|
| 1 | Earthwork in excavation in dense or hard soil/murrum, soft rock with earth pocket and boulders, Hard rock including removal of obstructions such as small trees, vegetation etc. and removal of excavated material up to a lead of 50m and a lift of 1.5m including refilling foundation trenches. All labour and material etc. complete. |
| 2 | Earthwork excavation in hard rock, laterite boulders interspersed with murrum etc. including removal of obstruction such as small trees, vegetation etc., refilling the trenches with suitable excavated material or earth removed from nearby areas and removal of unsuitable excavated material up to a lead of 50m and a lift of 1.5 m. All labour and material etc. complete. |
| 3 | Earth filling in plinth and under flooring with suitable available excavated earth including depositing in layers not exceeding 20 cm., consolidating watering and ramming complete. All labour and material etc. complete. |
| 4 | Dismantling and clearing of cement concrete of waterproofing ..etc. in trap stone metal without causing any damage to the structure, clearing the dismantled materials and stacking within a lead of 100 m including all lift , cleaning surface, etc. as directed. All labour and material, tools & plant etc. complete. |
| 5 | Demolishing RCC work in trap stone metal including stacking of serviceable material and disposal of unserviceable material within a lead 0f 100m including all tools & plant , labour, material ,providing props ,scaffoldings etc. complete. |
| 6 | Extra over item of above for cutting of steel in RCC work (sectional area of the RCC work to be measured including all labour, material tools and plant, scaffoldings etc. complete. |
| 7 | Dismantling flooring with stone slab/IPS ..etc. including stacking of serviceable materials and disposal of unserviceable materials at places pointed out within a lead of 100 mts and all lift including all labour and materials , tools and plants etc. complete. |
| 8 | Dismantling flooring tiles laid in cement mortar including stacking of serviceable items & disposal of unserviceable materials within a lead of 100m including all labour & material, tools & plant etc. complete. |
| 9 | Removing existing plaster carefully by Stripping clearing away the same at places pointed out within a lead of 100m, cleaning the surfaces etc. As directed. All labour & material, tools & plant etc. complete. |
| 10 | Exposing existing old & worn out RCC column, beams and slabs etc. up to the main reinforcement carefully by means of chisel and hammer including necessary scaffolding, stacking the same on ground in the compound etc. complete as directed (surface area exposed after final chipping, chiselling etc. will only be measured and paid for). |
| 11 | Soling with hard laterite rubble stone of 20 cm to 30 cm size including hand packing etc. complete. All labour & material ,tools & plant etc. complete |
| 12 | Cement concrete (1:3:6) using 20 mm graded black trap stone metal out of quarried boulders as coarse aggregate including mixing, depositing, consolidating, levelling, curing etc. all labour and material etc. complete. |
| 13 | Cement concrete (1:2:4) using 20 black aggregate as coarse aggregate including mixing, depositing, consolidating, levelling, curing etc. All labour & material etc. complete. |
| 14 | RCC (1:11/2:3) mix using 20mm graded black trap stone metal out of quarried boulders as coarse aggregate , including mixing, placing, consolidating, vibrating, levelling, curing etc. but excluding the cost of shuttering and reinforcement. All labour & material etc. complete. |
| 15 | Providing & fixing shuttering for the column etc. of any size and shape including cleaning, oiling, closing, gaps, removing shuttering after concreting, provisions of necessary props, bracings and other supports etc. All labour and material etc. complete |
| 16 | Providing & fixing shuttering for the columns, beams, lintels etc. of any size and shape including cleaning, oiling, closing, gaps, removing shuttering after concreting, provisions of necessary props, bracings and other supports etc. All labour and material etc. complete |
| 17 | Providing & fixing shuttering for the slab etc. of any size and shape including cleaning, oiling, closing, gaps, removing shuttering after concreting, provisions of necessary props, bracings and other supports etc. All labour and material etc. complete |
| 18 | Providing and fixing reinforcement with TMT/tor steel/mild steel including cutting, bending, tying grills, placing in position, holding in position during concreting, including cost of binding wire. All labour and material , tools & plant etc. complete . |
