Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | CIVIL PORTION OF THE WORK:- Earthwork in excavation in all types of soil for site leveling, foundation, pits, trenches and other civil works upto and including 1.5 metre depth and stacking the soil upto a lead of 100 metre and including dewatering, removing slush,shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge. |
| 2 | Supplying and filling sand in foundation and over areas including watering, ramming, consolidating and dressing, labours, tools, taxes etc. all complete as per the specification and direction of Engineer-In-charge. |
| 3 | Filling foundation and plinth with excavated earth with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 4 | Providing and lying plain cement concrete of proportion (1:3:6) in foundation and floors using Portland slag cement (PSC) with 40 mm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per the instruction of the Engineer-in-Charge. |
| 5 | C.C. (1:2:4) using 12mm size b.h.g.c.b. chips including watering, curing with cost, conveyance, royalty and taxes of all materials and labour etc. complete. |
| 6 | R.C.C. work of M-20 in following works using 12 mm. to 20 mm. (%\\" to %\\") size (20 mm. not to exceed 25%) hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per the direction of the Engineer in-charge. For Column BaseGround Floor |
| 7 | Column SuperstructureGround Floor |
| 8 | 1st Floor |
| 9 | 2nd Floor |
| 10 | 3rd Floor |
| 11 | Plinth BeamGround Floor |
| 12 | Roof BeamGround Floor |
| 13 | 1st Floor |
| 14 | 2nd Floor |
| 15 | 3rd Floor |
| 16 | Lintel Ground Floor |
| 17 | 1st Floor |
| 18 | 2nd Floor |
| 19 | 3rd Floor |
| 20 | ChajjaGround Floor |
| 21 | 1st Floor |
| 22 | 2nd Floor |
| 23 | 3rd Floor |
| 24 | Roof SlabGround Floor |
| 25 | 1st Floor |
| 26 | 2nd Floor |
| 27 | 3rd Floor |
| 28 | Stair Case 2nd Floor |
| 29 | Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.Ground Floor |
| 30 | 1st Floor |
| 31 | 2nd Floor |
| 32 | 3rd Floor |
| 33 | Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties and taxes of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge. 3rd Floor |
| 34 | Fly ash brick masonry in cement mortar (1:6) using 23 Cm. x 11 Cm. x 8 Cm. size fly ash bricks having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % in foundation and plinth including cost, conveyance, royalty, loading, unloading of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge. Foundation and Plinth |
| 35 | Fly ash brick masonry in cement mortar (1:6) using 23 Cm. x 11 Cm. x 8 Cm. size fly ash bricks having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % in Superstructure including cost, conveyance, royalty, loading, unloading of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.Ground Floor |
| 36 | 1st Floor |
| 37 | 2nd Floor |
| 38 | 3rd Floor |
| 39 | Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ev r necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. Ground Floor |
| 40 | 1st Floor |
| 41 | 2nd Floor |
| 42 | 3rd Floor |
| 43 | Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joint, including watering and curing, rounding of cormers, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.Ground Floor |
| 44 | 1st Floor |
| 45 | 2nd Floor |
| 46 | 3rd Floor |
| 47 | Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats coat of redoxide primer as per approved drawing and design with cost of all materials & labour, taxes, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge. All Floor |
| 48 | Supplying Fitting, fixing Two Track UPVC Sliding framed window of approved make with 6mm thick glass of approved quality complete with frame shutters and all fitting and fixturesGround Floor |
| 49 | 1st Floor |
| 50 | 2nd Floor |
| 51 | 3rd Floor |
| 52 | Supplying, fitting & fixing of Kota Tiles of minimum 16mm thick and above 0.10 sqm of approved make in floors over 25mm thick bed of cement mortar 1:1 jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect.(Data for 10 Sqm )Ground Floor |
| 53 | 1st Floor |
| 54 | 2nd Floor |
| 55 | Supplying, fitting & fixing of Kota Tiles of minimum 16mm thick and above 0.10 sqm of approved make in dadoes, skirting and risers of nsteps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge Ground Floor |
| 56 | 1st Floor |
| 57 | 2nd Floor |
| 58 | Wall Painting two coats with approved Plastic Emulsion Paint over a coat of Water Bound Wall cement Primer on Plastered Surface including cost of all materials and labour (T&P) etc. complete as per the direction of Engineer-in-Charge.Ground Floor |
