Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Item No. 01 : Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 2 | Item No. 02 : Demolition of stone slabs and tiles of any description or thickness, interlocking tiles in floors/ walls laid bedded and pointed in any mortar. |
| 3 | Item No. 03 : Demolition of Brickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles |
| 4 | Item No. 04 : Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 5 | Item No. 05 : Taking down Chowkhats with shutters (without taking off shutters from the frame) area not exc 1.5 Sqm each complete as specified and directed. |
| 6 | Item No. 06 : Taking down steel window Chowkhats with shutters (without taking off shutters from the frame ) area exc 1.5 Sqm but nexc 4.0Sqm each complete as specified and directed. |
| 7 | Item No. 07 : Taking down Chowkhats with shutters (without taking off shutters from the frame ) and refixing in the same opening area exc 1.5 Sqm but nexc 4.0Sqm each complete as specified and directed. |
| 8 | Item No. 08 : Taking down Shutters of any description exc . 1 sqm but n. exc 2 sq. m each of any description complete all as specified and directed. |
| 9 | Item No. 09 : S&F Pressed steel frames for doors size 165x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified. |
| 10 | Item No. 10 : S&F Pressed steel frames for doors size 105x60mm with one rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified. |
| 11 | Item No. 11 : M & L PCC 1:2:4 type B0 (12.5 mm graded) aggregate for filling in pressed steel door framed. |
| 12 | Item No. 12 : S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain glazed and skeleton shutters open rebated and prepared to to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutterof size 30 mm thick comprising of virgin PVC polymer of K value 58-60(Suspnsion Grade), calcium carbonate and natural fibres (wood powder/ricehusk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threaded star headed SS screws having minimum frame density of 650 kg/cum , screw withdrawal strenght of 1800 N (Face) & 900 N (Edge) , minimum compressive strenght of 50 N/mm sqr , modules of elasticity 850 N/mm sqr and resistance to spread of flame of Class A category with property of being termite /borer proof , water /mositure prooof and fire retardant . WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as per the direction of Engr-in-Charge . (Note stainless steel butt hinges and necessary scews shall be paid seperately .Make : ECOCELL ( Product of Kumar Arch Tech Pvt Ltd), Floresta, of equivalent. |
| 13 | Item No. 13 : S & F 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a) |
| 14 | Item No. 14 : S & F 35 mm thick second class hardwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, moulded on solid (for each side): supplied and fitted to chowkat. |
| 15 | Item No. 15 : S&F Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge. |
| 16 | Item No. 16 : S&F Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge |
| 17 | Item No. 17 : S&F100mm size, butt hinges, medium weight, cold rolled mild steel. |
| 18 | Item No. 18 : S&F125mm size, butt hinges, medium weight, cold rolled mild steel. |
| 19 | Item No. 19 : S & F Aluminum handle cast type anodized size 150 mm long, complete all as specified and directed. |
| 20 | Item No. 20 : S & F Aluminimum anolised barrel tower bolt of extroded section 150mm long , complete all as specified and directed. |
| 21 | Item No. 21 : S&F 300mm aluminium alloy, anodized, sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy |
| 22 | Item No. 22 : S&F Hasp & staple aluminium anodised, safety type, including bolt to hinge plate and fixed with screw 100mm size. |
| 23 | Item No. 23 : S&F door spring with 300mm mild steel rat rail rod pattern of standard quality including roller and roller plate complete Helical spring). |
| 24 | Item No. 24 : Providing and fixing fixed louvers fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 grams/Sqm) with thickness of 0.58mm coated sections to be primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick, section for external frame 33 x 58 mm, glass holding flanges made of polypropylene, sections are to be cut to length, mitre joined with corner bracket. The above frames should be fixed to the concrete/masonry walls by means of self expanding screws. |
| 25 | Item No. 25 : Providing and fixing pre painted steel sliding window 3-Track, 2 glass panel and 1 mesh panel sliding window fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (Base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 GM/Sq.mtr) with total coated thickness of 0.58mm. Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. Section for external frame should be of 107x44mm, Section for shutter should be of 35x49mm. Section of mesh should be of 35 x 49 mm.The windows should be paneled with 5mm thick plain clear glass. Corner bracket for internal and external frame made of glass filled nylon. Gaskets are to be made of Ethyl Propylene Diamine Monomer (EPDM).The sections are to be cut to length, joined and assembled by means of corner bracket. The above frames should be fixed to the concrete/masonry walls by means of self expanding screws . |
