|
| 1 | Taking down chowkhats or frame with shutter (without taking off shutters from the frame) n exc 1.5 sqm each, complete all as specified and directed. |
| 2 | Taking down shutters of any description exc. 1.00 Sqm and n exc 2.00 Sqm each, complete all as specified and directed. |
| 3 | Taking down Chowkhats with shutter (without taking of shutter from the frame ) exc 1.5 sq. m but n exc 4 sq. m each and refixing in same opening, complete all as specified and directed. |
| 4 | Taking down shutter and refixing in same opening, shutters of any description exc. 1.00 and n exc 2 sq.m each with existing chowkat, frame or with new chowkat or frame after necessary repair work including easing and adjusting, complete all as specified and directed. |
| 5 | Taking down aluminium door, window and partition (of any type/ size) and refixing the same including necessary repairs such as straighting of edges, bringing at level with required cutting/ adjusting of any depression/ projection to the same opening, complete all as specified and directed. |
| 6 | Supply and fix Factory made Pressed steel door frames 1.25mm thick (125x60mm wide ) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed. |
| 7 | Supply and fix Factory made Pressed door steel frames 1.25mm thick (105x60mm wide ) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed. |
| 8 | Supply and fix Plain, solid, straight wooden chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 9 | Materials and Labour for glazed ceramic coloured tiles, 450 X 300 X 7mm thick, conforming to IS 15622,Grade B III, on vertical surface of wall such as dados, skirting etc., set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:4) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed. |
| 10 | Materials and Labour for Non - skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, conforming to IS 15622,Grade B IIa, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed. |
| 11 | Materials and Labour for Non - skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,conforming to IS 15622,Grade B IIa, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises, complete all as specified and directed. |
| 12 | Materials and Labour for Non - skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, conforming to IS 15622, Grade B IIa, on vertical surface of wall such as dados,skirting etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:3) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises, complete all as specified and directed. |
| 13 | S & F 35 mm thick 2nd class hard wood Factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I, section-8, clause 8.24 (a), complete all as specified and as directed. |
| 14 | S & F Factory made 35mm thick 2nd class HW rail & stile plain framed, panelled shutter with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and as directed. |
| 15 | S & F Mild Steel Butt hinges 100mm long cold rolled medium weight (ISI marked, ISI specification), complete all as specified and as directed. |
| 16 | S & F 150mm long Aluminium anodised handles, fabricated type, (ISI marked, ISI specification), complete all as specified and as directed. |
| 17 | S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy (ISI mark, ISI specification) and fixed, complete all as specified and as directed. |
| 18 | S&F 150 mm long Aluminium anodised, barrel tower bolts of extruded section (ISI marked, ISI specification) , complete all as specified and directed. |
| 19 | S & F Mild Steel Helical Door Spring 300mm long ordinary rat tail pettern inclduing roller and roller plate to be fixed to MS chowkhat with necessary welding work, complete all as specified and as directed. |
| 20 | S &F 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed. |
| 21 | S&F mild steel framed work such as grills, grating, window grills, hold fasts etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings and similar work confirming to Fe-290 Gde -E-165 including taking down old one complete all as specified and directed. |
| 22 | Material and labour for preparation of new wooden surfaces over 10cm width or girth and applying two coats synthetic enamel paint over a coat of pink primer, complete all as specified and as directed. |
| 23 | Material and labour for preparation of new steel or iron surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed. |
| 24 | Material and labour for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) for fixing hold fast and backfilling in pressed steel chowkhat, complete all as specified and as directed. |
| 25 | S & F in repair factory made steel windows with side hung shutters including projecting type hinges with mild steel handle, and steel peg stay complete without glazing bars dovetailed or welded and making good the disturbed wall surfaces in CM (1:2) or PCC (1:2:4) type B1( including necessary arrangements to fix the same in multy storey bldgs up to G+2), complete all as specified and as directed. |
| 26 | S & F in repair factory made steel windows with side hung shutters including projecting type hinges with mild steel handle, and steel peg stay complete with glazing bars dovetailed or welded and making good the disturbed wall surfaces in CM (1:2) or PCC (1:2:4) type B1 (including necessary arrangements to fix the same in multi-storey bldgs up to G+2 ), complete all as specified and as directed. ` |
| 27 | S & F in repair aluminium window shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, 1.5 mm thick aluminium section, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 28 | S & F in repair aluminium ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, 1.5 mm thick aluminium section, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed by Engineer in Charge |
| 29 | Supply and fixing, in repairs aluminium with powder coating,(minium thickness of powder coating 50 micron) frame 92mm x 29.5mm for three track sliding windows, two glazed and one gauzed shutter with one or more rebates including jointing cleat for fixing etc, with sliding type shutters, without sash bars, aluminium sections with powder coated (minium thickness of powder coating 50 micron) 39 x20mm including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium with powder coated (minium thickness of powder coating 50 micron) snap beading, scrwes etc. with suitable sliding & locking arrangements, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and 4.8mm thick tinted sheet glass, complete all as specified and as directed. As per TD : AF/TD/252/15 (R) sheet No 1 to 6 or as per directed by Engineer in Charge. |
| 30 | M & L for 4 mm sheet glass ordinary quality, in squares exc 0.5 sqm each pane for windows including necessary arrangements to fix the same in multy storey bldgs up to G+2, complete all as specified and as directed. |
| 31 | Supply and fix 4.8mm thick, tinted sheet glass ordinary quality and door and windows ventilator etc with rubber packing in square n exc 0.5 sq. m in each pane including hacking out old broken glass (any thickness, size from aluminium beading), complete all as specified and directed. |
