|
| 1 | Taking down carefully existing aluminium or copper point wiring (light, fan, socket, bell or power) including all associated fixtures and fittings such as switches, ceiling roses, regulators, sockets, lamp/angle holder etc and making good the disturbed surfaces to an even and smooth finish using cement mortar 1:3 and applying white/colour wash to match the existing surface complete all as specified and directed. |
| 2 | M&L for point wiring with 1100 Volts grade PVC insulated FRLS multi-stranded copper conductor cable 1.5 sqmm including PVC insulated FRLS copper earth continuity conductor 1.5 sqmm, colour-coded as per IS, drawn through and including concealed rigid non-metallic PVC conduit, medium grade, ISI marked, ivory colour of size not less than 25 mm dia with all necessary conduit fittings and accessories such as bends, tees, couplers, junction boxes etc including concealed sunken modular GI metal box of minimum 1.0 mm thickness with approved colour modular mounting polycarbonate front plate and ABS under plate with CRCA metal frame and zinc-plated steel screws suitable for mounting modular switches, sockets, regulators etc complete for the following:–(a) One light or one fan point controlled by one switch. |
| 3 | All as item No 2 above but one bell/ buzzer point controlled by one bell push complete all as specified and directed |
| 4 | All as item No 2 above but one socket outlet 6 Amp controlled by one switch on the same board with other switches complete all as specified and directed |
| 5 | All as item No 2 above but one socket outlet 6 Amp controlled by one switch on indepdendent board complete all as specified and directed |
| 6 | M&L for point wiring with 1100 Volts grade PVC insulated FRLS multi-stranded copper conductor cable 2.5 sqmm, including PVC insulated FRLS copper earth continuity conductor 2.5 sqmm, colour-coded as per IS, drawn through and including concealed rigid non-metallic PVC conduit, medium grade, ISI marked, ivory colour, of size not less than 25 mm dia, with all necessary conduit fittings and fixing accessories, including sunken GI metal box of minimum 1.0 mm thickness with approved colour modular mounting polycarbonate front plate and ABS under plate with CRCA metal frame and zinc-plated steel screws suitable for mounting modular accessories, complete for one 6A or 16 A socket outlet point controlled by one switch on independent board complete all as specified and directed |
| 7 | M&L for point wiring with 1100 Volts grade PVC insulated FRLS multi-stranded copper conductor cable 1.5 sqmm including PVC insulated FRLS copper earth continuity conductor 1.5 sqmm, colour-coded as per IS, drawn through existing rigid non-metallic PVC conduit/casing caping , medium grade, ISI marked, ivory colour of size not less than 25 mm dia with all necessary conduit fittings and accessories such as bends, tees, couplers, junction boxes etc including concealed sunken modular GI metal box of minimum 1.0 mm thickness with approved colour modular mounting polycarbonate front plate and ABS under plate with CRCA metal frame and zinc-plated steel screws suitable for mounting modular switches, sockets, regulators etc complete for the following:–(a) One light or one fan point controlled by one switch. |
| 8 | All as item No 7 above but one socket outlet 6 Amp controlled by one switch on the same board with other switches complete all as specified and directed |
| 9 | All as item No 7 above but one socket outlet 6 Amp controlled by one switch on indepdendent board complete all as specified and directed |
| 10 | M&L for point wiring with 1100 Volts grade PVC insulated FRLS multi-stranded copper conductor cable 2.5 sqmm, including PVC insulated FRLS copper earth continuity conductor 2.5 sqmm, colour-coded as per IS, drawn through existing rigid non-metallic PVC conduit/casing caping, medium grade, ISI marked, ivory colour, of size not less than 25 mm dia, with all necessary conduit fittings and fixing accessories, including sunken GI metal box of minimum 1.0 mm thickness with approved colour modular mounting polycarbonate front plate and ABS under plate with CRCA metal frame and zinc-plated steel screws suitable for mounting modular accessories, complete for one 6A or 16 A socket outlet point controlled by one switch on independent board. |
