Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | CIVIL WORKProviding labour, tools & plants (T&P), and sundries for dismantling of existing selfie point, including removal of lettering/signage, dismantling of flooring, PCC, and sand filling; complete with backfilling, site dressing, and disposal of dismantled materials within a lead of 10 km, all complete as per direction of Engineer-in-Charge (EIC).(a) Ground Floor |
| 2 | Dismantling and removing R.C.C. columns beams slab staircase landing lintels including stacking the useful materials for reuse and removing the debris within 50m lead |
| 3 | Dismantling brick or stone masonry in lime or cement mortar under 3m. height including stacking the useful materials for reuse and removing the debris within 50mtr lead. |
| 4 | Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead |
| 5 | Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep stacking the useful materials for reuse and removing the debris within 50m lead |
| 6 | Excavation of founation in hard rock (granite) removed by chiselling including dressing and levelling the bed not exceeding 1.5m in depth and depositing the soil within initial lead of 50m and as per specification approved by the Department. (a) Upto 1.5 Mtr Depth |
| 7 | (b) From 1.5m to 3.00m depth |
| 8 | Earth work in excavation in foundation trenches, column foundation, pit, etc in all kind of soil including moorum stony earth and gravel mixed with boulders except sheet rock and boulders not requiring blasting including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site with initial lead of 50 mtr and all lifts, including shoring, shuttering & dewatering (if required) with cost of labour, labour cess, hire & running charges of all machineries, sundries & T&P required for the work complete as directed by the Engineer in charge.(a)Upto 1.5mtr Depth |
| 9 | Filling the Foundation and Plinth, sides of foundation, etc. with excavated materials (excluding rock), in layers not exceeding 0.225 m in depth including cost of watering, ramming, dressing and levelling the top to proper level & gradient, cost of labour, conveyance, taxes, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge. |
| 10 | Disposal of surplus earth/debris staked at work site by mechanical means including loading and unloading and disposing the same within a lead of 5 km with hire running charges of all machineries, cost of all labour, labour cess, T&P required for the work etc. complete as directed by Engineer-In-Charge. |
| 11 | Supplying and filling with sand in foundation and plinth in layers not exceeding 20 cm in depth, well watered and compacted , top surface dressed and levelled to proper level and gradient including cost of all materials, conveyance, taxes, royalties, loading, unloading, cost of all labour, T&P, etc. all complete as per the direction of Engineer-in-Charge. |
| 12 | Providing and lying Plain Cement Concrete of proportion (1:3:6) in foundation & floor using 40 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, taxes, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge. Ground Floor |
| 13 | (a)From 1.5mtr to 4.5Mtr Depth |
| 14 | Providing, lifting, hoisting and laying in position machine batched , machine mixed and machine vibrated design mix cement concrete of M-25 Including the cost of Centering and Shuttering (minimum cement content not less than 403 Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance,loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement. |
| 15 | (A)R.C.C. foundation and footing bases of columns mass concrete pre-cast slab etc.: Beyond 1.5 M to 4.5M Depth |
| 16 | (a)From 1.5mtr to 4.5Mtr Depth |
| 17 | (B)R.C.C. Plinth Beam Ground Floor |
| 18 | (C)R.C.C. Beams, columns, grider and bressmer etc. Ground Floor |
| 19 | (a)R.C.C. walls |
| 20 | (D)R.C.C. Floor and Roof slab, landing, balconies,Projecting sun shades and chajjas up to 4.3Mtr. Height. |
| 21 | (E)R.C.C. Lintel |
| 22 | Providing & fixing TOR Fe-500 HYSD Reinforcement bars (SAIL /TATA /RINL) of required diameter and approved quality for Reinforced Cement Concrete work including straightening, cutting, bending, binding, welding(if approved) , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings (BBS) with provision of standard fan hooks including the cost of all materials, cost of all labour, conveyance, taxes, loading, unloading, cost of binding wires of 18 to 20 gauge, T&P, etc, all complete as per the direction of Engineer-in-Charge.Note: (Linear measurements will be taken & quantity will be calculated on standard weight. Lap length of bars & Weight of binding wire will not be considered for measurement and payment.) Ground Floor |
| 23 | Supplying, diluting and preparing chemical emulsion like Imidacloprid 30.5 % SC or other chemicals approved by Central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as Pre-Constructional Anti-termite Treatment confirming to IS 6313 (Part-II) and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc. at the rate of 7.5 liters per sqm on vertical surface and 5.0 liters per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center to center (or as directed by the manufacturer) including the cost of all materials, cost of all labour, conveyance, loading, unloading, T&P, etc. all complete as per the direction of Engineer-in-Charge.( The payment shall be made on the basis of actual plinth area of the building at ground floor and vertical faces will not be measured for payment). Note- The contractor shall have to furnish Ten (10) years guarantees to maintain the anti-termite treated area / structure free from termite. In addition to the 10 years guarantee furnished as above, the contractor shall have to furnish ten years (after certificate of final completion) Bank Guarantee Bond issued by any Nationalized Bank executed in favour of the client as directed in the prescribed proforma available in the tender document for an amount of 10% (ten percent) of cost of this item of work. |
| 24 | Providing and laying Brick Masonry work in Foundation & Plinth using Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:6) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge. |
| 25 | Providing and laying of Full Brick Masonry work in Superstructure using Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:6) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge.Ground floor |