| 19 | Constructing masonry in foundation and plinth using precast cement concrete solid blocks having a crushing strength of not less than 35kg./cm2 (28 days curing) with a mix not leaner than (1:5:10) in cement mortar (1:6) including providing specially moulded blocks at junctions & corners, curing etc. All labour & material etc. complete. |
| 20 | Constructing masonry in superstructure by using precast cement concrete solid blocks having a crushing strength of not less than 35kg./cm2 (28 days curing) with a mix not leaner than (1:5:10) in cement mortar (1:6) including providing specially moulded blocks at junctions & corners, curing etc. All labour & material etc. complete. |
| 21 | Constructing masonry in superstructure such as partition walls, parapets etc. 10 cm thick using precast cement concrete solid blocks having a crushing strength of not less than 35Kg./cm2 (28 days) and a mix not leaner than (1:5:10) in cement mortar (1:4) including providing specially moulded block at junctions and corners, providing 2 M.S. bars 6mm dia at every fourth course, all scaffolding, lifts, raking out joints, curing etc. All labour & material etc. complete. |
| 22 | Constructing masonry in foundation and plinth for columns, walls of various thickness, sills etc. exceeding 20cm in width with well dressed laterite stone in cement mortar (1:6) including providing specially dressed stones at junctions and corners, curing ,scaffolding, all lifts, raking out joints etc. All labour & material etc. complete |
| 23 | Constructing masonry in superstructure for columns, walls of various thickness, sills etc. exceeding 20cm in width with well dressed laterite stone in cement mortar (1:6) including providing specially dressed stones at junctions and corners, curing ,scaffolding, all lifts, raking out joints etc. All labour & material etc. complete |
| 24 | Providing plinth coarse, coping, window sills etc. coping over compound wall, of cement concrete (1:2:4) mix using 20mm black trap stone metal out of quarried boulders as coarse aggregate including mixing, depositing, side shuttering, consolidating, levelling, curing etc. All labour and material etc. complete |
| 25 | RCC jally of any approved pattern/design with CC (1:2:4) mix using 10mm graded aggregate, average 5 cm thick precast members reinforced with 6mm dia M.S./ torsteel reinforcement bars including all shuttering, tying and placing of reinforcement and keeping the same in position, mixing, placing, consolidating, curing and finishing with C.M.(1:3) 6 mm thick all shuttering work, cost of steel reinforcement and fixing the jally in position with cement mortar 1:3 etc. all labour & material etc. complete. |
| 26 | Floor finishing with C.M.(1:3) 15mm thick (av) including mixing, finishing smooth with cement slurry, thread lining curing, adding colour /Redoxide..etc. etc. All labour and material etc. complete. |
| 27 | Finishing cooking platform with 25mm thick polished cudappa stone slabs over 20mm thick C.M.(1:6).including polishing with black polish All labour & material etc. complete. |
| 28 | Providing flooring with ceramic tiles Ist quality of approved make laid over 12mm thick C.M. (1:3)including cleaning, curing etc. All labour & material, tools & plant etc. complete. |
| 29 | Providing skirting/ dadooing to the required height with best quality ceramic tiles spartek or equivalent quality set over a base of cement mortar (1:3) 10mm thick including cutting the tiles where required necessary specials, pointing, curing etc. All labour & material complete. |
| 30 | Sealing the cracks in walls, RCC members etc. by use of scaffolding or Jhulla for the crack width up to 20 mm using suitable crack fill material of cement and fine quartz sand putty including` necessary addition of chemical in the proportion of 1:1 or as per manufacturer's instruction, properly grouting into cracks after necessary cleaning including applying two coats (100 mm width) of Polyalk WP of approved brand over sealed crack or as directed etc, including removing the roots of plants and grown vegetation. All tools, plants, labour and materials etc. complete (Payment shall be made in running meter of sealed crack). |
| 31 | Thorough cleaning of the exposed steel, removing the scales and rust with wire brush and emery paper and applying suitable chemical viz .'Rusticide','Rust' converter, Zentrifix KMH or equivalent, approved in two coats as per manufacturers specification as and as directed , providing additional bars if required as per existing diameter bar as main reinforcement/ stirrups for beams, columns /chajjas including welding of bar/tying or by ensuring shear connectors to the reinforcement (Reinforcement to be measured under Item no. 19) by drilling holes to beams for anchoring shear connectors ( to be measured under item for drilling and fixing shear connectors), etc. and securing the bars in position etc. but excluding the cost of steel reinforcement. All tools, plants labour and materials etc. complete. |
