|
| 1 | Site Clearance of area clearing of shrubs, vegetation, grass, bush, weed, trees and saplings n. exc. 30 cm girth complete all as specified. |
| 2 | M&L for surface excavation n.exc. (Not exceeding) 30 cm deep and averaging 15 cm deep and getting out in hard / dense soil. |
| 3 | M & L for rough excavation in loose/soft soil not exceeding 1.5 m deep and getting out complete all as specified and directed. |
| 4 | Removing excavated material exc. 500 m but n. exc. 1000m and depositing where directed complete all as specified and directed. |
| 5 | Forming embankment incl raising earth spreading n exc 30 cm th , levelling watering and ramming finishing to required size shapes etc n exc 1.5 m highh from base complete all as specified & directed |
| 6 | Excavating in trenches n exc 1.5 m wide and n exc 1.5m in depth, for foundation, etc and getting out in soft/loose soil complete all as specified & directed. |
| 7 | Excavating in post hole each n exc. 0.50 cum , in soft/loose getting out,returning, filling in and ramming earth or broken rubble mixed with earth around, in layer not exc. 25 cm, watering, and removing surplush soil to a distance n exc. 50 m and making good surface complete all as specified and directed by Engr-In-Charge. Note : Necessary dewatering of water shall be included in the unit rate of item. |
| 8 | M&L for hard core of broken stone or boulders of guage n.exc 63mm deposited spread and levelled in layer n.exc 15cm thick watered and well rammed to true surfaces complete all as specified and directed by Engr-In-Charge. |
| 9 | M & L for cement concrete 1:3:6 type C-2 (40 graded stone aggregate) as in post holes, foundation ,filling and mass concrete complete all as specified and directed by Engr-In-Charge. |
| 10 | M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, choukhat for door and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by engr -in-charge |
| 11 | M&L for applying two coat synthetic enamel paints over a coat or red oxide zinc chrome primer on new steel surfaces including preparation of new painted steel surfaces complete all as specified & directed. |
| 12 | M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation ,filling and mass concrete complete all as specified & directed . |
| 13 | M&L for 100 mm thick PCC 1:4:8 type D-2 using 40mm graded aggregate as in sub-base of surface layer complete all as specified & directed. |
| 14 | M & L for 100mm thick Cement concrete type B- 2, 1:2:4 (20mm graded aggregate) complete as in floor/hardstanding all as specified and directed. |
| 15 | M & L for brick work with fly ash brick (Old size) straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified and dircted by engr -in-charge. |
| 16 | M&L for 12mm thick cement plasters in CM 1:6 on concrete or brick wall surfaces complete all as specified. |
| 17 | M&L for preparation of newely plastered surface of wall and applying two coats of cement base paint including one coat of primer complete all as specified and as directed. |
| 18 | Returning , filling in, incl spreading leveling, watering and well ramming in layers n.exc 25cm in soil complete all as specified & directed. |
| 19 | Removing excavated material to a distance n.exc 50m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified. |
| 20 | M&L for PCC 1:3:6 type C-1 ( 20 mm graded aggregate) as in plinth protection , 75 mm thick complete all as specified and directed |
| 21 | Supply, laid, fix and testing galvanised steel water tubing, ISI marked, medium grade galvanized with and including all tube fittings ISI marked and fixtures such as tees, elbows, diminishing pieces etc. complete fixed to wall and ceiling or laid in floors of sizes:- |
| 22 | (a) 15 mm |
| 23 | (b) 20mm |
| 24 | (b) 25mm |
| 25 | Supply and fix 20 mm bore Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipes and fixed complete all as specifed and directed. |
| 26 | Supply and fix 25 mm bore Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipes and fixed complete all as specifed and directed. |
| 27 | M&L for hoisting & fixing rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) in position complete all as specified and directed by engr-in charge of following capacity |
| 28 | (a) 500 Ltrs capacity |
| 29 | (b) 2000 Ltrs capacity |
| 30 | (c) 5000 Ltrs capacity |