| 26 | Coursed rubble hard Granite stone masonry (first class) in cement mortar (1.4) in superstructure. |
| 27 | Providing 16mm thick cement plaster in cement mortar (1:6) to the surfaces of brick masonry wall including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats, bars, etc only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, royalties, cost of labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-chargeGround floor |
| 28 | Providing 12mm thick cement plaster in cement mortar (1:6) to the surface of brick masonry wall including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats, bars, etc only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, taxes, royalties, cost of labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge.Ground Floor |
| 29 | Providing 6 mm thick Cement Plaster in Cement Mortar of (1:4) to Ceilings of Roof Slabs, Stairs, Landings, Chajja, Shelves, Columns, Beams and Lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading and royalties, all labour, scaffolding, watering and curing , sundries, T&P etc. complete as per direction of the Engineer-in-chargeGround floor |
| 30 | Providing & laying granite stone tiles in dado/skirting using 10mm thick granite stone slab of approved quality, colour and size upto 0.4 Sqm as per IS 14223 to proper line, level and slope laid over 12mm thick cement mortar (1: 3) confirming to IS IS-1443 including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with acid including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.(Note- Sample of granite tiles shall be approved before procurement and use.) Ground floor |
| 31 | Providing average 25mm thick grading Concrete in C.C ( 1:2:2 ) using 6mm size crusher broken black hard granite chips using 2% water proofing cement compound (Make: Sika / Fosroc / Equivalent) after scraping and cleaning the roof surface and finishing smooth to proper slope and gradient including cost of all materials, conveyance, sundries,T&P watering and curing by ponding water over terrace slab etc. complete as per the direction of the Engineer-in-charge.Ground floor |
| 32 | Supplying and finishing the plastered surface of wall using Cement Based Wall Putty (Water Based) of approved make and quality and finished smooth and even surface to receive the paint including the cost of all materials, cost of all labour, conveyance, taxes, loading, unloading, scaffolding, T&P, etc, all complete as per the direction of Engineer-in-Charge.(Make: Birla White/J K Wall Putty)Interior+Exterior |
| 33 | First floor-Internal putty |
| 34 | First floor-External putty |
| 35 | Providing and Painting with Two Coats Weather Coat Paint (exterior grade) of approved make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULUX or equivalent to make an even finished surface over a coat of water bound cement primer and wall putty in all heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete.Ground Floor |
| 36 | First floor |
| 37 | Supplying, fitting & fixing of M.S. grill made out of M.S. flats/square bars including wheel track, gear, bearing etc. as per drawing and design fixed in position to proper plumb, including a coat of priming with approved quality metallic primer, materials including cost, conveyance, taxes, transportation of all materials, cost of all labour, sundries, T&P etc. complete as per direction of Engineer in charge. Ground Floor |
| 38 | Providing and Painting two coats with synthetic enamel paint of approved make, quality and shade on new Steel work to give an even shade over an under coat of primer of approved brand and manufacturer including the cost of all materials, cost of all labour, conveyance, taxes, loading, unloading, scaffolding, staging, T&P, etc, all complete as per the direction of Engineer-in-charge.(Note- colour and shade shall be approved before procurement and use.)Ground Floor |
| 39 | Providing and applying 2 coats plastic emulsion paint of approved quality and shade over a coat of wall primer of approved quality to surfaces (interior) including throughly brushing the surface free from foreign materials, sand papering smooth the intermediate coats, providing necessary putty & primer including of all materials, labour, conveyance,royalties, scaffolding, watering, curing, sundries, tools and plants etc as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use) (Make:Dulux/Nerolac/Berger/Asian Paint). Gound floor |
| 40 | First Floor |
| 41 | FLOORING WORKProviding and laying of 600 mm x 600 mm Vitrified Floor Tiles confirming to IS : 15622 of approved make, quality and colour without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.(Note- Sample of tiles shall be approved before procurement and use.) (Make:Somany/Jhonson/RAK/Kajaria).Ground floor |
| 42 | Providing and laying of Vitrified Tiles in dado/skirting confirming to IS : 15622 of approved make, quality, colour and size 600mm x 600mm upto required height from floor level fixed over an under layer of 12mm thick bed of cement mortar (1:3) (1 Cement : 3 Coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.(Note- Sample of tiles shall be approved before procurement and use.). Ground floor |
| 43 | Providing & laying granite stone flooring using 19-20 mm thick granite stone slab of approved quality, colour and size above 0.4 Sqm as per IS 14223 in Stair Treads and Risers over an under layer of 20 mm thick cement mortar (1:4) (1 cement: 4 coarse sand) confirming to IS-1443 including cutting to size, laying and joining with white cement slurry and colouring pigment to match the shade with typical half nosing and cutting grooves etc including cost of all labour, materials, royalties, loading and unloading, conveyance, sundries, watering and curing, etc. complete as per the direction of the Engineer-in-Charge. (Colour: Tan Brown)(Note- Sample of granite tiles shall be approved before procurement and use.) |
| 44 | Providing & laying granite stone flooring in Floors and landing using 19-20 mm thick granite stone slab of approved quality, colour and size above 0.4 Sqm as per IS 14223 laid over an under layer of 20 mm thick cement mortar (1:4) (1 cement: 4 coarse sand) confirming to IS-1443 including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.(Colour: Tan Brown)(Note- Sample of granite tiles shall be approved before procurement and use.) |