| 11 | S&F modular one-way switch, 10 Amp, 1-module size of approved make, with all necessary fixing accessories and electrical connections complete all as specified and directed |
| 12 | S&F modular one-way switch, 16 Amp, 1-module size, of approved make, with all necessary fixing accessories and electrical connections complete all as specified and directed |
| 13 | S&F modular socket outlet, 6 Amp, 2/3 pin combined, 2-module size, of approved make with all necessary fixing accessories and electrical connections complete all as specified and directed |
| 14 | S&F modular socket outlet, 6/16 Amp, 2/3 pin combined, 2-module size, of approved make with all necessary fixing accessories and electrical connections complete all as specified and directed |
| 15 | S&F modular bell push single pole one way 6/10 Amp, 240 volt,1 module, fuesh type complete all as specified and directed |
| 16 | S&F electronic type modular fan regulator of 120 W rating, 2 module suitable for 230 V, 50 Hz AC supply, including making necessary connections complete all as specified and directed |
| 17 | S&F ceiling rose, 3-plate type, with insulated polycarbonate body, of approved make with all necessary fixing accessories and electrical connections complete all as specified and directed |
| 18 | S&F call bell AC single pole 240 volt ding dong Type complete all as specified and directed |
| 19 | S&F angle type holder insulated body with back plate suitable for batten fittings complete all as specified and directed |
| 20 | Supply and fix in replacement LED 35-40 watt light pureline slim suspended 50mm with suspended (hanging type) accessories CRCA WHITE POWDER COATED ,50000 BURNIG HOURS , IP20 and Ik02 linear lighting luminaries with superior white powder coated finish, multiply option options of lights distrubution run length and luman packages for diffrent application to choose white colour higher energy saving decorative ultra slim square profile LED lighting fixture enviromental friendly, energy efficient complete all as specified and directed |
| 21 | Supply and fixing in replacement of SmartGlow 2x2PANEL SENSOR LIGHT recessed/surface type is an intelligent office lighting system with an inbuilt sensor thus avoids unwanted hassle of creating space for sensors. The inbuilt sensor helps save additional 40%* energy as compared to other LED panels. The luminaire also provide 360Deg coverage around 8 ft area, High on aesthetics, SmartGlow delivers superior performance, is easy to install and has a long life of 50,000 hours (L70B50). It also has very good payback period of less than 1.5 years, System wattage: 37W with system lumen of 3700lm, system efficacy>100lm/watt, Housing made with CRCA material, high transmittance PC diffuser to provide uniform light intensity distribution, IP20, THD<10%, available CCT: 4000K/5700K/6500K, CRI>80, PF>0.90, Operating voltage: 220-240Vac at rated frequency of 50Hz. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Both the fixture and Driver should have separate BIS approval. including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified and directed |
| 22 | Supply & fixing in replacement of bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 protection cover suitable for bulk head fitting integrated type 6.5 W LED, 6000K , 105 lumens/watt including inbuilt electronic driver complete all as specified and directed |
| 23 | Supply & fix in replacement of LED Ceiling /surface mounted down lighter warm white / white colour,12 to18 watt round/ squre profile,including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified and directed . |
| 24 | Supply and fixing in replacement of wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V , minimum 100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrngements complete all as specified and directed |
| 25 | Supply and fixing in replacement microwave sensor based integrated LED tube light fittings 1200 mm with factory set dimming profiles of 50% and 100% light dimms to these levels in case occupacy is not detected , 18/20 W,110L/W 25000 BURNING HOURS higher energy saving decorative ultra slim square profile LED lighting fixture with extruded alumium housing without powder coating enviromental friendly, energy efficient complete all as specified and directed |
| 26 | Supply and Fixing in replacement of wall/surface mounting luminaires integrated LED Batten 20/22 W, 6500/4000 K/3000K,120 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver, 25k burning hours ,2.5 KV surge protection complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed |
