|
| 1 | Surface excavation n exceed 30cm deep and averaging 15 cm deep and getting out any type of soil ,complete all as specified and directed by GE. |
| 2 | Excavationover areas not exc 1.5m in depth for the foundation and getting out in any type of soil ,complete all as specified and directed by GE. |
| 3 | Excavation over area in any type of soil and exc 1.5m in depth but not exc 3.0 m in depth for foundation and getting out in any type of soil complete all as specified and directed by GE. |
| 4 | Returning filling in soil including spreading leveling watering and well ramming in layers not exceeding 25 cum ,complete all as specified and directed by GE. |
| 5 | Removal of excavated material as soils not exceeding 50m and at a level not exceeding 1.5m above the starting point and depositing .,complete all as specified and directed by GE. |
| 6 | M&L PCC 1:3:6 type D-2(40 mm graded stone agg) as in fdn , filling sub base to flooring ,mass concrete etc complete all as specified and directed by GE. |
| 7 | M&L Form work to sides of concrete fdn footing base of columns and raft beams sides and soffits (if any) of plinth beams ,complete all as specified and directed by GE. |
| 8 | M&L Form work to sides of pillars, posts, struts, pier, columns square, rectangular or polygonal rough finished surface of concrete ,complete all as specified and directed by GE. |
| 9 | M&L Form work to sides and soffits of floor or roof beams beam , lintels, cantilevers, shelves etc with rough finished ,complete all as specified and directed by GE. |
| 10 | M&L Form work to Chajjas, trough and similar items incl edges with rough finished flat all ,complete all as specified and directed by GE. |
| 11 | M&L Form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar works not exc 20 cm wide and sides of PCC/RCC bands exc 10 cm but n.exc 20 cm wide with rough finished ,complete all as specified and directed by GE. |
| 12 | M&L Reinforced cement concrete M-25 (Nominal mix) using 20 mm graded crushed stone agggregate as in foundation beam, plinth beam base for columns etc complete all as specified and directed by GE. |
| 13 | M&L Reinforced cement concrete M-25 (Nominal mix) using 20 mm graded crushed stone agggregate as in columns pillars posts etc complete all as specified and directed by GE. |
| 14 | M&L Reinforced cement concrete M-25 (Nominal mix) using 20 mm gradd crushed stone agggregate as in beams, cantilevers, bressummers, lintel over 1.5 m span ,complete all as specified and directed by GE. |
| 15 | M&L RCC (Nominal mix) M-25 as in slabs supported on walls beams and columns in floors, roofs, landings, balcony, canopies, deck slabs and in shelves and the like ,complete all as specified and directed by GE. |
| 16 | M&L RCC (Nominal mix) M-25 as in Chajjas and similar work ,complete all as specified and directed by GE. |
| 17 | M&L TMT bars (Fe 500), 10mm dia and over in reinforcement cut to length,bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (anealed) not less than 0.9mm dia or securing with clips,complete all as specified and directed by GE. |
| 18 | M&L TMT bars (Fe 500), 6 mm to 8 mm dia in reinforcement cut to length,bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (anealed) not less than 0.9mm dia or securing with clips ,complete all as specified and directed by GE. |
| 19 | All as per Ser Item No 18 here-in-before but 8 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders ,complete all as specified and directed by GE. |
| 20 | M & L for Brick work with sub class 'B' bricks having crushing strength not less than 100 kg/sqcm straight of curved on plan exceeding 6 m mean radius built in cement mortar 1:6 ,complete all as specified and directed by GE. |
| 21 | M&L Hard core of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and well rammed to a true surface ,complete all as specified and directed by GE. |
| 22 | M&L for 100 mm thick cement concrete type C-2, 1:3:6 using 40 mm graded crushed stone aggregates in sub base to floor finishes ,complete all as specified and directed by GE. |
| 23 | M&L Non-skid ceramic coloured tile 400mm x 400mm x 7mm thick (Square/rectangular) as in floors/skirting set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and as directed by GE. |
| 24 | M&L Glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed by GE. |
| 25 | M&L 75 mm thick PCC 1:3:6 type C-2 (40mm graded aggregate) as in plinth protection laid to an outward slope of not less than 1:12, cast in panels not exceeding 2.0 sqm areas with 6 mm wide joints. The joint shall be filled with mastic filling and 10 mm wide joints between the walls and plinth protection shall be filled with mastic filling and finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed by GE. |
| 26 | M&L Rendering 15 mm thick on fair face of brick work or concrete surface in CM 1:4 (with water proofing compound, WPC measured & paid seprately) finished even and smooth without using extra cement ,complete all as specified and directed by GE. |
| 27 | Supply only liquid water proofing compound/admixture. |
| 28 | M&L Rendering 15 mm thick on fair face of brick work or concrete surface in CM 1:6, finished even and smooth without using extra cement ,complete all as specified and directed by GE. |
| 29 | M&L Rendering 5 mm thick on concrete surface as in ceiling in CM 1:3 finished even and smooth without using extra cement ,complete all as specified and directed by GE. |
| 30 | M&L for pressed steel door frame of size 125 x 60 mm for door with one or more rebates including necessary fixing lugs,hinges,locks strike plate,holdfast ,2 Nos of bottom flat etc complete all as specified and directed, supplied and fixed by GE. |
| 31 | M&L PCC 1:3:6 type C-0 using 12.5 mm graded aggregates as in filling of hollow portion of pressed steel frame etc,complete all as specified and directed by GE. |
| 32 | S&F factory made 30mm thick Flush shutters, soild core construction, with particle board core and plywood face panels, both faces are covered with decorative face veener with lipping/frame to match complete, all as specified and directed by Engr-in-Charge. |
| 33 | M&L PCC 1:2:4 type B-1 using 20 mm graded aggregates as in anchoring hold fast, parapets, coping, apex plates, bed plates and the like including weathering slightly rounded or chamfered angles and throating etc. complete all as specified and directed by GE. |
| 34 | M&L MS flat iron as in cooler stand and similat work etc. complete all as specified and directed by GE. |
| 35 | S&F for Butt hinges 100 mm long, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed by GE. |
| 36 | M&L Aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixed ,complete all as specified and directed by GE. |
| 37 | M&L Aluminium, anodised, handles 150 mm of extruded section and fixed ,complete all as specified and directed by GE. |
| 38 | M&L Aluminium, anodised, barrel tower bolts 200 mm of extruded section and fixed ,complete all as specified and directed by GE. |
| 39 | M&L for preparation of new or previously untreated steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer ,complete all as specified and directed by GE. |
| 40 | M&L for preparing of new or previously untreated surfaces of wood of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer ,complete all as specified and directed by GE. |
| 41 | M&L for preparing newly plastered surfaces of wall and applying two coats of distemper oil emulsion (incl for finishing to dry dash or rough cast) over a coat of chalk whiting on plastered surfaces, preparatory to distempering ,complete all as specified and directed by GE. Please Enable Macros to View BoQ information |
| 42 | M&L for preparing newly plastered surfaces of wall and applying two coats of distemper oil emulsion (incl for finishing to dry dash or rough cast) over a coat of chalk whiting on plastered surfaces, preparatory to distempering ,complete all as specified and directed by GE. Please Enable Macros to View BoQ information |