| 59 | 1st Floor |
| 60 | 2nd Floor |
| 61 | 3rd Floor |
| 62 | Painting two coats with any approved colour of weather seal coat over a coat of Water Bound Wall cement Primer to out side surface of wall with any approved shade including cost of all materials and labour (T&P) etc. complete as per the direction of Engineer-in-Charge.Ground Floor |
| 63 | 1st Floor |
| 64 | 2nd Floor |
| 65 | 3rd Floor |
| 66 | Painting two coats with approved Enamel Paint on Steel surface over a coat of Red Oxide Primer with any approved shade including cost of all materials and labour (T&P) etc. complete as per the direction of Engineer-in-Charge.Ground Floor |
| 67 | 1st Floor |
| 68 | 2nd Floor |
| 69 | 3rd Floor |
| 70 | Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete as per the direction of Engineer-in-Charge. |
| 71 | Dismantling and removing R.C.C. columns, beams, slab, staircase, landing and lintels including stacking the useful materials for reuse and removing the debris within 50m lead. 1st Floor and 2nd Floor |
| 72 | Dismantling brick or stone masonry in lime or cement mortar including stacking the useful materials for reuse and removing the debris within 50m lead. |
| 73 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20mm dia C-PVC pipe second floor |
| 74 | 25mm dia PVC pipesecond floor |
| 75 | 32mm dia C-PVC pipe |
| 76 | 40mm dia C-PVC pipe |
| 77 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.15mm dia CP angle stop cock (Jaquar)CON-CHR-059KN |
| 78 | 15mm dia CP two way bib cock (Jaquar)CON-041KN |
| 79 | 15mm dia CP short body bib cock (Jaquar)CON-CHR-047KN |
| 80 | 15mm dia CP long body bib cock (Jaquar Make)CON-107KN |
| 81 | 20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make) |
| 82 | 25mm dia brass full way valve (Shakti make) |
| 83 | 32mm dia brass full way valve (Shakti make) |
| 84 | 25mm dia CP Health Faucet (Jaquar Make)ALD - CHR - 565 |
| 85 | 15mm CP Extension piece |
| 86 | 125mm CP grating |
| 87 | 15mm size C.P. flange |
| 88 | Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 2000 liters capacity PVC water storage tank roof of 2nd floor |
| 89 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.second floor |
| 90 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-chargesecond floor |
| 91 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.second floor |
| 92 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 93 | 110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 94 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 95 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 96 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 97 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 98 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 99 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 100 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 101 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.580mm size Orissa pan (Hindware/Parryware/Neycer make) |
| 102 | Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal |
| 103 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 104 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-chargeEuropean water closet with 'p' trap plain(Hindware/Parryware/Neycer make) |
| 105 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-chargeUnder Counter basin(560x450)Hindware-No.10095 |
| 106 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeTowel ring |
| 107 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.600mmx125mm plate glass shelf |
| 108 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.600mmx450mm size B.E mirror |
| 109 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeCP soap holder |
| 110 | Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 111 | Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 112 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-chargeInside size 76cmx76cmx46cm with 18” dia RCC MH cover |
| 113 | Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge |
| 114 | Supplying all materials, labour, T&P and providing and fixing vitrified tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed series to be pre-approved by the Engineer-in-charge )Kajaria/Somany/Johnson tile 60cmx60cm second floor |
| 115 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.second floor |
| 116 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge )Kajaria/Somany/Johnson tile 60cmx30cm second floor |
