Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | SCHEDULE \\"A\\" : |
| 2 | Item No 01 : Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 3 | Item No 02 : M & L for 25 mm thick plain cement concrete 1: 2: 4 type B-0 using 12.5 mm graded stone aggregate as in base floor or maintain to even surface complete all as specified and directed. |
| 4 | Item No 03 : M&L for nonskid ceramic tiles 7 to 8 mm thick of any shade (square / rectangular) , area of each tile exc 0.06 and not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile , over and including 15mm thick screed bedding layer in cement sand mortar 1:6 complete all as specified and directed. |
| 5 | Item No 04 : M&L for glazed ceramic coloured wall tiles (textured and design as required) in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile , over and including 10 mm thick rendering in CM1:4 , complete all as specified and directed. |
| 6 | Item No 05 : Demolition of Brickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles. |
| 7 | Item No 06 : M&L for brick work built in cement mortar (1:6) using sub class “B” bricks (old) size bricks straight or curved on plan exceeding 6 mtr mean radius complete all as specified and directed. |
| 8 | Item No 07 : Taking down cement plaster on brick wall /ceiling built in cement mortar including raking out joints , hacking for key scrubbing down with water even using WPC complete all as specified and directed. Note: WPC shall be measured and paid separately. |
| 9 | Item No 08 : M & L for rendering 15 mm thick in cement mortar (1:6) on other than faces of brick work and finished the surface even and smooth without using extra compelte all as specified and direceted. |
| 10 | Item No 09 : M&L for Rendering 15 mm thick on fair faces of concrete/brick exterior surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction, finished even and smooth without using extra cement complete all as specified and directed. (WPC shall be measured and paid seperatly) |
| 11 | Item No 10 : Supply only liquid water proofing compound. |
| 12 | Item No 11 : M&L for Rendering 10mm thick on fair faces of concrete surface of ceiling,chajja in CM 1:3, surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 13 | Item No 12 : Taking down Chowkhats with shutters (without taking off shutters from the frame) area not exc 1.5 Sqm each complete as specified and directed. |
| 14 | Item No 13 : Taking down Chowkhats (without taking off shutters from the frame) shutters area exc 1.5 Sqm but nexc 4.0Sqm each complete as specified and directed. |
| 15 | Item No 14 : Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame(88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (Onevertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cutand fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steelFrame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile tobe inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware[Touch Lock of zinc alloyed (white powder coated),steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.( Area not exceeding 2.00 sqm each) |
| 16 | Item No 15 : S&F powder coating anodised aluminium ventilator (having frame size 50 mm x 25 mm x 1.3 mm thick), half portion of the ventilator covered with 5.5 mm thick frosted glasses and half portion fittted with frosted louvers and outer side fitted with mosquito proof galvanised wiremess including removing old steel ventilators incl finishes the demolition surfaces with rendering 10-15 mm thick CM 1:4 of fair finshes including 02 coat of cement based paints with primer incl all fittings , accessories etc ll as specifed and directed by Engr-in-Charge. |
| 17 | Item No 16 : S & F Factory made single extruded WPC (Wood Polymer Composite) solid door Chowkats of size 45 x 70 mm of virgin PVC polymer of K value 58-60(Suspnsion Grade), calcium carbonate and natural fibres (wood powder/ricehusk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threaded star headed SS screws having minimum frame density of 750 kg/cum , screw withdrawal strenght of 2200 N (Face) & 1100 N (Edge) , minimum compressive strenght of 58 N/mm sqr , modules of elasticity 900 N/mm sqr and resistance to spread of flame of Class A category with property of being termite /borer proof , water /mositure prooof and fire retardant and fixed in position with MS hold fast/lugs /SS dash fasteners of required dia and lenght complete as per direction of Engineer-in-Charge . (MS hold fast/lugs or SS dash fasteners etc . |