| 26 | Item No. 26 : S&F standard aluminium anodised grill made of 5mm thick bar, size of mesh 100 x 100mm using U channel 25mm x 12mm complete all as specified and directed. |
| 27 | Item No. 27 : M&L for preparation of new steel surfaces of any description ,over 10 cm width or girth and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed. |
| 28 | Item No. 28 : M&L for preparation of old steel surfaces of any description ,over 10 cm width or girth and applying one coats of synthetic enamelled paint complete all as specified and directed. |
| 29 | Item No. 29 : M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified. |
| 30 | Item No. 30 : M&L for preparation of old wooden painted surface and applying one coat of synthetic enamel paint of any description, not otherwise, described, over 10cm width or girth complete all as specified and directed. |
| 31 | Item No. 31 : Virified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 |
| 32 | Item No. 32 : Virified Ceramic tiles 8-10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm , on vertical surfaces such as skirting including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 33 | Item No. 33 : M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 |
| 34 | Item No. 34 : M&L for glazed ceramic coloured wall tiles (textured and design as required) in vertical surface 350x 250x 7mm / 450X 300X 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified and directed. |
| 35 | Item No. 35 : M&L for 300 x 300 x 10mm thick heavy duty (ENDURA) ceramic floor tile laid in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 36 | Item No. 36 : M & L for 25 mm thick PCC 1: 2: 4 type B-0 using 12.5 mm graded stone aggregate as in base floor or maintain to even surface complete all as specified and directed. |
| 37 | Item No. 37 : M&L for 75mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection finished even and fair incl cutting joints and filling with bitumen and sand mixturecomplete all as specified and directed. |
| 38 | Item No. 38 : M&L 40mm thick plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate), laid in alternate panels as in car parking garage complete all as specified and directed. |
| 39 | Item No. 39 : M&L Machine cut mirror polished kota stone slab flooring with rounded edge 20-25 mm thick over and including cement mortar screed bed (1:6) 20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed. |
| 40 | Item No. 40 : M&L Machine cut kota stone skirting 20-25 mm thick in riser of steps skirting, dado, and pillar over and including 10mm thick backing coat in cement mortar in (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding and mirror polishing complete all as specified and directed. |
| 41 | Item No. 41 : M&L for mirror poishing of old kota stone to give high glass finish complete all as specified and directed by Engineer-in -Charge. |
| 42 | Item No. 42 : M&L 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/rounding ) in steps, jambs, pillars, window cills, cooking platforms and like over and including 20 mm thick cement mortar in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 43 | Item No. 43 : M &L for Brickwork with subclass 'B' bricks, straright or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed. |
| 44 | Item No. 44 : Taking down cement plaster on brick wall /ceiling built in cement mortar including raking out joints , hacking for key scrubbing down with water etc. complete all as specified and directed (any height up to G+5). |
| 45 | Item No. 45 : M&L for Rendering 15 mm thick on fair faces of concrete/brick surfaces in cement mortar 1:6, finished fair and even without using extra cement complete all as specified and directed .(any height up to G+5). |
| 46 | Item No. 46 : M & L for prepration of new wall surfaces & applying wall care white putty 2 mm thick for levelling the surfaces and applying two coat of interior emulsion distemper over a coat of wall primer incl. preparation of surfaces of walls etc complete. (any height of bldg). |
| 47 | Item No. 47 : M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately) (any height up to G+5). |
| 48 | Item No. 48 : Forming groove of uniform size 15 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove, complete all as specified and directed by Eng-in-Charge. |
| 49 | Item No. 49 : M&L for complete removal of existing treatment from walls (Internal) by scrapping & washing etc and applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces including properly making of 'V' shape crakes and filling of all crakes with crakes seal of walls and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed. (any height of bldg). |
| 50 | Item No. 50 : M&L for Rendering 5 mm thick on fair faces of concrete surface of ceiling,chajja in CM 1:3, surface finished even and surface without using extra cement complete all as specified and as directed. |
| 51 | Item No. 51 : M&L for Preparation of Newly plastered surface and applying three coats of white wash on Ceiling complete all as specified and as directed. |