| 32 | Supply and fix 4.8mm thick, tinted sheet glass ordinary quality and door and windows etc with rubber packing in square exc 0.5 sq. m in each pane including hacking out old broken glass (any thickness, size from aluminium beading), complete all as specified and directed. |
| 33 | S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm as in windows with & incuding necessary nails, screw bolts and nut bolts for MS window etc complete all as specified and as directed . |
| 34 | Supply and fix in repair for 2nd class HW plain fillets, square, rectangular or triangular in section exc 06 Sqcm but n exc 13 Sqcm wrought finished fixed with nail including dismantling the existing fillets, complete all as specified and directed. |
| 35 | S & F 18/19 mm thick Veneered particle board, interior grade, solid core, with decorative veneers on both faces fix with screw to timber frame work as in shutter, shelves of cupboard including suitable beading to cover the exposed edges including taking down old boarding of any description and in any position, complete all as specified and as directed. |
| 36 | S & F in repairs 18/19 mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain sheets comprising of virgin polymer K value 58-60 (suspension Grade), calcium carbonate and natural fibers (Wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screws withdrawal strength of 1800 N (face) & 900 N (Edge), Minimum compressive strength 50 N/sqmm, modulus of elasticity 850 N/Sqmm and resistance to spread of flame of Class A caterory with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S S screws, all as per direction of ENgineer in Chare, (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately). |
| 37 | S & F 50mm dia, polished, Ist class hard wood knobs, fixed with screws, complete all as specified and as directed. |
| 38 | S & F Factory made PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19x19mm MS Square tube, EPDM rubber gasket weather seal shall be provided through out the frame, the profile shall be mitre cut at two corners and joined by inserting 2 nos of 150mm long brackets of 15x15mm MS square tube inside the 19mmx19mm MS square tube and suitabley screwed to be fixed with 08 nos 75mm long MS Screws with PVC fasters per chowkhat, complete all as specified and as directed. |
| 39 | Supply and fix for factory made PVC door shutter 30mm thick (style) consisting of frame made out MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, complete all as specified and as directed. |
| 40 | S & F 100mm long aluminium anodized barrel tower bolts of extruded section (as per ISI marked and ISI specification), fixed with stainless steel screws, complete all as specified and as directed. |
| 41 | S & F 100 mm long Stainless steel butt hinges medium weight complete (as per ISI marked and ISI specification), fixed with stainless steel screws, complete all as specified and as directed. |
| 42 | M & L for 3mm thick, sheet glass ordinary quality, glazing with oil putty in square n exe 0.5 Sqm in each pane including hacking out old broken glass and providing and fixing new ones, complete all as specified and directed. |
| 43 | S & F in Repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm as in doors, windows and Ventilators with & incuding necessary, woodeen beading, nails, screw bolts and nut bolts for MS window etc, complete all as specified and as directed. |
| 44 | Supply and fix in repair for 25mm dia stinless steel tubular curtain rod with fixing Knob, brackets, stops, rollers etc. (Sample as kept in AGE B/R II), complete all as specified and as directed. |
| 45 | Material and labour for 2nd class hard wood timber scantling, clean sawn as in frame work, fixed with nails including dismantling frame work timber scantling 40 Sqcm and over in section, complete all as specified and as directed. |
| 46 | Materials and Labour for anodised aluminium snap grid framework for false ceiling, size of grid 605 mm x 605 mm as per clause 10.38 of SSR Part-I (2009) including 6 mm thick, high pressure steam cured (HPSC) non asbestos fibre cement building boards fixed or laid to aluminium framework with screws and including dismantling existing wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness including cover fillets, complete all as specified and directed. |
| 47 | Supply and fix in repair for aluminium (extruded section) body door closer hydraulically regulated designation No 3 universal type suitable for door shutter for a door shutter of 851 to 1000mm in width and weight of 61 to 80 Kg, complete all as specified and directed. |
| 48 | S & F in repair for 300mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed. |
| 49 | Supply and fix in repair for brass 2 levers mortice lock, vertical type, size 100mm, complete all as specified and as directed |
| 50 | S&F in repair for 150 mm long Aluminium anodised, barrel tower bolts of extruded section (as per ISI marked and ISI specification), fixed with stainless steel screws, complete all as specified and directed. |
| 51 | S&F in repair for 100 mm long Aluminium anodised, barrel tower bolts of extruded section, (as per ISI marked and ISI specification) , fixed with stainless steel screws, complete all as specified and directed. |
| 52 | S & F in repair for Mild Steel Helical Door Spring 300mm long ordinary rat tail pettern inclduing roller and roller plate to be fixed to MS chowkhat with necessary welding work, complete all as specified and as directed. |
| 53 | S & F prepainted galvatume aluminium zinc coated GI based corrugated steel sheet 0.50 mm thickness of any colour having tensile strength of 550 Mpa as in roof covering / clading to wall fixed with self tapping screw including dismantling plain or corrugated steel sheeting, any gauge, thickness, complete all as specified and as directed. |
| 54 | S & F Pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 05mm thick of having tensile strength of 550 mpa in roof covering, fixed with self tapping ccrews including dismantling plain or corrugated steel sheeting, any gauge, thickness, complete all as specified and as directed. |
| 55 | Materials and Labour for 4 mm thick Asbestos cement plain building boards, fixed to timber framework with screws in ceiling flat or sloping including dismantling existing wall and ceiling boards (fibre,pulp,insuration,etc.) insulation boards/slabs/blankets,any thickness, including cover fillets, complete all as specified and directed. |
| 56 | Materials and Labour for 6 mm thick, high pressure steam cured (HPSC) non asbestos fibre cement building boards fixed or laid to aluminium framework with screws and including dismantling existing wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness including cover fillets, complete all as specified and directed. Materials and Labour for rendering 8 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 12 mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed.Note: - (Water proofing compound will be measured and paid separately) Please Enable Macros to View BoQ information |