| 18 | Item No 17 : S & F Factory made single extruded WPC (Wood Polymer Composite) solid DECORATIVE TYPE PANEELED DOOR SHUTTER of size 30 mm thick comprising of virgin PVC polymer of K value 58-60(Suspnsion Grade), calcium carbonate and natural fibres (wood powder/ricehusk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threaded star headed SS screws having minimum frame density of 650 kg/cum , screw withdrawal strenght of 1800 N (Face) & 900 N (Edge) , minimum compressive strenght of 50 N/mm sqr , modules of elasticity 850 N/mm sqr and resistance to spread of flame of Class A category with property of being termite /borer proof , water /mositure prooof and fire retardant . WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as per the direction of Engr-in-Charge . (Note stainless steel butt hinges and necessary scews shall be paid seperately . |
| 19 | Item No 18 : S&F Pressed steel frames for doors size 165x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified |
| 20 | Item No 19 : S&F Pressed steel frames for doors size 105x60mm with one rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified. |
| 21 | Item No 20 : M&L Providing, cement concrete type B-0 1:2:4 (12.5mm graded stone aggregate for filling of Pressed steel frame etc, rounded or chamfered on edges complete as specified, supplied and fixed. |
| 22 | Item No 21 : S & F 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a), complete all as specified and as directed. |
| 23 | Item No 22 : S & F 35 mm thick second class hardwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, moulded on solid (for each side): supplied and fitted to chowkat, complete all as specified and as directed. |
| 24 | Item No 23 : S&F standard aluminium anodised grill made of 5mm thick bar, size of mesh 75 x 75mm using U channel 25mm x 12mm complete all as specified and directed. |
| 25 | Item No 24 : S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples. |
| 26 | Item No 25 : S & F Aluminimum anolised barrel tower bolt of extroded section 150 mm long , complete all as specified and directed. |
| 27 | Item No 26 : S & F Aluminimum anolised barrel tower bolt of extroded section 200 mm long , complete all as specified and directed. |
| 28 | Item No 27 : S&F125mm size, butt hinges, heady weight, cold rolled mild steel. |
| 29 | Item No 28 : S&F 150mm size extruded aluminium alloy handles, fabricated type. |
| 30 | Item No 29 : S&F 300mm aluminium alloy, anodized, sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy. |
| 31 | Item No 30 : S&F, double legged door stopper 150 mm long of aluminium alloy with rubber all as specified and directed. |
| 32 | Item No 31 : M&L for Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specifed and directed. |
| 33 | Item No 32 : M & L for preparation of old painted surface of wood over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 34 | Item No 33 : S&F door spring with 300mm mild steel rat rail rod pattern of standard quality including roller and roller plate complete Helical spring) |
| 35 | Item No 34 : Taking down old curtain rods/ drapery rods of any description and S&F 25 mm Stainless Steel Curtain rod with premium quality including brackets and other accessories complete all as specified and directed. |
| 36 | Item No 35 : S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 |
| 37 | Item No 36 : M & L for preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide as priming caot, complete all as specified and as directed. |
| 38 | Item No 37 : M&L for preparation of Old steel surfaces of any description ,over 10 cm width or girth and applying one coats of synthetic enamelled paint complete all as specified and directed. |
| 39 | Item No 38 : M&L preparation of new/old plastered surfaces of ceiling and applying Two coat of distemper oil emulsion over a coat of primer over and including a coat of 1 mm thick putty, complete all as directed by Engr-in-Charge. |
| 40 | Item No 39 : Complete removal of existing treatment on wall/roof projections including facia cornices etc by scapping with mechanical sander ( having mechnical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free, from dust, loose paint etc by skilled labour complete all as specified and directed. |
| 41 | Item No 40 : Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces. |
| 42 | Item No 41 : M&L for providing and applying 2mm thick wall care putty over prepared surface to achieve the surface even and smooth for painting. |