| 52 | Item No. 52 : M&L preparation of old plaster surfaces of ceiling and applying one coat of white wash all as directed by Engr-in-Charge . |
| 53 | Item No. 53 : M&L for Preparation of 0ld plastered surfaces and applying Two Coats of cement base paint on Walls complete all as specified and as directed. |
| 54 | Item No. 54 : M&L Cutting holes in brick/block walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required exc half brick n.exc one brick complete as specified. |
| 55 | Item No. 55 : S&F in repair anodised aluminium curtain rod/rail 25 mm dia including brackets, clamps complete all as specified & directed. |
| 56 | Item No. 56 : S&F in repair Vitreous china water closet rimless one piece EWC with slim sofit close seat cover 660 x 350 x 745 mm concelled S trap for better aesthetic snow white - whiter than whitest complete all as specified. |
| 57 | Item No. 57 : S & F in repairs Vitreous China Thin Rim Table Top Basin . Shape -Round , Size - 360 x 360 x 120 mm . Make : Parryware, Hindware, Cera, Hindustan) or equivalent. |
| 58 | Item No. 58 : S&F in repair brass chromium plated bottle trap for wash basin 32 mm bore with inlet and outlet screwed for pipe or connection and with one cleaning cap, complete all as specified and diretced. |
| 59 | Item No. 59 : S&F in repair Looking Mirror 6.3mm thick exc 0.50 each pane, Grinding, polishing and rounding edge of glass, drilling holes in glass any type fixed on wall with chrominum plated screws complete all as specified and as directed. |
| 60 | Item No. 60 : S&F, PVC cabinet mirror of size 450x300x100 mm with selected quality glass all as specified and directed. |
| 61 | Item No. 61 : S&F in repair chromium plated brass wall mixer 3-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange (without hand &over head Shower screwd down for15 mm GI bore pipe complete all as specifed and directed. |
| 62 | Item No. 62 : S&F in repair chromium plated brass Central hole basinmixer long body without popup waste system complete screwd down for15 mm GI bore pipe complete all as specifed and directed. |
| 63 | Item No. 63 : S&F in repair 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified. |
| 64 | Item No. 64 : S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 65 | Item No. 65 : S&F in repair 15mm size PVC connections internally threaded with PVC washer,PTMT nuts of length 450mm complete all as specified and directed. |
| 66 | Item No. 66 : S&F in repair 15 mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as directed. |
| 67 | Item No. 67 : S&F in repair 125 mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed and directed. |
| 68 | Item No. 68 : S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as directed. |
| 69 | Item No. 69 : S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with all plugs, washers, fittings and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specifed and directed. |
| 70 | Item No. 70 : S&F in repair chromium plated brass Sink mixer waste system complete screwd down for15 mm GI bore pipe complete all as specifed and directed. |
| 71 | Item No. 71: S&F in repairs kitchen plate rack with and including shelves and hanging arrangement for utensil for kitchen , made of stainless steel sheet 0.63 mm thick size 30\\"x36\\"x10\\" complete as as specifed and directed. |
| 72 | Item No. 72 : S & F in repairs Stop/angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions. |
| 73 | Item No. 73 : S & F in repairs two way bib tap / angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions. |
| 74 | Item No. 74 : S & F in repairs Toielt Paper Holder Stainless Steel fixed to wall al as specifed and directed by Engr-in-Charge. |
| 75 | Item No. 75 : S & F in reparis Stainless Steel Wall Mount Soap Case fixed to wall all as specified and directed by Engr-in-Charge. |
| 76 | Item No. 76 : S&F in repairs Brass Butter Fly Jet Spray with 1.2 meter Long Flexible Tube of premium quality fittled to Vitreous china, wash down water closet pan (pedestal pattern) , Stop cock/angle cock all as specfied and directed. |
| 77 | Item No. 77 : Taking up or down 15 mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed. |
| 78 | Item No. 78 : S&F, laying and testing for 16 mm bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in wall complete all as specified. all fittings such as union, reducer, sockets, reducing bends elbows tee, FTA, MTA, Achecknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed. |
| 79 | Item No. 79 : Taking up or down steel tubing and connections for bore of tube 20 mm, complete all as specified and directed. |
| 80 | Item No. 80 : S&F, laying and testing for 25 mm bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in wall complete all as specified. all fittings such as union, reducer, sockets, reducing bends elbows tee, FTA, MTA, Achecknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed. |
| 81 | Item No. 81 : Taking down Old PVC or AC rainwater/waste/vent pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed. |
| 82 | Item No. 82 : S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fix to wall l all as spcified. |