| 31 | S&F 20mm bore Ball brass valve high pressure with polythene float and fly nut complete screened for Iron pipe or brass ferrule and fixed complete all as specified and directed by engr-in charge. |
| 32 | S&F 25mm bore Ball brass valve high pressure with polythene float and fly nut complete screened for Iron pipe or brass ferrule and fixed complete all as specified and directed by engr-in charge. |
| 33 | M&L for PVC (SWR ) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed by engr-in charge. |
| 34 | S&F PVC (SWR) pipes single socketed,in any length with rubber ring joints fixed to walls.a) 110mm dia of pipe complete all as specified and directed by engr-in charge. |
| 35 | a) 110mm dia bore of pipe |
| 36 | b) 75mm dia bore of pipe |
| 37 | M&L for Portable Container Building with attached Toilet (20 feet X10feet) having 01 EWC with flushing cistern, 01 no Wash hand basin and 01 no Urinal with all necessary bathroom fittings complete. All accessories shall be of size & pattern/design as directed by Engr-in-Charge/GE and all as per notes given below under item No 38 . |
| 38 | M&L for Portable Container Building (20feet X10feet ) having 01 No Sink and 01 No Utensil Stand, necessary plumbing arrangements and granite shelf complete. All accessories shall be of size & pattern/design as directed by Engr-in-Charge/GE and all as per notes given below under item No 38 . |
| 39 | M&L for Portable Container Building (20feet X10feet) having upto 03 work stations complete. All accessories shall be of size & pattern/design as directed by Engr-in-Charge/GE and all as per notes given below under item No 38 . |
| 40 | M&L for Portable Container Building (20feet X10feet ) complete. All accessories shall be of size & pattern/design as directed by Engr-in-Charge/GE and all as per notes given below under item No 38 . |
| 41 | M&L for Portable Container Building (20feet X10feet) with flame proof lighting and flame proof exhaust fan complete. All accessories shall be of size & pattern/design as directed by Engr-in-Charge/GE and all as per notes given below under item No 38 . |
| 42 | M&L for Portable Container Building (40feet X10feet) having upto 03 Nos work stations complete. All accessories shall be of size & pattern/design as directed by Engr-in-Charge/GE and all as per notes given below under item No 38 . |
| 43 | M&L for Portable Container Building (40feet X10feet) complete. All accessories shall be of size & pattern/design as directed by Engr-in-Charge/GE and all as per notes given below under item No 38 . |
| 44 | M&L for Portable Container Toilet (20feetX10feet) having 02 nos EWC with flushing cistern, 03 nos Wash hand basin and 03 nos Urinal with all necessary bathroom fittings like Flushing cistern, PVC Connection, Taps, valve etc complete. All accessories shall be of size & pattern/design as directed by Engr-in-Charge/GE and all as per notes given below under item No 38 . |
| 45 | M&L for Portable Container Toilet (20feet X10feet) having 02 nos EWC with flushing cistern, 02 nos Wash hand basin and 02 nos Urinal with all necessary bathroom fittings like Flushing cistern, PVC Connection, Taps, valve etc complete. All accessories shall be of size & pattern/design as directed by Engr-in-Charge/GE and all as per notes given below under item No 38 . |
| 46 | M&L for Portable Container Toilet (20feet X10feet) having 01 no EWC with flushing cistern, 01 no Wash hand basin and 01 no Urinal with all necessary bathroom fittings like Flushing cistern, PVC Connection, Taps, valve etc complete. All accessories shall be of size & pattern/design as directed by Engr-in-Charge/GE and all as per notes given below under item No 38 . |
| 47 | Note for Item 29 to 38 All above mentioned Container Building shall be having 02 nos powder coated aluminium windows with grill outside and 01 no Main Door in 20feet x 10feet container and 04 nos powder coated aluminium windows with grill outside and 02 nos Main Door in 40feet x 10feet container,partitions with doors and opening (as required), ventilators in each toilet, Sufficient nos of cabin fans and LED lights, modular switch sockets, Provision for split AC and projection system (if required), 03 Nos LAN ports to AFNET ethernet cable (if required) The Other Specification Include:-(a) Bottom Frame:- 100mm x50mm \\"C\\" Channel.(b) Top frame :- 50mmx50mm MS Sq pipe.(c) STiffner Bottom:- 40x65mm MS Sq pipe.(d) Stiffner Top:- 40x20mm MS Sq pipe.(e) Side post :- 65mmx65mm MS Sq pipe.(f) Paneling outside:- Specifically corrugated GI sheet with 20 gauge thickness properly welded.(g) Internal wall Paneling:- 8mm Hile & Pine Pre-Laminated MDF board.(h) Roof outside:- Specially GI Sheet 20 Guage thick properly sloped and water tight.(j) False ceiling 8mm Hile and Pine pre-laminated MDF Board.(k) Bottom Flooring 18mm cement fibre board with Vinly carpet over it.(l) Aluminium window:- Aluminium sliding window with safety grill. |