| 43 | Item No 42 : M&L for two coats of distemmpering with first quality acrylic distemper (ready mixed) having VOC content less than 50 gms / litre of approved manufacture , of required shade and colour over and including a coat of acrylic primer complete , as per manufacturer's specification , complete all as specified and as directed. |
| 44 | Item No 43 : M&L for providing and applying 2mm thick wall care putty over prepared surface to achieve the surface even and smooth for painting. |
| 45 | Item No 44 : S&F in repair PVC (SWR) pipe 110 mm bore, single socketed , in any length with rubber ring joints and jointed with approved adhesive fixed to wall with iron cleants etc complete all as specified and directed. |
| 46 | Item No 45 : S&F in repairs PVC (SWR) Bends (any radius ), diminishing pieces or tapers, bore of pipe 110mm, complete all as spcified. |
| 47 | Item No 46 : S&F in repair PVC (SWR) junction single,(Single T) 110mm dia equal or unequal with access door Y |
| 48 | Item No 47 : S&F PVC in repairs (SWR) Branch pieces , double (double Y ) equal or unequal of pipe 110mm bore complete all as spcified. |
| 49 | Item No 48 : Supply and fix in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fix to wall l all as spcified. |
| 50 | Item No 49 : S&F PVC (SWR) Bends (any radius ), diminishing pieces or tapers, bore of pipe 75mm, complete all as spcified. |
| 51 | Item No 50 : M&L PVC (SWR) floor trap 75mm dia plain with stailless steel grating including jointing with solvent cement etc complete, fixed in repair. |
| 52 | Item No 51 : S&F in repairs PVC (SWR) Branch pieces , double (double Y ) equal or unequal of pipe 75 mm bore complete all as spcified. |
| 53 | Item No 52 : S&F in repairs PVC connections 15 mm size with Brass nuts of length 600mm |
| 54 | Item No 53 : S&F brass chromium plated single lever high flow divertor including brass chromium plated Bib tap and provision for overhead shower including necessary fittings (CPVC MTA/FTA reducer socket and elbow) handle and cover plate complete with wall flange screwd down for CPVC pipe complete all as specifed and directed. |
| 55 | Item No 54 : S&F in repair 125 mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed and directed. |
| 56 | Item No 55 : S&F in repair 15 mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as directed. |
| 57 | Item No 56 : S&F in repair 15 mm dia consealed type stop valves, cast copper alloy, chromium plated, screwed down, high pressure with handle, screwed both ends for iron pipe or union complete all as specified and directed. |
| 58 | Item No 57 : S & F in repairs Stop/angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions. |
| 59 | Item No 58 : S&F in repairs Brass chromiun plated tubular towel rail, 20mm dia ‘D’ type, 60CM long between flanges, fixed in repair. |
| 60 | Item No 59 : S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as directed. |
| 61 | Item No 60 : S & F in repairs Corner Glass Shelf of Size 320 x 320 mm with Silver chromium finished border Oval Range premium quality all as specifed and directed by Engr-in-Charge. |
| 62 | Item No 61 : S & F in repair 5 to 6 mm thick looking mirror any size 450X600 (selected quality) mounted on 6 mm thick PVC Sheet and Aluminum/PVC frame all around including fixed with necessary fixing arrangements, complete all as specified and directed. |
| 63 | Item No 62 : S&F in repairs vitreous china,white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning in, including waste pipe complete all as specified and directed |
| 64 | Item No 63 : S&F in repair chromium plated brass Central hole basinmixer without popup waste system complete screwd down for15 mm GI bore pipe complete all as specifed and directed. |
| 65 | Item No 64 : S&F in repair brass chromium plated bottle traps for wash basins with inlet and outlet screwed for connection including necessary packing, union and cup and fixed 32 mm dia bore of trap. |
| 66 | Item No 65 : S & F in reparis Stainless Steel Wall Mount Soap Case fixed to wall all as specified and directed by Engr-in-Charge. |
| 67 | Item No 66 : S&F, in repair 150mm dia CP Towel Ring complete all as specified and directed. |
| 68 | Item No 67 : S & F Vitreous chaina wash down wall hung water closet pan with PVC slim Cistern including soft closing seat cover and all necessary fitting/fixtures connecting to drain or outgoing pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed. |
| 69 | Item No 68 : S & F in repairs Toielt Paper Holder Stainless Steel fixed to wall al as specifed and directed by Engr-in-Charge. |