| 45 | Providing and fixing 65mm X 125mm factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge.(Make: WPC Door Frame: Century/Black Cobra/Rajshri Plastiwood,Colour:Coffee Brown).Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 46 | Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete.Ground floor |
| 47 | Supplying and installing Aluminium System - Fixed windows made out of ALUPURE/Equivalent make frame dimension of 39mm x 42mm for with corners mechanical joints. Alupure Aluminium Systems are extruded through Nalco Billets with 6063 T6 Grade. With complete wind load calculation as per IS:875(part-3).Almost unlimited choice of colours deu to finishing techniques such as anodising and powder finishing. The system can accomodate glass with 4/5/6/8/10/12/14/20 & 22mm. The profile manufacturer should have an authorised fabrication partner for windows assembling and installation. The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets,bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of MCCOY /Dowcorning or equivalent. orSupplying and installing Aluminium System - Openable windows made out of ALUPURE/Equivalent make frame dimension of 39mm x 62.9mm & Sash dimension of 46mm x 92mm for with corners mechanical joints. Alupure Aluminium Systems are extruded through Nalco Billets with 6063 T6 Grade. With complete wind load calculation as per IS:875(part-3). Almost unlimited choice of colours deu to finishing techniques such as anodising and powder finishing. The system can accomodate glass with 4/5/6/8/10/12/14/20 & 22mm. The profile manufacturer should have an authorised fabrication partner for windows assembling and installation. The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets,bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent. orSupplying and installing Aluminium System - Sliding windows made out of ALUPURE/Equivalent make frame dimension of 88mm x 40 & Sash dimension of 31mm x 61.5mm for with corners mechanical joints. Alupure Aluminium Systems are extruded through Nalco Billets with 6063 T6 Grade. With complete wind load calculation as per IS:875(part-3). Almost unlimited choice of colours deu to finishing techniques such as anodising and powder finishing. The system can accomodate glass with 4/5/6/8/10/12/14/20 & 22mm. The profile manufacturer should have an authorised fabrication partner for windows assembling and installation. The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets,bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent. orGround floor |
| 48 | Providing and installing two component acrylic modified cementitious waterproofing coating over roof slab/Toilet after carrying out pond test on roof slab/Toilet, filling all defects, saturating the surface, mixing the products and then application in 2.0 mm thickness (1.8 Kg / sqm coverage rate for 1.0 mm thickness) in suitable layers complete in all respect, all materials, tools, plant & labour complete in all respect. Density 1850kg/m³ , Mix ratio (Powder to liquid) 3:1 by weight ,Water penetration Din 1048 1.5 Bar no leakage Potlife @ 25°C 2 hours & @ 40°C 30 minutes,Recoatable: 8-12 hours Elongation >42% (air) & >31% (under water),Tensile strength >20 kg/cm2 ,VOC content (HK prod code P10-17) 0.5 g/L including cost of all materials, conveyance, taxes and sundries,T&P, watering and curing by ponding water over terrace slab etc. complete as per the direction of the Engineer-in-charge.(Make:MYK / Fosroc /Tremco Pvt.Ltd./Pidilite /Sika/Sunanda ).Ground floor |
| 49 | Making plinth protection 100mm thick of cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).Ground floor |
| 50 | Providing and fixing Glass Reinforced Concrete (G.R.C) Screens in approved size, pattern, design, shadeand thickness of 50mm on frame and design element in 30mm thick have weight approximately between 3.5 – 4 Kg per Sq. Ft. and color of M/S UniStone make or equivalent. The above weight and thickness is considering dimensions of screens up to 2133mm in height and 1219mm in width and having at least 50% void space. The screens should be made from ‘53 grade’ White Portland Cement manufactured by ‘JK Cement’ or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by ‘N.E.G JAPAN’ or equivalent, Super Plasticizers manufactured by ‘BASF’ or equivalent, Polymers manufactured by ‘BASF’ or equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation manufactured by ‘BAYFERROX (Germany)’ or equivalent. The material casting should take place in FRP Molds. The fixing of Screens should be ‘Dry fixing’ i.e. to be done with M.S Galvanized Clamps, fixtures and fasteners of Hilti / Fischer.Ground floor |
| 51 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.( Ground floor and First floor). |
| 52 | Supply and installation of Gabion units of 1/0.5 m height made of mechanically woven, double twisted, hexagonal shaped steel wire mesh as per IS 16014:2018, MORTH clause 2500 of required sizes, Mesh type 10x12, Mesh wire dia 2.7/3.7mm(ID/OD), (Zn+ Polymer coated),having tensile strength 40kN/m & punch strength 19kN, mechanically edged/selvedged ,with partition at 1 m interval and shall have minimum 10 numbers of mesh openings per meter of mesh perpendicular to twist,tying with lacing wire of diameter 2.2/3.2 mm (ID/OD), placing at indicated places in dry condition at easily accessible location as per direction of Engineer including tools, plant, labour etc. complete in all respect, carrying the material from nearest approach with all leads & lifts, manpower & machinery, materials, labor etc. complete as per detailed technical specifications and as directed by Engineer-In-Charge. |
| 53 | Supply and Filling the Gabion facia unit boxes with dry rubble as per the standard installation guidelines. Rock/rubble for the Gabion filling shall be hard, angular to round, durable and of such quality that they shall not disintegrate on exposure to water or weathering during the life of the structure. The rocks shall range between 150 mm to 250 mm for 10x12 type mesh, including lacing/bracing of gabion boxes and placed in position as per drawaing and to the satisfaction of engineer in Charge (Includes the cost of stones/labour etc. complete). The quality of placing and filling of gabions shall be as per approved construction manual. |