| 32 | Drilling 12 mm dia and inserting 10mm dia shear connector tor steel bars (20 cm long) by anchoring upto 10cm in depth as directed including grouting with Hilty compound or equivalent, cleaning watering etc. All tools, plants, labour and materials etc. complete. |
| 33 | Providing and applying Rust passivator primer Nito Zinc of FOSROC or any other approved in ratio as per manufacturers specification after cleaning the existing surface from dust/ loose particles by applying air by air blowers under pressure etc. All labour and material etc complete as directed |
| 34 | Providing and applying bonding agent in ratio of 2:1 by wt. of Sun epoxy 358,Hack aid plus,plyalk EP of sunanda or equivalents per manufacturers specification after cleaning the existing surface from dust/ loose particles by applying air by air blowers under pressure etc. Complete as directed. |
| 35 | Providing and laying of micro concrete of fosroc OR any other approved brand including shuttering and preparing the surface ,mixing ,placing in position ..etc. . All labour and materials etc. . Complete. |
| 36 | Plastering with C.M. (1:5) 15mm thick in two coats mixed with approved waterproofing compound in appropriate ratio for external surfaces (Backing coat of 10mm & finishing coat of 5mm) including Patches, bays, bands, fluting, scaffolding and fixing of chicken mesh were ever instructed and cleaning of all dirt's, raking out joints, hacking, scrubbing, chamfers, beading, curing, all lifts etc. All labour & material complete |
| 37 | Plastering with C.M. (1:3) 15mm thick in two coats to internal surfaces (Backing coat of 10mm & finishing coat of 5mm) to walls including patches, bands ,fluting, scaffolding, racking out joints ,including fixing of chicken mesh, hacking, scrubbing and cleaning of all dirt ,chamfers ,beading ,curing all lifts etc.. All labour & material etc. complete |
| 38 | Flush pointing with cement mortar (1:3) on laterite/concrete block masonry etc. incl. raking out joints, cleaning, scaffolding, curing etc. All labour & material complete. |
| 39 | Ruled pointing with cement mortar (1:3) on laterite/concrete block masonry etc. incl. raking out joints, cleaning, scaffolding, curing etc. All labour & material complete. |
| 40 | Providing and applying polymer modified cementitious waterproofing coating to the surface with acrylic polymer -polyalk wp of sunanda, Pidicrete URP of Dr fixit Or Tapecrete of CICO or any other approved brand ..etc mixed in cement slurry in ratio of 1:2 or as specified by the manufacturer in three coats as per the manufacturers specifications with all labour ,scaffolding ..etc complete. |
| 41 | \\"Repairs to existing waterproofing course by providing cement based waterproofing layer on terrace over the existing brickbat coba with CM 1:4(1cement :4 sand )20mm thick with expansive polymer additive conplast 421 IC of m/s. Fosroc or equivalent, finishing top with cement slurry admixed with expansive polymer , including dismantling the plaster up to 300 mm height (above finished level) of parapet, columns, staircase room walls etc and cleaning the base surface , applying approved bonding coat on brickbat coba , treating cracks in the brickbat coba, doing cement slurry grouting wherever necessary , treatment to junctions, any gaps / possible gaps between roof and side walls as well as entrance of rainwater drainage pipes to be properly scrapped / chipped and filled to avoid any seepage to side walls etc. and covings, vata , gola laid to proper slopes, lines and levels and carting away debris and curing .etc.. and making the terrace completely waterproof including 300 mm (above finished level) vertical face on parapet, columns, staircase room walls etc. . (Only profile area of waterproofing shall be measured, vatta will not be paid extra).Carrying out test for water tightness by impounding water for 24 hours etc. complete as per detail specifications as directed .All labour materials tools and plants etc complete. |
| 42 | Providing & applying/ Treating top surface of roof terrace top along with expansion joints, sun shades, wall junctions, parapet... etc. by applying three coats of weatherproof exterior elastomeric coating with New coat of Dr. fixit ,brushbond roofguard of Fososroc or equivalent over a coat of exterior primer coat of Prime seal or equivalent including cleaning the surface, opening and filling the cracks as per manufacturers specifications and instructions and as directed. All materials, labour, tools, equipment, finishing and testing etc. complete. |