| 70 | Item No 69 : S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 71 | Item No 70 : S&F in repairs Brass Butter Fly Jet Spray with 1.2 meter Long Flexible Tube of premium quality fittled to Vitreous china, wash down water closet pan (pedestal pattern) , Stop cock/angle cock all as specfied and directed. |
| 72 | Item No 71 : Dismantling water tanks and removing to store exc 1000 litres capacity. |
| 73 | Item No 72 : S & F Rotational moulded polyethlene water storage tank, tripple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 1000 litres capacity. |
| 74 | Item No 73 : S&F in repair 20mm dia Ball valves,of PTMT high pressure, with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.(Minimum weight 15 to 25mm to 142 - 455 gms) |
| 75 | Item No 74 : S&F in repair 20mm dia Gun-metal, golbe or gate valves, with iron wheel head, screwd both ends or iron pipe and fixed. |
| 76 | Item No 75 : Taking up or down steel tubing and connections for bore of tube 15 mm, complete all as specified and directed. |
| 77 | Item No 76 : S & F 20mm dia CPVC Pipe SDR 11 & plain CPVC SDR 11 all incl jointing and testing concealed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 78 | Item No 77 : S & F of CPVC Brass Elbow for 20 mm dia pipe complete all as specified and directed. |
| 79 | Item No 78 : S & F of CPVC Male/Female Brass Threaded Adaptor for 20 mm dia pipe complete all as specified and directed. |
| 80 | Item No 79 : Treatement for sunken portion in following manner :-Cleaning the sunken surface by sweeping and removing all loose material, dirt etc and brushing with neat cement slurry @ 3Kg/Sm. (Note - Demolition of sunken portion has covered here in below under serial item No 87.00). |
| 81 | Item No 80 : Laying of 30 mm thick (min) PCC M20 (Nominal mix) using 12.5 mm graded stone aggregate mixed with integral water proofing compound as per manufacturer's instruction on bottom of sunken portion with proper slope towards spout. |
| 82 | Item No 81 : Applying rendering 15 mm thick in CM (1:3) mixed with liquid water proofing compound as per manufactirer's instruction , and surfaces finished even and smooth with using extra cement on sunken portion of WC/Bath while PCC is green. The rendering should be extended to vertical sides of sunken portion.Note: WPC will be measured and paid separtely |
| 83 | Item No 82 : S&F GI pipe 40 mm dia light grade as in spout pipe in sunken portion of WC/Bath to drain out seepage water. The spou pipe shall be extended 450 mm from outer face of wall, complete all as specified and directed. |
| 84 | Item No 83 : Providing and applying two coats of polymer based chemical (Dr Fixit Pidifin 2K or Sika Top Seal-107 or Fosroc Brushbond 110 or equivalent of any other approved make) as per manufacturer's instructions as water proof coating over bottom and sides of sunken portion after carry out proper surface preparation including removing loose concrete, foreign materials, cleaning of concrete surface, etc pre dampning of concrete surface, complete all as specified and as directed. Note :- (i) This Application shall be done after laying of all sewage/plumbing pipes with all fixtures in position. (II) After application of this treatment, testing shall be done for water tightness by pounding for 72 hours and if any leekage/seepage noticed , same shall be rectified by the contractor before claiming the payment aginst this items) |
| 85 | Item No 84 : M&L cement concrete 1:5:10 type E-2 using granded crushed brick aggregates as in sunken portion of WC/Bath etc complete all as specified and as directed. |
| 86 | Item No 85 : M&L for 75 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in sub base of complete all as specified and as directed. |
| 87 | Item No 86 : M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 20mm graded crushed stone aggregate) as in plinth protection finished even and fair incl cutting joints and filling with bitumen and sand mixturecomplete all as specified and directed. |
| 88 | Item No 87 : Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 89 | Item No 88 : Demolition of stone slab and tiles, interlocking paver block laid bedded and pointed in any mortor of any description or thickness in floor complete all as specifed. |
| 90 | Item No 89 : M & L Machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20 mm thick screed bed in CM 1:6, complete all as specified and as directed. |
| 91 | Item No 90 : M & L Machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10 mm thick rendering in CM 1:4, complete all as specified and as directed. |
