|
| 1 | Striping off worn out plaster and raking out joints of wall ceiling etc. up to any height & in any floor including removing rubbish within a lead of 75m as directed. |
| 2 | Plaster ( to wall, floor, ceiling etc ) with sand and cement mortar including rouding off or chamfering corners as directed and raking out joints including throating , nosing and drip course scaffolding / staging where necessary ( ground floor) (Excluding cost of chipping over concrete surface). i) with 1:4 cement mortar(ii) 15mm thick plaster |
| 3 | (c) 10 mm thick plaster |
| 4 | Removal of rubbish, earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as perdirection of Engineer in charge |
| 5 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)One Coat i) Water based interior grade Acrylic Primer |
| 6 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling includings and papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats)Standard Quality |
| 7 | Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick) |
| 8 | Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws 100 x 63 x 3.2 mm |
| 9 | Supplying ' Godrej ' mortice lock chromium plated with latch and keys 4 levers including fitting & fixing complete. |
| 10 | Supplying, fitting and fixing Godrej Multi Lock or equivallent . |
| 11 | Anodised aluminium floor door stopper. |
| 12 | Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16 mm dia rod with centre bolt and round fitting.250mm long. |
| 13 | Hydraulic door closer of approved quality as per ISI standard fitted & fixed complete.i) Medium (ISI size 2) |
| 14 | Repairs to automatic door closer including replacement of damaged main spring , oiling and adjusting as necessary including taking out and refitting the same. |
| 15 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S.(I.S.204/74) fitted and fixed with cadmium plated screw. i) 200 mm long x 10 mm dia bolt |
| 16 | Anodized aluminium D-Type handle of approved quality manufactured from extruded section conforming to I.S. Specification. (I.S.230/72) fitted and fixed complete with continuous plate base (hexagonal / round) rod.vi) 150mm grip x 10mm dia bolt |
| 17 | Supplying Solid flush type doors of commercial quality , the timber frame consisting of top and bottom rails and site stiles of well seasoned timber 65mm wide each and the enter frame fitted with 37.5mm wide battens placed both ways in order to make the door of solid core and internal lapping with Garjan or similar wood veneers using phenol formaldehyde as glue etc complete including fitting fixing shutters in position but excluding the cost of hinges and other fitting in ground floor.i) 35mm thick shutters (single leaf) |
| 18 | Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria. In ground floor. 25 mm thick |
| 19 | Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete ( in all floor for internal wall & up to 6mtr. Height for external work.4 mm thick |
| 20 | iv) 5mm thick coloured / tinted / smoke glass. |
| 21 | Wood work in posts, post plates ,fters , battens, truss, members purlins etc. fitted and fixed comlete (excluding the cost of bolts, paint but including the cost of nails, screw etc) i) Sal: Local |
| 22 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc including using of approved putty etc. on the surface if necessary.b) On steel or other metal surface With other than hi-gloss of approved quality Two coats ( with any shade except white) |
| 23 | Supplying fitting and fixing G.I. pipes of TATA make with all necessary accessories special viz. socket, bend, tee, union, cross, elbo, nipple, long screw, reducing socket, reducing tee, short piece etc fitted with holder bats clamps, including cutting pipes, making threads, fitting fixing etc. complete in all respect including cost of all necessary fitting as required jointing materials and two coats of [painting with approved paint in any position above ground. (Payment will be made on the center line are measurement of the total pipe line including all specials no separate payment will be made on accessories specials) Payment for painting will be made separately. For Exposed Worki) 15mm dia medium quality |
| 24 | ii) 20mm dia medium quality |
| 25 | Supplying fitting , fixing gunmetal wheel valve of approved brand and make tested to 21.00 kg/sq cmi) 32 mm |
| 26 | i) 25 mm |
| 27 | Renewing 15 mm G.I. spreader. |
| 28 | Supplying fitting , fixing C.P. bib Cock / Stop Cock (i) Chromiumplated Bib Cock short body ( equivalent to Code No-511 & Model - Tropical / Sum thing special of ESSCO or similar brand ) |
| 29 | Supplying fitting , fixing C.P. bib Cock / Stop Cock(ii) Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model- Tropical / Sumthing Special of ESSCO or similar brand) |
| 30 | Supplying fitting , fixing C.P. bib Cock / Stop Cock(ii) Chromium plated Concealed Stop Cock (Equivalent to Code No. 514(A) & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 31 | Supplying fitting, fixing C.I. holder bat clamp including cutting holes in wall etc and mending good all damages in cement concrete with jhama chips (4 : 2 : 1) and cement plaster (6 : 1) to match and curing complete in all respect.ii) 20mm |
| 32 | iii) 25mm |
| 33 | Diamantling and re fixing Bib cock or stop cock.i) 15mm |
| 34 | Renewing brass spindle and valve of stop cock / Bib cock / push cock / pillar cock)i)15 cm |
| 35 | Supplying fitting fixing 10 liter PVC low down cistern conforming to I.S. specification with PVC fitting complete CI brackets including two coats of painting to brackets etc. |
| 36 | Supplying fitting and fixing approved brand PVC connector white flexible with both end coupling with heavy brass C.P. nut 15mm dia.Iv)750 mm long |