| 48 | (m) ACP sheet insulated with for locking arrangement, Hold draft & Handels.(n) Insulation:- Glass wool density of 16kg/ cum TB glass wool inslutaion (Side wall 25mm).(o) Wiring:- all wiring shall be concealed type and shall be of PVC insulated copper wire(FRLSH).(p) Electrical fittings:- All electrical fittings in the portable cabin shall be capacity of 220-240 V , AC.(q) Earthing:- Earthing point shall be provided for safety.(r) Outside painting:- Phosphating the cabin and painting with one coat of primer with 2 coat of paint.(s) Plumbing:- ISI Marked UPVC pipe with internal plumbing.(t) Legs 6 inch height, four legs at all four corners.(u) Hooks:- Specifically formed hooks for easy lifting andf shifting.All other details, size, patterns, shall be as directed by Engr-in-Charge/GE. |
| 49 | Electrical Systems and Wiring (a) All wiring shall be concealed type & shall be of copper wire (FRLSH). All electrical fitting in the portable cabin shall be 220-240 V, Fan, Switches, Socket, Telephone, Air Conditioners Point (MCB). All Type of Window Air Conditioning Systems as desired upon can be installed. Earthing point shall be provided for safety. |
| 50 | S & F structural Mild steel tubes hot finished tubes work in built up tubular (round, square or rectangular hollow tubes etc.) trusses, of semi circle shape upto 8 mtr height including post, purling ,rafter ,post etc., including cutting, hoisting,wlding ,grinding, fixing in position , welding and bolted with special shaped washers etc. using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st-240 complete all as specified and as directed by Engineer In Charge. |
| 51 | S&F chequred or plain MS plates, channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment to grade Fe-410W E-250 quality. |
| 52 | S & F Prepainted galvalume aluminium zink coating GI based corrugated steel sheet 0.5 mm thick (coloured as approved by Engr-in- charge ) having tensile strength of 550 Mpa as in roof coverig/ clading to wall ,fixed with self taping screws complete all as specified and directed |
| 53 | M&L for two coats of synthetic enamal paint over a coat of red oxide zinc chrome primer on steel surfaces complete all as directed. |
| 54 | All as per item No 06 above but for depth exe. 1.5 mtr and n.exe. 3.0 mtr complete |
| 55 | M& L for RCC M-25 grade (Design mix) (20mm graded stone aggregate) for rafts, footing foundation,plinth beams,bases of column etc complete all as specified and directed. |
| 56 | M & L for M-25 (20 mm graded aggregates) as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 57 | Removing excavated soil to a distance exc. 50 m & n .exc. 100 m distance depositing where directed at a level n.exc 1.50 mtr above the starting point. |
| 58 | M&L for formwork to sides of concrete foundation, footings, bases of columns and plinth beams and simillar work vertical or to batter with rough finished flat surface all as specified and as directed. |
| 59 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished( square/ rectangular) complete all as specified and as directed. |
| 60 | M& L for TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required,including cranking and binding with mild steel wire (anneled) not less than 0.9 mm dia as in main bar complete all as specified and as directed. |
| 61 | All as per item No 49 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders. |
| 62 | S & F mild steel screw bolts( machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, dia of neck 16 to 20 mm but length of bolt exc 15 cm but not exc 22.50 cm long complete all as specified and as directed. |
| 63 | S & F for MS work flat iron, MS plates as FE-290 (Grade-E-165) quality-A in brackets, cleats fasteners,wind ties,support bases for post etc with rivet bolted or welded attachment complete all as specified and as directed. |