| 27 | S& F in replacement of Decorative wall light fixture made up of Metal base, synthetic white in colour and square/round metal base with bend pipe and glass globe with nickel finish, ( B-22/E27 base), with 01 No. 7/9 W LED Bulb, 230 V, 6000K, complete incl all required electrical connecting arrangements complete all as specified and directed |
| 28 | S& F in replacement of Decorative wall bed light fixture made up of Metal base, synthetic white in colour and round metal base with bend pipe integrated LED type, 230 V, 3000K, complete incl all required electrical connecting arrangements complete all as specified and directed |
| 29 | S&F in replacement of surface type round/Square LED 10/12W downlighter 6500K 2.5 KV inbuit surg protection minimum 110 lumens/watt, 50k burning hours aliminium PDC complete all as per specified and directed. |
| 30 | S&F in replacement of Flexiion 5 Mtr LED strip 22 W, 3000K/6000K as required on site with driver with wide viewing angle for good light distribution, easy to install complete all as specified and directed |
| 31 | S&F in replacement of outdoor type Flexiion 50Mtr LED strip IP65 Water-Proof Rope and Strip Light, 3000K/6000K as required on site with driver with wide viewing angle for good light distribution, easy to install complete all as specified and directed |
| 32 | Supply and fixing in replacement of LED lamp 9/10/12 watt complete all as specified and as directed. |
| 33 | S&F in replacement of super bright LED (2X2), 36 W, 6500 K recess mounting minimum 100Lumens/watt IP20 ,IK02 PF>.9 and 4kv inbuilt surg protection with high efficent LED source complete all as specified and directed |
| 34 | Supply and fixing in replacement of FTL fittings with decorative LED batten made up of aluminium casting 18/20 W of size complete standard fittings and fixtures including fixing on walls/roofs/ through MS downrod suspended type with fitting arrangement including neccessary elect connection from ceiling rose to luminaries with suitable size PVC cord complete all as specified and directed |
| 35 | Supply and fixing in replacement of Material glass/plastic body led tube ,voltage range 220-240v-50hz ,cct 6500k,lumen ,wattage 20/22W surge 2.5kv ,CRI 70 POWER FACTOR >_0.9 ,BURING HOURS 25K HOURS 110 L/W ,6000 K with high efficency, with neccessary electrical connection incl disconnection old elecronic ballast if any complete all as specified and directed |
| 36 | Supply only highly durable built -in LI-ION LED bulb invereter rechargable type having backup time of 3 to 4 hours 12/14 Watts suitable for B22 white in colour with one year warranty complete all as specified and directed |
| 37 | Supply only highly durable built -in LI-ION LED bulb inverter rechargable type having backup time of 3 to 4 hours 15/18/20 Watts suitable for B22 white in colour with one year warranty complete all as specified and directed |
| 38 | Taking down carefully sub-main wiring any type including dismantling of accessories and making good disturbed surfaces to match the existing complete all as specified and directed |
| 39 | S&F sub main wiring with two single core PVC FRLS insulated multistranded copper conductor of size 4 sqmm nominal cross sectional area and one run of 4.0 sqmm nominal cross sectional area PVC FRLS insulated multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed.NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire. |
| 40 | S&F sub main wiring with two single core PVC FRLS insulated multistranded copper conductor of size 6 sqmm nominal cross sectional area and one run of 6.0 sqmm nominal cross sectional area PVC FRLS insulated multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 25mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed.NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire. |
| 41 | S&F sub main wiring with two single core PVC FRLS insulated multistranded copper conductor of size 4 sqmm nominal cross sectional area and one run of 4.0 sqmm nominal cross sectional area PVC FRLS insulated multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 20mm dia 'medium grade' PVC existingconduits (ISI marked) and fittings complete all as specified and directed.NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire. |