| 117 | Providing fitting, fixing of Aluminium door with anodized AL. door section of 9202 as vertical member,9201 as top and 9200 as middle bottom member with frame section No. 9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle No. 1855 Including all Cost of Labour. T&P hire charges of drilling machine. labour charges etc. complete. Ref : OBI10 |
| 118 | Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 120 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 120 liter's along with 3 noa of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in chargeAqua guard pure Chill 120 PSS UV |
| 119 | Ext. S/D PortionSupplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge100mm dia P.V.C. pipe |
| 120 | 150mm dia P.V.C. pipe |
| 121 | Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover ) |
| 122 | Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 123 | 1 no 30 users RCC septic tankEarth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge. |
| 124 | Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general. |
| 125 | Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge. |
| 126 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 127 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 128 | Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 129 | Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 130 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeR.C.C beams,columns,girder and bressmer etc. |
| 131 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 132 | Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 133 | Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge. |
| 134 | Supplying all materials, labour T&P for providing fitting & fixing 150mm x 150mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge. |
| 135 | Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site. |
| 136 | Construction of 1 Nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessoriesLabour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore onlyDrilling of 200mm dia bore00 mtr to 30mtr |
| 137 | 30 mtr to 45mtr |
| 138 | Drilling of 150mm dia bore45 mtr to 185.00mtr |
| 139 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.Lowering of 200mm dia P.V.C casing pipes00 mtr to 30 mtrs |
| 140 | 30 mtr to 60mtr |
| 141 | Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.200mm dia PVC (sch-80) pipe |
| 142 | Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department) |
| 143 | By DTH Rig |
| 144 | Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation:Rocky terrain with boulder formation for 300m depth |
| 145 | Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) 1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm |
| 146 | DOL Control panel |
| 147 | 40mm dia steel short piece |
| 148 | Well cap |
| 149 | 50mm size CI bracket |
| 150 | 2.50sqmm flat cable |
| 151 | 20mm dia rigid UPVC pipes |
| 152 | Steel rope with cover |
| 153 | Labour charges for lowering including transportation |
| 154 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge32mm HDPE pipes (Finolex/Supreme make) |
| 155 | Recessed wiring to Light/ Fan/ Call bell and Exhaust fan point with 1.5 mm2 FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non metalic PVC flexible conduit with 5/6A 250 volt Modular type switch,ceilling rose mounted on MS box having front bakelite cover of suitable size M.S box with 1.5mm2 FRLSH pvc insulated Single Core multistrand copper conductor as earth wire Including all accessories and connection as per direction of Engineer-in-charge. (Make of wire:- Finolex/Anchor/ Havells/ Polycab/KEI/ V.Guard & Make of Switch/Socket:-legrand (Myrius-Next gen)/Schneider(Zencelo)/ Panasonic (vision)/ Havells (Crabtree)a) Group-A |
| 156 | b) Group-B |
| 157 | c) Group-C |
| 158 | Recessed wiring to 5/6A socket outlet with 2x1.5mm2 PVC Insulated S.C FRLSH multistrand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit pipe with Modular type switch.a) Group-A (On Extension) |
| 159 | b) On existing board |
| 160 | Recessed wiring to power plug point with 2x4mm2 PVC Insulated S.C FRLSH multistrand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit along with 1x2.5mm2 FRLSH PVC insulated S.C Cu. wire for loop earthing as required.(Make of wire:-Finolex/ Anchor/Havells/ Polycab/KEI/ V.Guard ) |
| 161 | Wiring to Circuit/ Sub-main along with earth wire with following size of FRLSH PVC S.C.Cu. Wire (Make of wire:- Finolex/ Anchor/ Havells/Polycab/ V.Guard/KEI)a) 1 x 1.5mm2 Submain for Invertor wiring |
| 162 | b) (1.8.1) 2X1.5mm2 + 1x1.5mm2 |
| 163 | c) (1.8.2) 2X2.5mm2 + 1x1.5mm2 |
| 164 | d) (1.8.3) 2X4mm2 + 1x1.5mm2 |
