|
| 1 | first floor finishing works |
| 2 | OD535826/2025-2026:Providing and laying vertified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS :15622, of approved make ,in all colours and shades ,laid on 20 mm thick cement mortar 1:4(1 cement :4 coarse sand),including grouting the joints with white cement and matching pigments etc complete, Size of Tile 600*600 mm. |
| 3 | OD536449/2025-2026:Providing and fixing machine moulded aluminium covering of approved pattern& design, made out of machine cut aluminium sheet and machine holed forreceiving dash fastener, over expansion joints on vertical surfaces/ ceiling floors, thefixing on plate in one row on one side of joint only shall be done with 75 mm long boltincluding providing aluminium - washers 2 mm thick 15 mm dia, at a staggered pitchof 200 mm centre to centre including drilling holes in the receiving surface andproviding expandable plastic sleeves in holes etc. complete as per drawing anddirection of Engineer -in-charge.Anodised aluminium sheet 2.5 mm thick (anodisedtransparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). |
| 4 | OD529814/2025-2026:Providing and fixing calcium silicate board 8mm tapered edge for paneling of approved quality in GI pipe frame work with necessary screw etc. complete (GI frame work paid separately). |
| 5 | OD376714/2025-2026:Providing and fixing precoatedGI trafford sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 6 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) |
| 7 | 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 8 | 50.18.9.5.2:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints compete as per direction of Engineer in Charge. 40 mm dia 6 Kgf/cm2 |
| 9 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Please Enable Macros to View BoQ information |
