|
| 1 | M&L for Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed. |
| 2 | M&L Precast Cement Concrete mix 1:3:6 type C1(using 20mm graded stone aggregate) solid block masonry exc 10cm in width and setting in CM 1:6 etc. complete all as specified and directed. |
| 3 | M&L for rendering 10mm thick CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement all as specified and directed. |
| 4 | M&L for Dismantling Plain or corrugated steel or Galvalume sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed. |
| 5 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed. |
| 6 | S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 7 | Cutting chases, pinning in n.exc 10cm girth making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed roof sheets into wall surface etc. complete all as specified and directed |
| 8 | M&L for Plain cement concrete1:3:6 Type C1 (using 20mm graded stone aggregate) as in roof kerbs or mud stops or copings rounded or chamfered on edges including necessary form work complete all as specified and directed. |
| 9 | M&L for Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as directed. |
| 10 | M&L for Dismantling structural steel work including doors, gates but excluding framed truss etc all as specified and directed. |
| 11 | S&F Rolled mild steel section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates Fe-410-W(gde-E-250) quality B all as specified and directed. |
| 12 | S&F Rolled Mild steel section as in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e., within 20mm of the length indicated) in Fe-410-W(Gde-E-250) quality B all as specified and directed. |
| 13 | M&L for Demolition of RCC of any description and in any position not otherwise specifically specified etc. complete all as directed |
| 14 | M&L for Precast RCC 1:2:4, Type B1 (using 20mm graded stone aggregate) as in cover slabs for manholes, drain cover, shelves and similar articles with plain faces set in CM 1:4 etc complete all as specified and directed |
| 15 | S&F precast RCC 1:3:6, type C0 (using 12.5mm graded stone aggregate) as in louvres and jallies of 50mm thick (measured solid) including all mouldings & reinforcement and set in CM 1:4 etc complete all as specified and directed. |
| 16 | M&L for TMT Bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) n.less than 0.9mm dia or securing with clips all as specified and directed. |
| 17 | All as per Ser Item No.16 above but for TMT bars of 6mm to 8mm dia all as specified and directed. |
| 18 | M&L for Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 19 | M&L for Roughening surfaces of old concrete floor, ceilings by picking , sweeping clean and washing down with water to remove dust etc complete all as directed. |
| 20 | M&L for Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement etc complete all as specified and directed. |
| 21 | M&L for Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement etc complete all as specified and directed. |
| 22 | M&L for Brushing neat cement slurry with 3.00 Kg of cement per Sq.metre all as specified and directed. |
| 23 | M&L for Rendering 5mm thick cement plaster in CM 1:3 on fair faces of concrete surfaces such as ceilings etc finished even and smooth without using extra cement etc complete all as specified and directed |
| 24 | M&L for applying 3 coats of white wash on ceilings of newly plastered surfaces including preparation of surfaces etc complete all as specified and directed |
| 25 | M&L for applying 2 coats of Oil bound distemper on walls white or tinted over a coat of primer on chalk whiting including preparation of newly plastered or unplastered surfaces etc complete all as specified and directed |
| 26 | M&L for applying 2 coats of cement base paint over a coat of white alkali resistance primer on newly plastered or unplastered wall surfaces including preparation of new surface complete all as specified and as directed |
| 27 | M&L for applying one coat of white wash on old surfaces of walls including preparation of old wall surfaces all as specified and directed. |
| 28 | M&L for applying one coat of distempering on old surfaces of walls with oil emulsion white or tinted including preparation of old walls surfaces all as specified and directed. |
| 29 | M&L for applying one coat of Cement base Paint on old wall surfaces including preparation of old wall surfaces all as specified and directed. |
| 30 | M&L for applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide previous on steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described including preparation of new or previously un treated steel surfaces all as specified and directed. |
| 31 | M&L for applying one coat of Synthetic enamel paint over steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described including preparation of old painted surfaces complete all as specified and directed. |
| 32 | M&L for applying one coat of Synthetic enamel paint over wooden surfaces of any description, not otherwise described over 10 cm width or girth including preparation old painted wooden surfaces complete all as specified and directed. |
| 33 | M&L for applying one coat of Synthetic enamel paint over old steel / Iron surfaces of any description, n exc 10 cm in width or girth including preparation old painted steel / Iron surfaces all as specified and directed. |
| 34 | M&L for preparation of old decorated surfaces of walls (Border & vertical projections such as cols, chajja, facia beams and the like), floor, interlocking tiles & chequered tile and road side kerb etc by washing rubbing down and stopping of painted surfaces and applying one coat of exterior acrylic emulsion anti fungal paint any colour or shade complete all as specified and directed . |
| 35 | M&L for Demolition of un-reinforced cement concrete in ground floors and pavings of any thickness (Below or above ground level) complete all as specified and directed |
| 36 | M&L for Hard core of gauge n exc 63mm in broken stone or boulders, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface all as specified and directed. |
| 37 | M&L for Plain Cement Concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete all as specified and directed. |
| 38 | M&L for Plain Cement Concrete 1:3:6 Type C2 (using 40mm graded stone aggregate) as in surface channels and drains all as specified and directed. |
| 39 | M&L for 100mm thick Plain Cement Concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub-floors, sub bases, floors and pavings etc all as specified and directed. |
| 40 | M&L for 100mm thick Plain Cement Concrete 1:2:4, type B-2 (using 40mm graded stone aggregate) as in sub-floors, sub bases, floors and pavings etc all as specified and directed. |
| 41 | M&L for Sand filling under floors or in foundations including watering and consolidation, spreading and levelling in layers n.exc 25cm thick well ramming including watering as required all as specified and directed. |