| 165 | e) (1.8.4) 2X6mm2 + 1x2.5mm2 |
| 166 | f) 2X10mm2 + 1x4mm2 |
| 167 | f) (1.8.5) 2X10mm2 + 1x4mm2 |
| 168 | S/F of Computer Board consisting of 1x16Amp + 2x6Amp modular Switch with 5 Pin modular Sockets including all accessories and recessed wiring,cutting of wall and connection as per requirement. |
| 169 | S/F of step type electronic modular fan regulator of Havells/Legrand/Schnider/Hager make . |
| 170 | S/F of 1200mm Energy Efficient High Speed Ac Ceilling Fan of make & model:- Usha Racer Chrome/Bajaj Edge HS Deco Plus/Crompton Diego/Havells Ambrose ES/Equivalent without Regulator as per direction of engineer in charge. |
| 171 | S/F of 22 watt LED Tube Light fitting of Philips/Bajaj/Havells/HPL make. |
| 172 | S/F of Modular Angle Holder of any ISI make. |
| 173 | S/F of 9watt LED Bulb of Havells/Bajaj/Philips/ HPL make. |
| 174 | S/F of 18watt Surface mounted LED down light complete of Havells/ Bajaj/Philips/any equivalent ISI make. |
| 175 | S/F of 12 way double door Distribution Box with 1x40 Amp DP MCB of C'series + 2x10Amp SP MCB of B' Series + 8x6Amp SP MCB ofB'series as per direction of engineer in-charge. (DB & MCB of make:- Schnider/ Hager/Legrand/L&T/Havells) |
| 176 | S/F of Special Earthing complete with provision of600x600x3.15mm thick copper plate along with25x5mm copper strip in 40mm dia GI pipeincluding soldering of strip if necessary andproviding masonary enclosure with cover plate having locking arrangement and watering pipe etc.with charcoal and salt as required. |
| 177 | S/F of Lightening Arrestor with 85mm dia 3mm thick Copper base plate and Copper flat of 20mmwidthx3mm thick including all accessories. |
| 178 | S/L of SWG No.6 Copper Earthing wire of any ISI make for running of Earth continuity of Lightening Arrestor & Main Panel Board from Earth pits.(N.B:-Earthing Wire of Lightening Arrestor should separately run without touching Panel Earth line & Building body/Wall) |
| 179 | S/F 3&1/2 core x 50 mm2 PVC Alluminium Armoured Cable of ISI Marked (Polycab/KEI/ Havells make). |
| 180 | Laying of cable on wall surface by clamping. |
| 181 | Fabrication of 63Amp panel board of size 990mm x 1050mm x 330mm with powder coat made out of 18 SWG CR sheet with Incoming side:- 63Amp 16 KA 4-Pole MCCB-1 No, 63Amp four pole Onload Change Over Switch-1 No,100Amp 25mm x 6mm size TPN Copper Busbar -1 Set,Outgoing:-40Amp DP MCB-6 Nos,32 Amp DP MCB-6 Nos,,Digital Voltmeter-1 No, Digital Ammeter-1 No,CTCoils,RYB Indicators, Transportation and fixing charges etc.Protective device (MCCB,Change over Switch & MCB should be make of L&T/Hager/ Schnider/Legrand/Havells) (Main Incomer Panel Board) |
| 182 | S/F of 90wt LED Street light of Havells/HPL/Bajajmake. |
| 183 | Supply and Fixing of GI bend pipe for street light including all accessories i.e clamp or jam lock etc. |
| 184 | First Floor:-Recessed wiring to Light/ Fan/ Call bell and Exhaust fan point with 1.5 mm2 FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non metalic PVC flexible conduit with 5/6A 250 volt Modular type switch,ceilling rose mounted on MS box having front bakelite cover of suitable size M.S box with 1.5mm2 FRLSH pvc insulated Single Core multistrand copper conductor as earth wire Including all accessories and connection as per direction of Engineer-in-charge. (Make of wire:- Finolex/Anchor/ Havells/ Polycab/KEI/ V.Guard & Make of Switch/Socket:-legrand (Myrius-Next gen)/Schneider(Zencelo)/ Panasonic (vision)/ Havells (Crabtree)a) Group-A |
| 185 | b) Group-B |
| 186 | c) Group-C |
| 187 | Recessed wiring to 5/6A socket outlet with 2x1.5mm2 PVC Insulated S.C FRLSH multistrand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit pipe with Modular type switch.a) Group-A (On Extension) |
| 188 | b) On existing board |
| 189 | Recessed wiring to power plug point with 2x4mm2 PVC Insulated S.C FRLSH multistrand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit along with 1x2.5mm2 FRLSH PVC insulated S.C Cu. wire for loop earthing as required.(Make of wire:-Finolex/ Anchor/Havells/ Polycab/KEI/ V.Guard ) |
| 190 | Wiring to Circuit/ Sub-main along with earth wire with following size of FRLSH PVC S.C.Cu. Wire (Make of wire:- Finolex/ Anchor/ Havells/Polycab/ V.Guard/KEI)a) 1 x 1.5mm2 Submain for Invertor wiring |
| 191 | b) (1.8.1) 2X1.5mm2 + 1x1.5mm2 |
| 192 | c) (1.8.2) 2X2.5mm2 + 1x1.5mm2 |
| 193 | d) (1.8.3) 2X4mm2 + 1x1.5mm2 |
| 194 | e) (1.8.4) 2X6mm2 + 1x2.5mm2 |
| 195 | f) (1.8.5) 2X10mm2 + 1x4mm2 |