| 43 | Providing waterproofing with tarfelt sheets of approved brand ,Dismantling and removing old existing Tarfelt from the roof Expansion joint portions and vertical parapet for full length for a width of 0.90 mtr., after applying bitumen primer over the existing surface after suitably preparing the surface by cleaning the area for application of tar felt or as directed by the Chief Engineer or his representative. All labour, tools and plant etc. complete. |
| 44 | White washing in two coat over old work/maintenance painting including scaffolding, thoroughly booming the surfaces to remove all dirt, dust, loose scales of lime wash etc. All labour & material complete. |
| 45 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on old work (two coats). All labour & material etc. complete. |
| 46 | Primer painting in single coat on internal surfaces including Cleaning and preparing the surface and e . All tools ,plants, labour and materials etc complete. |
| 47 | Painting walls with plastic emulsion paint in two coats on old interior surfaces incl. Scaffolding, removing the old paint, cleaning & preparing the surfaces etc. All labour & material etc. complete. |
| 48 | Painting old (previously painted) iron/metal surfaces with two coat of synthetic enamel paint over a coat of primer of approved make and colour/shade including scrapping , Cleaning and preparing the surface necessary scaffolding/ladder etc. All labour and material complete. |
| 49 | Painting old (previously painted) wood/wood based surfaces with two coat of synthetic enamel paint of approved make and colour/shade incl. Cleaning and preparing the surface necessary scaffolding/ladder etc. All labour and material complete. |
| 50 | Painting old (previously painted) masonry/concrete/plaster/A.C. sheet surfaces with two coat of ready mixed paint incl. Cleaning and preparing the surface. All labour and material complete. |
| 51 | Application of Damp block (Asian/ Berger) paint to control dampness of internal walls / repaired surfaces, scaffolding. All tools, plant, labour and material etc complete. |
| 52 | Painting external surfaces of walls, roof top, bays, bands, chajjas, grooves with etc. with acrylic weatherproof exterior emulsion paint of approved quality/make , colour in two coats on existing old surfaces including scrubbing and cleaning the surface of all dirt, dust, , crack filling , touch-up putty ,curing, necessary, scaffolding, etc. complete as directed. All labour, materials, tools and plants etc. complete |
| 53 | Supplying & erecting in position structural steel work in single section (light sections up to 34 kg./m) incl. Cutting, hoisting, fixing in position and cleaning the surface, painting two coats of approved quality synthetic enamel paint of approved colour/ shade over a coat of red oxide zinc chromite primer etc. All labour & materials tools & plant etc. complete. |
| 54 | Providing barbed wire fencing with RCC post to the vacant plots in MPA estate as and when required |
| 55 | Supplying and fixing woven plain G.I wire fencing (chain link fencing of 75mm (3\\") x 8 SWG mesh chain link fencing including fixing to 65 x 65 x 8mm M.S angle posts including providing 2 nos 16mm dia M.S bars at top and bottom of fencing, painting the posts and M.S bars with two coats of synthetic enamel paint over a coat of red lead primer etc. All labour & material etc. complete. |
| 56 | Supplying and fixing concertina coil of Providing fencing with Concertina over ten rows of barbed wire fixed to M.S. Angles 65 x 65 x 8 mm over the compound wall, etc |
| 57 | Welding to any type of structural steel works tack welding or stitch welding of 6 mm thick as per IS specification etc. including required welding rods .etc. complete as directed. (Note: Steel sections, angles, plates if necessary will be supplied free of cost by the MPT. Contractor has to procure their welding plants. The item is in running Mtr. of weld length). |
| 58 | Cutting any type of structural steel works of any thickness by gas cutting complete as directed(Gas cutting with acetylene oxygen set will have to be provided by contractor. The item is in running Mtr. of cut length). |