| 83 | Item No. 83 : S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fix to wall all as spcified. |
| 84 | Item No. 84 : S&F PVC (SWR) Bends (any radius ), diminishing pieces or tapers, bore of pipe 75mm, complete all as spcified. |
| 85 | Item No. 85 : S&F PVC (SWR) Bends (any radius ), diminishing pieces or tapers, bore of pipe 110mm, complete all as spcified. |
| 86 | Item No. 86 : S&F in repairs PVC (SWR) Branch pieces , double (double Y ) equal or unequal of pipe 75 mm bore complete all as spcified. |
| 87 | Item No. 87 : S&F PVC (SWR) Branch pieces , double (double Y ) equal or unequal of pipe 110mm bore complete all as spcified. |
| 88 | Item No. 88 : S&F PVC (SWR) junction single, (Single T) equal or unequal of pipe 110 mm bore complete all as spcified. |
| 89 | Item No. 89 : S&F PVC (SWR) junction double double T) equal or unequal of pipe 110mm bore complete all as spcified. |
| 90 | Item No. 90 : S&F PVC (SWR) door Bends (any radius), diminishing pieces or tapers, bore of pipe 75mm, complete all as spcified. |
| 91 | Item No. 91 : S&F PVC (SWR) door Bends (any radius ), diminishing pieces or tapers, bore of pipe 110mm, complete all as spcified. |
| 92 | Item No. 92 : S&F PVC floor trap, with grating 75mm including jointing to wast pipe fixed in cement concrete type B1 (1:2:4) ,in repairs and including waterleak proor treatment complete all as spcified. |
| 93 | Item No. 93 : Dismantling water tanks and removing to store exc 500 & n. exc 1000 litres capacity. |
| 94 | Item No. 94 : S & F triiple layer Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 1000 litres capacity. |
| 95 | Item No. 95 : S&F in repair 20mm dia Ball valves,of PTMT high pressure, with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.(Minimum weight 15 to 25mm to 142 - 455 gms). |
| 96 | Item No. 96 : S&F in repair 20mm dia Gun-metal, golbe or gate valves, with iron wheel head, screwd both ends or iron pipe and fixed. |
| 97 | Item No. 97 : S&F in repairs 18 mm thick factory made PVC sheet one side pre-laminated sheet as in ktichen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5 mm thick PVC sheet lipping at all four edges using bonding tape etc complete all as per specified and directed by Engr-in-Charge manufactures specification. |
| 98 | Item No. 98 : S & F in repairs factory made PVC shelf/partition of required size consisting of panel of 18 mm thick required size consisting of panel of 18 mm thick celuka PVC ply and for supporting the hold of shelf /partition and shall provided 3 edges in size 18mm x 18 mm as per required lenght the front side of the edge visible in the front of the shelf/partition to be edge lipped by 18mm widht x 1 mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company , using solvent cement etc. |
| 99 | Item No. 99 : M&L for providing PVC WALL PANELLING of 5 mm thick consisting of panel of desired size stuck on inner frame work of 50 mm wide strips of 5 mm thick prelaminated PVC sheet . The panel & strips shall be density of 600 kg/CBM manufactured by ISO-9001-2015 certified company . The strips should have in their centre a gove of 6mm widht and 1 mm depth for sinking the head screws used to fix the strip to the wall vertically at an equal interval of 10 inch between two PVC strips .The PVC strips shall be fixed to the wall using 65 mm long MS screws through the groove in the strip by using PVC fasteners the distance between two screws shall not be more than 200 mm . A groove of 2mm may be left at the joint of two panels for aesthetic looks . The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall optionally a strips of 5 mm thick PVC sheets of width 75mm feathered at the edges shall be stuck at the places where two panels are joined using solvent cement. |
| 100 | Item No. 100 : S&F stainless steel shelf closing hinges 75 mm size for PVC door shutters complete all as specified and directed |
| 101 | Item No. 101 : S&F 50 x 15 mm size magnet door catcher for closing for PVC door shutter complete all as specifid and directed. |
| 102 | Item No. 102 : S& F 100 mm size MS mat/glossy finish handle complete all as specfied and directed. |
| 103 | Item No. 103 : S&F modular type stainless steel Cutlery basket size 20 x 17 x 4 inches 9 dia of wire not less than 3.00 mm ) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arrangement complete all as specified and directed. |
| 104 | Item No. 104 : As as per item No 103 above but plain busket size 20 x 19 x 6 incles complete all as specifed and directed. |
| 105 | Item No. 105 : As as per item No 103 above but thali busket size 20 x 17 x 6 incles complete all as specifed and directed. |
| 106 | Item No. 106 : As as per item No 103 above but cup & saucer busket size 20 x 19 x 4 incles complete all as specifed and directed. |
| 107 | Item No. 107 : As as per item No 103 above but grain busket size 20 x 19x 6 incles complete all as specifed and directed. |
| 108 | Item No. 108 : As as per item No 103 above but plain busket size 20 x 19 x 8 incles complete all as specifed and directed. |