| 196 | S/F of Computer Board consisting of 1x16Amp + 2x6Amp modular Switch with 5 Pin modular Sockets including all accessories and recessed wiring,cutting of wall and connection as per requirement. |
| 197 | S/F of step type electronic modular fan regulator of Havells/Legrand/Schnider/Hager make . |
| 198 | S/F of 1200mm Energy Efficient High Speed Ac ceilling Fan of make & model:- Usha Racer Chrome/Bajaj Edge HS Deco Plus/Crompton Diego/Havells Ambrose ES/Equivalent without Regulator as per direction of Engineer in charge. |
| 199 | S/F of 22 watt LED Tube Light fitting of Philips/Bajaj/Havells/HPL make. |
| 200 | S/F of Modular Angle Holder of any ISI make. |
| 201 | S/F of 9watt LED Bulb of Havells/Bajaj/Philips/ HPL make. |
| 202 | S/F of 18watt Surface mounted LED down light complete of Havells/ Bajaj/Philips/any equivalent ISI make. |
| 203 | S/F of 12 way double door Distribution Box with 1x40 Amp DP MCB of C'series + 2x10Amp SP MCB of B' Series + 8x6Amp SP MCB ofB'series as per direction of engineer in-charge. (DB & MCB of make:- Schnider/ Hager/Legrand/L&T/Havells) |
| 204 | S/F of 32Amp DP Switch of any ISI make. |
| 205 | 2nd Floor:-Recessed wiring to Light/ Fan/ Call bell and Exhaust fan point with 1.5 mm2 FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non metalic PVC flexible conduit with 5/6A 250 volt Modular type switch,ceilling rose mounted on MS box having front bakelite cover of suitable size M.S box with 1.5mm2 FRLSH pvc insulated Single Core multistrand copper conductor as earth wire Including all accessories and connection as per direction of Engineer-in-charge. (Make of wire:- Finolex/Anchor/ Havells/ Polycab/KEI/ V.Guard & Make of Switch/Socket:-legrand (Myrius-Next gen)/Schneider(Zencelo)/ Panasonic (vision)/ Havells (Crabtree).a) Group-A |
| 206 | b) Group-B |
| 207 | c) Group-C |
| 208 | Recessed wiring to 5/6A socket outlet with 2x1.5mm2 PVC Insulated S.C FRLSH multistrand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit pipe with Modular type switch.a) Group-A (On Extension) |
| 209 | b) On existing board |
| 210 | Recessed wiring to power plug point with 2x4mm2 PVC Insulated S.C FRLSH multistrand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit along with 1x2.5mm2 FRLSH PVC insulated S.C Cu. wire for loop earthing as required.(Make of wire:-Finolex/ Anchor/Havells/ Polycab/KEI/ V.Guard ) |
| 211 | Wiring to Circuit/ Sub-main along with earth wire with following size of FRLSH PVC S.C.Cu. Wire (Make of wire:- Finolex/ Anchor/ Havells/Polycab/ V.Guard/KEI)a) 1 x 1.5mm2 Submain for Invertor wiring |
| 212 | b) (1.8.1) 2X1.5mm2 + 1x1.5mm2 |
| 213 | c) (1.8.2) 2X2.5mm2 + 1x1.5mm2 |
| 214 | d) (1.8.3) 2X4mm2 + 1x1.5mm2 |
| 215 | e) (1.8.4) 2X6mm2 + 1x2.5mm2 |
| 216 | f) (1.8.5) 2X10mm2 + 1x4mm2 |
| 217 | S/F of Computer Board consisting of 1x16Amp + 2x6Amp modular Switch with 5 Pin modular Sockets including all accessories and recessed wiring,cutting of wall and connection as per requirement. |
| 218 | S/F of step type electronic modular fan regulator of Havells/Legrand/Schnider/Hager make . |
| 219 | S/F of 1200mm Energy Efficient High Speed Ac ceilling Fan of make & model:- Usha Racer Chrome/Bajaj Edge HS Deco Plus/Crompton Diego/Havells Ambrose ES/Equivalent without Regulator as per direction of Engineer in charge. |
| 220 | S/F of 22 watt LED Tube Light fitting of Philips/Bajaj/Havells/HPL make. |
| 221 | S/F of Modular Angle Holder of any ISI make. |
| 222 | S/F of 9watt LED Bulb of Havells/Bajaj/Philips/ HPL make. |
| 223 | S/F of 18watt Surface mounted LED down light complete of Havells/ Bajaj/Philips/any equivalent ISI make. |
| 224 | S/F of 12 way double door Distribution Box with 1x40 Amp DP MCB of C'series + 2x10Amp SP MCB of B' Series + 8x6Amp SP MCB ofB'series as per direction of engineer in-charge. (DB & MCB of make:- Schnider/ Hager/Legrand/L&T/Havells) |
| 225 | External Power Supply:-Installation of 100 KVA 11/0.4 KV Step down Transformer with required Sub-Station,approaching HT & LT Line,Extension of LT Line towards new building for Additional Class Rooms with 4 Wire 95 Sqmm AB Cable (i.e. 3x95 sqmm for Phase + 1x70 Sqmm for Neutral) of 300 Mtr length along with all required accessories, Deposit of required Inspection Fees,Deposit of required Supervision Charges i.e. Net Amount in favour of TPWODL with reference to their Estimate and Complete Line Charging of the Building.(During execution of external power supply works the estimate of TPWODL & their standard guidelines will be followed) , Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