| 92 | Item No 91 : M & L Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms , urinal partition and like overand including 20 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite |
| 93 | Item No 92 : M & L taking down existing roof treatment of any description , including sweeping clean and washing down with water to remove dust etc. complete all as specified and directed.Note : All demolished item shall be removed from Defence land as per dirns of Engr-in Charge. |
| 94 | Item No 93 : M&L for 10 mm thick rendering on concrete surfaces in CM(1:3) mixed with liquid water proofing compound (WPC shall be measured and paid seperatly), surfaces finished even and smooth without using extra cement complete. |
| 95 | Item No 94 : M&L for Water proofing treatment on \\"Non approachable/ non accessible roof\\" surface (Horizontal & Vertical surfaces) in following sequence through authorized applicator of the manufacturer all as specified and directed complete including removal testing complete.(i) Surface prepration like opening the cracks/ removal of loose concrete.(ii) Pressure washing the entire roof to remove dirt, dust alage fungi or other contaminants from joints and entire surface.(iii) Saturation of surface nano technology based deep penetrating sealer application to block pores, capillaries and micro cracks.(iv) Filling the crack with flexible polymer based caulk and further sealing with reinforcement fabric elastomeric coating. (v) Sealing joints and coving area with flexi reinforcement fabric and elastomeric coating.(vi) Two coat of dr fixit URP with fiber mesh or of any equivalent manufacturer (vii) First and Second coat of elastomeric dr fixit Roof Seal or of any equivalent make.The authorized applicators are under:-(i) P Tech Solutions 92 Anurag Nagar Ring Road Indore(ii) MR clean Ventures E-4/402 Arera Colony Bhopal 462016 (iii) Property care, 244 D scheme No 71 Near Shriji Vatika indore 452002 Note:- Guarantee for 10 years shell be furnished. |
| 96 | Item No 95 : M&L for water proofing treatment on vertical walls with following steps :(a) Cutting floor stone and digging upto 0.15 m deep from FFL.(b) Taking down existing plaster and surface cleaning and removing all loose particles.(c) Applying one layer coat of URP in ratio of (1:2) i.e. one part chemical two part cement.(d) Applying a coat of 15 mm thick rendering by using polymer modified ready mix plaster and making 100mm angle fillet over wall and floor joint(e) Applying two coat of URP without any water dilution on plastered surface.Note : (i) The work of water proofing treatment shall be got executed through expert team of manufacturers of authorized application of manufacturer. |
| 97 | Item No 96 : Dismantling wrought iron or mild steel work of any description not otherwise described complete all as specified and directed. |
| 98 | Item No 97 : S&F rolled sections as in posts, main and cross beam, hip and jack rafters,purlins,square round rectangular hollow pipe etc where connected to common rafters (beam,tee,angle ,channel pipes , tubes, plates and flat sections etc)including distances pieces ,cleats etc complete all as speified and directed of grade FE-410,(gde-E-250) quality all as specified and directed. |
| 99 | Item No 98 : S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 100 | Item No 99 : S & F powder coated aluminum door with the following specification and making good the adjacent surfaces complete all as specified and as directed:- (a) Cross section of chowkhat frame 101.60x44.45x2mm thick. (b) Cross section of hanging and meetng style 83x44x2mm thick. (c) Top rail of cross section 114x44x2mm thick. (d) Bottom rail of cross section 114x44x2mm thick.(e) Locking rail (middle rail ) of cross section 83x44x2mm thick. (f) 4mm thick tinted glass make Modi, float . (g) Stainless steel Grade 304 handle eisc type -02 Nos per shutter ( inside & out side). (h) Stainless steel Grade 304 door stopper heavy duty-01 Nos per shutter. (i) Stainless steel Grade 304 tower bolt 200mm long-01 Nos per shutter (inside). (j) Lock with key superior quality make and type as approved by GE openable both from inside & out side -01 Nos per shutter.Note : Febrication of aluminum door shall be done by authoried fabricator. |
| 101 | Item No 100 : Supply and fixing 10 mm thick poly carbonat sheete plain or corrugated sheeting as in roof covering/cladding to wall, fixed with self tapping screws as specified including taking down existing sheeting of any description. |