| 42 | Supply and fixing in replacement for 1.5 sqmm single core copper, multistandard PVC insulated (FRLS) unsheathed, cable 1100 volts grade complete all as specified and directed. |
| 43 | Supply and fixing in replacement for 2.5 sqmm single core copper, multistandard PVC insulated (FRLS) unsheathed, cable 1100 volts grade complete all as specified and directed. |
| 44 | Supply and fixing in replacement for 4 sqmm single core copper, multistandard PVC insulated (FRLS) unsheathed, cable 1100 volts grade complete all as specified and directed . |
| 45 | S & F in replacement of three core PVC insulated FRLSH sheathed cable with 1.5 sqmm stranded copper conductor complete all as specified and as directed. |
| 46 | S&F in replacement 1100V grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection ,one twin core cable flat or circular strande 10 sqmm aluminiuam conductor complete all as specified and as directed. |
| 47 | S&F in replacement of sheet metal enclosure for MCB DB double door type, triple pole and neutral 4 way 415Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, IK09, True IP 43 (with PU Gasket) with test certificate ,factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed . |
| 48 | S&F in replacement of sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, IK09, True IP 43 (with PU Gasket) with test certificate factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed |
| 49 | S&F in replacement of sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated,IK09, True IP 43 (with PU Gasket) with test certificate factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed |
| 50 | S&F in replacement of sheet metal enclosure for MCB DB double door type, single pole and neutral 4 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, IK09, True IP 43 (with PU Gasket) with test certificate factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed |
| 51 | Supply and fixing in replacement of modular type AC box with socket plug top and MCBs with two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed |
| 52 | S&F in replacement of double door VTPN 4 way double door suitable for 4 pole MCCB 63-125A, 415 V as incoming & SP/TP MCB as outgoing 200 Amps rated Busbar, inter connection link, cable ties,earth bar IK09, True IP 43 (with PU Gasket) with test certificate etc incl necessary civil works and electrical connections with suitable lugs/spreader links complete all as specified and directedNote: MCCB & MCB to be measured and paid seprately |
| 53 | S&F in replacement of recessed type round/Square type LED 10/12W downlighter 6500K 2.5 KV inbuit surg protection minimum 110 lumens/ watt, 25k burning hours aliminium PDC complete all as specified and directed |
| 54 | Supply and fixing in replacement of PVC casing and caping,15/ 20mm wide complete all as specified and directed |
| 55 | S & F in replacement of switch piano flush button single pole one way 5/6 Amp 240 volt complete all as specified and directed . |
| 56 | S & F in replacement of switch piano flush button single pole one way 15/16 Amp 240 volt 2 hole/4 hole complete all as specified and directed |
| 57 | S&F in replacement of socket outlet flush type multipurpose 2 in 1, 3 pin 5/6 and 15/16 Amp, 230 volts 2 hole/4 complete all as specified and directed |
| 58 | S&F in replacement of unservicable socket outlet flush type multi purpose 2 in 1, 6pin 5 .Amp, 230 volts complete all as specified and directed |
| 59 | S&F in replacement of switch socket outlet combination flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts 2 hole/4 complete all as specified and directed |
| 60 | S&F in replacement of call bell AC single pole 240 volt ding dong Type complete all as specified and directed |
| 61 | S&F in replacement high range, cordless call bell with wireless remote including batteries complete all as specified and directed |
| 62 | S&F in replacement angle/batten type holder insulated body with back plate suitable for batten fittings complete all as specified and directed |
| 63 | S&F in replacement PVC gang box fitted with and including piano type switch 5 A and socket 5 A, 230 Volts complete with pvc gitties and screws complete all as specified and directed |
| 64 | S&F in replacement PVC gang box fitted with and including piano type switch 15 A and socket 15 A, 230 Volts complete with pvc gitties and screws complete all as specified and directed |