| 42 | M&L for Machine pressed precast concrete Interlocking paver block rubber moulded with laquer finished of any shape and size confirming to IS-15658-2006 of 60mm of thickness, M-35 Grade with grey cement and no pigment etc complete all as specified and directed. |
| 43 | M&L for Forming construction Joint 30mm deep x 10mm wide filled with sealing compound Grade \\"B\\" complete all as specified and directed. |
| 44 | M&L for Forming, 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound Grade \\"B\\" for Thickness of Slab 100mm complete all as specified and directed. |
| 45 | M&L for 25mm thick Plain Cement Concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) finished even and smooth all as specified and directed. |
| 46 | M&L for Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) including removing rubbish off the premises complete all as specified and directed. |
| 47 | M&L for 15mm thick Screed bed or bedding layer in CM 1:6 all as specified and directed. |
| 48 | M&L for Vitrified Ceramic Tiles 10mm thick (square/ rectangular) polished , Light shade area of each tiles n.exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles etc complete all as specified and directed |
| 49 | M&L for Non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles etc complete all as specified and directed |
| 50 | M&L for Non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles etc complete all as specified and directed |
| 51 | M&L for coloured glazed ceramic tiles, size 200x300x7mm / 350x250x7mm / 450x300x7mm size, set and jointed in neat cement slurry over and including 10mm thick backing coat in CM 1:3 and pointed in coloured cement to match colour of tiles on vertical surface such as skirting dado etc complete all as specified & directed |
| 52 | M&L for Dismantling boarding any description, fixed in any position with nails all as specified and directed. |
| 53 | S&F 2nd class soft wood 15mm thick Boarding fixed with nails in any situation planned one side with butt joints all as specified and directed. |
| 54 | M&L for applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer on new wooden surfaces of any description, not otherwise described over 10 cm width or girth all as specified and directed. |
| 55 | S&F in repairs Mortice lock, Brass, vertical type, size 100 mm, 4 lever all as specified and directed. |
| 56 | M&L for Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads/EPDM gaskets all as specified and as directed. |
| 57 | M&L for Hacking out old broken glass from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified and directed. |
| 58 | S&F plain sheet glass 4mm thick, ordinary quality and glazing with oil putty or using EPDM Gaskets in squares n.exc 0.50 Sqm in each pane all as specified and directed. |
| 59 | S&F Solar control film 25 micron reflective type sticked to glass panes as per manufacturers instructions all as specified and directed. |
| 60 | S&F in repair SS wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed |
| 61 | S&F in repairs Door closer hydraulically regulated, with aluminium extruded section body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 62 | M&L for Running welding in repairs of thickness of metal to be welded n exc 6mm complete all as specified and directed. |
| 63 | M&L for Welding in repairs n.exc 2.5cm in length of thickness of metal to be welded n.exc 6mm complete all as specified and directed. |
| 64 | M&L for Welding in repairs exc 2.5cm but n exc 5 cm in length of thickness of Metal te be welded n.exc 6mm complete all as specified and directed. |
| 65 | M&L for Welding in repairs exc 2.5 cm but n.exc 5 cm in length of thickness of Metal to be welded exc 6mm but n.exc 9mm complete all as specified and directed. |
| 66 | S&F Hard drawn welded steel wire fabric weight per sqm not exc 4.00 Kg supplied and fixed complete to wood or steel members complete all as specified and directed. |
| 67 | S&Fin repairs MS plain black sheet of 0.63mm thickness in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up mitred angles etc as required all as specified and directed. |
| 68 | M&L for taking up or down 20mm Bore of pipe steel tubing and connections, including cleaning for re-fixing or removal to store all as specified and directed. |
| 69 | M&L for taking up or down steel tubing 25mm Bore of pipe and connections, including cleaning for re-fixing or removal to store all as specified and directed. |
| 70 | M&L for Refixing of old steel tubing and connections in new or old position (Walls, ceiling, floors etc) after cleaning it for Bore of pipe 20mm all as specified and directed. |
| 71 | M&L for Refixing of old steel tubing and connections in new or old position (Walls, ceiling, floors etc) after cleaning it for Bore of pipe 25mm all as specified and directed. |
| 72 | S&F GI tubing 20 mm dia medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 73 | S&F GI tubing 25mm dia medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 74 | S&F CPVC pipes 20mm Outer dia, SDR 11 & Plain CPVC SDR 11 fittings on wall, ceiling and in floors all as specified and as directed. |
| 75 | S&F CPVC pipes 25mm Outer dia, SDR 11 & Plain CPVC SDR 11 fittings on wall, ceiling and in floors all as specified and as directed. |
| 76 | S&F in repairs of Gun-metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed for Bore of pipe 25mm all as specified and directed. |
| 77 | S&F in repairs of Gun-metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed for Bore of pipe 20mm all as specified and directed. |
| 78 | M&L for Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement, including forms, moulds, mitred/stopped ends etc all as specified and directed. |
| 79 | M&L for Extra for forming fair finished drain or channel 50cm inner girth in cement concrete using extra cement, including forms, moulds, mitred/stopped ends etc all as specified and directed. |
| 80 | M&L for Taking down soil waste/vent pipes (any size or length/ pattern), including all fittings complete all as specified and directed. |
| 81 | S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid in floors including flat iron clamp for proper fixing complete all as specified & directed |
| 82 | S&F in repairs PVC (SWR) bends 110mm dia with access door complete all as specified & directed |
| 83 | S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid in floors including flat iron clamp for proper fixing complete all as specified & directed |
| 84 | S&F in repair PVC (SWR) bends 75mm dia with access door complete all as specified & directed Please Enable Macros to View BoQ information |
| 85 | S&F in repair PVC (SWR) bends 75mm dia with access door complete all as specified & directed Please Enable Macros to View BoQ information |
