|
| 1 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
| 2 | Earth work in excavation by mechanical means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: |
| 3 | Providing and laying Stone solling in Foundation trenches / inside plinth including compacting, watering Including cost of carrriage complete . |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 aggregate 40mm nominal) Nallah aggregates. |
| 5 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level - 1:1.5:3 (1 cement : 1.5 coarse sand : 3 aggregate 20 mm nominal size) Nallah aggregates. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: in 1:3:6 (1 Cement : 3 coarse sand : 6 aggregate 40 mm nominal size ) Nallah aggregates. |
| 7 | Reinforced Cement Concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 ( 1cement : 1.5 coarse sand : 3 stone aggregate of 20mm normal size aggregate. Nallah aggregates. |
| 8 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand). |
| 9 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 10 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately.KD wood. |
| 11 | Providing and fixing flat iron hold fast including fixing of frames with nuts and bolts/Nails.Including carrriage complete . |
| 12 | Centering and shuttering including strutting propping etc. removal of form work. Foundations, footings, bases of columns etc. |
| 13 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 14 | Edge of slab |
| 15 | Suspended floors, roofs, landings, balconies and access platforms. |
| 16 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto and above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 17 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded. |
| 18 | Providing colour coated high Rib color coates GS sheets fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washers file with white lead and including Ridges and valleys all complete job (upto a pitch of 60 degrees), excluding the cost of purlins, rafters and trusses.0.50mm thick . all carriages of material involved complete job. |
| 19 | 12mm thick cement Plaster in 1:6 (1 cement: 6 Sand) mix. |
| 20 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate. |
| 21 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 22 | Providing and fixing glazed shutters for doors, windows and clerestory windows including 3.5mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30mm KD wood. |
| 23 | Providing and fixing panelled & glazed shutters for doors, windows and clerestory windows including Panelling of Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 12823 marked including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws complete job. 30mm KD wood. |
| 24 | Providing/fixing 3.5mm thick glass panes.Including beading, nails and cost of carrriage complete . |
| 25 | Providing and fixing hardware fittings of approved brand and of required type as approved by Engineer incharge. complete as per the specifications . (Anodized Aluminium fittings) Tower Bolt 100 mm |
| 26 | Tower Bolt 150 mm |
| 27 | Handle 125 mm |
| 28 | Handle 150 mm' |
| 29 | 150 mm hook and eyes |
| 30 | L-DROPS |
| 31 | Finishing walls with water proofing cement paint of approved brand and manufacture & of required shade to give an even shade New work (two or more coats)[email protected]/10sqm. |
| 32 | Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood). |
| 33 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work. |
| 34 | Providing & Fixing C.P. sink mixer of approved make including cutting and making good the walls wherever required. Jaquar make. |
| 35 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shad. 16mm. |
| 36 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink without drain board. 610x510mm below depth 200mm. |
| 37 | Filling available excavated earth in trenches , plinths , sides of foundation etc . In layers not exceding 20cm in depth consolidating each layer by ramming and watering lead upto 50m lift upto 1.50m |
| 38 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.1 mm thick. |
| 39 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 40 | Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade. |
| 41 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 42 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm. |
| 43 | CERAMIC GLAZED TILESProviding and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 44 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size,with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. |
| 45 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 46 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work. |
| 47 | Carriage of materails By Mech.Transport, from source to site of work incl. loading, unloading and stacking of materials at site of work. Sand for an avg lead of 10 km. |
| 48 | Stone agg. for an avg lead of 10 km. |
| 49 | Cement/Steel for an avg lead of 30 km. |
| 50 | Bricks for an avg lead of 200 km. |
| 51 | SEPTIC AND SOAKAGE PIT INCULDING FITTINGS AND FIXTURES FOR WASHROOMEarth work in bulk excavation by mechanical means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 52 | Providing /laying of stone soling handpacked in foundation trenches including dressing, watering, compacting and all carriage up to site of work complete job. |
| 53 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering: All work upto plinth level in 1:4:8 ( 1 cement : 4 coarse sand : 8 graded crushed stone aggregate 40 mm nominal size) Nallah aggregates. |
| 54 | Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 75 in foundation & plinth in cement mortar 1:6 (1 Cement : 6 coarse sand). |
| 55 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). Nallah Aggregates. |
| 56 | Centring and shuttering including strutting, propping etc and removal of formwork for Suspended floors, roofs, landings, balconies and access platforms. |
| 57 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto and above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 58 | Dry random rubble masonry with hard stone in foundation & plinth without bond stones. Nallah stones |
| 59 | 12mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand). |
