|
| 1 | Earth work in excavation by manual means (Hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: |
| 2 | P/L hand-packed Stone Soling including dressing, watering,ramming and carriage of material complete Job as directed by the engineer in charge |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) crushed |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 5 | Providing and laying in position cement concrete of specified grade icluding curing but excluding the cost of centering and shuttering .All work upto plinth level with 1;2;4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases for columns |
| 7 | Brick work with common burnt clay F.P S ( non modualar) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 (1 cement :6 coarse sand) |
| 8 | Extra for brick work with common burnt clay brick/cement bricks in superstructure above plinth level upto floor five level. |
| 9 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)Powder coated aluminum (minimum thickness of powdercoated 50 microns) |
| 10 | Providing and fixing of Aluminium composite panel 4mm in partition walls,door windows etc including P/F snap beading and EPDM Rubber Gasket Complete Job. |
| 11 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm) |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 13 | 'Centering and shuttering incl. strutting , prooping etc and removal of same for Suspended floors, roofs, landings, balconies and access platforms. |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level and above using Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 15 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm |
| 16 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.100 mm |
| 17 | Providing and fixing of Hardware fittings (Alloys)as per approved samples Aluminum Annodised Tower bolts 100mm |
| 18 | Providing and fixing of Hardware fittings (Alloys)as per approved samples Aluminum Annodised Tower bolts 150mm |
| 19 | Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 20 | 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 coarse sand) |
| 21 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick |
| 22 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.In colour such as White, Ivory, Grey, Fume Red Brown |
| 23 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 24 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid. |
| 25 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steelbolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 26 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 27 | Providing and fixing 15mm nominal bore CP brass bib cock of approved quality conforming to IS : 8931 |
| 28 | Providing and fixing of CP Health Faucet of Jaquar,Kerovit or of approved quality as per directions of Engineer Incharge.Complete job |
| 29 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore |
| 30 | Providing and fixing 100% stainless steel grating of approved make and quality grade 304 on top of floor trap. The rate includes the cost of all ancillary works and material as required to complete the works. 75 mm dia |
| 31 | Providing and fixing uPVC SWR (soil, waste and vent pipes) Pipes Type B : Single Socket 110 mm |
| 32 | Providing and fixing uPVC SWR (soil, waste and vent pipes) Pipes Type B : Single Socket 75 mm |
| 33 | Providing and fixing uPVC SWR (soil, waste and vent pipes) Pipes Type B : Plain Bend 110 mm (Type B) |
| 34 | Providing and fixing uPVC SWR (soil, waste and vent pipes) Pipes Type B : Door tee 110 mm (Type B) |
| 35 | Providing and fixing uPVC SWR (soil, waste and vent pipes) Pipes Type B : Coupler/socket 110 mm (Type B) |
| 36 | Providing and fixing uPVC SWR (soil, waste and vent pipes) Pipes Type B : Reducer / Eccentric Reducer 110 to 75 mm (Type B) |
| 37 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge.External work including trenching, refilling etc.PN-16 pipe , 25mm OD(SDR-7.4) |
| 38 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. Thisincludes testing of joints complete as per direction of Engineer-in charge.Internal work Concealed fixing the pipe with clamps at1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 25mm OD(SDR-7.4) |
| 39 | Providing and fixing PPR Union 25mms or male female sockets |
| 40 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 41 | CARRIAGE OF MATERIALS, By Mechanical Transport including loading, unloading and stacking : Sand, stone aggregate below 40 mm nominal size for 30 Km Avg. lead |
| 42 | CARRIAGE OF MATERIALS, By Mechanical Transport including loading, unloading and stacking : Bricks for 30 Km Avg. lead |
| 43 | CARRIAGE OF MATERIALS, By Mechanical Transport including loading, unloading and stacking : Cement, for 5 Km Avg. lead |
| 44 | CARRIAGE OF MATERIALS, By Mechanical Transport including loading, unloading and stacking : Steel, for 5 Km Avg. lead Please Enable Macros to View BoQ information |
