|
| 1 | Demolition of cement concrete (unreinforced) any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 2 | M&L for 25mm thick PCC (1:2:4) type B1 using 20mm graded stone agg as in levelling coarse under floor finished surface even and smooth without using extra cement complete all as specified and directed. |
| 3 | M&L for Plain cement concrete 1:5:10 type E2 using 40mm graded stone aggregate as in filling and mass concrete complete all as specified and directed. |
| 4 | Applying epoxy treatment for bonding new or old concrete surfaces by applying chemical FOSROC and NITOBOND AR in three coats by brush for sunken treatment to stop seepage at bottom and side prepared surfaces complete all as specified and directed. |
| 5 | M&L for 12 mm thick cement plaster finished with a floating coat of neat cement of mix in 1:3 (1 cement: 3 fine sand) complete all as specified and directed. |
| 6 | Dismantling floors hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 7 | M&L for non skid coloured joint free tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 8 | Description all as per item Ser No. 7.00 here in before but in skirting/dados etc. |
| 9 | M&L for coloured glazed ceramic tiles of size 300x200x7 to 8mm thick on vertical surfaces such as skirting, dados etc, set and jointed in neat cement slurry and pointed in coloured cement to match over 10mm thick rendering in CM 1:4 rough finished to receive wall finishes complete all as specified and directed. |
| 10 | M&L for virified Ceramic tiles dark shade/double charged/ ultracharged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 11 | Description all as per item Ser No. 10.00 here in before but in skirting including necessary cutting of tiles complete all as specified and directed. |
| 12 | Dismantling stone slabs laid, bedded and pointed in any mortar and tiles of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 13 | M&L for pre- polished granite slab machine cut, in skirting/dado, steps, jambs, pillars, window cill, cooking platform etc. of any shade as approved by GE of 15 to 20 mm thick including necessary notching, chamfering the edges over cement screed bed including Cutting, Grinding and Mirror polishing (Granite finish) with suitable grinding stones over 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 14 | Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar complete all as specified and directed. |
| 15 | M&L for 15mm cement plaster in CM 1:4 on fair finished wall surfaces even and smooth without using extra cement complete all as specified and directed. |
| 16 | M&L for Dubbing out 15mm thick on irregular face of walls in CM 1:6 on brick work or concrete/stone surfaces complete all as specified and directed. |
| 17 | M&L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces/ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 18 | M&L for rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces/ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 19 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement and user water proofing compound complete all as specified and directed.(Note : WPC will be measured and paid separately under relevant item) |
| 20 | Supply only integral water proofing compound complete all as specified and directed. |
| 21 | Material and labour for distempering walls with two coats of washable distemper oil emulsion on new surfaces over a coat of alkali resistant priming paint (white or tinted) as directed of distempered and painted surfaces as in preparatory work to give uniform and smooth finish complete all as specified and directed. |
| 22 | Material and labour including preparation of new plastered surface for three coasts of white wash on ceiling suface over a coat of alkali resistant priming paint to give uniform and smooth finish complete all as specified and directed. |
| 23 | Material and labour including preparation of old plastered surface for two coasts of white wash on ceiling suface to give uniform and smooth finish complete all as specified and directed. |
| 24 | M&L for preparation of old surfaces of wall including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed |
| 25 | M&L for preparation of old surfaces of wall including complete removal of existing treatment and preparation of surface and applying two coats of distemper oil emulsion over a coat of alkali resistant primer over 1mm wall care putty complete all as specified and directed |
| 26 | M&L for two coats of cement base paint including preparation of new plastered wall surfaces and applying priming plastered and other surfaces with alkali- resistant priming paint complete all as specified and directed. |
| 27 | M&L for preparation of old surfaces of wall including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of cement base paint over a coat of alkali resistant primer complete all as specified and directed |
| 28 | M&L for preparation of old decorated surface of walls and applying two coat of weather coat (ACE) interior/exterior emulsion paint including preparation of surfaces and remove all dirt and efflorences etc. complete all as specified and directed |
| 29 | M&L for preparation of old surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint on old surfaces in any tint complete all as specified and directed. |