| 60 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.40mm thick with 20 mm nominal size stone aggregate. Nallah Aggregates. |
| 61 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) complete as per standard design Inside size 45x45 cm and 45 cm deep including cover with frame With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. COMPLETE JOB |
| 62 | Providing and fixing of RCC Man hole cover of size 450mmx450mm all complete job. |
| 63 | Carriage of Various materials from source to site by MT. Sand/ aggregates for an avg. lead of 10 Kms by MT. |
| 64 | Bricks for an avg. lead of 200 Kms by MT. |
| 65 | Stones for an avg. lead of 10 Kms by MT |
| 66 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 67 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer. |
| 68 | Providing & Fixing C.P. wall mixer of approved make including cutting and making good the walls wherever required. Jaquar Make. |
| 69 | Providing & Fixing C.P. tubes of approved make 450mm to 600mm long. |
| 70 | Providing and fixing of soap case of standard quality and make. |
| 71 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: (600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.) |
| 72 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality and make conforming to IS : 8931. jaquar make |
| 73 | Providing and fixing of cockrach type CP grating of standard quality and make 100mm. |
| 74 | Providing and fixing angle value for all points of standard quality and make including all accessories complete job. Jaquar make. |
| 75 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangular shape 453x357 mm. |
| 76 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. (Type B-Medium). 15mm Nominal Bore |
| 77 | 20mm Nominal Bore. |
| 78 | Providing and fixing P.V.C. pipe and pipe fittings of the following nominal dia to P.V.C. Soil/Waste/Ventilating pipes. PVC Door Tee 100mm dia of approved make type B |
| 79 | PVC bend 100mm dia of approved make type B. |
| 80 | PVC Collar 100mm dia of approved make type B. |
| 81 | PVC bend 75mm dia of approved make type B. |
| 82 | PVC Collar 75mm dia of approved make type B. |
| 83 | PVC pipe 100mm dia of approved make Type B. |
| 84 | PVC pipe 75mm dia of approved make Type B. |
| 85 | PVC pipe 40 mm dia of approved make Type B. |
| 86 | PVC cowel over vent pipe of approved quality type B. |
| 87 | PVC Reducer 100x75 mm of approved quality type B. |
| 88 | clamps/saddle for PVC pipe. |
| 89 | PVC floor traps 100 mm complete job |
| 90 | P/F gun metal ball valve of approved quality. |
| 91 | ElectrificationWiring for Light point/Fan point/Exhaust fan point/Bell point with (P+N+E) 3x1.5 sq.mm. FRLS-H PVC insulated Muti strand Copper conductor single core cable. Havells/Polycab/Finolex/Eq Make) in surface/recessed conduits laid in slabs (Including Cost of Conduit 25mm) with 1No.of 6 Amp Modular Switch, Modular Plate, Cover in front & suitable Gl box etc ISO/IEC Certified/Schneider/Havells/Legrand/Anchor roma plus/ABB/Eq.Make& along with 2.5 Sqmm (P+N+E) Circuit Wire of same make as mentioned above & items shall be approved before execution of work by SDO.Incl.Cost of Conduit/Channel. |
| 92 | Wiring for Power Plug with (P+N+E) 3 x 4 sq.mm FRLS-H PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit (Havells/Anchor/Eq. Make) Incl.Cost of Conduit/Channel. |
| 93 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required, ISO/IEC Certified (Legrand/Anchor roma plus/Schneider/ABB/Eq. Make) & shall be approved before execution of work by SDO. |
| 94 | Wiring for 6amp Plug(Computer Point) with (P+N+E) 3 x 2.5 sq.mm FRLS-H PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit (Havells/Anchor/Eq. Make) |
| 95 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings), ISO/IEC Certified Havells/Legrand/Anchor roma plus/Schneider/ABB/Eq. Make & shall be approved before execution of work. |
| 96 | Providing/Fixing/Testing and Commissioning of 6Amp to 32Amp Rating SP,240V,‘C’ Curve 10K, Miniature Circuit Breaker suitable for inductive load of following poles in existing MCB DB complete with connections. (L&T/Siemens/Legrand/Havells/ABB/Eq. Make) |
| 97 | Supply/Fixing/Testing and Commissioning of following rating, Double pole, (P+N) 240 V, C* Curve 10K,Miniature Circuit Breaker (MCB) in the existing MCB DB complete with connections. (L&T/Siemens/Legrand/Havells/ABB/Eq Make) 63 Amp. |
| 98 | 40 Amp |
| 99 | 100 Amp DP.for main supply. |
| 100 | Supplying and Fixing of MCB 4 way (4+12) , horizontal typed , sheet steel, Double Door Distribution Board, TPN 240V/415 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (L&T/Siemens/Legrand/Schneider/ABB/Eq. Make) |
| 101 | Supply/Installation/Testing and Commissioning of 15W + LED Conceal (Commercial Type) light luminary fitting round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70,. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV.Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/government of India authorised lab.The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years,which includes replacement of fixtures of Philips/Havells/Wipro/Halonix/Eq Make.as approved by SDO. |
| 102 | Supply/Laying/Connecting and Commissioning of 25 sq.mm 2-Core XLPE/PVC insulated and Steel armoured 1.1 KV grade Aluminum Cable of Havells/Polycab/Eq. Make with required size of thimbles duly crimped by hydraulic crimping tool including Providing/Fixing of saddles/clips with making of connection and partially to be laid underground through DWC High Density Poly ethylene Pipe having Corrugation on Outer wall and Plain surface inner wall Conforming to IS: 14930 Part-1 and 2 Complete with accessories for Protection of 1.1 KV Grade under Ground cable Directly in Ground at a Depth of 50 CM including excavation and Refilling the Trench . (Material to be approved before execution) |
| 103 | 2 x 10 sq mm + 1x 6 sq mm earth wire for Supply from one DB to other. |
| 104 | Supply/Installation/Testing and Commissioning of 225-250mm Shutter Tyed 320 Cu.m/Hr.AC 220-240 Volts,50 Hz Exhaust fan made out of ABS Plastic Material with inbuilt thermos cut-off Protection and noise level not exceeding 37Db of Following Sizes incl.connections etc. USHA/Havells/Crompton/Eq. Make.(Min I-Star) Please Enable Macros to View BoQ information |
