulsion with all cost |
| 23 | Painting 2 coat over a coat of primer with shynthetic enamel paint with all cost |
| 24 | R.C.C. work M-25 grade with 25mm and down grade C.B chips having a minimum compressive strength (in work test) 200 kg/cm2 in 15cm cubes at 20 days after mixing and test conduct in accordance with I..S 456 and I.S 516 including hoisting lowring laying concrete and compacting with vibrators, curing for 28 days with smooth centering and shuttering and finishing the exposed surface smooth providing grooves or beads where necessary including cost, conveyance, royalties & T&P required for the work complete in all respect but excluding cost of HYSD and binding wires and labour charges for bending binding and tying the grills as per drawing, specification and direction of Engineer-in-Charge( Pile Cap) . |
| 25 | Supplying HYSD (FE 415)/ (FE 500) of SAIL/TATA/JINDAL STEEL/SHYAM STEEL for reinforcement tying the grills and placing in position as required for the RCC works and for providing fan hooks hoisting and lowering,laying including cost,conveyance & taxes of HYSD bars and binding wires of 18 to 20 gauge required for the work and bending binding and tying the grills ( Payment will be made on weight of HYSD bars only and no separate payment will be made towords the weight of binding wires)etc. complete as per specification and direction of the Engineer - in - charge |
| 26 | Rigid Smooth centering & shuttering for RCC worksetc complete including Cost & conveyancce of all material required etc. A. Coloum & Beam |
| 27 | Lintel |
| 28 | Stair Case |
| 29 | Roof Slab |
| 30 | Fly Ash brick masonry in cement mortar (1:6) in Superstructure using Fly Ash brick size 25cm x 12cm x 8cm and 75 kg/cm2 with dimensional tolerance 8% after immersing the bricks for six hours in water before use including splays cutting circular moulding corbelling chamfering and similar such type of work as directed by the Engineer-in-charge including watering and curing cost, conveyance, royalties and taxes of all materials and cost of all labour T&P required for the work and finished item of work shall confirm to relevant I.S. specification and confirm test as per specification as directed by the Engineer-in-charge. |
| 31 | 12mm thick cement plaster in cm(1.6) over brick work with all cost conveyance |
| 32 | 16mm thick cement plaster in cm(1.6) over brick work with all cost conveyance |
| 33 | 6mm thick cement plaster in cm(1.4) over RCC Surfcae with all cost conveyance etc |
| 34 | Labour for fitting & Fixing vertifiet floor tile on floor tread of step & landing on 25mm thick bed in cm (1:1) with all cost |
| 35 | Fixing of Vitrified tile in dados skritting & riser of steps on 12mm thick bed in cm (1.3) including cost of vetrified tile |
| 36 | Supplying fitting G.I rolling shutter as per the approved design & specification. |
| 37 | Door Mumty Floor |
| 38 | Priming One coat over Plaster surface with any approved wall primer |
| 39 | Finishing Wall surface 2coats of weather coat emulsion with all cost |
| 40 | Finishing Wall surface 2coats of Plastic emulsion with all cost |
| 41 | Painting 2 coat over a coat of primer with shynthetic enamel paint with all cost |
| 42 | Supplying fitting & Fixing of stailness steel of 304 grade in hard ralling using 50mm dia of 2mm thick circular etc |
| 43 | 20mm thick grading plaster over in cm (1.4) over slab with curring etc complete |
| 44 | PROVISION OF ELECTRIFICATION |
| 45 | PROVISION OF SANITATION SYSTEM |
| 46 | PROVISION OF DISPLAY BOARD & PHOTOGRAPHY Please Enable Macros to View BoQ information |