| 30 | M&L Preparation of old treated wooden surface exceeding 10 cm width and grith and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 31 | Taking down chowkhats or frames (without taking off shutters) area n. exc 1.5 sq. m each complete all as specified and directed. |
| 32 | Taking down chowkhats or frames (without taking off shutters) exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and directed. |
| 33 | Taking down shutters of any description exc. 1.0 sqm but not exc. 2.0 each complete all as specified and directed. |
| 34 | Taking down shutters of any description area exc. 1 sq. m and n exc 2 sq. m each and refixing in same opening after repairing with necessary fittings complete all as specified and directed. |
| 35 | Taking down shutters of any description area exc. 2 sq. m each and refixing in same opening after repairing with necessary fittings complete all as specified and directed. |
| 36 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 37 | S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, door frame of MS angle with welded butt hinges, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 38 | S&F 30mm thick 2nd class hardwood glazed and skeleton shutters divided into squares, with plain, chamfered or roun- ded, mitred and rebated sash bars, any numbers, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters complete all as specified and directed in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 39 | S&F 30mm thick flush shutters, solid core construction, with partical board core and plywood face panels, commercial type on with both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 40 | M&L 0.9mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed. |
| 41 | S&F solid PVC door frame os size 50mm X 47mm made out of 5mm thick single side prelaminated PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with the prelaminated sheet reinforced with MS square tube complete all as specified and directed. |
| 42 | S&F factory made solid PVC moulded door shutter 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 5mm thick moulded PVC prelam sheet on front face and 5mm prelam coloured PVC sheet on back face, complete all as specified and directed by Engr-in-Charge. |
| 43 | S&F powder coated (minimum thickness of powder coating 50 micron) slidng window three track having two shutter of 4mm thick ordinary glass and one shutter of 0.36mm nominal dia of stainless steel wire and aperature 1.18mm including three track window frame weighing not less than 0.55kg/RM fixed with dash fasterners in finished surfaced wall including all necessary fittings like handles, auto locking device, rubber /aluminium corner beading, aluminium grill (fixed in outer side with U channel) etc. complete all as specified and directed. (Note :- Necessary glass and wire mesh will be paid separately under revelant item). |
| 44 | Supply and fix galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of apertures 1.18 mm and fixed with tinned tacks or galvanized wire staple complete all as specified and directed. |
| 45 | Supply and fix in repairs galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of apertures 1.18 mm and fixed with tinned tacks or galvanized wire staple complete all as specified and directed. |
| 46 | M&L for preparation of new surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer in any tint complete all as specified and directed. |
| 47 | Hacking out old broken glass area exc. 1.5 Sqm each (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips and providing new one complete all as specified and directed. |
| 48 | S&F 4.0mm thick, sheet glass,ordinary quality and glazing with beading (any type) or oil putty in square not exc 0.5 sq. m in each pane, etc complete all as specified and directed. |
| 49 | S&F 4.00mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 50 | S&F 200 mm size Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 51 | S&F 150 mm size Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 52 | S&F 300 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed. |
| 53 | Supply & Fixing 150 mm size Aluminium handles, cast type, anodised complete all as specified and directed. |
| 54 | Supply & Fixing 125 mm size Aluminium handles, cast type, anodised complete all as specified and directed. |
| 55 | S&F Butt hinges, medium weight coldrolled mild steel and fixed 100mm size complete all as specified and directed. |
| 56 | S&F Butt hinges, medium weight coldrolled mild steel and fixed 75mm size complete all as specified and directed. |
| 57 | M&L for preparation of new wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint in any tint over a coat of pink primer on new surfaces complete all as specified and directed. |
| 58 | Dismantling boarding of any description and fixed in any position fixed with nails or screws complete all as specified and directed. |
| 59 | S&F 18mm to 20mm thick solid factory made PVC board for cup board /cabinate shutter with one side 1mm thick printed pvc sheet other side plain pvc sheet suitable fixed with &including suitable pvc frame, matching colured beading to cover all edges & screwed portion of frame, Magnetic catcher as per specification & drawing complete all as specified & directed. |
| 60 | S&F mild steel ,bright finish continious piano hinge with flap size 30mm fixed as in repair complete all as specified and directed. |
