|
| 1 | M&L for Complete removal of existing treatment from walls, fins, chajja etc shall include brooming down or steel wire brushing, scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots and removing debris/ malba to low lying area out side of MOD land and applying 3 mm thick waterproof wall care putty to obtain even and smooth-truline surface by rubbing with sand paper complete all as specified and directed. |
| 2 | M&L for Precast cement concrete PCC 1:2:4 type B-1 block for road side curb stone as per sample approved by GE for road side curb stone and for laying and setting in CM 1:4 including demolition of old PCC curb stone complete all as specified and directed. |
| 3 | M&L for preparation of new or previously untreated plsatered or concrete surfaces and applying two coats of weather coat over a coat of primer complete all as specified and directed. |
| 4 | M&L for applying two coats of acrylic smooth exterior weatherproof (water based) paint (in camouflage pattern in CCD pattern as approved by Stn HQ) of dark colours/shade on walls (shade as approved by GE) of dark colours/shade on walls (Two coat applied @ 1.67 ltr/10 sqm per coat over and including priming coat of exterior primer (water based) applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 5 | Taking down cement plaster/grit wash from facia, walls of any description etc and removing debris/ malba to low lying area out side of MoD land complete all as specified and directed. |
| 6 | Material and labour for 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces of walls finished even and smooth w/o using extra Cement complete all as specified and directed. |
| 7 | Supply only integral water proofing compound confirming to IS 2645 – 1975.Make-Impermo, STP No. 1 |
| 8 | M&L for preparation of newly plastered surfaces of wall/roof parapets etc and applying 3 mm thick a layer of waterproof wall care putty and applying two coats of weather proof exterior emulsion (water based) paint (in camouflage pattern in CCD pattern as approved by Stn HQ) of dark colours/shade on walls (shade as approved by GE) including 1 coat of water based exterior primer on walls complete all as specified and directed. |
| 9 | M&L for preparation of old painted steel surfaces of corrugated roofing sheet and applying two coats of synthetic enamel paint (in camouflage pattern in CCD pattern as approved by Stn HQ)) of dark colours/shade (shade as approved by GE) on roofs/sheds etc complete all as specified and directed. |
| 10 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 11 | M&L for Steel work in tubular trusses and purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed. |
| 12 | M&L for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 grade 165 quality A complete all as specified and directed. |
| 13 | M&L for MS work as in post and strutt and fencing, drilled and countersunk for balusters running bars for doors balusters,noising to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts,posts and struts in fencing including cutting tops to shape as directed drilling hoes nothcing for wire etc flat iron fillets ( for securing wire mesh ) including all necessary drilling bolting or riveting etc. and similar work conforming to Fe - 290 Gde E - 165 complete all as specified and directed. |
| 14 | M&L in applying two coats of synthetic enamel paint over a coat of red oxide primer to new steel and iron surfaces over 10cm in width or girth including preparation of surfaces complete all as specified and directed. |
| 15 | Demolition of cement concrete of any description and in any position not otherwise specificially provided complete all as specified and directed. |
| 16 | M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate as in for fixing angle iron and coping including necessary form work.) complete all as specified and directed. |
| 17 | Demolition of brick or PCC block masonary built in cement and sand mortar complete all as specified and directed. |
| 18 | M&L for Brickwork with sub class \\"B\\" bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 incl demolition of brick work or stone masonry built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed. |
| 19 | Demolition of PCC cement concrete above ground floor and paving n.exc 15 cm thick (below or above ground level) un reinforced complete all as specified and directed. |
| 20 | M&L PCC 1:4:8 type D-2 (40mm graded stone aggregate ) for sub base 75mm thick complete all as specified and directed. |
| 21 | M&L for coloured exterior paver tiles 300x300x8 to12 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors over and including screed bed 20 mm thick in CM 1:6 complete all as specified and directed. |
| 22 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed. |
| 23 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of an colour having tensile strength of 550 Mpa as in roof covering fixed on curved truss, fixed with self tapping screws complete all as specified and directed. |
| 24 | M&L for providing PVDF aluminium composite panels with fire resistent mineral filled core material as in interior/exterior wall cladding upto G+2 storeyed external wall surface shall consist of following:- (I) Aluminium sheet making a total panel thickness of 3 mm with outer surface finished with PVDF based coating 0.25mm ,inner surface finished with a thin coat of polyster paint. The cleness of aluminium cover sheet shall be 0.50 mm inner core shall be of LDPE (II) MS tube framing of section 25 mmx50 mm x1.50 mm thick , (III) MS grid shall not be exceed 1.0 sqm each the MS grid not more than 1 m c/c shall be fixed with MS angle 30x30x5 mm projected 150mm from surface of wall, (IV) Colour shall be approved by GE. (V) Joint shall be sealed with silicon weater proof sealing compound with help of masking Tapes. Note: Canopy,borders, projections etc will be measured in sqm for payment purpose. |
| 25 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) any thickness, including cover fillets and grid frame work complete all as specified and directed. |
| 26 | M&L for 15mm -25 mm thick WPC (wood plastic composite ) fluted panels/louvers of approved shade , texture on walls or ceilings , complete with necessary fixing adhesive, clips ,stainless steel screws and frame work including corner beading, edge treatment complete all as specified and directed. Please Enable Macros to View BoQ information |
