|
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness.(below or above ground level) Complete all as specified and directed. |
| 2 | Demolition of cement concrete (unreinforced) in ground floors and pavings exceeding 15 cm thickness.( above ground level) Complete all as specified and directed. |
| 3 | M & L for hard core 100 mm thick of gauge not exc. 63mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed. |
| 4 | M&L for 100 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in flooring, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed |
| 5 | M&L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in flooring complete all as specified and directed |
| 6 | M&L for finishing surface of concrete roads ,pavemants by brooming |
| 7 | M&L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing com pound, Grade ‘A’ in 150 mm thick concrete slab. |
| 8 | M&L for Forming Construction joint30mm deep x 10mm wide filledwith Grade A sealing compound |
| 9 | Earth work excavation in trenches n exc 1.5 m wide and 1.50mtr depth and getting out in hard/dense soil |
| 10 | M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation complete all as directed by Engr-in-charge. |
| 11 | M&L Precast cement concrete 1:3:6 type C1 (using 20 mm graded stone agg) as in block masonry with solid blocks exc 10 cm in width and set in cement mortar 1:6, complete all as specified and directed. |
| 12 | Returning filling in including spreading leveling watering and well ramming in layers n.exc 25cm thick complete all as specified & directed by Engr-in-charge. |
| 13 | Removing excavated material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point |
| 14 | Hand packing of broken stone ( any thickness) at back of the retaining wall etc and raising and lowering to required level complete all as specified and directed. |
| 15 | S&F in repair PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints, fixed on walls or floors complete all as specified and as directed |
| 16 | M&L for rendering 15 mm thick readymade plaster on inner/outer walls with READIPLAST by adding 17-19% of potable water by weight of material, it is recommended to be applied in multiple layers. Ready mix plaster shall complies with IS 1661-1972, IS 2250-1965, IS 2402-1963 and confirms the Compressive strength @ 28 days- 10-12 Mpa/Bulk density-1500-1600 kg/cum. |
| 17 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire, complete all as specified & directed by Engr-in-charge |
| 18 | Supply only chain link MS galvanised fencing, any size or type complete all as specified and directed by Engr-in-charge. NOTE :- Fixing included under item No. 26 above. |
| 19 | S & F in repair, Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) |
| 20 | S & F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified. |
| 21 | S & F in repair, mild steel screw bolts, 5 to 10mm dia , machine made, with hexagonal or square headsat one end and screwed the other, each screwed end to be fitted with washer, lenth of bolt exc 5 cm but not exc 10 cm long |
| 22 | M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer. |
| 23 | M & L Mild steel Round bars Fe-410-W (Gde- E-250) quality-A or Fe 290 (Gde -E-165) of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified. |
| 24 | M & L for sand filing in treances for providing sand cushion for protection of UG cable complete all as specified and directed. |
| 25 | Supply and laying of sub class B bricks locally available alying perpendicular of UG cable complete all as specified and directed. |
| 26 | M & L Pipe 80 mm bore steel water tubijng medium grade galvanised with all fitting and laid in trenches complete all as specified and directed by Engr-in-Charge. |
| 27 | S & L Submersible cable 6 Sqmm 3 core, Flat with stranded copper conductor, PVC insulated and PVC sheathed 1100 Volts grade, Complete all as specified and as directed. |
| 28 | S&F Cast Iron sluice valve PN 1.6 (Flanged) with Hand wheeel operated, Non- Rising Stainless Steel Stem, Bronze body seat ring. flanged ends to IS 1538, shell test pressure- 1.5 mpa (Hyd) Seat test pressure - 1.0 Mpa size 80 mm dia incl necessary nuts, bolts, washer and gasket complete all as specified and directed by Engr-in-Charge. Make : ZOLOTO VALVES or Equivalent |
| 29 | Supply, install, testing and commissioning of submersible pumping set of 3 HP capacity electrically driven with supply voltage of 415 Volts with 3000 RPM at 20 minimum mtrs head of outlet of suitable size including splriing loaded SS suction straniner and connected with coloumn pipe complete all as slpecified and directed.Make : Crompton, Jindal, Kirloskar or equivalent.NOTE : Column pipe of 80mm bore shall be connected with submersible pump without any extra cost to the contractor |
| 30 | S&F Three phase submersible pump DOL Starter 3 HP 12 Amp, S3PMOC12l6.0A6 , 415volts 50 Hz complete all as specified and directed.Make: HPL, L & T, ABB or equivalent. |
| 31 | Supply, laying, jointing and commissioning LT XLPE 1100 volts 25sqmm 4core grade heavy duty under ground cable PVC insulated,strandred aluminium conductor served with inner sheathing of PVC tape, armoured with GI steel or tape and over all PVC sheathing laid in trenches, floor through pipes, in duct on pole and roads etc. complete all as specified and directed. |
| 32 | Surface excavation not exc. 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil. |
| 33 | Hard core of gauge not exc 63mm deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface of 100mm thick with broken/stone/boulers. |
| 34 | M&L for 100 mm thick plan cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in hardstanding,path, flooring surface finished even & smooth using extra cement complete all as specified & directed by Engr-in-charge. |
| 35 | Excavation in trenches n.exc 1.5m wide and n.exc 1.50m deep and getting out avg soil. |
| 36 | M&L for rendering 15 mm thick on brick or concrete surface of walls in cement mortar 1:4 finished even & smooth without extra cement including mixing only water proofing compound as per manufacturer instruction on external wall complete. |
| 37 | M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 38 | S & F Steel water tubing medium grade galvanised with all GI fittings (such as bend,elbows,tees, connections, short pieces, back, nuts, unions, caps & plugs etc) laid in trenches or fixed on walls or on open surfaces complete all as specified and directed of the size 20 mm(3/4\\") bore. |
| 39 | S & F gun metal, globe or gate valves ISI marked class-I, with iron wheel head, screwed both ends, for iron pipe complete all as specified and directed of the size 20 mm (3/4\\") bore ( Nominal bore) |
| 40 | M&L for cutting existing steel tubing of size 40 mm - 50 mm for alterations or additions alongwith insertion of GI Tee of suitable size and connection material. Please Enable Macros to View BoQ information |
