|
| 1 | Dismenthing & Cartage of old and used 100 KVA T/F Loading and unloading at both ends. Received back from site to central store. |
| 2 | Work of Installation of 250KV T/F In Place of 100 KVA T/F With All Accessories as per resspo norms with cartage from store to site. |
| 3 | Erection of Single pole with 8.5/11 Mtr Long. PCC Pole by digging suitable pits in hard/soft soil/ rock and its back filling including concreting and grouting of pols and fixing of all accessories . Work shall be done as per resspo specification. Grouting meterial to be provided by bidder with cartage from store to site. |
| 4 | Providing & Installation of Henely type tailess units 500 Amp 650 volt consisting of 06 Nos. brass back entry, 06 nos U-Type spring contact made of copper, brass coupling with porcelain fitted on the G.I. sheet 16 SWG with arrangement of 01 Nos neutral. The Tailess fuse unit frame made of 65x65x6mm M.S Angle/Painted with fixing of all above things. The Tailess frame on the plinth 160/250/400/500/630 KV T/F with making the connection of T/F and line side completed work all material shall be provided by the Contactor. The frame of the tailess unit is to be grouted are depth of 2 feet below the ground level & there should be a gap of 1 feet between the ground surface & the main tsiless unit.(1 Tailess Unit Means Avg. 3 Circuits at 1 T/F) |
| 5 | Fixing of 11 KV FUSE SET with cartage from store to site. |
| 6 | Fixing of Do Fuse Set with cartage from store to site. |
| 7 | Fixing of 11 KV POLYMERIC DISC INSULATOR WITH FITTING with cartage from store to site. |
| 8 | Fixing of STAY SET COMPLETE with cartage from store to site. |
| 9 | Fixing of 3 PHASE DISTRIBUSTION BOX with cartage from store to site. |
| 10 | Fixing of 11 KV POLYMERIC PIN INSULATOR WITH PIN with cartage from store to site. |
| 11 | Laying of LT AL. 1X400 SQMM XLPE CABLE with cartage from store to site. |
| 12 | Laying of LT AL. 1X240 SQMM XLPE CABLE with cartage from store to site. |
| 13 | Laying of LT AL. 1X16 SQMM XLPE CABLE with cartage from store to site. |
| 14 | Laying of LT ABC 3X120+1X95+1X16SQMM with cartage from store to site. |
| 15 | Laying of LT ABC 3X50+1X35+1+16SQMM with cartage from store to site. |
| 16 | Laying of Fixing GI Wire 6 SWG with cartage from store to site. |
| 17 | Laying and stringing of ACSR WEASEL CONDUCTOR on the pole as per RESSPO specification and as per direction of engineer in charge it includes cost of labour, T & P Carrier etc. required for proper completion of work with cartage from store to site. |
| 18 | Providing & Fixing of MS CHANNEL 100 X50MM |
| 19 | Providing & Fixing of Droper channel. 100 X50X2028 MM for Fuse Set |
| 20 | Providing & Fixing of T/F Earthing (netural & Body) Chemical |
| 21 | Providing & Cunstruction of Plinth of Transformer 2x2x1.5 MM |
| 22 | Providing & Fixing of Fencing of Transformer 4x3x3 M |
| 23 | Providing & Fixing Concreting & Grouting of Stay Set Complete. |
| 24 | Providing & Fixing of LT Crimpining LUG 120/165/240 SQMM |
| 25 | Providing & Fixing of GI Strip for Earthing |
| 26 | Providing & Fixing of Copper L-Piece 50x225x10 MM |
| 27 | Providing & Fixing of Copper L-Piece 62x225x12 MM |
| 28 | Providing & Fixing of SUSPENSION CLAMP |
| 29 | Providing & Fixing of I Hook |
| 30 | Providing & Fixing of J Hook |
| 31 | Providing & Fixing of PG Clamp, Holding Clamp, Clamp with Nut & Bolt |
| 32 | Providing & Fixing of NUT & Bolts with waser off size. |
| 33 | Providing & Fixing of DISTRIBUSTION BOX Clamp with Nut. |
| 34 | Providing & Fixing of Earthing of pole (netural & Body) |
| 35 | Binding, Laying and stringing of Stay Wire |
| 36 | Providing & Fixing of MS Angle 75X75X6 MM For T/F BASE |
| 37 | Providing & Fixing Concreting of Support |
| 38 | Providing & Fixing MS Earthing 2540x20 MM |
| 39 | Providing & Fixing Stone Pad. |
| 40 | Providing & Fixing Dead & Clamp |
| 41 | Providing & Fixing of LT PIERCING CONNECTOR 120MM Please Enable Macros to View BoQ information |