| 109 | Item No. 109 : S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc cutting half brick thick wall and fixing with cement mortar complete all as speified and directed of grade FE-410,(gde-E-250) quality all as specified and directed. |
| 110 | Item No. 110 : Dismantling Plain or Corrugated steel / fibre sheeting any gauge,thickness ,including Nainital or similar pattern Roof covering. |
| 111 | Item No. 111 : S & F Polycarbonate sheet ( Transparent) plain or corrugated 10 mm thick as in roof covering/cladding to wall, fixed with necessary self tapping screws, aluminum plates/Sheets. Complete all as specified and directed. |
| 112 | Item No. 112 : S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 113 | Item No. 113 : S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges,roof covering /cladding to wall, fixed with self tapping screws as specified. |
| 114 | Item No. 114 : S&F rolled sections as in posts, main and cross beam, hip and jack rafters,purlins,where connected to common rafters (beam, tee, angle, channel pipes, tubes, plates and flat sections etc) including distances pieces, cleats etc cutting half brick thick wall and fixing with cement mortar complete all as speified and directed of grade FE-410, (gde-E-250) quality all as specified and directed. |
| 115 | Item No. 115 : S&F Steel work in tubular trusses including special shaped washer etc. as in posts, main and cross beam, hip and jack rafters, purlins, where connected to common rafters (beam, tee,channel pipes , tubes, and flat sections etc) including distances pieces, cleats etc cutting half brick thick wall and fixing with cement mortar complete all as speified and directed of grade FE-410, (gde-E-250) quality all as specified and directed.(Including any height of the bldg G+2/G+3) |
| 116 | Item No. 116 : S&F MS plates (plain or chequred) channels square cut to or notched forming holes with riveted bolted or welded attachment for Fe-410W complete all as specified and directed. |
| 117 | Item No. 117 : M&L for providing stainless steel railing for balcony consisting of stainless steel pipes of different dia including socket, reducer, knobs balls and cups of matt finish, type and size as approved by Engineer-in-charge/GE |
| 118 | Item No. 118 : M&L for toughened glass 12 mm thick for balcony railing including all necessaary fitting complete all as specified and directed. |
| 119 | Item No. 119 : M&L 2nd class hard wood, clean sawn, in scantling timber frame and fixed with nails complete all as specifed and directed. |
| 120 | Item No. 120 : Formwork to chullah hoods, chajjas, troughs and similar items in cluding edges. |
| 121 | Item No. 121 : M&L Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete. |
| 122 | Item No. 122 : M&L RCC type A 1 1: 1.5: 3 (20 mm graded aggregate ) in, Chajja, roofs, landings, balconies, canopies, deck slabs and in shelves and the like |
| 123 | Item No. 123 : M & L for cement concrete 1:4:8, type D2 using 40mm graded aggregate for in foundations, filling and mass concrete etc complete all as specified and directed. |
| 124 | Item No. 124 : M&L for 50mm thick sand cushining under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 125 | Item No. 125 : M&L for machine pressed precast concrete interlocing paver block with grey cement and pigment conforming to IS-15658-2006 of 60 mm thickness, M-35 grade laid dry in floor/path complete all as specified. |
| 126 | Item No. 126 : M&L for water proofing treatment on vertical walls with following steps :(a) Cutting floor stone and digging upto 0.15 m deep from FFL.(b) Taking down existing plaster and surface cleaning and removing all loose particles.(c) Applying one layer coat of URP in ratio of (1:2) i.e. one part chemical two part cement.(d) Applying a coat of 15 mm thick rendering by using polymer modified ready mix plaster and making 100mm angle fillet over wall and floor joint(e) Applying two coat of URP without any water dilution on plastered surface.Note : (i) The work of water proofing treatment shall be got executed through expert team of manufacturers of authorized application of manufacturer. |
| 127 | Item No. 127 : M&L Water proofing treatment on \\"Non approachable / non accessible roof\\" surface (Horizontal & Vertical surfaces) in following sequence through authorized applicator of the manufacturer all as specified and directed complete including removal of existing treatment.(i) Cleaning the roof surface by water and brushing with neat cement slurry @ 3Kg/Sm. (ii) Apply 10 mm thick rendering in CM 1:3 mixed with liquid water proofing compound (as per manufacturer's instruction) on roof surface finished even & smooth without using extra cement (Note : WPC to be paid seprately).(iii) After the plaster has cured , the plastered surface shall be throughtly cleaned and shall be applied with bituminous base primer confirming to IS 3384-1965 @ 0.3 Kg / Sqm, till the roof surface is properly intregnated.(iv) After application of primer the roof surface shall be laid with APP modified polymeric membrane having minimum weighing 3.8 to 4 kg per Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid and bounded to the sub-strata by heat process, over laps shall be sealed/fused by flame touch as per manufacturer's instruction. (v) Applying two coats of aluminium paint over top surface of APP membrane @ 0.20 Kg per Sqm in two coats etc complete all as specified and as directed |