| 102 | Item No 101 : M&L for mirror poishing of old kota stone to give high glass finish complete all as specified and directed by Engineer-in -Charge |
| 103 | Item No 102 : Supply, laying and testing and commisioning cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core laid in pipes, trenches/ducts, on poles and taking down old unsv complete all as specified and directed. |
| 104 | Item No 103 : Supply laying and jointing GI pipe 'light grade' 50 mm bore in trenches/under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittings complete all as specified and directed. |
| 105 | Item No 104 : Excavation in trenches not exc. 1.5m wide and not exc 1.5m deep in hard/dense soil and getting out complete all as specified and directed by Engr-in-Charge. |
| 106 | Item No 105 : Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed. |
| 107 | Item No 106 : Removing surplus excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified and directed. |
| 108 | Item No 107 : M&L for filling approved fine river sand in trenches as cable cushion to the full width of excavated trench, under and over cable complete all as specified and as directed.(Note : Punned thickness of sand shall be measured) |
| 109 | Item No 108 : M&L for bricks slightly over burnt (kiln burnt), fly ash bricks , best quality, locally available , laid flat, dry, laid in trenches along the length of cable transvarsally with width equal to length of brick for cable protection all as specified and as directed. |
| 110 | Item No 109 : Taking down carefully copper/alluminium point wiring (light, fan, sockets or power ) complete including all fitings and fixtures such as switches,sockets, ceiling roses, pendents, regulators, light fittings etc, removing matrials to store for taking credit and making good disturbed surfaces complete all as specified and directed. |
| 111 | Item No 110 : Taking down carefully copper/aluminium sub-main wiring any type and making good the disturbed surface of walls and floors etc all as directed by Engr-In-Charge. |
| 112 | Item No 111 : Taking up/down existing ceiling fan/exhaust fan of any size and deposit the same in MES store Yard of AGE E/M-III complete all as specified and directed. |
| 113 | Item No 112 : Taking up/down existing geyser any size in position and re-fixing the same after B/R work including painting of the same with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter, with and including providing three core flexible copper cable for connection from ceiling rose/connector complete all as specified and directed by Engr-in-Charge. |
| 114 | Item No 113 : Point wiring with 1.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete , including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FR LSH copper conductor connected to all fittings, common earth and connected to earth dolly including modular metal flush box , cover plate and cover frame of suitable size all fittings and accessories and making good disturbed surface of walls and floors etc. complete all as specified and directed for the following:-(a) One light / fan /bell controlled by one, one way switch 5/6 Amps |
| 115 | Item No 114 : One light / fan /bell controlled by one, two way switch 5/6 Amps |
| 116 | Item No 115 : One 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 amps switch. |
| 117 | Item No 116 : One 3 pin, 5/6 amps socket outlet point on same board controlled by one, one way 5/6 amps switch. |
| 118 | Item No 117 : Point wiring with 2.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 2.5 Sqmm (nominal cross sectional area ) FR LSH copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/16 amps socket out-let point on an independent board including modular metal flush box , cover plate and cover frame of suitable size incl taking down carefully copper/alluminium power point wiring switches , sockets, and making good disturbed surface of walls and floors etc. complete all as specified and directed. |
| 119 | Item No 118 : S&F of Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V |
| 120 | Item No 119 : S & F modular switch 1 way 6 A , 1 module complete all as specified and directed. |
| 121 | Item No 120 : S & F modular switch 2 way 6 A , 1 module complete all as specified and directed. |
| 122 | Item No 121 :S & F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed. |
| 123 | Item No 122 : S/F switch modular type 16 A, 1 module complete all as specified and directed. |
| 124 | Item No 123 : S/F socket modular type multipurposes 6/16 A, 2 module complete all as specified and directed. |