| 59 | Repairs and servicing of Rolling shutters (Approx. minimum size size of shutters 3x2.5 mtrs) including removal and assembling after repair of i.e. top hood shaft cage, shaft case, shaft brackets, springs, side guides bottom rails, gear units, bearing , thoroughly cleaning all the components, adjusting the tensioning springs, overhauling or repairing shaft and gear units, re-conditioning and clips, realigning curtain ends, reconditioning dents if any, on the surface bottom rail and side guides, repairing the starters, inspecting , taking out and replacing the damaged or defective components, ensuring proper locking arrangements from both side and outside including all welding, drilling , straightening, grinding, erection of scaffolding, ladders, tools, tackles, labour, overhead profit, transportation with all consumables, such as lubricant like gears etc. and all hardware’s such as nuts, bolts, rivets, screws, washers, keys, etc. for effective working of rolling shutter. |
| 60 | Providing new Rolling shutters (approx. minimum size size of shutters 3x2.5 mtrs) including removal of old rolling shutter and taking away and providing a new assembly of top hood shaft cage, shaft case, shaft brackets, springs, side guides bottom rails, gear units, bearing , thoroughly cleaning all the components, providing tensioning springs, and surface bottom rail and side guides, repairing the starters, providing proper locking arrangements from both side and outside including all welding, drilling , straightening, grinding, erection of scaffolding, ladders, tools, tackles, labour, overhead profit, transportation with all consumables, such as lubricant like gears etc. and all hardware’s such as nuts, bolts, rivets, screws, washers, keys, etc. for effective working of rolling shutter. |
| 61 | Providing and erecting cup lock /H frame of steel double scaffolding of required height ,width and strength by sides of building at any level from ground to any floor height as directed including working platform etc. and maintaining it in serviceable condition for the required duration as approve and a directed and removing it thereafter ,necessary safety features for the workmen etc. complete.as per direction ..etc. . All labour equipment's materials etc. complete. |
| 62 | Supply of mini truck/tempo on hire basis as and when required of 6.00 cum capacity in working condition for 8 hours a day along with driver, required fuels in Port area for transporting building materials, debris ..etc. as directed within a lead of 6.00 kms etc. All fuel, driver, Maintenance etc. complete. |
| 63 | Supply of back hoe excavator machine with breaker attachment ( JCB ) in good working condition along with operator on Hire basis for 8 hours a day as and when directed for dozing , demolition ,levelling ..etc. . All fuel, driver/ operator, Maintenance etc. complete. |
| 64 | Supply of weed cutting machine petrol operated including fuel and oil etc and 01 operator for 8 hours a day including replacement of parts, etc on call basis etc. as directed. All labour and material etc complete |
| 65 | Supply of Tree prunning / chain saw machine- 22 inch petrol operated including fuel and oil etc and 01 operator and 01 helper for 8 hours a day including replacement of worn out chain (used for cutting trees) on call basis etc. including cutting of logs in 1mtr size and stacking neatly in place as directed. All labour and material etc complete |
| 66 | Cutting of stem/ branches of uprooted /fallen trees by using Chain Saw and manual means into manageable log size as directed |
| 67 | Supplying & fixing galvalume sheets of 0.45mm thick of Tata/Jindal or any other equivalent in roofing including drilling holes necessary self drilling screws G.I and bitumen washer etc. All tools,plants,labour and material etc complete. |
| 68 | Supplying & fixing galvalume ridges of 0.45mm thick of Tata/Jindal or any other equivalent in roofing including drilling holes necessary self drilling screws G.I and bitumen washer etc. All tools,plants,labour and material etc complete. |
| 69 | Supply of PVC/fibre corrugated transparent sheets of 1.5mm thick and 1.05 m width |
| 70 | Supply of Bonding agent of NITOBOND SBR (latex) of FOSOROC or any other approved |
| 71 | Supply of sand |
| 72 | Supply of Cement (50 kg Bags) |
| 73 | Supply of 10/20mm metal stone |
| 74 | Supply of CC block of size 30*20*15cm of 35 kg /cm2 compressive strength |
| 75 | Supply of white cement of JK Brand |
| 76 | Supply of following items |
| 77 | anodised aluminium tower bolt 15 cm long |
| 78 | anodised aluminium latch 20 cm long |
| 79 | Flush Door Stopper with rubber bush |
| 80 | anodised aluminium baby latch |
| 81 | anodised aluminium D-type door handle 10 cm long |
| 82 | s.s. butt hinges 75mmx40mm x 2.5 mm |
| 83 | Supply of teak wood beading frame 1.5”x1.4” |
| 84 | Supply of 3mm plain glass |
| 85 | Supply of 19 mm dia aluminium curtain rod |
| 86 | Supply of curtain end bushes of approved design |