| 64 | S & F Roof trusses (framed), trussed, purlins, crane gantries, rails andfastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. |
| 65 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.80mm BMT thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 66 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.80mm BMT thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 67 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor (FRLSH) 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :- |
| 68 | (a) One light point controlled by one, one way switch 5 Amps. |
| 69 | (b) One exhaust fan point controlled by one, one way switch 5 Amps. |
| 70 | (c) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 71 | (d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 72 | (e) One bell point controlled by one, bell switch 5 Amps. |
| 73 | All as per item No 56 here in before but using 2.5 sq mm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm PVC insulated copper conductor FRLSH cable as earth continuity conductor along with wiring and connecting to the common eath dolly complete specified and directed. |
| 74 | All as per item No 56 here in before but using 4.0 sq mm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 4.0 sq mm PVC insulated copper conductor FRLSH cable as earth continuity conductor along with wiring and connecting to the common eath dolly complete specified and directed. (for AC Point) |
| 75 | S & F Modular switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified. |
| 76 | S & F Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified. |
| 77 | S & F Modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 78 | S & F Modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 79 | S & F for Bell push modular 6 Amps single module complete all as specified. |
| 80 | S & F Ceiling rose, surface Bakelite suitable ISI marked for batten fitting complete all as specified |
| 81 | S & F Bell Electric Bul- Bul music type suitable for operation on 230 Volt 50 Hz, AC supply complete all as specified and as directed |
| 82 | S & F Modular type three pin socket 3 pin 16/20 Amps with plug top On/ Off switch and controlled by MCB SP 20 Amps suitable for 230 volt 50 Hz AC supply complete all as specified and as directed |
| 83 | S & F ceiling fan, 230 Volts, 1200 mm sweep with air delivary 210 CFM, service value of the fan shall be greater than 6.1 (5 star rated) as per BIS with blades, down rod & other necessary accessories with brushless direct current motor (BLDC) with remote system and electrical connections from ceiling rose to fan teriminal complete all as specified and directed. |
| 84 | S & F energy efficient exhaust fan of 225 mm sweep made of metal body complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing wall for fan base compelte all as specified and directed. |
| 85 | S & F wall mounted LED box type tube light fitting 4' x 20 watts industrial commercial interior batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 86 | S & F LED tube light fitting with aluminium housing 2 feet x 10 watts mirror type with high out put diffuser, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting with warranty option of 5 years from date of installationcomplete all as specified and as directed. |
| 87 | S & F Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. |
| 88 | S & F sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall complete all as specified and as directed. |
| 89 | S & F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall complete all as specified and as directed. |
| 90 | S & F MCB TPN of capacity 40 to 100 Amps, 415 Volts, breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 91 | S & F MCB SPN of capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 92 | S & F MCB Single pole rated capacity 5 to 32 Amps, 240 Volts, breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 93 | M & L for maintenance free Chemical earthing of technology with copper bonded steel rod 3 mtr long 25.0 mm dia with 250-micron Copper bonded coating and UL listed. There should be terminal for connection of 150 x 50 x 6 mm with 4 holes of 12 mm dia along with 2 bags of 25 Kgs each of earth enhancing compound. The chemical compound should be tested and certified by any NABL accredited laboratory with 95 percent carbon content. The testing laboratory should be an ISO 9001 and 14001 certified. The earth enhancing compound should be IEC 62321. The ph value of compound should be 7-8. Electrode should be duly tested and certified by CPRI, Govt of India for a min short circuit current of 25 kA rms for 1 Sec. including necessary boring of suitable dia upto required depth in any type of soil for inserting copper rod and filling of chemicals and Poly plastic pit cover of material- polymer body & cover dimensions- 308 mm (L) x 308 mm (W) x 214 mm (H) bearing capacity 7.5 Ton approved from NABL approved Lab complete all as specified and as directed. |