| 125 | Item No 124 : S & F modular bell push flush type , 5 amp as directed by Engr- in -Charge. |
| 126 | Item No 125 : S&F lamp holder insulated body with back plate for batten fittings complete all as directed. |
| 127 | Item No 126 : S&F Buzzer Ding Dong AC 230 Volts Single pole. |
| 128 | Item No 127 : Supply and fixing Inverter LED batten 20 watt with squre profile and polycarbonate channel . Lithium lon battery with extruded environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories and taking down old unsv complete all as specified and directed. |
| 129 | Item No 128 : S & F for Energy saving new generation environmental friendly long life versatile LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting and necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts and taking down old unsv complete all as specified and directed. |
| 130 | Item No 129 : Supply and fixing 10W LED 6500K lights fitting Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories and taking down old unsv complete all as specified and directed. |
| 131 | Item No 130 : S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provosion of LED bulb 10 watts complete and taking down old unsv complete all as specified and directed. |
| 132 | Item No 131 : Supply and fix LED bulb of 7 watt, Of base B-22,6500 K suitable for fixing in lamp holder and taking down old unsv complete all as specified and directed. |
| 133 | Item No 132 : S & F LED recessed/surface down light 15 watt with smart sensor inbuilt microwave motion technology for providing an energy efficent solution with auto dimming option from 100% to 25 % of the rated wattage and taking down old unsv complete all as specified and directed by Engr-in-Charge. |
| 134 | Item No 133 : S&F MCB DB SPN 6/4 way double door with 200 Amps rated bus bar ,230 volts, 50 Hz including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc incl taking down old unsv and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 135 | Item No 134 : S&F(in replacement) MCB DB TPN 6 way double door with 200 Amps rated bus bar ,230 volts, 50 Hz including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall and taking down old unsv complete all as specified and as directed. |
| 136 | Item No 135 : Supply and fixing amp rating 240V, 10KA 'C' curveminiature circuit breaker (MCB) of 4P 100 Amps and current carrying capacity in the MCB DB incl taking down old unsv complete with connection testing and commissioning. |
| 137 | Item No 136 : Supply and fixing (in replacement) 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 Amps and current carrying capacity in the MCB DB complete with connection testing and commissioning. all as specified and directed. |
| 138 | Item No 137 : Supply and fixing (in replacement) 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. |
| 139 | Item No 138 : Supply and fixing amp rating 240V, 10KA 'C' curveminiature circuit breaker (MCB) of 4P 63 Amps and current carrying capacity in the MCB DB incl taking down old unsv complete with connection testing and commissioning. |
| 140 | Item No 139 : M&L for single pole and earth encolsure with a two pin and earth plug with socket 240 Volts, 50 Hz complete with one single pole MCB SP 20 Amps complete all as specified and directed. |
| 141 | Item No 140 : M & L sub main wiring with 02 runs of 6 sqmm main wire along with 01 run of 06 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed / surface conduit (medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same complete all as specified and directed.NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. |
| 142 | Item No 141 : M & L sub main wiring with 02 runs of 4 sqmm main wire along with 01 run of 04 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the samecomplete all as specified and directed.NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. |
| 143 | Item No 142 : All as per item No 146 here in above but with single run of 2.5 Sqmm main wire suitable for invertor supply/UPS complete all as specified and directed. |
| 144 | Item No 143 : Supply & fix plastic body exhaust fan, AC single phase 230/ 240 V of size 200 mm sweep with louver ,white in colour including cutting of wall and duly connection with copper wire from ceiling rose etc complete all as specified and directed. |