| 54 | GRATINGSupplying, fabricating & fixing of polished stainless steel (304 grade) items made out of pipes, angles, flats, plates, hollow tube, square pipe bracing as per approved design and specification, buffing, polishing etc. with cost, conveyance, labour in railing, parapet, staircase, space frame etc required for the work complete in all respect as per direction of Engineer-in-charge. |
| 55 | ELECTRICALHighmast lightingSupply,installation,testing & commsioing of 16M high mast shaft in two section suitable for 55 m/sec wind speed along with head frame, luminaires carriage suitable for 08 luminaires in symmetrical arrangement and other accessories manufactured in factory.Make -Bajaj /Valmont/TransrailSupply,installation,testing & commsioing of raising lowering system comprising double drum winch, 5mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightning finial including wire (1.5Sqmm) from JB to individual luminaire & MCB in base compartment. Supply,installation,testing & commsioing of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template with M25 grade rcc..Supply,installation,testing & commsioing of LED floodlight type BJFL 200 W 8NOS LED Make-LT/Philips/Bajaj.Supply,installation,testing & commsioing of LED type single dome aviation obstruction light.Supply,installation,testing & commsioing of outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 35 sq. mm and out going 16 & 2.5 sq. mm terminals. |
| 56 | Post Top Lamp for service road AreaSupply , Installation, Testing and commissioning of 5meter Florus Lighting Pole long aesthetically Trishul Design designed Double Arm decorative lighting pole supplied with Pelican fort Mini-3000K-Type II-Polycarbonate Optical Lens 50W LED decorative light having 80Lm/W Lumen output and made up of Spun Aluminium body & Milky acrylic (A9) diffuser KP-12016 Bishop Lighting Pole 5m Bishop Lighting Pole Lighting Pole Height (in mm): 4000mm Pole Size: Ø76.1 PoleType: Pole shall be made up of Mild Steel Body and coated with zinc rich primer & pure polyester powder coating of Black Finish. Base Plate size of Ø230x12mm thick with provision for founation bolt. Pole is Compatible for Ø70mm size for cable entry & exist. Junction Box service door is made up cast aluminium and the control gear tray only is prewired with 2.5sq mm cable, 6A SP MCB and 32A 4pole terminal connector for loop-in loo-out arrangement with all materials & labour as required as per the direction of Engineer-3000K-50W LED Milky Acrylic Diffuser : Sq.445 x 713mmc Black Powder Coating-RAL 9004 Black-3 Years.(MAKE: klite/Philips/Reytek/Homdec/Jaguar) |
| 57 | SITC of 5meter Florus Lighting Pole long aesthetically Trishul Design designed single Arm decorative lighting pole supplied with Pelican fort Mini-3000K-Type II-Polycarbonate Optical Lens 50W LED decorative light having 80Lm/W Lumen output and made up of Spun Aluminium body & Milky acrylic (A9) diffuser KP-12016 Bishop Lighting Pole 5m Bishop Lighting Pole Lighting Pole Height (in mm): 4000mm Pole Size: Ø76.1 PoleType: Pole shall be made up of Mild Steel Body and coated with zinc rich primer & pure polyester powder coating of Black Finish. Base Plate size of Ø230x12mm thick with provision for founation bolt. Pole is Compatible for Ø70mm size for cable entry & exist. Junction Box service door is made up cast aluminium and the control gear tray only is prewired with 2.5sq mm cable, 6A SP MCB and 32A 4pole terminal connector for loop-in loo-out arrangement with all materials & labour as required as per the direction of Engineer-3000K-50W LED Milky Acrylic Diffuser : Sq.445 x 713mmc Black Powder Coating-RAL 9004 Black-3 Years (MAKE: klite/Philips/Reytek/Homdec/Jaguar) |
| 58 | SITC of 3.6 meter long aesthetically designed decorative Florus lighting pole supplied with 50W LED decorative light having 80Lm/W Lumen output and made up of Spun Aluminium body & Clear acrylic (A9) diffuser. Pole shall be made up of Mild Steel Body and coated with zinc rich primer & pure polyester powder coating of Black Finish with Genesis Luminaire of dimension 484mm x 417mm x 846mm Pole shall have Bottom dia of Ø89mm and Top dia of Ø50mm and having base Plate size of Ø230x12mm thick with provision for founation bolt. Pole is Compatible for Ø70mm size for cable entry & exist. Junction Box service door is made up cast aluminium and the control gear tray only is prewired with 2.5sq mm cable, 6A SP MCB and 32A 4pole terminal connector for loop-in loo-out arrangement with all materials & labour as required as per the direction of Engineer-in-Charge. The lighting manufactor must have own NABL Approved lab to justify the lumen efficacy.(MAKE: klite/Philips/Reytek/Homdec/Jaguar) |
| 59 | SITC of Bollard E27 Holder for LED Lamp, luminaire designed for surface mounted. Symmetrical light distribution. Luminaire made of extruded aluminium alloy (grade 6063), spun aluminium top cover Ø293 x 1.6mm thickness. Turn type polycarbonate locking system for easy maintenance and non corrosive stainless steel fasteners. Translucent acrylic diffuser. Pressure die-cast aluminium mounting plate Ø100.5 x 4mm thickenss with 2 elongated holes 15 x 10 to suit M8 bolts at PCD 55 for surface mounting on floor.Protection class IP54. Mechanical resistance IK08. Decorative die cast aluminium rook base cover. Pure polyester powder coated RAL 9004 Signal black, RAL9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. Prewired with E27 holder and suitable for operating on 240V, 50Hz single phase ac supply. Luminaire dimension : 293mm diameter x 990mm height.(MAKE:Philips/klite/Jaguar/Wipro) |
| 60 | SITC of 9x2w, surface mounted LED fountain light. Beam angle 20°. Luminaire complete housing made of marine grade 316 stainless steel. Step tempered glass of 8mm thickness. Hard wired for RGB 4 x 0.75mm2 3metres water resistant cable. Protection class IP68. Mechanical resistance IK09. Available colour temperature RGB. SDCM-3 MacAdam. K-Lite LED module with expected service life of at least 54,000 operating hours. Low Voltage at 12Vdc/24Vdc assures safety. Recommended installation depth upto 1meter below the water surface. Luminaire dimension : 150mm diameter x 62mm height. CE & BIS Certified.(MAKE: klite/Philips/Wipro/Reytek/Jaguar) |
