|
| 1 | Boring, Providing and installing cast in situ single under reamed piles of specified diameter and length in M 20 cement concrete, excluding the cost of steel reinorcement but including the cost of boring, cement concrete, all complete. (Length of pile |
| 2 | Providing, laying, jointing & testing offollowing P.V.C. pipes with solventcement joint for 6, 8 and 10 kg/ sq.cm. pressures including testing ofjoints, cost of jointing materials etc.com plete in all respect. 110 mm dia. 6Kg/Cm2 |
| 3 | Providing and laying in positionfollowing PVC bends suitable for 6, 8and 10 Kg/Sq. cm. pressure pipes. 110 mm dia. 6Kg/Cm2 |
| 4 | Providing and laying in positionfollowing PVC Tees, suitable for 6, 8and 10 Kg/Sqcm. Pressure pipes. 100 mm dia. 6Kg/Cm2 |
| 5 | ProvidingandfixingChlorinatedPolyvinylChloride(CPVC)pipes,havingthermalstabilityforhot&coldwatersupplyincludingallCPVCplaneandbrassthreadedfittingi/cfixingthepipewithclampsat1.00mspacing.Thisincludesjointingofpipes&fittingswithonestepCPVCsolventcementandtesting of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall. 25 mm nominal outer dia .Pipes. |
| 6 | ProvidingandfixingChlorinatedPolyvinylChloride(CPVC)pipes,havingthermalstabilityforhot&coldwatersupplyincludingallCPVCplaneandbrassthreadedfittingi/cfixingthepipewithclampsat1.00mspacing.Thisincludesjointingofpipes&fittingswithonestepCPVCsolventcementandtesting of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall. 32 mm nominal outer dia .Pipes. |
| 7 | ProvidingandfixinggunmetalgatevalvewithC.I.wheelofapprovedquality (screwed end): 25 mm nominal bore |
| 8 | ProvidingandfixinggunmetalgatevalvewithC.I.wheelofapprovedquality (screwed end): 25 mm nominal bore |
| 9 | ProvidingandplacingonterraceatallfloorpolyethylenewaterstoragetankISI:12701markedwithcoverandsuitablelockingarrangementandmakingnecessaryholesforinlet,outletandoverflowpipesbutwithoutfittings and the base support for tank. |
| 10 | Structural steel work riveted, bolted or welded in built upsections, trusses and framed work, including cutting, hoisting, fixingin position and applying a priming coat of approved steel primer allcomplete: |
| 11 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/ inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of IS : 13920; IS 456 & SP : 34) etc. complete.ThermoMechanically Treated bars. (Fe 500 D or more) |
| 12 | Excavation for roadway in soil including loading andunloading in/from truck for carrying suitable cut earth toembankment site and disposing off unsuitable earth withall lifts and lead up to 1000 Meters as per Section-300 ofthe specifications. |
| 13 | Construction of granular sub-base, spreading inuniform layers with motor grader on prepared surface,mixing by Mix in Place Method at OMC and compactingwith vibratory roller of 80-100 KN Static weight to achievethe desired density, including all lifts and lead completein all respect as per Section-400 of the specifications. Grading I |
| 14 | Providing and Laying Cement Concrete Grade M-10with 40 mm graded crushed stone aggregate, spreadingthe concrete by shovels mixing shall be in mechanicalmixer, compacting by use of pin/plate/screed vibratorsincluding form work by strong steel girders fixed byspikes. |
| 15 | Providing and laying Cement Concrete grade M-20 (Nominal mix 1:1.5:3)with 20 mm graded crushed stone aggregate, mixing shall be inmechanical mixer, laying with paver compacting by use of pin, plate /screed vibrators including form work by strong steel girders fixed byspikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to5 m interval & filling it with hot applied bituminous sealant (without dowelbars). (max. thickness 20cm) |
| 16 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate. |
| 17 | Centering and shuttering including strutting, propping stretching etc. complete for and removal of form work by sheet plate or ply wood shuttering for :Lintels, beams, plinth beams, girders, bressumers and cantilevers Please Enable Macros to View BoQ information |