| 37 | Supplying fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75mm x 75mm wooden blocks C.P.waste fittings of 32mm dia one approved quality brass C.P. pillar cock of 15mm dia C.P. chain with rubber plug of 30mm dia, approved quality P.V.C waste pipe with C.P. nut 32mm dia 900mm long approved quality PVC connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two costs of approved paints.ii) 550mm x 400mm size |
| 38 | Supplying fitting and fixing Pillar cock of approved make.a) i) C.P. Pillar Cock - 15mm (equivalent to Code No-507 & Model- Tropical / Sumthing special of ESSCO or similar brand. |
| 39 | c) CP Pillar Cock - 15 mm. (Code No. 5011 & Model - FLORENTINE of JAQUAR or equivalent). |
| 40 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(a) For Exposed WorkPVC Pipes(Dia) 40 mm |
| 41 | Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to IS-15778: 2007(A)(I) CPVC Pipes Class-1,SDR-11(dia) 25 mm |
| 42 | (U) Male threaded adopter Brass threaded(dia) 40 mm |
| 43 | (Q) Ball Valve 40 mm |
| 44 | Removing chokage of H.C.L. or S.W. pipe with split bambooa) Under ground |
| 45 | b) Over ground |
| 46 | Supplying fitting and fixing E.W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc.(b) With 'S' trap |
| 47 | Supplying fitting and fixing closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.(a) E.W.C. (i) Plastic ( hallow type ) white. |
| 48 | Supplying fitting and fixing Flat back urinal ( half stall in urinal) in white vitreous china ware of approved make complete in position with brass screws on 75mm x 75mm x 75mm wooden blocks complete. i) 635mm x 395mm x 420mm |
| 49 | Supplying fitting and fixing Squatting plate with integral flushing in white vitreous china ware of approved make complete in cement concrete (6:3:1) with jhama chips complete.(payment of concrete will be paid separately).i) 450mm x 350mm |
| 50 | Supplying, fitting and fixing 32mm dia flush pipe of approved make with necessary fixing materials and clamps complete.i) Polythene flush pipe |
| 51 | Supplying, fitting and fixing shower of approved brand and make. (f) Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar). |
| 52 | CP 2-way bib Cock- 15 mm, supplied, fitted and fixed. (Code No.5041 & Model - FLORENTINE of JAQUAR or similar brand). |
| 53 | Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.(i) 450 mm x 300 mm |
| 54 | Supplying , fitting and fixing towel rail with two brackets.(a) Aluminium(i) 25 mm dia. And 450 mm long |
| 55 | Suppluying fitting and fixing 1st quality ceramic tile in walls and floors to match with the existing work and 4 nos of key stones (10mm) fixed araldite at the back of each tile and finishing the joint with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(C) Floor With Polymerised Ahdhesiv & Epoxy grout painting including spacer- 2 mm ( When Tiles are laid over existing hard ready surface) 0.20kg/Sq.m. (b) Area of each tile above 0.09 Sq.m [using adhesive 4.5 mm thick] (i) Coloured decorative |
| 56 | Providing and fixing of false ceiling with powder coated exposed G.I.grid suspension system (T-Grid having load carrying capacity with mid span deflection not exceeding1/360 span with hanger spacing of 1200 mmc/c) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm /600 mm long and Wall Angle. TheWall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c.The Main Runners to be placed @1200 mm.The Cross Tee1200 mm will be inserted in the pre-cut slot sof Main Runner at regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm.Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit. 6mm thick High Pressure Steam Cured Non Asbestos Fibre Cement Standard Ceiling Board (Density>1300Kg/m3) of size 595 mm X 595 mm, conforming IS1 4862 & Type B Category III of ISO 8336, tested as per AS-1530 part 3 & BS- 476 Part4,5,6,7 & 8, should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of Engineer-in-charge. In ground floor False Ceiling (with 6mm thick Fibre Cement Standard Ceiling Board and E-Grid T-2430). |
| 57 | Providing and fixing in position Vertical Blinds of approved make and brand as per drawing, design and direction of EIC.Mechanism details:Operation: Manual.Head rail: 25mm x 50mm extruded high strength anodized aluminium alloy section with wall thickness 1.2mm, Demountable type. End Control Unit: Shall have planetary reduction gear box Tilter Chain: 4.5mm plastic beads mouded on 2.2mm thick polyester cord with 6mm pitch. Tilt Rod: Extruded aluminium having 3 keyways, average diameter is 5.8mm and shall rotate louvers by 180 degrees. Carrier (Runner): Moulded plastic having anti friction additive. Weight and Chain: Powder coated galvanized steel sheet 1.7mm thick and 100mm wide. Installation bracket: Galvanized steel \\"L\\" bracket of 3mm thickness fitted with pressure clip made of spring stainless steel to hold the head rail. Cord weight: Appx. 110gms and 110mm length made out of ABS material hallow casing with a steel weight inside. Cord: Shall be with nearest matching shade of blind, 2.2mm dia, braided high strength fiber cord and have resistance to abrasion and elongation. Louver (fabric) details: Fabric description: 100% Polyester fabric with scotch guard coating Fabric width: 100mm Fabric weight: 105 +/- gm/smt (+/- 5%) Coating: Acrylic polymer & Derivatives Fabric thickness: 0.5mm (+/- 5%) Fabric shade: As approved by Engineer In-charge. |
| 58 | 48\\" wide window curtain cloth with white cloth lining at the back |
| 59 | Pipe (1 \\" diameter steel/M.S) |
| 60 | Clamp (steel) |
| 61 | Carpenter |
| 62 | Plumbing Mistry |
| 63 | Mazdoor Please Enable Macros to View BoQ information |