| 61 | Surface mounted 6w, compact spot light designed to provide directional light. Beam angle 15° / 25° / 40°. Luminaire made of pressure die cast aluminium alloy of high corrosion resistance and non corrosive stainless steel fasteners. Clear toughened glass of 4mm thickness. Hybrid optics with lens & mirror finish pure aluminium reflector combination for higher efficiency, lower optical losses with optimum glare suppression. Swivel range of 0°-90°. Single cable entrance M10 cable gland. Protection class IP66. Mechanical resistance IK06. Pure polyester powder coated RAL 9004 Signal black, RAL9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. Available colour temperature 2700K / 3000K / 4000K / 5700K, Colour rendering index (CRI)>80. K-Lite LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Luminaire dimension : 101mm length x 64mm width x 93mm height. CE & BIS Certified. Inhouse NABL accredited lab.(MAKE: klite/Wipro/Philips/Jaguar) |
| 62 | SITC of spike mounted 12w, compact spot light designed to provide directional light.Beam angle 15° / 25° / 40°. Luminaire made of pressure die cast aluminium alloy of high corrosion resistance and non corrosive stainless steel fasteners. Clear toughened glass of 4mm thickness. Surface mounting spike made of polypropylene. Hybrid optics with lens & mirror finish pure aluminium reflector combination for higher efficiency, lower optical losses with optimum glare suppression. Swivel range of 0° - 90°. Single cable entrance M10 cable gland. Protection class IP66. Mechanical resistance IK07. Pure polyester powder coated RAL 9004 Signal black, RAL 9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. Available colour temperature 2700K / 3000K / 4000K / 6500K, Colour rendering index (CRI)>80. K-Lite LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >80%, Power factor >0.95, THD <10%, Surge protection 4KV. Luminaire dimension : 113mm length x 100mm width x 451mm height. CE & BIS Certified. Inhouse NABL accredited lab. (MAKE: klite/ Wipro/Philips/Reytek/Jaguar) |
| 63 | SITC of 18w, In Ground, 3000K, 4000K, 5700K,, CRI> 80, MacAdam Step 3, Wall Mounted luminaire. IP rating IP67, Die-Cast aluminium alloy housing (grade ADC12 with test certificate). 316 grade stainless steel front ring. Silicone seal gasket. SS fasteners. Mechanical resistance IK09. Dimension: 173mm dia x 220mm, Beam Angle 40degree (Tilatble 20degree) Pure polyester powder coated process : Acid treatment & pure polyester powder coating. ABS plastic installation housing for preparing the recess opening in ground. The luminaire are fixed in recess installation housing by stainless steel screws. Clear toughened glass diffuser with controlled upward light emission. Lamp fixed position, This luminaire contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire > 60,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Electronic Driver: On/Off, Driver efficiency >85%, power factor >0.9, THD <10%, Surge protection 2.5KV. CE and BIS Ceritified, (MAKE: klite/ Wipro/Philips/Reytek/Jaguar) |
| 64 | SITC of 3w, floor recess mounted compact in-ground luminaire. Asymmetrical light distribution. Polycarbonate optical lens for higher efficiency, lower optical losses with optimum glare suppression. Pressure die-cast aluminium housing, Stainless steel top ring (grade 316) with toughened glass. Polypropylene Black installation housing for preparing the recess opening in ground. Single cable entrance via grey M10 cable gland. All external screws are made of stainless steel. Clear silicone gasket. Protection class IP67. Mechanical resistance IK08. Available colour temperature 2700K / 3000K / 4000K / 5700K, Colour rendering index (CRI)>80. K-Lite LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Luminaire dimension : 88mm diameter x 118mm height. CE & BIS Certified. Inhouse NABL accredited lab. (MAKE: klite/ Wipro/Philips/Reytek/Jaguar) |
| 65 | SITC of waterproof powerjunctionbox /powercableterminalbox, IP65 made up of rugged,non corrosive, highimpact polycarbonate, molded nylon encases connectors that uses crew compression to secure the wires, protection against water jets and dust from all directions,includes5Way min10A connector terminal block Max. dimension : 80 * 250 * 85mm |
| 66 | EXTERNAL KIOSK PANELSupply, installation, testing and commissioning of IP 65 cubicle type sectionalised, front operated bottom entry outdoor type Kiosk Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrienkable PVC sleeve, base channel, complete with all accessories including interconnections, earth bus etc as required.One(1) 415V,125 Amp Moulded Case Circuit Breaker, 4P, Breaking capacity – 25 KA with adjustable Micro Processer Based Release with Ics=100% Icu with 3 NosIndicating lamp for ON/OFF/Trip with control fuse/ MCB, 3 Nos125/5 A 15VA Cl 1.0 CTs, 1No - Multifunction meter (V,A,KWHr, KW, P, F)( Make-LEGRAND DPX3/ Siemens 3VA/ Schneider CVS/ABB FORMULA) |
| 67 | EXTERNAL LIGHT MAIN PANELSupply, installation, testing and commissioning of cubicle type sectionalised, front operated top entry dust and vermin proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrienkable PVC sleeve, base channel, complete with all accessories including interconnections, earth bus etc as required.Make-L&T/Schneider/ABB/LegrandBusbar -125AL busbar with SC rating of 25KA suitable for operation at 415 Volt, 50 HZ , 3 phase Supply. One (1)-Incomer feeders consisting of One (1) - 125 Amp, 25 KA, 4P MCCB,Micro processor type with 3 Nos Phase indicating lamps with control fuse/ MCB, 3 Nos 100/5 A 15VA Cl 1.0 CTs, 1No - Multifunction meter (V,A,KWHr, KW, P, F)One set - Indicating lamp for ON/OFF/Trip and Phase indication with control fuse/ MCB.4 Nos - 100 Amp 4P MCB Outgoing2 Nos - 16 Amp DP MCB Outgoing1 No - 16 Amp SP MCB with 6/16 Amp socket outlet with 10 Amp modular switch and 1 No- Bracket Holder with 6 Amp Modular switch. |
| 68 | EXTERNAL FEEDERE PILLER (1,2& 3)Supply, installation, testing and commissioning of cubicle type sectionalised, front operated top entry dust and vermin proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrienkable PVC sleeve, base channel, complete with all accessories including interconnections, earth bus etc as required.Make-L&T/Schneider/ABB/LegrandBusbar -100AL busbar with SC rating of 25KA suitable for operation at 415 Volt, 50 HZ , 3 phase Supply. One (1)-Incomer feeders consisting of One (1) - 63 Amp, 25 KA, 4P MCCB with 3 Nos Phase indicating lamps with control fuse/ MCB, 3 Nos 100/5 A 15VA Cl 1.0 CTs, 1No - Multifunction meter (V,A,KWHr, KW, P, F)One set - Indicating lamp for ON/OFF/Trip and Phase indication with control fuse/ MCB.4 Nos - 40 Amp 4P MCB Outgoing10 Nos - 16 Amp DP MCB Outgoing1 No - 16 Amp SP MCB with 6/16 Amp socket outlet with 10 Amp modular switch and 1 No- Bracket Holder with 6 Amp Modular switch. |