| 61 | S&F 15mm brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for WHB complete all as specified and directed. |
| 62 | Description all as per item ser No. 61.00 here in before but wall mixer. |
| 63 | S&F in repair 15mm bore stop valve, cast copper alloy screwed down high pressure with crutch or butterfly handle chromium plated fancy type long shank and cup(concealed type), screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 64 | S&F in repairs brass Choromium plated shower rose with or without swivel joints 125mm size includingfixing to steel pipe or union complete all as specified and directed. |
| 65 | S&F in repairs PVC low level flushing cistern 10 Ltr capacity including necessary brackets incl connecting flush pipe etc and making good the disturbed surfaces complete all as specified and directed. |
| 66 | S&F 600 mm long 20mm dia brass chromium plated tubular towel rails complete all as specified and directed. |
| 67 | S&F in repairs 15 mm dia angle cock (two way) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe for fixing of health faucet and PVC connections etc complete all as specified and directed. |
| 68 | Providing and fixing in repairs 15mm C.P. Bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified and directed. |
| 69 | S&F 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC bldg board or commercial plywood fixed to wooden plugs with CP brass screws & cup washer complete all as specified and directed. |
| 70 | Providing and fixing sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing as per sample complete all as specified and directed. |
| 71 | S&F in repair vitreous china wash hand basin (flat back) of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, MS brackets 2 numbers including cutting for and pinning in ends of brackets and including removing WHB outside MOD Land complete all as specified and directed. |
| 72 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with ISI marked white solid plastic seat and lid , 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required in repair complete all as specified and directed. |
| 73 | Supply and fix in repairs viterous china squatting pan Orrisa pattern size 580 x 440 mm white with \\"P\\" and \\"S\\" trap front or back inlet etc including provision of PCC (1:5:10) concrete complete all as specified and as directed |
| 74 | S&F in repairs 110mm dia PVC (SWR) 'P’ trap complete all as specified and directed. |
| 75 | S&F in repairs 110mm dia PVC (SWR) 'S’ trap complete all as specified and directed. |
| 76 | S& F PVC flexiable pipe (Connecter) 15 mm dia, 450 mm long with check nut and bolt with washer complete all as specified and directed. |
| 77 | M&L for PVC waste pipe 32 mm dia flexible with cup & pressure rating 6 kgf/cm2 to fit wash hand basin waste coupling complete all as specified and directed by Engr-in-Charge. |
| 78 | M&L for aluminium drapery rod outer dia 25mm with powder coated paint thickness ce welded MS pipe with corrugated PVC extrusion having plastic rings made of ABS plastic with outer dia 56-58 mm & inner dia 40-42mm brackets shall be at galvanised steel 1.6mm thick complete all as specified and directed. |
| 79 | S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 80 | S&F in repairs Stainless steel utencil plate rack size 600 mm x 600 mm x 250 mm ) using 0.8 mm thick sheet complete all as specified and as directed. |
| 81 | Resecuring or easing and adjusting wooden shutters of any description exc. 1 Sqm but n.exc. 2 Sqm each without taking down complete all as specified and directed. |
| 82 | M&L for servicing/ easisng of steel windows of size not exceeding 2 Sqm each including cleaning, scrapping, hacking, oiling, necessary welding, replacing broken hinges,handles ,stay etc and making good disturbed portion painting complete all as specified and directed. |
| 83 | Taking out steel water tubing and connections including cleaning for refixing 15 mm dia complete all as specified and directed. |
| 84 | Description all as per item ser No. 83.00 here in before but 20mm dia complete all as specified and directed. |
| 85 | S&F 15 mm dia galvanised steel water tubing medium grade to walls and ceiling or lying in floors complete all as specified and directed. |
| 86 | Description all as per item ser No. 85.00 here in before but 20mm dia complete all as specified and directed. |
| 87 | Re-fixing old steel water tubing and connections in new or old position (walls, ceiling, floors etc) 15 mm dia complete all as specified and directed. (Note: Serviceable pipes & fiitings obtained from item 50 to be re-used) |
| 88 | Description all as per item ser No. 87.00 here in before but 20mm dia complete all as specified and directed. |
| 89 | S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position ccomplete all as specified and directed. |
| 90 | Dismantaling of cast iron / RCC/ PVC drain pipes 75/110mm dia jointed in cement mortar and taking out from trenches or walls of any bore including fittings complete all as specified and directed. |
| 91 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to under floor/walls bore of pipe 75 mm with PVC clamps and saddles complete all as specified and directed. |
| 92 | S&F in repairs Floor door stoper of alumunium alloy body and tongue, aodised with hard drawn steel spring, fixed in floor, 150mm size complete all as specified and directed. Please Enable Macros to View BoQ information |
