|
| 1 | Construction of walling |
| 2 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: in cement mortar |
| 3 | Demolishing brick work manually/by mechanical means includingstacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In mud mortar |
| 4 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:1 meter from cutting edge All kinds of soil |
| 5 | Providing and laying of stone soling (dully hand packed) including watering dressing and ramming with all carriages loading un-loading and stacking etc complete. |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size |
| 7 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 9 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 10 | Brick work with FPS bricks of class designation 75 in foundation & plinth in cement mortar 1:6 ( 1 cement, 6 fine sand) including extra for brick work in superstructure above plinth level upto floor V level. |
| 11 | Brick work (AVAILABLE)with FPS bricks of class designation 75 in foundation & plinth in cement mortar 1:6 ( 1 cement, 6 fine sand) including extra for brick work in superstructure above plinth level upto floor V level.(LABOUR ONLY) |
| 12 | 12mm Cement plaster of mix 1:6 (1 cement : 6 fine sand). |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns |
| 14 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 15 | Finishing walls with acrylic smooth exterior paint of required shade onNew work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 16 | Reconstruction of Devri Stone Gate Pillars by engagement of Mason including dismantling of damaged portion, careful removal and stacking/disposal of unserviceable material, surface cleaning, chipping of old mortar joints, dressing and resetting of Devri stones in proper line, level and plumb, including use of cement mortar, curing, scaffolding, carriage of material within site and all labour, tools & tackles complete as per the directions of Engineer-in-Charge: Mason (for ornamental stone work) 1st class(Quantity is anticipated however payment shall be made as per actual as certified by the AEE concerned) |
| 17 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 18 | Structural steel work in single section, fixed with or without connectingplate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 19 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 meter openable length ( total length 90m), having 50 nos rounds per 6 meter length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ meter (cost of M.S. angle, C.C. blocks shall be paid separately) |
| 20 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On steel work |
| 21 | Carriage of materials by Mechanical Transport from Source to site of work. |
| 22 | Stone Agg for an average of 5 kms. |
| 23 | Sand for an average of 5 kms. |
| 24 | Bricks for an average of 25 kms. |
| 25 | Balance Work (Building). |
| 26 | Providing and fixing 12.5 cm wide 75 cm overall Precoated Colour G.S. sheet gutter with iron brackets 40x3mm size Placed 30 cm C/C, bolts, nuts and washers etc. including scafolding complete job. 0.50 mm thick |
| 27 | Providing and fixing 60 mm PVC pipes (Class B) for Rain Water Pipes including bends, elbows, clips including scaffolding all fittings and fixtures Complete job |
| 28 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately. Chaar Gul |
| 29 | Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer -in-charge (Frame work shall be paid for separately). 12mm thick commercial ply conforming to S : 1328 BWR type. |
| 30 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 31 | Providing and fixing wardrobe of required size (24\\" deep) made of 18 mm thick BWR grade plywood for carcass and shutters and 12 mm thick plywood for back panel, finished with laminate on inner surfaces and acrylic sheet finish on exposed outer surfaces, including making drawers with telescopic channels, shutters with necessary hinges, handles, locks, edge banding, screws, adhesives and all necessary fittings and fixtures of approved make, complete in all respects as per approved design and direction of Engineer in-Charge. |
| 32 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Please Enable Macros to View BoQ information |