| 65 | S & F in replacement of rectangular laminated hylum sheet top cover for switch sockets of size' (125mmx125mmx3mm) complete all as specified and directed |
| 66 | All as item No 65 above herein before but (200mmx125mmx3mm) complete all as specified and directed |
| 67 | All as item No 65 above here in before but (225mmx275mmx3mm) complete all as specified and directed |
| 68 | S&F in replacement modular switches 1 way 6A,1 module. complete all as specified and as directed. |
| 69 | S&F in replacement modular switches 1 way 16A,1 module,complete all as specified and as directed. |
| 70 | S&F in replacement modular 6 A sockets-5 pin 2 module complete. complete all as specified and as directed. |
| 71 | S&F in replacement modular 6A/16A sockets-3/5 pin combine 2 module complete all as specified and as directed. |
| 72 | S&F in replacement Modular white cover plate with frame 8 module complete all as specified and as directed. |
| 73 | S&F in replacement Modular white cover plate with frame 6 module complete all as specified and as directed. |
| 74 | S&F in replacement Modular white cover plate with frame 4 module complete all as specified and as directed. |
| 75 | S&F in replacement Modular white cover plate with frame 3 module complete all as specified and as directed. |
| 76 | S&F in replacement Modular white cover plate with frame 2 module complete all as specified and as directed. |
| 77 | S&F the insulation tape 10 Mtr complete all as specified and directed |
| 78 | S&F the insulation tape 15 Mtr complete all as specified and directed |
| 79 | S&F the insulation tape 25 Mtr complete all as specified and directed |
| 80 | Supply and fixing in replacement for flexible wire twin core copper, multistandard PVC insulatedunsheathed, cable 1100 volts grade complete all as specified and directed |
| 81 | Supply and fix in replacement modular type blanking plates, one moudle complete all as specified and directed. |
| 82 | Material and labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed. |
| 83 | M & L for replacement of TPN MCB 100 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity complete conforming to IS 8828, IEC 60898 complete all as specified and directed |
| 84 | M & L for replacement of TPN MCB 63 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity complete conforming to IS 8828, IEC 60898 complete all as specified and directed |
| 85 | M&L in replacement of SP MCB 6 TO 32 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity and terminal box suitable upto 35 sqmm cable complete conforming to IS 8828, IEC 60898 . |
| 86 | M&L in replacement of MCB Single Pole & Neutral MCB 32 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity and terminal box suitable upto 35 sqmm cable complete conforming to IS 8828, IEC 60898 complete all as specified and directed |
| 87 | M&L in replacement of MCB Single Pole & Neutral MCB 40 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity and terminal box suitable upto 35 sqmm cable complete conforming to IS 8828, IEC 60898 complete all as specified and directed |
| 88 | M&L in replacement of MCB Single Pole & Neutral MCB 63 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity and terminal box suitable upto 35 sqmm cable complete conforming to IS 8828, IEC 60898 complete all as specified and directed |
| 89 | Supply and fixing in replacement of MCCB current rating 63 Amps with thermal magnetic release, 4 pole, 415 volts AC 16 KA Ics = 50% Icu as per IEC 60947-2 ruputuring capacity all as specified and directed. |
| 90 | Supply and fixing in replacement of MCCB current rating 100 Amps with thermal magnetic release, 4 pole, 415 volts AC 16 KA Ics = 50% Icu as per IEC 60947-2ruputuring capacity complete all as specified and directed |
| 91 | Supply and fixing in replacement of MCCB current rating 125 Amps with thermal magnetic release, 4 pole, 415 volts AC 16 KA Ics = 50% Icu as per IEC 60947-2ruputuring capacity complete all as specified and directed |
| 92 | S & F in replacement of GI pipe light grade, 32 mm bore, 1.20 mtr long bend in required shape, MS clamp 40x3mm thick duly painted with two coats of synthetic enemal paint fixed on wall including bolts and nuts complete all as specified and directed |