| 94 | Note :- (i) Earthing is to be done infront of the Engr-in-Charge (ii) Test Results of earthing to be submitted by the contractor for all earthings.(iii) The Contractor shall have to give written guarantee for maintenance earth resistance of less than 1.0 Ohm for the period of 10 (ten) years after certified date of completion and shall be deposited 2000/- per earthing as security deposit for a period of Ten (10) Years.(iv) Failing to maintain resistance of earthing less than 01.0 ohm , new earthing to be provided by the contractor with out any extra cost.(v) Necessary earth work, excavation shall be carried out in any type of soil strata, retuning, filling in and making good surronding area complete. |
| 95 | M & L for GI earth continuity conductor fixed to wall /floor/drawn in holes /conduits or any any position as directed of size 4.0 mm dia including necessary GI Protection light grade pipe 15 mm bore and jointing strips with nuts bolts and brazing/welding at joints complete all as specified and as directed. |
| 96 | M & L for flame proof point wiring complete with 1100 Volts grade PVC insulated unsheathed copper conductor cable (FRLSH) multistranded of size 1.5 Sqm single core with and including ERW steel conduit, ISI marked surface mounted of suitable size with all accessories and continuous earth wire of size 1.5 sqmm PVC copper conductor cable (FRLSH) connected to common earth dully complete all as specified and directed for the following :- Note :- (i) Flame proof accessories such as Junction box, unions and bends shall be measured and paid seperately. |
| 97 | (a) One light point controlled by one MCB SPN. |
| 98 | (b) One exhaust fan point controlled by one MCB SPN. |
| 99 | S & F Flame proof brass unions suitable for 20 mm ERW conduit, duly certified by CMRI Dhanbad complete all as specified.. |
| 100 | S & F Flame proof brass bends suitable for 20 mm ERW conduit, duly certified by CMRI Dhanbad complete all as specified. |
| 101 | S & F Flame proof closing plugs suitable for ERW 20 mm dia conduit duly certified by CMRI Dhanbad complete all as specified. |
| 102 | S&F flame proof /Weatherproof 4 way junction box with 4 Nos terminal, 100 mm dia for looping in and looping out connections, duly certified by CMRI Dhanbad complete all as directed |
| 103 | S & F Flame proof/ weather proof LED tube light fitting 4 feet x 20 watt working with single phase, 240 Volts, 50 Hz protection with IP-65, duly certified by CMRI Dhanbad including flame proof flexible metallic conduit with necesary electrical connections complete all as specified and as directed. |
| 104 | S & F switch flame proof rotary type with termination box in in LM6 material, includimg provision of MCB SPN 5-32 Amps, 250 Volts duly certified by CMRI Dhanbad complete all as specified and directed |
| 105 | Supply and fix flame proof/weather proof exhaust fan of 300 mm (12\\") sweep with 0.25HP motor, 230 volts single phase, 50 Hz, with provn of louvers and bolts nuts and washers including flame proof flexible metallic conduit with necesary electrical connections complete all as specified and as directed. |
| 106 | S&F Flame proof sheet steel metal enclosure of size 300 x 300 x190 mm, CMRI certified distribution box ,6 Way 240 Volts with and including MCB SP 2 Pole, 32 Amps-1 No, Outgoing MCB SPN, 240 Volts 5-32 Amps- 2 Nos complete with internal Bus Bar & wiring upto terminal, duly certified by CMRI Dhanbad complete all as directed |