| 128 | Item No. 128 : Supply only liquid water proofing compound |
| 129 | Item No. 129 : Treatement for sunken portion is as follows :-Laying of 30 mm thick (min) PCC M20 (Nominal mix) using 12.5 mm graded stone aggregate mixed with integral water proofing compound as per manufacturer's instruction on bottom of sunken portion with proper slope towards spout. |
| 130 | Item No. 130 : Applying rendering 15 mm thick in CM (1:3) mixed with liquid water proofing compound as per manufactirer's instruction , and surfaces finished even and smooth with using extra cement on sunken portion of WC/Bath while PCC is green. The rendering should be extended to vertical sides of sunken portion.Note: WPC will be measured and paid separtely. |
| 131 | Item No. 131 : S&F GI pipe 40 mm dia light grade as in spout pipe in sunken portion of WC/Bath to drain out seepage water. The spou pipe shall be extended 450 mm from outer face of wall, complete all as specified and directed. |
| 132 | Item No. 132 : Providing and applying two coats of polymer based chemical (Dr Fixit Pidifin 2K or Sika Top Seal-107 or Fosroc Brushbond 110 or equivalent of any other approved make) as per manufacturer's instructions as water proof coating over bottom and sides of sunken portion after carry out proper surface preparation including removing loose concrete, foreign materials, cleaning of concrete surface, etc pre dampning of concrete surface, complete all as specified and as directed. Note :- (i) This Application shall be done after laying all sewage/plumbing pipes with all fixtures in position. (II) After application of this treatment, testing shall be done for water tightness by pounding for 72 hours and if any leekage/seepage noticed , same shall be rectified by the contractor before claiming the payment aginst this items) |
| 133 | Item No. 133 : M&L cement concrete 1:5:10 type E-2 using granded crushed brick aggregates as in sunken portion of WC/Bath etc complete all as specified and as directed. |
| 134 | Item No. 134 : M&L for 75 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in sub base of complete all as specified and as directed. |
| 135 | Item No. 135 : S&F Fibre reinforced plastic (FRP) manhole cover (with frame) of size 900mm X 600mm having load bearing Capacity 12.5 Ton, confirming to BS EN-124 and IS 1729-1991, complete all as specified and as directed. |
| 136 | Item No. 136 : S&F Fibre reinforced plastic (FRP) manhole cover (with frame) of size 600mm X 600mm having load bearing Capacity 12.5 Ton, confirming to BS EN-124 and IS 1729-1991, complete all as specified and as directed. |
| 137 | Item No. 137 : Taking down carefully copper/alluminium point wiring (light, fan, sockets or power ) complete including all fitings and fixtures such as switches,sockets, ceiling roses, pendents, regulators, light fittings etc, removing matrials to store for taking credit and making good disturbed surfaces complete all as specified and directed. |
| 138 | Item No. 138 : Taking down carefully copper/aluminium sub-main wiring any type and making good the disturbed surface of walls and floors etc all as directed by Engr-In-Charge. |
| 139 | Item No. 139 : Taking up/down existing exhaust fan of any size and re-fixing the same after B/R work including winding of the fan, repair of defective parts, painting of the complete fan with synthetic enamel paint by spraying including filling cavities with filler, etc. and deposit unsv exhaust fan to MES store yard of AGE E/M-III complete all as specified and directed by Engr-in-Charge. |
| 140 | Item No. 140 : Taking down carefully light fitting any type for refixing OR taken in schedule of credit all as specified and as directed. |
| 141 | Item No. 141 : Taking up/down existing Gysers 25 ltr and re-fixing the same after B/R work including Overhauling and replacing of defective/rusted parts and taking out U/S parts by unscrewing bolts and nuts and change of u/s three pin top, heating element, thermostat, bottom plate and heavy duty PVC connection hot/cold, etc. Checking defects and re-assembling the Geyser after refixing serviceable/new parts & cleaning ,descaling, complete painting of the geyser with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust, re-installed the geyser in suitable place/position and connecting inlet-outlet connections & testing complete, and writing MES Number in black paint with skilled painter complete all as specified and directed by Engr-in-Charge. |
| 142 | Item No. 142 : Point wiring with 1.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete , including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FR LSH copper conductor connected to all fittings, common earth and connected to earth dolly including modular metal flush box , cover plate and cover frame of suitable size all fittings and accessories and making good disturbed surface of walls and floors etc. complete all as specified and directed for the following:-(a) One light / fan /bell controlled by one, one way switch 5/6 Amps |