| 69 | Earthing Earthing with GI earth pipe 4.5 meter long,40mm dia incluiding accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required |
| 70 | Providing and fixing 25mm X 5 mm GI strip at 0.50 meter below ground/suraface including connection/termination with nut, bolt, spring, washer excavation and refilling(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) as required. |
| 71 | Providing and fixing 6 SWG GI wire on surface or in recess for loop earthing along with cables etc as required. |
| 72 | Cable SupplySupplying & Testing of 1.1 KV grade Aluminium XLPE armoured power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. 3.5 core x95 sq mm |
| 73 | 3.5C X 70 sqmm Al |
| 74 | 3.5C X 25 sqmm Al |
| 75 | 4C X 16 sqmm Al |
| 76 | Supplying & Testing of 1.1 KV grade Cu XLPE Un Armoured power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. Make- Finolex/Polycab/HAVELLS/RR KABLE/KEI/Gloster of following size cables as per direction of Engg.-in-Charge. 3C X 4 sqmm |
| 77 | Cable layingLaying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size in the existing RCC/HUME/STONEWARE/METAL pipe as required.Above 25 sqmm and upto120 sqmm |
| 78 | upto 25 Sqmm |
| 79 | TERMINATION OF CABLES :-Supply & Making end Termination with brass compression gland and aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade (without cost of Cable)3.5 core x95 sq mm |
| 80 | 3.5C X 70 sqmm |
| 81 | 3.5C X 25 sqmm |
| 82 | 4CX 16 sqmm |
| 83 | Providing,fixing and laying of fallowing dia PN16 HDPE pipe 63mm(medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. |
| 84 | TRANSFORMERSITC of Supply of 63 KVA, 11/0.433 KV, 3 Phase, 50 Hz, Core type, Outdoor type, Natural Oil cooled, Copper wound, Distribution transformer manufactured as per IS: 1180 (Part 1): 2014 BIS level II /Star-1 with complete fittings, accessories, first filling of oil and LT sidecable end box having Off load tap switch ranging from +5% to -10% in step of 2.5% each as per specification. MAKE:OTPL/ALFA/OEU. |
| 85 | SUBSTATION for 63KVA 11/.433KV Substation33 KV Receiving Substation & 33KV/11KV HT Cabling - Supplying, installation, testing and commissioning of 33 kV Substation comprising 33 kV HT Panel, transformers 33kV/11 kV, 11 kV HT Panel, inter connections, 11kV HT UG cabling to the distribution substations on Ring main system, Substation earthing, substation safety equipments. |
| 86 | CCTV EXTERNALSupplying Installation Testing and Commissioning of 5MP IP IR 2.7 to 4 mm ~12 to 13.5mm or betterVarifocal Motorized lens outdoor Bullet Camera. • Ultra 265 (H.265 Compression U-Code technology)• 1/3″ 5MP progressive scan CMOS.• Effective Pixels: 2592(H) × 1520(V)• Smart IR, IR anti-reflection window.• IR Distance is up to 98ft (30M)• 0.02 lux @F1.8, AGC ON; 0Lux.5MP (2560×1440): Max. 25 fps.• WDR, 3D DNR, microSD, Make- Honeywell 50 series/pelco/axis. |
| 87 | Supplying Installation Testing and Commissioning of 4 MP IP IR motorized PTZ (4MP @25/30fps or better)camera, 1/2.7\\" CMOS, ICR, 2592*1944@ 25fps, 4 MP H.265/H.264/MJPEG, Triplestreams, DC12V & PoE, Micro SD card slot up to 256 GB, Alarm in/out , Audio 1/1, IP67, 2.7-13.5mm Motorized Varifocal lens, IR anti- reflection window, Built-in bracket, IR range: up to 100m, Digital WDR Range, 3D-DNR for noise reduction, Audio In and Out, Alam in and Out IPv4 network supported, IP67 rated for weather proofing, ONVIF, POE IEEE 802.3af, (UL, FCC, CE, BIS certified).Make- Honeywell 50 series/pelco/axis. |
| 88 | SITC of 32Ch Network Video Recorder, Support Ultra H.265/H.265/H.264 video formats Supports mainstream cameras of ONVIF conformance(Profile S, Profile G, Profile T and RTSP protocols. Support 2-ch HDMI, 1-ch VGA. HDMI1 and HDMI2 up to 4K (3840x2160) resolution Up to 12 Megapixels resolution recording. Support RAID 0, 1, 5, 6, 10, 8 SATA HDDs, Up to 10TB for each HDD. Support cloud upgrade. Make- Honeywell 50 series/pelco/axis. |
| 89 | Supply, Installation,Testing & Commisioning of Surveliance 10 TB HDDMake:- WD/Segate/Toshiba |
| 90 | Supply and lying of 4-pair Cat6 UTP cable for camera connectivity in existing conduits.Make:Digisol/Legrand,Dlink. |
| 91 | Supply and installation of 24 Port Layer2 Giga (10/100/1000BaseT) PoE Switch with 4 x 1Gig SFP Port , Switching Capacity 56 Gbps, Throughput 41.7 Mpps ,Management Port 1 x RJ 45 Console port ,PoE power budget 370 Watt, Switch should support IEEE 802.3af & IEEE 802.3at standard ,MAC Address 16K , Jumbo Frame 12K ,Temperature Working 0°C~50°C, storage -40°C~70°C, Power Supply AC: 100~240VAC.Digisol Model No. DG-GS1528HPE-P/ Eq. model of Cisco/HP |
| 92 | Supply and Installation of 55\\" UHD IPS Commercial Digital Display for Small Size Discussion & Chambers: Brightness (330 nits or higher), Dynamic Contrast Ratio (Dynamic MCI (Hz)):1000000:1), 1000000:1, Static (Panel) Contrast Ratio-1200:1, Response Time (G to G)-8 ms, Refresh Rate.-60 Hz, Life span (hrs)-30,000, Speaker (Sound Output):10W + 10W, Speaker System: 2.0 ch, DVB-T2/C Broadcasting System, Commercial Smart UX, webOS version (webOS 6.0), BIS Certification with 3 years onsite warrenty. Make: Samsung/ LG /SONY |
| 93 | SITC of 6\\" X 6\\" PVC box. |
| 94 | SITC of HDMI 2.0 cable, 5m. MAKE: FALCON/HONEYWELL/ LIBERTY |
| 95 | SITC of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds Up to 10/100-Base-T and 1000-Base-T. Available In LSZH Jacket- Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50μ’’ Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies. Make: Systimax, Legrand, Panduit(1 mtr length) |
| 96 | SITC of 9U/500D Wall Mount Rack with Accessories: The rack size should be 600W x 500D, Front frame integrated with top, bottom, front and two side panels for better rigidity and strength, Front Glass Door with Lock loaded, Compliance with standards shall be UL 2416., DIN 41494, IEC EN 60529, IEC EN 62262 , IEC EN 60068-2-11 , ISO 9001:2008 including Power Distribution Unit (06/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Lengt), 1 cooling Fan(230V AC - 90 CFM, dB 42), 2nos 1U Metal Cable manager with Plastic cable loops and H/W screw. Make:Valrack, Rittal, Legrand |
