|
| 1 | Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for keys, scrubbing down with water etc, complete as specified and as directed. |
| 2 | Material and labour for rendering 5mm thick on fair faces of brick work or concrete surface on ceiling plaster in CM 1:3 finished even and smooth without using extra cement complete all as specified and as directed. |
| 3 | Material and labour for preparation of new surfaces of plastered or unplastered ceiling and applying three coats of white wash complete all as specified and as directed. |
| 4 | Material and labour for rendering 15mm thick on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathinge in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed |
| 5 | Material and labour for preparation of new plastered surfaces of wall and apply of two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 6 | Material and labour for complete removal of existing treatment by mechanical means including preparation of old surfaces of wall and applying two coats oil bound distemper over a coat of primer complete all as specified and as directed by Engr-in-Charge. |
| 7 | Material and labour for complete removal of existing treatment by mechanical means including preparation of old surfaces of wall and applying two coats of oil bound distemper over 3mm thick wall care putty (1.5mm thick each coat) complete all as specified and as directed by Engr-in-charge. |
| 8 | Material and labour for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint using mechanical means complete all as specified and as directed. |
| 9 | Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint using mechanical means complete all as specified and directed. |
| 10 | Material and labour for preparation of old decorated plastered or unplastered surfaces of wall, brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent, trading oil, greasy spots and applying one coat oil bound distemper complete all as specified and as directed by Engr-in-charge. |
| 11 | Material and labour for preparation of old decorated plastered or unplastered surfaces of wall, chajja, balcony, facia etc., brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent, trading oil, greasy spots and applying one coat of white wash complete all as specified and as directed by Engr-in-charge. |
| 12 | Material and labour for preparation of old decorated plastered or unplastered surfaces of ceiling, brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent, trading oil, greasy spots and applying one coat of white wash complete all as specified and as directed by Engr-in-charge. |
| 13 | Supply and fix in repairs 300mm, ordinary mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 14 | Supply and fix in repairs 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed. |
| 15 | Supply and fix in repairs 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed |
| 16 | Supply and fix in repairs 100mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed |
| 17 | Supply and fix in repairs floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor overall 140mm complete all as specified and as directed. |
| 18 | Supply and fix in repairs aluminum handles cast type anodised 150 mm long complete all as specified and as directed. |
| 19 | Supply and fix in repairs aluminum handles cast type anodised 100 mm long complete all as specified and as directed. |
| 20 | Supply and fix in repairs butt hinges 75mm long medium weight cold rolled stainless steel complete all as specified and as directed. |
| 21 | Supply and fix in repairs 100mm long butt hinges medium weight cold rolled stainless steel, fixed to wooden frame/ welded to metal frame complete all as specified and as directed |
| 22 | Supply and fix 5mm thick rubber beading strips of entrance doors having width exc 3cm but not exc 5cm to arrest entry of insects including taking down existing one complete all as specified and as directed |
| 23 | Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm complete including taking down existing one complete all as specified and as directed. |
| 24 | Supply and fix 25mm dia mild steel powder coated drapery rod out to length required without joint in between and fixed at openings including taking existing one complete all as specified and as directed by Engr-in-charge. |
| 25 | Supply and fix mild steel powder coated brackets for holding the drapery rod and fixed to wall with MS screw including taking down existing one complete all as specified and as directed by Engr-in-charge. |
| 26 | Supply and fix mild steel powder coated fancy type brackets fixed at both the end of drapery rod of same colour and type of drapery rod complete all as specified and as directed by Engr-in-charge. |
| 27 | Supply and fix in repairs 100mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed. |
| 28 | Supply and fix in repairs stainless steel peg set of having 5 pegs powder coated fixed to wall surface with pvc plug and screw complete all as specified and as directed. |
| 29 | Material and labour for 4mm thick sheet glass ordinary quality and glazing with oil putty in squares or rectangular not exceeding 0.5 Sqm each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frames/ steel frames glazed with putty or fixed with beads complete all as specified and as directed by Engr-in-charge. |
| 30 | Material and labour for preparation of plastered or unplastered old surfaces of walls, Chajja, balcony, facia etc. by brooming down or steel wire brushing scrapping down, smoke shoots moulds, mass efforescent salt, treating oil and greasy spots etc and applying one coat of cement based paint complete all as specified and as directed. |
| 31 | Note for Item No 30: (i) Before applying cement based paint ,the surface shall be thouroughly wetted to control surface suction. The surface shall be moist but not dripping wet when the paint applied. Surfaces which readily absorb moisture shall be wetted in one operation not more than one hour before painting. Surfaces which absorb moisture slowly shall be wtted in at least two operations not less than 30 minutes apart. |
| 32 | (ii) To maintain a uniform mixture and to prevent segregation ,the paint shall be stirred frequently in the bucket.(iii) Painting surfaces shall be cured as soon as paint has hardened so as not be to damaged by the spray about 12 hours after the applications. Please Enable Macros to View BoQ information |
| 33 | (ii) To maintain a uniform mixture and to prevent segregation ,the paint shall be stirred frequently in the bucket.(iii) Painting surfaces shall be cured as soon as paint has hardened so as not be to damaged by the spray about 12 hours after the applications. Please Enable Macros to View BoQ information |