| 143 | Item No. 143 : One 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 amps switch. |
| 144 | Item No. 144 : One 3 pin, 5/6 amps socket outlet point on same board controlled by one, one way 5/6 amps switch. |
| 145 | Item No. 145 : Point wiring with 2.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 2.5 Sqmm (nominal cross sectional area ) FR LSH copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/16 amps socket out-let point on an independent board including modular metal flush box , cover plate and cover frame of suitable size incl taking down carefully copper/alluminium power point wiring switches , sockets , and making good disturbed surface of walls and floors etc. complete all as specified and directed. |
| 146 | Item No. 146 : S&F of Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V. |
| 147 | Item No. 147 : S&F modular switch 1 way 6 A , 1 module complete all as specified and directed. |
| 148 | Item No. 148 : S/F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed. |
| 149 | Item No. 149 : S/F switch modular type 16 A, 1 module complete all as specified and directed. |
| 150 | Item No. 150 : S/F socket modular type multipurposes 6/16 A, 2 module complete all as specified and directed. |
| 151 | Item No. 151 : S&F lamp holder insulated body with back plate for batten fittings complete all as directed. |
| 152 | Item No. 152 : S & F bell push flush type , 5 amp as directed by Engr- in -Charge. |
| 153 | Item No. 153 : S & F Buzzer Ding Dong AC 230 Volts Single pole. |
| 154 | Item No. 154 : Supply and fixing Inverter LED batten 20 watt with squre profile and polycarbonate channel with Lithium lon battery and with extruded environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories all as specified and directed. |
| 155 | Item No. 155 : Supply and fix LED bulb of 7 watt, Of base B-22, cat part no LHLDBWHB4L8R007, lm 700, col tamp 6500 K suitable for fixing in lamp holder. |
| 156 | Item No. 156 : S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provision of LED bulb 10 watts light complete complete all as specified and as directed. |
| 157 | Item No. 157 : S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. |
| 158 | Item No. 158 : Supply and fixing 10W LED 6500K lights fitting Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories all as specified and directed. |
| 159 | Item No. 159 : S&F exhaust fan , steel body AC single phase 230 volt of size 300 mm sweep complete with blade, frame and louvers including making suitable size of hole to existing brick wall for fan base including writting the MES Number wherever necessary and making good disturbed surface, painting to match with existing surfaces complete all as specified and directed. |
| 160 | Item No. 160 : S & F LED recessed/surface down light 15 watt with smart sensor inbuilt microwave motion technology for providing an energy efficent solution with auto dimming option from 100% to 25 % of the rated wattage complete all as specified and directed by Engr-in-Charge. |
| 161 | Item No. 161 : M & L sub main wiring with 02 runs of 6 sqmm main wire along with 01 run of 06 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed (medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes and making good the same complete all as specified and directed.NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. |
| 162 | Item No. 162 : M & L sub main wiring with 02 runs of 4 sqmm main wire along with 01 run of 04 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same complete all as specified and directed.NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. |
| 163 | Item No. 163 : S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 164 | Item No. 164 : S & F for sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall and taking down old unsv complete all as specified and as directed. |
| 165 | Item No. 165 : Supply and fixing MCB TPN 40 to 100 Amp, 415V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB and taking down old unsv complete with connection testing and commissioning. |
| 166 | Item No. 166 : S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall and taking down old unsv complete all as specified and as directed. |
| 167 | Item No. 167 : Supply and fix MCB SPN 40 to 63 Amp 10 KA, 'C' series including connection with suitable size aluminium / copper lugs complete and taking down old unsv all as specified and directed by Engr-in-Charge. |
| 168 | Item No. 168 : Supply and fix MCB SP 6 to 32 amps 10 KA, 'B' series including connection with suitable size aluminium / copper lugs complete and taking down old unsv all as specified and directed by Engr-in-Charge. |
| 169 | Item No. 169 : M&L for single pole and neutral encolsure with a two pin and earth plug with socket 240 Volts, 50 Hz complete with one single pole MCB SP 20 Amps and taking down old unsv complete all as specified and directed. |