| 107 | Supply and install hi wall Split type AC unit indoor/ outdoor complete with cordless remote control unit and with in built Heating and Cooling arrangements and Digital Inverter twin rotary of capacity 1.50 TR all including moutning bracket for outdoor unit, suitable size of copper piping from indoor to outdoor unit, and pressure testing with nitrogen and freon gas vacumising the system and charging the Non CFC refrigerent and testing the complete system for smooth functioning of split AC up to satisfactioning, 5 star rating, working with Non CFC refrigerent and provn of suitable size electrical connection from indoor to outdoor unit including necessary cutting on wall for copper piping and make good with putty/ cement and painting etc complete all as specified and as directed |
| 108 | S & F voltage stablizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 170 volts to 250 volts with out put voltage stablized at 230 volts with accuracy of + 2.5% and capacity 5 KVA suitable for A/C complete all as specified and as directed |
| 109 | M & L for framed brakets of angle iron, flat iron, made to shape required including welding etc, as frame work for basement for supporting to AC out door unit confirming to Fe-410 or Fe-310-0 including MS sheet base complete all as specified and as directed. |
| 110 | Supply and fixing self contained drinking water cooler fully stainless steel working with non CFC refrigerent of above 3 star rating suitable for operation on 230 volts 50 cycles AC supply having approx storage and nominal cooling capacity 40/80 Ltrs (approx storage capacity 80 litre and normal cooling capacity of 40 litre per hour) and including making of PCC platform of suitable size as directed for fixing of water cooler complete all as specified and directed by Engr-in-Charge. |
| 111 | Supply and fix for Refrigerator, electric driven (single phase) of capacity 310 litre BEE 5 star rated working with non CFC refrigerent complete all as specified and as directed |
| 112 | S & F Voltage stablizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 170 volts to 250 volts with out put voltage stablized at 230 volts with accuracy of + 2.5% and capacity 1.0 KVA suitable for A/C complete all as specified and as directed. |
| 113 | S & F Voltage stablizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 170 volts to 250 volts with out put voltage stablized at 230 volts with accuracy of + 2.5% and capacity 2.0 KVA suitable for A/C complete all as specified and as directed |
| 114 | Excavation in trenches by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) for laying of DI/ GI pipe line, etc in getting out any type soil and levelling of bottom surface to required level including getting out and disposal of excavated earth lead upto 50 Mtr and lift upto 1.5 Mtr complete all as specified and as directed |
| 115 | S & F for Cable route indicator / Marker made out of PCC Block in cement concrete 1:3:6 (20 mm graded aggregrate) of size 900 x 300x 100 mm thick with \\"DANGER/ LT 433 VOLTS CABLE /MES or DANGER/ MES\\" embossing on cable route Indicator / Marker including painting as per approved colour and buried in ground 45 Cms including necessary earth work (as required/ ordered at site) complete all as specified and as directed. |
| 116 | Supply and lay for double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to ISI 14930 (Part I and II) for protection of underground cables of following size nominal outer dia & nominal inner dia with all fittings laid in trenches / road/ nallah or fixed along wall for cable protectioncomplete all as specified and as directed. |
| 117 | (a) Nominal outer dia 63 mm & nominal inner dia 50 mm |
| 118 | (b) Nominal outer dia 90 mm & nominal inner dia 76 mm |
| 119 | (c) Nominal outer dia 120 mm & nominal inner dia 103.5 mm |
| 120 | Supply, laying & testing for cable LT XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade including necessary double compression brass cable glands and testing the cable before & after laying complete all as specified and as directed of following sizes :- |
| 121 | (a) 3.5 core x 120 Sqmm |
| 122 | (b) 3.5 core x 70 Sqmm |
| 123 | (c) 3.5 core x 50 Sqmm |
| 124 | (d) 4 core x 10 Sqmm |
| 125 | (e) 2 core x 10 Sqmm |
| 126 | Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate with and including the following accessories:- (for Main (DG) LT Panel) :- |