| 97 | PH WORKEarth work in excavation in foundation trenches, column foundation, pit, etc in all kind of soil including moorum stony earth and earth mixed with boulders except sheet rock and boulders not requiring blasting including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site with initial lead of 50 mtr and all lifts, including shoring, shuttering & dewatering (if required) with cost of labour, labour cess, hire & running charges of all machineries, sundries & T&P required for the work complete as directed by the Engineer in charge.Upto 1.5mtr Depth |
| 98 | Beyond 1.5mtr to 3.00 mtr Depth |
| 99 | Excavation of founation in hard rock (granite) removed by chiselling including dressing and levelling the bed not exceeding 1.5m in depth and depositing the soil within initial lead of 50m and as per specification approved by the Department.(a) Upto 1.5mtr Depth |
| 100 | Disposal of surplus/ excavated materials by mechanical means within 5km. Lead away from the site including cost of all labour , T&P complete as per the direction of the Engineer-in-charge.Ground Floor |
| 101 | Filling the Foundation and Plinth, sides of foundation, etc. with excavated materials (excluding rock), in layers not exceeding 0.225 m in depth including cost of watering, ramming, dressing and levelling the top to proper level & gradient, cost of labour, conveyance, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge.Ground Floor |
| 102 | Supplying and Filling with Sand in Foundation and Plinth in layers not exceeding 20 cm in depth, well watered and compact , top surface dressed and levelled to proper level and gradient including cost of all materials , conveyance,taxes, royalties, loading, unloading, cost of all labour, T&P, etc.All compelete as per the dirrection of Engineer-in-charge. Ground Floor |
| 103 | PCC WORKProviding and lying Plain Cement Concrete of proportion (1:3:6) in foundation & floor using 40 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge. Beyond 1.5 M to 4.5M Depth |
| 104 | Upto 1.5m depth |
| 105 | RCC WORKProviding, lifting, hoisting and laying in position Machine Batched , Machine Mixed and Machine Vibrated Design mix Cement Concrete of M-25 Including the cost of Centering and Shuttering (minimum cement content not less than 403Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance, loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement.R.C.C. foundation and footing bases of columns mass concrete pre-cast slab etc.Beyond 1.5 M to 4.5M Depth |
| 106 | R.C.C. foundation and footing bases of columns mass concrete pre-cast slab etc. |
| 107 | R.C.C. Grade Beams |
| 108 | R.C.C. Beams, columns, grider and bressmer etc.Ground Floor |
| 109 | R.C.C. Floor and Roof slab, landing, balconies,Projecting sun shades and chajjas up to 4.3Mtr. Height.Ground Floor |
| 110 | R.C.C. WallGround Floor |
| 111 | R.C.C. Lintels. |
| 112 | Providing & fixing TOR Fe-500 HYSD Reinforcement bars of required diameter and approved quality for Reinforced Cement Concrete work including straightening, cutting, bending, binding, welding(if approved) , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings (BBS) with provision of standard fan hooks including the cost of all materials, cost of all labour, conveyance, loading, unloading, cost of binding wires of 18 to 20 gauge, T&P, etc, all complete as per the direction of Engineer-in-Charge.Note: (Linear measurements will be taken & quantity will be calculated on standard weight. Lap length of bars & Weight of binding wire will not be considered for measurement and payment).Upto 1.5 M Depth |
| 113 | Beyond 1.5 M to 4.5M Depth |
| 114 | Providing 12mm thick cement plaster in cement mortar (1:4) with neat cement punning including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats, bars, etc only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, taxes, royalties, cost of all labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge.Ground Floor |
| 115 | Water ProofingProviding and applying waterproofing treatment to sound,moisture free concrete surface using Brushbond Ultraflex or equivalent- 2 component High Performance & Ultra flexible polymer modified elastomeric waterproofing membrane system capable of bridging substrate cracks up to 1 mm which supplied in 25 kg pack. System includes proper surface preparation to remove loose dust, dirt, loose mortar, curing compound etc., carry out cementitious injection grouting at leakage points and construction joints using cement slurry modified with Cebex 100-Plasticised expansive grout admixture supplied in 225 gm pouch, application of polymer modified coving at floor-wall junction, filling of annular space around rain water outlet using Conbextra GP2 - Non-shrink cementitious grout and application of two coats of Brushbond Ultraflex at a coverage @ 16m2 per 25kg pack to achieve 1 mm thickness in two coats followed by carry out protection screed / plaster etc. complete including all tools and tackles as per manufacturer’s specification.Brushbond Ultraflex cured material shall shall be having crack bridging of 1 mm, Elongation at Break (ASTMD 412) – >150 %, Tensile Strength (ASTM D412) – 1 N/mm2, Adhesion to substrate (ASTM D4541:2002): > 1.0 N/mm2, Water Permeability EN12390 (part8) 2008) Negative Pressure: Nil, Water vapour transmission (ISO 7783:2018): ˷20.81 g/m2.hr. Brushbond UltraFlex conforms to the requirements of DIN 1048, Part 5, 1991, ISO 7783:2018, ASTM D412 : 2013. Brushbond UltraFlex is deemed to be suitable for use with potable water sources as tested as per USFDA CFR 175-300. Item rate is inclusive of materials all labour, tools and tackles, scaffolding and transportation etc. but excluding protection screed concrete complete as per specification and as directed by EIC. (UGR Inner wall & base) |
| 116 | Supplying and fitting and fixing stainless steel 304 grade in said rail using 5mm dia 2mm thick circular pipe and balustrade 32mmx32mmx2mm at the rate of mtr.Center to center and square pipe 32x32x2mm below including welding with stainless steel elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge. |
| 117 | Providing fitting and fixing RCPC cover etc complete as per direction of Engineer-in-charge |
| 118 | Supply all materials, labour, T&P and providing,fitting and fixing submersible pump with electric motor to run on Single/Three phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing,commissioning,trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.. Make-XYLEM or equivalent2 HP three phase 5 stage head range 20 to 30 metres, discharge 150 to 200 L.P.M with outlet dia of 50mm (1W+1S) |