| 87 | Supply of curtain cloth for windows of size 4 x 5 (Lung crash cloth type or equivalent of plain colours) |
| 88 | Supply of curtain cloth for doors of size 4 x 7 (Lung crash cloth type or equivalent of plain colours) |
| 89 | Supply of mortise lock Godrej 7 levers |
| 90 | Supply of pad lock Godrej make 7 levers |
| 91 | Supply of Mangalore tiles |
| 92 | Supply of Mangalore ridge tiles |
| 93 | Supply of colour coated GI. Sheet 0.4 mm thick |
| 94 | Supply of 6mm thick No.1 Marine plywood |
| 95 | Supply of 12mm thick No.1 Marine plywood |
| 96 | Supply of Rain protective Tarpaulin/plastic sheet. |
| 97 | Supply of bleaching powder |
| 98 | Supplying & fixing Automatic/ hydraulic door closer of 'Everite/ Godrej make including necessary screws, washers etc. All labour & materials complete. |
| 99 | Repairs to the aluminium frame sliding window, aluminium frame door including removing and refixing the shutters, cleaning the grooves, channels, replacing the worn out runners, rubber beading but excluding the cost of Glass. All tool, plants, labour, material, etc. complete |
| 100 | P & F in position anodised aluminium sliding windows of approved manufacturer to suit two track sliding, using best quality standard extruded anodised aluminium sections (manufactured to relevant I.S. specification) without horizontal glazing bars, glazed with 5.5.mm thick sheet glass fixing to RCC column/masonry with lugs of 16mm x 3.15mm x 10cm long or any other approved size embedded in C.C. (1:3:6) blocks of appropriate size incl. necessary bolting devices, handles, locking arrangements, fixing clips, metal putty, PVC/Rubber beading etc. |
| 101 | P & F in position anodised aluminium sliding windows of approved manufacturer to suit three track sliding, using best quality standard extruded anodised aluminium sections (manufactured to relevant I.S. specification) without horizontal glazing bars, glazed with 5.5.mm thick sheet glass fixing to RCC column/masonry with lugs of 16mm x 3.15mm x 10cm long or any other approved size embedded in C.C. (1:3:6) blocks of appropriate size incl. necessary bolting devices, handles, locking arrangements, fixing clips, metal putty, PVC/Rubber beading etc. |
| 102 | Providing and fixing windows single shutter panelled/glazed /panelled and glazed without ventilator, without frame but providing sal wood shutter with glass, handles, hooks, latches etc works. All labour & material etc complete. |
| 103 | Providing & fixing ornamental grills of approved pattern using M.S. flat, square bars, etc. or any other sections including welding, grinding, cutting, drilling holes, fixing with counter sunk screws etc. All labour & material etc. complete. |
| 104 | Dismantling & clearing away corrugated/ semi corrugated A.C sheets in roof including ridges, hips, gutters etc. & stacking the serviceable material & disposal of unserviceable material at places pointed out within a lead of 100m including all labour & material, tools & plant etc. complete. |
| 105 | Fixing asbestos cement corrugated sheets in roofing supplied by department including cutting/ mitering, drilling holes, fixing with necessary G.I. bolts, nut G.I. and bitumen washers etc. All labour & material, tools and plant complete.Note:1. A.C. sheets will be issued free of cost by department. However bolts, nuts, hooks, washers etc., are to be provided by the contractor at their own cost.Note: 2. Transportation of sheets from MM/AXEN(GCB) store shall be arranged by the contractor at his own cost. |
| 106 | Extra for A.C. corrugated / semi corrugated sheets supplied by the Port in vertical sheeting or to a pitch exceeding 60 degree |
| 107 | Fixing A.C. plain adjustable ridges including drilling holes, necessary G.I. bolts, nuts, G.I. and bitumen washers etc. All labour and material complete. Note:1. A.C. sheets will be issued free of cost by department. However bolts, nuts, hooks, washers etc., are to be provided by the contractor at their own cost.Note: 2. Transportation of sheets from MM/AXEN(GCB) store shall be arranged by the contractor at his own cost. |
| 108 | Supply of General waterproofing compound Dr.fixit pidiproof LW+ |
| 109 | Supply of Waterproofing and repair compound Dr.fixit Pidicrete URP |
| 110 | Supply of Fe 500 Torsteel bars of various dia of approved brand and sizes as specified |
| 111 | Supply of Structural steel angles of any size and of approved brand ..etc |
| 112 | Providing M25 Grade RMC concrete including transportation at site location as directed by Engineer |
| 113 | Laying interlocking concrete paving blocks supplied by the Department over a layer of sand cushion etc. complete. |