| 145 | Item No 144 : S&F replacement of ceiling fans complete with blades, down rods 15mm/12mm upto two mtr, and remote with battery and complete accessories, 230 V, 50Hz, 1200 mm sweep and rated power 26W(+ 10%) and rate speed 350 RPM (+ 10%) Min air delivery 220 CMM with service value shall not be less than 7.9 BEE as per BIS. Five star rated with brushless direct current motor (BLDC), painting to match with existing surfaces including writing the MES number with synthetic enamel paint complete all as specified and directed. |
| 146 | Item No 145 : Replacement of Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 5, connected to earthing test point complete including testing on completion all as specified. |
| 147 | Item No 146 : S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 148 | Item No 147 : S & F for PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 25 mm dia for LAN connections including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed. |
| 149 | Item No 148 : S & F for Modular type RJ 45 with shutter complete all as specified and as directed. |
| 150 | SCHEDULE \\"A\\" (Schedule of credit )Schedule of Credit Rs 4,16,961.00 (Minus) inserted by the MES. (Note : Credit amount shall be deducted manually to arrive net amount) SCHEDULE OF CREDIT Name of Work: SPECIAL REPAIR TO BLDG NO WD-344/B AT CADETS TRAINING WING, MILITARY COLLEGE OF TELECOMMUNICATION ENGINEERING, MHOW Sl No Decription of work Unit Qty Rate Amount |
| 151 | Old unsv floor tile/wall tile etc |
| 152 | Old unsv stone slabs/granite |
| 153 | Old unsv door shutter with/without chowkats exc. 1.5 sqm but not exc 4 sqm incl iron mongery |
| 154 | Old unsv door/window shutter with chowkats n. exc. 1.5 sqm incl iron mongery |
| 155 | Old unsv curtain rod any size any type |
| 156 | Old unsv flushing cistern , PVC any capacity |
| 157 | Old unsv PVC connection of any size |
| 158 | Old unsv grating of any size |
| 159 | Old unsv CP shower rose of any type/size |
| 160 | Old unsv wall mixer |
| 161 | Old unsv basin mixer |
| 162 | Old unsv bottle trap |
| 163 | Old unsv soap case |
| 164 | Old unsv Glass/Corner Shelf |
| 165 | Old unsv paper holder |
| 166 | Old unsv brass/CP bib taps, stop cock , pillar tap 15 mm dia |
| 167 | Old unsv towel rail and towel ring any type /any size |
| 168 | Old unsv looking mirror |
| 169 | Old unsv health faucet/jet spray |
| 170 | Old unsv GI pipe 15 mm |
| 171 | Old unsv PVC pipes and fittings 75 mm |
| 172 | Old unsv PVC pipes and fittings 110 mm |
| 173 | Old unsv PVC fittings bend/elbow/Tee etc |
| 174 | Old unsv PVC over head tank 1000 ltrs |
| 175 | Old unsv ball valves |
| 176 | Old unsv gate valves |
| 177 | Old unsv brick bat/brick work |
| 178 | Old unsv polycarbonate sheet |
| 179 | Old iron scrap |
| 180 | Old unsv AC sheet any thickness |
| 181 | Old Unsv LT Service cable 3.5 core x 35 Sq |
| 182 | Old point wiring such as PVC cable with out batten/ conduit and MS box as existing fo light, fan socket and power point. |
| 183 | Old Unsv switch, sockets, ceiling rose, bell, bell push, lamp holder etc |
| 184 | Old unsv Metal enclosure |
| 185 | Old Unsv fan regulator |
| 186 | Old Unsv MCB DB TPN/SPN any type |
| 187 | Old Unsv MCB SP/ SPN |
| 188 | Old Unsv light fitting any type |
| 189 | Old unsv aluminium/ copper Submain wiring . |
| 190 | OLD Unserviceable earthing materials Total : 416961.0 Notes :- (a) All quantities shown under column 4 are provisional and may vary during execution. Actual amount of credit shall be worked out based on rates inserted under Col. 5 of Schedule of credit. (b) Tenderers are advised to inspect the old material/ items at site and ascertain their condition. It shall be deemed that the contractor has made himself well aware and ascertained the condition of these items whether he inspects them or not. No claim whatsoever on this account shall be admissible by the Government. The mode of measurement shall be same as for the work to executed. tenderers are requested to verify the condition of the materials, any dispute arises at later stage will not be entertained. (c) The items as indicated in Schedule of credit shall be the property of the contractor. The total amount of Schedule of credit shall be deducted from total of Schedule „A' [BOQ] to arrive at Contract Sum. (d) The rates inserted under Column 5 are firm and the contractor shall have no claim what so ever against the department if the actual value of dismantled materials turns out to be different from the cost given by the department. (e) All above materials shall be recorded in MB jointly by Engineer-in -Charge and contractor. (f) No rebate on Schedule of credit shall be accepted. Signature of contractor For Accepting Officer Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
