|
| 1 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) not exceeding 1.50 Sqm each complete all as specified and as directed by GE. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) exceeding 1.5 sqm & not exceeding 4 sqm each complete all as specified and directed by GE. |
| 3 | Taking down shutters of any description exceeding 1 sq.m and not exceeding 2 sqm each complete all as specified and directed by GE. |
| 4 | M & L for framed work as in doors or gates of angles or others section with gusset plate rails ,braces etc, copleate drilling, for fixing of steel sheeting or others covering. Doors etc to be prepared for hanging or sliding with and including eithers hooks and hinges or steel hanging door fittings all as specified by GE. |
| 5 | S & F in 30mm thick flush shutters door solid core constructions with block board core any plywood face panels commercial type on both face is covered with decorative face veneer with lipping/frame to match. |
| 6 | M & L for 2nd Class hard wood 35mm thick factory made glazed and skelton shutters open rebated and prepared to receive glass , gauze,etc (without sash bars) edges of framing plain , chamfered or rounded. Fitted with cut and mitred beads for securing wiremesh supplied and fitted to chowkats complete all as specified and directed by GE. |
| 7 | M &L for Solid PVC door/cup board frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening complete all as specified and directed by GE. |
| 8 | M & L for Factory made solid panel PVC door/cup board shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, suippling and fixing in the frame at site as per specification in SSR Part-I. complete all as specified and directed by GE. |
| 9 | cccfor Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with 2nd class soft wooden beadings all as specified and directed by GE. |
| 10 | M & L Fixed in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with 2nd class soft wooden beadings or fixed with screws to Iron framed windows all as specified and directed by GE. |
| 11 | S & F for Butt Hinges medium weight cold rolled mild steel of size 100 mm complete all as specified and directed by GE. |
| 12 | S & F for 150 mm size mild aluminium handles cast type anodised complete all as specified and directed by GE. |
| 13 | S & F for 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by GE. |
| 14 | M & L 150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by GE. |
| 15 | S & F for 300 mm size Mild steel stove enamelled helical door spring fixed to Pressed steel frame / chowkhats including necessary welding complete all as specified and directed by GE. |
| 16 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads all as specified and directed by GE. |
| 17 | S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in square n/exc 0.5 Sqm each pane all as specified and directed by GE. |
| 18 | S & F for 3mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm each all as specified and directed by GE. Please Enable Macros to View BoQ information |
| 19 | S & F for 3mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm each all as specified and directed by GE. Please Enable Macros to View BoQ information |