| 114 | Providing & laying interlocking concrete paving blocks of approved pattern, 100mm thick over a layer of sand cushion including spreading sand, laying the blocks to required slope, levelling, filling the joints with dry sand, cleaning the surface etc. as directed. All labour and material complete. |
| 115 | Execution of day to day works by supply of high skilled artisans like Carpenters, masons for works of restorative repairs, aluminium doors and window repairs, shutters and gate repairs etc as directed, with tools for a period of 8 hours per day as and when required etc complete |
| 116 | Execution of day to day works by supply of mazdoor with tools for a period of 8 hours per day as and when required etc complete |
| 117 | Dismantling doors, windows and ventilators having area less than 3.0m2 including removal of frames, fastening etc. from masonry and handing over to Chief Engineers Representative by shifting & stacking at Maintenance Section office Yard at Headland as directed including all tools & plant labour & material complete. |
| 118 | Supplying and fixing flush doors without ventilator 35mm thick both sides commercial faced using salwood frame including SS hinges 100 x 58 x 1.8mm size 4 nos. for door shutter providing M.S. hold fast 6 nos. embedded in C.C. (1:3:6) block, 16mm dia M.S. bottom pins etc. Including dismantling of old existing door frame and taking away the same etc finishing the damaged surface with CM (1:3), Painting of door and fame with two coats of synthetic enamel paint over one coat of wood primer. All labour & materials etc. complete. |
| 119 | P/F in position anodised aluminium louvered ventilators in single vertical bays with 4.00 mm thick 100 mm wide frosted glass louvers of approved quality / make using best quality standard extra lead anodised aluminium sections comprising to IS-733, frame shall have groove to receive weather strip all around, glass louvers shall have PVC gap closing gasket on top edge of louvers and approved through lever handle and operation fixed to outer frame and aluminium handle locking device, fixing to masonry, R.C.C. columns etc. as specified by manufacturer all gaps should be sealed with approved sealant etc .including finishing and making good the surface with plaster 1:3, cement concrete mortar, touch up painting for removed old ventilators surface, removing of old ventilators etc. All tools , plant labour & material etc. complete. |
| 120 | Supplying and fixing Flush door shutters of marine solid core 30mm thick both sides teak faced including providing 4 nos. S.S. hinges (100x70x4) mm minimum size teakwood beading patties, brass screws, polishing etc.complete. All tools, plant, labour & material etc. complete. (Old fittings like mortice lock,safety chins, etc.to be refitted to the new door. All tools , plant labour & material etc. complete. |
| 121 | Supplying and fixing Flush door shutters of marine solid core 30mm thick both sides commercial faced including providing 4 nos. S.S. hinges (100x70x4) mm minimum size teakwood beading patties, brass screws, polishing etc. complete. All tools, plant, labour & material etc. complete. (Old fittings like mortice lock ,safety chains, etc.to be refitted to the new door. All tools , plant labour & material etc. complete. |
| 122 | Supplying and fixing PVC single shutter door of standard size including aluminium frame all the accessories fixing to the wall with expandable fasteners, such SS butt hinges of size 100 x 70x4.0 mm, minimum 3 nos. per shutter, Including dismantling of old existing door frame and taking away the same etc finishing the damaged surface with CM (1:3), fixed by C.P. brass counter sunk as approved and fixed to the door frame as specified by the manufacturer or as directed complete. All tools , plant labour & material etc. complete. |
| 123 | Supplying & fixing mosquito proof netting of Netlon or any other approved brand to frames of windows /doors with Velcro tape with required screws nails .. etc..and stitching of other part of Velcro to the net including making making salwood frame for doors and fixing wooden beading patty to the door and window frame / shutter, All tools & plant labour & material complete. |
| 124 | Supplying & fixing mosquito proof netting of Netlon or any other approved brand to fixing to the old frames of windows /doors with Velcro tape with required screws nails .. etc..and stitching of other part of Velcro to the net all tools & plant labour & material complete. |
| 125 | Providing aluminium handles for the aluminium frame glass window as directed and approved . All labour and material, tools & plant etc. complete. |