| 127 | INCOMMING:- (a) Copper strip busbar of 320 amps rated capacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends - 04 Nos(b) MCCB 160 Amps with rotary handle, adjustable thermal magnetic release type, 4 pole, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader link- 01 No (Incoming) (c) LED Neon indicator lamp (RYB) with holder and fuse holder 230/250 volts, AC -01 set (set of three) (d) Digital Multifunctional meter, flush mounting type with CT’s of ratio 630/5 and selector switch – 01 set. |
| 128 | OUT GOING:- (a) MCCB 80 Amps with rotary handle, adjustable thermal magnetic release type, 4 pole, 415 Volts, Ics = 100% Icu, 18 KA breaking capacity including all fixing accessories with both ends spreader link- 01 No (b) MCCB 63 Amps with rotary handle, adjustable thermal magnetic release type, 4 pole, 415 Volts, Ics = 100% Icu, 18 KA breaking capacity including all fixing accessories with both ends spreader links- 02 Nos (c) MCCB 16 Amps with rotary handle, adjustable thermal magnetic release type, 4 pole, 415 Volts, Ics = 100% Icu, 18 KA breaking capacity including all fixing accessories with both ends spreader links- 06 Nos (Bldg load & spare) (d) MCB SPN 5-32 Amps with breaking capacity 10 KA - 02 Nos (Bldg load & spare)(e) Multifunctional Digial type timer Switch (Astro type having longitude and latitude of Indian cities memory) 240 volts AC Single Phase - 01 No(f) Power contractor 4 Pole, 32 Amps, 415 Volts, 50 Hz - 01 No (g) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150mm , white with letters , figures and conventional skull and bones in signal red and fixed with nuts and bolts on door / shutter of LT Panel -01 No. |
| 129 | Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate and including the following accessories:- |
| 130 | INCOMMING:- (a) Copper strip busbar of 160 amps rated capaacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends - 04 Nos(b) MCCB 80 Amps with rotary handle, adjustable thermal magnetic release type, 4 pole, 415 Volts, Ics = 100% Icu, 35 KA breaking capacity including all fixing accessories with both ends spreader link- 01 No (Incoming) (c) LED Neon indicator lamp (RYB) with holder and fuse holder 230/250 volts, AC -01 set (set of three) (d) Digital Multifunctional meter, flush mounting type with CT’s of ratio 630/5 and selector switch – 01 set. |
| 131 | OUT GOING:- (a) MCCB 16 Amps with rotary handle, adjustable thermal magnetic release type, 4 pole, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links- 07 Nos (Bldg load & spare) (b) MCB SPN 5-32 Amps with breaking capacity 10 KA - 02 Nos (Bldg load & spare)(c) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150mm , white with letters , figures and conventional skull and bones in signal red and fixed with nuts and bolts on door / shutter of LT Panel -01 No. |
| 132 | Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate and including the following accessories:- |
| 133 | INCOMMING:- (a) Copper strip busbar of 120 amps rated capaacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends - 04 Nos(b) MCCB 63 Amps with rotary handle, adjustable thermal magnetic release type, 4 pole, 415 Volts, Ics = 100% Icu, 35 KA breaking capacity including all fixing accessories with both ends spreader link- 01 No (Incoming) (c) LED Neon indicator lamp (RYB) with holder and fuse holder 230/250 volts, AC -01 set (set of three) (d) Digital Multifunctional meter, flush mounting type with CT’s of ratio 63/5 and selector switch – 01 set. |
| 134 | OUT GOING:- (a) MCCB 16 Amps with rotary handle, adjustable thermal magnetic release type, 4 pole, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links- 04 Nos (Bldg load & spare) (b) MCB SPN 5-32 Amps with breaking capacity 10 KA - 04 Nos (Bldg load & spare) (c) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150mm , white with letters , figures and conventional skull and bones in signal red and fixed with nuts and bolts on door / shutter of LT Panel -01 No. Please Enable Macros to View BoQ information |
| 135 | OUT GOING:- (a) MCCB 16 Amps with rotary handle, adjustable thermal magnetic release type, 4 pole, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links- 04 Nos (Bldg load & spare) (b) MCB SPN 5-32 Amps with breaking capacity 10 KA - 04 Nos (Bldg load & spare) (c) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150mm , white with letters , figures and conventional skull and bones in signal red and fixed with nuts and bolts on door / shutter of LT Panel -01 No. Please Enable Macros to View BoQ information |