| 170 | Item No. 170 : S & F for Hose box made of 18 gauge MS Sheet 800mm X 600mm X 250mm with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red out side and brilliant white inside yard including taking down old unsv complete all as specified and directed. |
| 171 | Item No. 171 : S & F fire fighting hose reel drum (swinging type) with 30 meter long, 32mm dia hand lever operated Ball valve, connecting directly from the riser through 32 mm dia. GI pipe with sockets, 5mm dia shut off nozzle of sufficient length at one end of this hose and leaded tin, bronze rings and adopter to get in to the instantaneous female coupling complete with suitable drawn brackets, hub etc. including taking down old unsv complete all as specified and. The hose reel shall conform to IS:884-1969 by Engr-in- Charge. |
| 172 | Item No. 172 : Hacking out old broken glass (any thickness, size, quality or description) from from metal frame including punching or drilling out old glazing pins / spring clips / removing beads etc, including making good breakages in taking out and providing for fixing of new ones of suitable size ordinary quality and glazing with oil putty in square complete including cutting of glass in oval shape complete all as directed by Engr-in-Charge. |
| 173 | Item No. 173 : M&L for painting of fire fighting MS pipe 80 to 150 mm dia with one coat of low VOC synthetic enamel paint of red colour and make to give an even shade including surface preparations all as specified and directed. SCHEDULE OF CREDIT SPECIAL REPAIR TO 110 SINGLE OFFICERS ACCOMMODATION AT BAINS ENCLAVE (BLDG NO WB-355A, WB-355B, WB-355C) AT MCTE UNDER, MCTE MHOW Sl No Decriptipin of work Unit Qty Rate Amount |
| 174 | Item No. 173 : M&L for painting of fire fighting MS pipe 80 to 150 mm dia with one coat of low VOC synthetic enamel paint of red colour and make to give an even shade including surface preparations all as specified and directed. SCHEDULE OF CREDIT SPECIAL REPAIR TO 110 SINGLE OFFICERS ACCOMMODATION AT BAINS ENCLAVE (BLDG NO WB-355A, WB-355B, WB-355C) AT MCTE UNDER, MCTE MHOW Sl No Decriptipin of work Unit Qty Rate Amount |
| 175 | Old U/S floor/wall tiles/Stone slabs |
| 176 | Old U/S brick bats |
| 177 | Old U/S Chowkhats with shutter nexc 1.5 Sqm each including all fitting |
| 178 | Old U/S Chowkhats with shutter exceed exc 1.5 Sqm but nexc 4 Sqm each including all fitting |
| 179 | Old unsv Shutter of area exc 1 Sqm but n exc 2 Sqm |
| 180 | Steel Scrap |
| 181 | Old U/S GI Pipe 15 mm |
| 182 | Old U/S GI Pipe 20 mm |
| 183 | Old U/S Bib tap/pillar tap/stop cock/ conceled stop cock/ angle stop cock 15 mm dia |
| 184 | Old U/S 110/ 75mm PVC Rain water pipe / floor pipe |
| 185 | Old U/S 110/75mm PVC SWR Fittings |
| 186 | Old U/S boarding in copboards in wall/shelves with all fittings |
| 187 | Old U/S Steel sink withall fittings |
| 188 | U/S health faucet/shower/toilet paper holder/towel rail/bottle trap |
| 189 | Old U/S PVC water tank any size 1000 ltr |
| 190 | U/S gate valve/ Gate valve 20 mm dia |
| 191 | U/S Curtain/ drapery rod any type incl brackets |
| 192 | Wall Mixer any type |
| 193 | Basin mixer any type |
| 194 | Old unsv AC sheet any thickness |
| 195 | Old point wiring such as PVC cable with out batten/conduit and MS box as existing light, fan socket and power point. |
| 196 | Old Unsv switch, sockets, ceiling rose, lamp holder, bell push, bell etc. |
| 197 | Old unsv fan regulator |
| 198 | Old unsv TPN/SPN DB |
| 199 | Old unsv SP/SPN |
| 200 | Old unsv MCB TPN |
| 201 | Old Unsv light fitting any type |
| 202 | Old Unsv MCB Metal clad any type |
| 203 | Old unsv aluminium/copper submaim wiring. |
| 204 | Old U/S hose reel drum |
| 205 | Old U/S Hose Box Total : 749876.0 Notes :- (a) All quantities shown under column 4 are provisional and may vary during execution. Actual amount of credit shall be worked out based on rates inserted under Col. 5 of Schedule of credit. (b) Tenderers are advised to inspect the old material/ items at site and ascertain their condition. It shall be deemed that the contractor has made himself well aware and ascertained the condition of these items whether he inspects them or not. No claim whatsoever on this account shall be admissible by the Government. The mode of measurement shall be same as for the work to executed. tenderers are requested to verify the condition of the materials, any dispute arises at later stage will not be entertained. (c) The items as indicated in Schedule of credit shall be the property of the contractor. The total amount of Schedule of credit shall be deducted from total of Schedule „A' [BOQ] to arrive at Contract Sum. (d) The rates inserted under Column 5 are firm and the contractor shall have no claim what so ever against the department if the actual value of dismantled materials turns out to be different from the cost given by the department. (e) All above materials shall be recorded in MB jointly by Engineer-in -Charge and contractor. (f) No rebate on Schedule of credit shall be accepted. Signature of contractor For Accepting Officer Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