| 93 | S&F in replacement of 50 W flood light LED fitting Warm/day/RGBW cool as required, IP 65 protection, minimum 100 lumens/watt with high power LED complete with including provn of flexible three core cable from ceiling rose to fitting terminal for making electrical connection, fixing the fitting on wall including all necessary fixing accessories with nuts and bolt complete all as specified and directed . |
| 94 | S&F in replacement of LED Building security light 20/25 Watt with high power LED source (>120 lumen/watt) PDC housing, IP66 and IK 08 with 4 KV inbuilt surge protection ,minimum 50000 burning hours hv cutoff@325/440 volt protection for 8 hours including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified and directed |
| 95 | Supply and fix in replacement of LED gate light of 40/45W LED Postop luminaire with aluminium pressure die-cast mounting spigot & polyester powder coating in addition to a specific weathering resistance treatment, color RAL7011. Non-yellowing transparent Polycarbonate UV-protected round symmetrical diffuser with circular radial pattern for glare-free and even light distribution. High Efficiency long life LED module with efficacy of >100Lm/W, CCT 4000K, and CRI >70. Powered by built-in electronic driver with THD <10%, 4kV inbuilt surge protection, high cut-off at 325V & auto-restart, including 8hrs. protection from 440V (P2P). Incl GI Pipe 40mm dia 0.45mtr long fixed in gate pole with PCC 1:2:4 of 0.20 mtr height and size of existing gate pole. Fixture lumen efficacy >4500 Lm, IP66 (no glue), IK05, PF>0.95, Operating voltage range: 140- 277V, complete all as specified and directed |
| 96 | Supply and fixing in replacement of Solar integral AIO Post-top luminaire with solid polycarbonate housing, reliable &robust construction with IP65 protection, suitable for pole entry dia of 60mm, having Min 3000system lumens, suitable for 12hrs (Dim mode) Autonomy. Lighting mode selectable for 2H/4H/6Halong with the CCT 3000K/4000K/6500K by remote. Lithium Pherrophosphate Battery [email protected]. Panel capacity min 13Wp, CRI >=70, System Efficacy >165Lm/W & systemwattage should not be more than 18W ± 2%, if wattages increases then the size of battery & panelshall also be increased in similar percentage to maintain equal autonomy of the system. MicrowaveMotion Sensor 5.8GHz, <=25mW. Life class of LED System 25000hrs@L70. LED Make: CREE/NICHIA/ LUMILEDS/ OSRAM. CE Certified, charger efficiency >90%. The PV module should bemade up of crystalline silicon solar cells \\"Mono-Crystalline\\" and must have a certificate of testingconforming to IEC 61215 Edition II / BIS 14286 & IEC 61730-1,2 IEC60598, Operating temp0℃ to 55℃, certifying above given parameters all reports shall be from In-house NABL or IECQ or any international accredited Laboratory complete all as specified and directed |
| 97 | S & F in replacement of integrated LED type Post top lantern with high power 25/30 W LED as light source, energy saving, environmental friendly, long life asethetically designed with symmetrical light distribution,spun auminium landscape lumainaire incl LED driver complete and incl neceesary electrical connection complete all as specified and directed |
| 98 | S&F in replacement of LED security light fixture 25 to 35 Watt with powder-coated pressure die-cast aluminium body complete with potted metallic driver suitable for input voltage 140–270 Volts AC, 50 Hz, operating temperature –15°C to +50°C, provided with internal surge protection minimum 4 kV (L–N–E) as per IEC 61000-4-5, driver efficiency >85%, THD <10% as per IEC 61000-3-2, power factor ≥0.95, IP-66 protection and IK-10 impact resistance, CRI >80, system lumen efficacy ≥120 lm/W with under-voltage and over-voltage protection, EMI/EMC compliance as per CISPR-15, and optical lenses for beam angle as per IESNA Type I / II / III, as required. The luminaire shall have minimum rated life of 50000 burning hours for LED with 70% lumen maintenance at end of life supported by LM-80 extrapolation and IES TM-21-11 report, CCT 5700K / 6000K / 6500K (ANSI bin), SDCM <5, and maximum power consumption not exceeding rated wattage. The fixture shall conform to relevant BIS standard and shall include all accessories, fixing arrangements, internal wiring with suitable size FRLS PVC insulated copper conductor cable, connections and earthing, complete in all respects, with minimum 5-year OEM warranty. LM-79 (luminaire) and LM-80 (LED source) test reports from NABL-accredited laboratory, as required under BIS for LED luminaires shall be submitted complete all as specified and directed |
