|
| 1 | Taking down carefully copper / aluminum point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, lamp holders, bracket, light fittings, bulk head fittings, tube light fittings etc. and making good disturbed surfaces of walls, floors etc as per existing complete all as specified and directed. |
| 2 | S & F point wiring for one light point / fan point / bell point / 5 Ampere socket outlet point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core multi-stranded) copper conductor cable (FRLSH) drawn into and including PVC casing capping/ PVC conduit pipe of suitable size with its all necessary fittings and accessories on wooden / stone / brick masonry wall surface and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size solid copper conductor cable as in earth wire and connected to common earth dolly complete all as specified and directed. |
| 3 | All as per item No. 26 hereinbefore but wiring for one 3 pin 5 Ampere socket outlet point on the same board, controlled by other switch complete all as specified and directed. |
| 4 | All as per item No. 2 hereinbefore but wiring for one 3 pin socket outlet 5 amps independent with cable 1.5 sq mm size. |
| 5 | All as per item No.2 hereinbefore but wiring for one 3 pin 15 Ampere socket outlet point using 2.50 sqmm size wire and earth wire of PVC insulated ( green colour) 1.50 sqmm size solid copper conductor cable on the independent board complete all as specified and directed. |
| 6 | M&L Wiring for circuit/sub main wiring 2x6.0 sq. mm and 1x4.0 sq. mm earth wire in PVC surface Conduit of FR PVC insulated copper conductor, single core cable in surface / recessed as required |
| 7 | M&L Wiring for circuit/sub main wiring 2x10.0 sq. mm and 1x6.0 sq. mm earth wire in PVC surface Conduit of FR PVC insulated copper conductor, single core cable in surface / recessed as required |
| 8 | S & F of switch piano flush type single pole one-way 5 Ampere complete all as specified and directed. |
| 9 | S & F of switch piano flush type single pole one-way 15 Ampere complete all as specified and directed. |
| 10 | S & F of 5 Ampere socket outlet flush type, multi purpose suitable for 2 and 3 pins (Total 5 Pins) complete all as specified and directed. |
| 11 | S & F of socket outlet two-in-one, 3 pin each suitable for 5 and 15 Ampere flush type with shuttered complete all as specified and directed. |
| 12 | S & F of Modular switch 1 way 6A, 1 module complete all as specified and directed. |
| 13 | S & F of Modular switch 1 way 16A,1 module complete all as specified and directed. |
| 14 | S & F of Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed. |
| 15 | S & F of Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and directed. |
| 16 | S&F of lamp holder PVC / polycorbonate type insulated body with back plate suitable for batten fitting / angle fitting complete all as specified and directed. |
| 17 | S & F of ceiling rose, surface bakelite, 65 X 50 mm, 3 terminals complete all as specified and directed. |
| 18 | Supply and fixing in replacement to LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 19 | S & F in replacement toLED light fitting 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and directed. |
| 20 | Supply and fixing in replacement to LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 21 | Supply and fixing in replacement to 24 Watt recess mounting 1x1 LED luminaire to enhance the delight of occupants with comfortable experience through its classic design & glare free soft illumination complete all as specified and directed.Make : Havells Cat Part No PLUTO1X1PLR15WLED840SG2 or equivalent approved makes C&S, BAJAJ, WIPRO, PHILIPS. |
| 22 | S&F in replacement of LED driver for 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type complete all as specified and directed.Make : Havells Model No HIPL-75-500-36 Cat Part No LSSLOW0697 or equivalent |
| 23 | Supply and fixing in replacement to LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V ACdecorative type with driver holder and LED lamp including connecting up with three core flexiblecopper conductor cable of suitable size complete all as specified and directed. |
| 24 | S & F replacement to Decorative, wall mounting, brushed nickel finish fixture with acrylic diffuser suitable with 9 W LED lamp B22 base complete all as specified and directed.Make : Havells Cat Part No LHFOAJE1TN1I060 |
| 25 | S & F of sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 4 ways with 200 ampere rated bus bar, 240 volts fixed sunk/flush to the wall or niche complete all as specified and directed. |
| 26 | S & F of sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 8 ways with 200 ampere rated bus bar, 240 volts fixed sunk/flush to the wall or niche complete all as specified and directed. |
| 27 | S & F of sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 12 ways with 200 ampere rated bus bar, 240 volts fixed sunk/flush to the wall or niche complete all as specified and directed. |
| 28 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN of 32 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 29 | Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing andcommissioningcomplete all as specified and directed. |
| 30 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN of 40 to 63 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 31 | Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) TPN of 40 to 100 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed. |
| 32 | Supply and fixing in replacement to 10 Watt garden light unique concept LED Bollard in IP 66 to ensure sustainable performance in all section and aesthetics which keeps the surrounding lively incl required excavation and PCC work (1:3:6) type C-2 complete all as specified and directed.Make : Havells (Cat Part-TURINBLS10WLED830PSYMTOPC or equivalent) |
| 33 | Supply and fixing in replacement to 50 Watt gate light aesthetically designed IP 65 LED post top with aluminium enclosure, powered with high power LEDs as light source and die casted heat sink exhibits classic Victorian look with symmetrical light distribution and excellent heat dissipation for long life including PCC work (1:3:6) type C-2 as required complete all as specified and directed.Make : Havells (Cat Part-JUPITERMAXIPT50WLED830PSYMTOPC or equivalent) |
| 34 | Supply & Fixing in replacement bldg security light luminaires including 25 watt LED street light for 220-230 V, 50 Hz with IP 65 protection including bracket for fixing in wall, made of 25mm bore light grade GI Pipe connecting up with three core twisted flexible copper conductor cable complete all as specified and directed. |
| 35 | Taking down and Repair of Exhaust fan of size 250 mm to 450 mm sweep of any type including replacement of burned copper winding, bearing and any other accessories and refixing after repair with suitable size nut bolts and wire complete all as specified and directed. |
| 36 | M&L for earthing complete with galvanised steel, earth plate electode 600x600x6mm thick buried directly in gournd ( earth pit not less than 2.25mtrs below ground level ) with the top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4mm dia by means of bolts, nuts check nuts and washers of galvanised iron/steel all as shown in electrical plate No 3 on page 423 of MES schedule 2010 Part II connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed 150mm thick all-round the GI earth plate, watering pipe 20 mm dia GI medium grade, GI sheet 0.63 mm thick funnel, wire, gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round suitable lifting handle to cover, GI protection pipe 15mm dia 'light grade' upto 7.5 Mtr from electrode etc, complete all as specified and directed including testing on completion. NOTE:- i) Earth lead beyond 7.5 m from electrode to earth terminal point/main switch board & GI pipe light grade 15 mm dia for protection against mechanical damage to lead shall be measured separately. ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost. |
| 37 | S&F in replacement to Plug Top heavy duty 3-Pin electrical connector, shock proof designed for high power appliences 15A, 230V, 50Hz suitable for Refrigerators and geysers Please Enable Macros to View BoQ information |
