|
| 1 | 1) Construction Anganwadi Building @ Valakkapattu H/O C.K.Hills Vadakkunadu |
| 2 | Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification. |
| 3 | Supplying and filling in foundation, basement filling M. Sand in layers of not more than 15cm thick well watered, rammed and consoidated etc. complete complying standard speecifications |
| 4 | Collection and supply of 40mm metal and filling in to the basement including cost and conveyance to the site and all labour charges for filling as per standard speecifications |
| 5 | Collection and supply of 20mm metal and filling in to the basement including cost and conveyance to the site and all labour charges for filling as per standard speecifications |
| 6 | Flooring Concrete 1:4:8 (One cement, Four sand and Eight hard broken stone) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers. |
| 7 | Brick work in cement mortar 1:5 (One cement and five sand) using country bricks ground moulded of size 8 3/4\\" x4 1/4\\" x2 1/4\\"cm. For the following including curing,etc., complete complying with standard specification |
| 8 | Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid). |
| 9 | RCC roof slab, lintel, beam |
| 10 | Sides |
| 11 | Supplying fabricating and placing in position mild steel or nibbled for steel for all reinforced cement concrete works as per the desing given including cost of steel and binding wire in all floors etc. complete complying with standard specification (MS rods or RTS bars will be supplied department sally at section stores and cost will be recovered at issue rate). The binding wire shall be supplied by the Contractor. |
| 12 | Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete |
| 13 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three P.Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers |
| 14 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty should be got approved by the Executive Engineer before use on work. (Based on SoR 2023-24) Wall putty Powder: (10 sqm/10x20 kg= 20Kg) |
| 15 | Plastering with CM 1:5, 12mm thick. including curing etc., complete complying with standard specifications and as directed by the departmental officers. |
| 16 | Supply and fixing of INDIYAN Type Baby Water closet including all charges etc., complete |
| 17 | Supply and fixing of Europeion Water closet including all charges etc., complete |
| 18 | Fabrication and supply of mild steel Door of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete. |
| 19 | Supply cost of steel Door of size 0.90x 2.40 m including all charges etc, complete, complying with standard specification. |
| 20 | Supplying cost of steel Door of size 0.75m x 1.00 m including all charges etc, complete, complying with standard specification. |
| 21 | Fabrication and supply of mild steel window of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete |
| 22 | Towards the cost of Supplying & cost of supply of RCC Jollies of size 0.45 x 0.45 m |
| 23 | Towards the Cost of Labour charges for steel doors and Windows etc, complete, complying with standard specification. |
| 24 | Steel Door |
| 25 | Steel Window & Ventilator |
| 26 | Supply and fixing Cuddapah slab of 20/30mm thick including labour charges etc complete -1 sq.m |
| 27 | Weathering Course Brick jelly lime concrete using 20mm brick jelly with slacked lime in the ratio of 32:12.5 including cost and conveyance of all materials to site and all labour charges for mixing , laying ,and finishing etc complete |
| 28 | Finished with one course of pressed tiles of size 23x23x2cm with cement mortar 1:3 mix and pointed with the same oiled mortar including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm |
| 29 | Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 30 | Paving the floor with best quality Pre-polished Concrete anti-skid step Tiles of 20mm cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the (White cement mixed with colouring pigment) neatly and fixed in position so as to make it perfectly smooth and shining to the alignment etc., complete complying with standard specifications and as directed by the departmental officers. |
| 31 | Dadooing walls with colour designed Glazed tiles of sizes 300mm X200mm X 6mm size of approved make and quality and colour lSet in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed. |
| 32 | Distembering two coats oil bound distember over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete ( Inner wall ) |
| 33 | Plastic Emulsion painting two coats over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete ( outer wall ) |
| 34 | Painting two coats over new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with best approved best quality of synthetic enamel paint of approved colour over the existing priming coat etc., complete complying with standard specifications and as directed by the departmental officers. |
| 35 | Supplying and fixing P.V.C rainwater down fall pipe of 110mm dia with necessary shoes, bends,& clamps etc., |
| 36 | 1.B) ELECTRIC WORKS |
| 37 | Wiring with 2x1.5 sq.mm.PVC insulated SC unsheathed FRLS copper conductor of1100V grade insuitable PVC rigid pipe concealed in wallandceilingwith PVC accessoires in flush with wall with 3mm thick hylum sheet cover withTW switch box and 5AFT switch and making good of the concealed portion with suitable colour for PVC concealed light ( 6 points per coil) (for rooms like bath, toilet & pumproom, etc.) SD 26 |
| 38 | GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column \\"BB\\" for all works in this package}(Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD) Please Enable Macros to View BoQ information |