| 99 | S&F in replacement of LED surface-mounted batten light fitting, 16 Watt, CRCA sheet phosphated and powder coated body, construction conforming to IS:10322 (Part-1) / IEC 60598-1 with high transmitivity PC diffuser and replaceable metallic driver (driver efficiency ≥85%), system lumen efficacy ≥120 lm/W, suitable for AC 140–270 Volts, 50 Hz, operating temperature –15°C to +40°C. The luminaire shall be provided with internal surge protection minimum 4 kV, short-circuit and open-circuit protection, THD <10%, power factor ≥0.95, IP-20 protection, CRI >80, and flicker ≤5%. The LED shall have a minimum rated life of 50000 burning hours with 70% lumen maintenance at end of life. The CCT shall be 5700K / 6000K / 6500K (ANSI bin) with SDCM <3 and maximum power consumption shall not exceed the rated wattage. The luminaire shall conform to relevant BIS standards and bear a valid BIS Trade Mark Certificate (TC). Manufacturer’s name/ word mark shall be engraved / embossed / screen-printed on the housing. The item includes internal wiring with suitable size FRLS PVC insulated copper conductor cable, all connections, earthing, fixing accessories, and is complete in all respects with minimum 5-year OEM warranty. LM-79 (luminaire) and LM-80 (LED source) test reports from a NABL-accredited laboratory, as mandated under BIS for LED luminaires shall be submitted complete all as specified and directed |
| 100 | S&F in replacement of LED surface-mounted batten light fitting, 9/10 Watt, CRCA sheet phosphated and powder coated body, construction conforming to IS:10322 (Part-1) / IEC 60598-1 with high transmitivity PC diffuser and replaceable metallic driver (driver efficiency ≥85%), system lumen efficacy ≥120 lm/W, suitable for AC 140–270 Volts, 50 Hz, operating temperature –15°C to +40°C. The luminaire shall be provided with internal surge protection minimum 4 kV, short-circuit and open-circuit protection, THD <10%, power factor ≥0.95, IP-20 protection, CRI >80, and flicker ≤5%. The LED shall have a minimum rated life of 50000 burning hours with 70% lumen maintenance at end of life. The CCT shall be 5700K / 6000K / 6500K (ANSI bin) with SDCM <3 and maximum power consumption shall not exceed the rated wattage. The luminaire shall conform to relevant BIS standards and bear a valid BIS Trade Mark Certificate (TC). Manufacturer’s name/word mark shall be engraved / embossed / screen-printed on the housing. The item includes internal wiring with suitable size FRLS PVC insulated copper conductor cable, all connections, earthing, fixing accessories, and is complete in all respects with minimum 5-year OEM warranty. LM-79 (luminaire) and LM-80 (LED source) test reports from a NABL-accredited laboratory, as mandated under BIS for LED luminaires shall be submitted complete all as specified and directed Please Enable Macros to View BoQ information |
| 101 | S&F in replacement of LED surface-mounted batten light fitting, 9/10 Watt, CRCA sheet phosphated and powder coated body, construction conforming to IS:10322 (Part-1) / IEC 60598-1 with high transmitivity PC diffuser and replaceable metallic driver (driver efficiency ≥85%), system lumen efficacy ≥120 lm/W, suitable for AC 140–270 Volts, 50 Hz, operating temperature –15°C to +40°C. The luminaire shall be provided with internal surge protection minimum 4 kV, short-circuit and open-circuit protection, THD <10%, power factor ≥0.95, IP-20 protection, CRI >80, and flicker ≤5%. The LED shall have a minimum rated life of 50000 burning hours with 70% lumen maintenance at end of life. The CCT shall be 5700K / 6000K / 6500K (ANSI bin) with SDCM <3 and maximum power consumption shall not exceed the rated wattage. The luminaire shall conform to relevant BIS standards and bear a valid BIS Trade Mark Certificate (TC). Manufacturer’s name/word mark shall be engraved / embossed / screen-printed on the housing. The item includes internal wiring with suitable size FRLS PVC insulated copper conductor cable, all connections, earthing, fixing accessories, and is complete in all respects with minimum 5-year OEM warranty. LM-79 (luminaire) and LM-80 (LED source) test reports from a NABL-accredited laboratory, as mandated under BIS for LED luminaires shall be submitted complete all as specified and directed Please Enable Macros to View BoQ information |
