|
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering ncluding shoring and strutting etc. complete. (Lift upto 1.5 m.) By Manual Means (Edsr It.No.21.02) (Reference No.BDA 1) Additional specification Bd.A.1 Page No. 259. |
| 2 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Manual Means. (Edsr It.no.21.06) (Reference No.BDA 2) Additional specification Bd.A.2 Page No. 259. |
| 3 | Providing and laying in situ,cement concrete in M-10 oftrap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, compacting and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer, With natural sand.(Edsr It.no.24.01 ) (Reference No.BDE 1), Additional specification Bd. E. 1 Page No. 287. |
| 4 | Providing and laying in situ cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. etc. complete, With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.(Edsr It.no.25.11 ) (Reference No.BDF 3), Additional specificationBd.F.3 Page No. 298 and B.7, Page No.38. |
| 5 | Providing and casting in situ cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Natural sand.(Edsr It.no.25.31) (Reference No.BDF 5 ), Additional specification Bd.F.5 Page No. 300 and B.7, Page.No. 38. |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand (Edsr It.no.25.50) (Reference No.BDF 6), Additional specification :- Bd.F.6 Page No. 300 and B.7, Page No.38. |
| 7 | Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.(Edsr It.no.27.12) (Reference No.BDG), Additional specification As director by engineer incharge and BDG- 2 & 5. |
| 8 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm. to 20cm. Including watering and compaction etc. complete. Spec. No. : Bd.A. 11/Page No. 263.(Edsr It.no.21.37) (Reference No.BDA 11), Additional specification Bd.A.11 Page No. 263. |
| 9 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. |
| 10 | Providing and casting in situ cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),(Edsr It.no.24.04) (Reference No.BDE 3), Additional specification Bd.E. 3/Page No.288/I.S. 456 (2000). |
| 11 | Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete (SSR I No 27.13 |
| 12 | Providing and casting in situ cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.(Edsr It.no.25.70) (Reference No.BDF 8), Additional specificationSpec. No. Bd.F.8 Page. No. 302 and B.7, Page No.38. |
| 13 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.(Edsr It.no.26.33) (Reference No.BDF 17), Additional specification -Bd.F.17, Page No. 306. |
| 14 | Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. (Edsr It.no.32.02) (Reference No.BDL 1), Additional specification -Bd.L.1 Page No. 367.20mm |
| 15 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. (SSR Item No 32.03.) |
| 16 | Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. (SSR I No 33.42) |
| 17 | Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. |
| 18 | Providing and applying plastic emulsion paint of approved quality, colour and shade to old surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.(SSR I No 36.13) |
| 19 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 0.90m x 0.60m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge.(Edsr It.No.6.47 ) (Refernce No.MORTH 801) (Additional Specification. MORTH 801). |
| 20 | Total Royalty Charges of Sand |
| 21 | Total Royalty Charges of Murum /Boulder/Hand broken Metal |
| 22 | Test for Sand - Fineness Modulus (Sieve Analysis),Silt & Clay Content |
| 23 | Test for Bricks - Water Absorption, Compressive Strength, Efflorescence (Set of 5 Bricks}. |
| 24 | Test for Murum - Liquid limit & plastic Limit. |
| 25 | Test for Concrete - Compressive Strength of C.C. Cube(Set of 3 cubes) Please Enable Macros to View BoQ information |
