|
| 1 | Pointing on stone masonry in cement sand mortar 1:3 (1 cement : 3 sand) :Raised and cut pointing. |
| 2 | Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead:For thickness of tiles 25mm to 40mm. |
| 3 | Providing and fixing 1st quality MAT & GLOSSY finished ceramic tile confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). |
| 4 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 5 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. |
| 6 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). |
| 7 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 8 | Providing & fixing 12 mm thick tegular edge Glass Fibre Reinforced Gypsum False ceiling tiles of size 595 x 595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections ( galvanized @ 170 gsm/sqm.) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross “T” of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 21x21x0.30 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats fixed to ceiling with 6 mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised level clips spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer-in-Charge. |
| 9 | Cleaning of sewer line of various sizes as per requirement at site of different sizes including 100mm,150mm & 225mm dia of Stoneware pipe as per direction of Engineer-in-Charge. |
| 10 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 ltr Capacity |
| 11 | 1000 Ltr Capacity |
| 12 | For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately).Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Powder coating aluminum ( minimum thickness of powder coating 50 micron) |
| 13 | Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board Grade I, Type II conforming to IS : 12823 bonded formaldehyde synthetic resin ,of approved brand and manufacture in paneling fixed in aluminium doors ,windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge.Prelaminated particle board with decorative lamination on both sides. |
| 14 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required.0.80 mm thick with zinc coating not less than 275 gm/m2 |
| 15 | Steel work in built up tubular trusses including cutting, hoisting ( height upto 10 m)fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete.Hot finished welded type tubes. |
| 16 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete.size 600 mm X 600 mm |
| 17 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.Inside size 300 X 300 mm depth upto 0.5 M Cement cover with frame. |
| 18 | Providing and fixing stainless steel railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).Grade 304 |
| 19 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). |
| 20 | M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 21 | Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead.Depth up to 0.5 M |
| 22 | P & F Kitchen & Lab. Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor :1.0 mm thick stainless steel AISI -304 & IS 13983-1994 kitchen sink of approved make as per Engineer-in-charge with large waste coupling.24 x 18 x 8 20x16x8 |
| 23 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 110 mm dia |
| 24 | Nahni Trap with Jali 4” 110 mm Dia |
| 25 | Bend 87.5 Dg. 110mm Dia |
| 26 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 27 | Providing and fixing welded mesh/expanded metal mesh in frame work, flat iron beading 20x3mm including top cross laps inside and out sides welding, iron bolts, crews, clips etc. complete (excluding frame work) of size.Welded mesh 25 mmx 25 mm x 2.1 mm |
| 28 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 29 | Flexible (coil shaped) PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings |
| 30 | Premium qulaity WVC Urinal Flat Back (small) size 440x265x315 mm. |
| 31 | C.P. brass Urinal Flush pipe set For 1 Urinals. |
| 32 | Premium Quality white glazed vitreous china W.C. orissa pan (IS:2556 Mark) Size 580x440 mm. |
| 33 | Flushing Cistern P.V.C. 10 lts capacity ( low level ) (White) ( with fittings, accessories and flush pipe) |
| 34 | Premium quality water closet Seat Cover Solid PVC (ISI marked) grade-I White for EWC. |
| 35 | 15 mm PTMT bib cock long body with flange |
| 36 | 15 mm dia PTMT stop cock (male thread) |
| 37 | Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm outer dia. |
| 38 | Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia. |
| 39 | Pillar Cock 15 mm nominal size |
| 40 | Swan neck pillar cock 15 mm nominal size |
| 41 | Bib Cock with long thread 15 mm nominal size |
| 42 | Long body Bib Cock 15 mm nominal size |
| 43 | Angular stop cock with long thread 15 mm nominal size |
| 44 | Stop cock long thread |
| 45 | Sink cock with swinging casted spout (table mounted ) 15 mm nominal size |
| 46 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete :(-do-) wt.Not less than 600 gm, 25mm. |
| 47 | PTMT Towel Rail (450MM) |
| 48 | PTMT Towel Ring 215xd200x37mm |
| 49 | PVC Tank Cover Above 500 Lt. capacity |
| 50 | Soap Dish or Tray WVC (1st Quality, ISI Marked) recessed size 150 x 150 mm. |
| 51 | New spindle for Bib cock/pillar cock |
| 52 | Jet Spray (Premium heavy Quality) as approved by Engineer-in-Charge |
| 53 | premium qulaity WVC Wash basin Size 550 mm x 400 mm |
| 54 | C.P. brass waste coupling 40 mm |
| 55 | Grating Stainless Steel Sheet size 125mm dia. Heavy Quality |
| 56 | C.P.flange for 15mm dia taps. |
| 57 | P.V.C. Cistern fittings (Syphon, Ball cock & Handle Set) |
| 58 | Sluice valve 100mm dia |
| 59 | Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garge doors, compound wall gates etc. by welding drilling complete include. Cost of welding rods and hire charge of welding meachine and TP etc complete |
| 60 | Brass screws 50 mm |
| 61 | Brass screws 40 mm |
| 62 | Brass screws 30 mm |
| 63 | Brass screws 25 mm |
| 64 | Brass screws 20 mm |
| 65 | Brass curtain rod 20 mm dia 1.25 mm thick |
| 66 | Brass curtain rod 25 mm dia 1.25 mm thick |
| 67 | Brass brackets (curtain rods) 20 mm |
| 68 | IS 710- 1976 marked 19 mm thick commerical ply |
| 69 | IS 710- 1976 marked 12 mm thick commerical ply |
| 70 | Manpower Supply Carpenter 1st Class |
| 71 | Manpower Supply Fitter (Grade 1) |
| 72 | Manpower Supply Assistant Fitter |
| 73 | Manpower Supply Mistry |
| 74 | Manpower Supply Helper |
| 75 | Manpower Supply Sweeper |
| 76 | Manpower Supply Mate |
| 77 | Supply of Portland Cement |
| 78 | Supply of Coarse sand (zone III) |
| 79 | Supply of Stone Aggregate (Single size) : 20 mm nominal size |
| 80 | Supply of F.P.S. bricks tile class designation 100 |
| 81 | Supply of Fine sand (zone IV) |
| 82 | Supply of Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour) 18 mm thick slab, above 1500 upto 3600 cm2 |
| 83 | Supply of Kota stone slab 20 mm to 25 mm thick (semi-polished) |
| 84 | Supply of SS wire gauge |
| 85 | Ply wood 5 ply with commercial ply on both faces 6 mm thick |
| 86 | Frosted glass sheet of nominal thickness 4 mm (weighing not less than 10 kg/sqm) |
| 87 | 25 mm thick particle board |
| 88 | 30 mm thick prelaminated flush door shutter |
| 89 | Chromium plated Brass mortice latch and lock 100x65 mm with6 levers and a pair of brass lever handles |
| 90 | Hydraulic door closer bottle type M.S. body with necessary accessories and screws complete |
| 91 | Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.)With float glass panes of 5.0 mm thickness ( weight not less than 13.50 kg/sqm) |
| 92 | Providing and fixing wall panelling using soft wood frame of size 50x25mm @600 mm c/c in both directions duly treated with anti-termite treatment making grooves painting of grooves specification and drawing using :12 mm thick one side laminated board Practical board (Phenol bonded) |
| 93 | Aluminium hanging floor door stopper with twin rubber & stopper Please Enable Macros to View BoQ information |