| 126 | Providing 5.00 mm thick glass for the aluminium frame window/door, including removing the damaged glass, replacing the damaged beading, sealing the gaps in between wall and window frame using M seal, touch up painting as directed. All labour and material, tools & plant etc. complete. |
| 127 | Providing 4.00 mm thick pin headed/plain glass for louvered ventilators as directed. All labour and material, tools & plant etc. complete. |
| 128 | Providing and fixing double action hydraulic floor spring of approved brand and manufacturer including pivot for Aluminium shutter,cutting of floor ,embedding in floors required and making good same matching to the existing floor finishing and cover plates ..etc as directed . All labour and material, tools and equipment’s etc. complete. |
| 129 | Providing and fixing Silicone Sealant to the Aluminium window gaps, and gaps of the aluminium frame and walls by using silicone guns for providing sealant . All labour and material etc complete. |
| 130 | Supplying and fixing PVC corrugated sheets 1mm thick in roofing, vertical cladding etc including cutting , drilling holes, fixing with necessary G.I bolts, nuts, G.I and bitumen washers, etc including dismantling the damaged roof sheets and stacking within a lead of 100 mtrs. All tools, plants, labour and material etc complete |
| 131 | Supplying and fixing false ceiling with gypsum board 12mm thick of size of size 2'X2' or more supported on GI grip roof channel 2''X2'' for main support Including providing new main support to the roof as where required as per department direction . all labour and material etc complete. |
| 132 | Supplying & fixing Mangalore pattern tiles (Double inter locking Fort Brand roofing tile no.1/equivalent) in single layer over Sal/Jamba wood reepers 5 x 2.5cm including supplying & fixing ridge tiles, pointing with C.M. (1:2) and painting reepers with creosote oil etc.as directed. All labour and material, tools & plant scaffoldings etc. complete. |
| 133 | Supplying & fixing Mangalore pattern tiles (ordinary Mangalore tiles) in single layer over Sal/Jamba wood reepers 5 x 2.5cm including supplying & fixing ridge tiles, pointing with C.M. (1:2) and painting reepers with creosote oil etc.as directed. All labour and material, tools & plant ,scaffolding ..etc complete. |
| 134 | Supplying and fixing PVC eaves gutter 23cm dia necessary PVC/GI brackets , seam bolts GI washer etc. All labour and material etc complete. |
| 135 | Providing & fixing wash basin of vitreous china 550x 400mm with all accessories such as C.I. brackets, C.P. brass pillar tap, 32mm size rubber plug with C.P. brass china for outlet, 32mm C.P. brass 'P' trap with 8 cm deep seal with wall flanges, 12mm PVC plastic strap pipe with necessary inlet & outlet connection, 12mm dia brass stop cock including breaking & making good the wall painting brackets etc including dismantling the existing damaged wash basin with accessories including taking away the same etc. All tools, plant, labour & material etc complete. |
| 136 | Providing & fixing to the wall / floor etc C.P.V.C. pipes 12/15mm dia including jointing with sockets, bends, tees, etc all cutting , threading, jointing, material cost of pipes & specials, breaking the wall floor making good the same etc including dismantling the existing pipes and taking away the same etc. All tools, plant, labour & material etc complete. |
| 137 | Providing & fixing to the wall / floor etc P.V.C. pipes 32mm dia including jointing with sockets, bends, tees, etc all cutting , threading, jointing, material cost of pipes & specials, breaking the wall floor making good the same etc including dismantling the existing pipes and taking away the same etc. All tools, plant, labour & material etc complete. |
| 138 | Supplying & fixing in position approved make / type CP brass shower rose 100mm dia including dismantling existing shower rose and handing over the same to the department etc . All tools, plant, labour & material etc complete. |
| 139 | Supplying & fixing in position approved make / type CP brass bib cock 12/15mm dia including dismantling existing bib cock and handing over the same to the department etc . All tools, plant, labour & material etc complete. |
| 140 | Supplying & fixing in position approved make / type CP brass stop cock 12/15mm dia including dismantling existing stop cockand handing over the same to the department etc . All tools, plant, labour & material etc complete. |
| 141 | Providing and fixing flat ceiling with plain WPVC sheets 8mm thick including fixing to aluminium bracings, providing taping, scaffolding, transportation etc. All tools, plant, labour & material etc complete. Please Enable Macros to View BoQ information |