| 119 | DOL control panel |
| 120 | 4 sqmm cable |
| 121 | INTERNAL & EXTERNAL (P.H)Providing all materials, labour, T&P for laying/ fixing of following dia uPVC pipes Sch-80 as per ASTM-D-1785/2004 including fixing of required size PVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes, duties, transportation, scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHIRVAD or Eqv25mm dia |
| 122 | 32mm dia |
| 123 | 50mm dia |
| 124 | Providing all materials, labour, T&P for fitting & fixing of following Brass Ball Valves with ISI mark in all floor & fixing with the pipes after cutting the pipes to required shape & size including wastage etc. of following nominal diameter, all complete including testing the joints with required water pressure.The cost inclusive of all duties,transportation scaffolding etc. all complete as per specification and direction of Engineer-in-charge. Make:ZOLOTO/LEADER or Eqv50mm dia ball valve |
| 125 | 32mm dia ball valve |
| 126 | 25mm dia ball valve |
| 127 | PUMP HOUSE-Providing and laying Brick Masonry work in Foundation & Plinth using Fly ash bricks of 25 Cm. x 12 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:4) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge. |
| 128 | Providing and laying of Full Brick Masonry work in Superstructure using Fly ash bricks of 25 Cm. x 12 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:6) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge. |
| 129 | Providing 6mm thick cement plaster in cement mortar of (1:4) to ceilings of roof slabs, stairs, landings, chajja, shelves, columns, beams and lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading and royalties, all labour, scaffolding, watering and curing , sundries, T&P etc. complete as per direction of the Engineer-in-charge |
| 130 | Providing 16mm thick cement plaster in cement mortar (1:6) to the surfaces of brick masonry wall including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats, bars, etc only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, royalties, cost of labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge. (Inside Uneven Surface) |
| 131 | Providing 12mm thick Cement Plaster to the Surface of Brick Masonry Wall in Cement Mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.(Outside Even Surface) |
| 132 | Providing and applying 2 coats plastic emulsion paint of approved quality and shade over a coat of wall primer of approved quality to surfaces (interior) including throughly brushing the surface free from foreign materials by sand papering including of all materials, labour, conveyance, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants etc as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use) |
| 133 | Providing and applying 2 coats of Weather coat paint of approved make, quality and shade to the external surface of the building over a coat of primer after finishing the plastered surfaces of approved make and finished the surfaces smooth and even to receive the painting after cleaning the plastered surface perfectly by watering and brushing including the cost of all materials, cost of all labour, conveyance, taxes, loading, unloading, scaffolding, staging, watering and curing,T&P, etc, all complete as per the direction of Engineer-in-charge. (Note: Colour & shade to be approved before procurment & use). |
| 134 | Supplying and finishing the inside plastered surface of wall using cement based wall putty (Water based) of approved make and quality and finished smooth and even surface to receive the paint including the cost of all materials, cost of all labour, conveyance, taxes, loading, unloading, scaffolding, T&P, etc, all complete as per the direction of Engineer-in-Charge.Internal & External Putty |
| 135 | Painting two coats of synthetic enamel paint over Iron /Wood Works as per approved shade of approved quality over a coat of primer, sand papering, polishing the surface including cost, conveyance, materials, labour, T&P, scaffolding etc. as required for the work complete as per direction of Engineer-in-charge. (The paints and primer are to be approved before procurement and use)Ground Floor |
| 136 | Supplying and fixing of Anodisied 15 microns / Powder coated 60-70 microns approved colour aluminium 22mm Series Sliding 2 Track sliding window Unit with suitable aluminium extrued profiles. the system should design to accommadate 5mm clear toughened glass. the rate inclusive of hardwares like antilift,roller, touch lock cum handle,epdm gaskets, felt along with all accessories etc complete. the gap between the wall and window will be filled with silicon weather sealent in the outer side. 2 Track -2 Panel Outer frame - 45 X 45 X1.2MM (Size - 1500mm * 1500mm & Glass - 5mm clear Toughened ) Shutter Frame - 27 X 65 X1.2MM (MAKE - WINPLUS / ALUPURE / REKLAD) |
| 137 | Supplying, fitting and fixing of M.S. grills in windows including screws as may be required etc with cost, conveyance, labour, T&P etc. required for the complete in all respect. |
| 138 | Providing average 25mm thick grading Concrete in C.C ( 1:2:2 ) using 6mm size crusher broken black hard granite chips using 2% water proofing cement compound (Make: Sika / Fosroc / Equivalent) after scraping and cleaning the roof surface and finishing smooth to proper slope and gradient including cost of all materials, conveyance, sundries,T&P watering and curing by ponding water over terrace slab etc. complete as per the direction of the Engineer-in-charge.Ground Floor |
| 139 | Providing and installing two component acrylic modified cementitious waterproofing coating with Masterseal 551 /Equivalent over roof slab after carrying out pond test on roof slab, filling all defects, saturating the surface, mixing the products and then application in 2.0 mm thickness (1.8 Kg / sqm coverage rate for 1.0 mm thickness) in suitable layers complete in all respect, all materials, tools, plant & labour complete in all respect.Density 1850kg/m³ , Mix ratio (Powder to liquid) 3:1 by weight ,Water penetration Din 1048 1.5 Bar no leakage Potlife @ 25°C 2 hours & @ 40°C 30 minutes,Recoatable: 8-12 hours Elongation >42% (air) & >31% (under water),Tensile strength >20 kg/cm2 ,VOC content (HK prod code P10-17) 0.5 g/LGround Floor Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
