|
| 1 | M&L for preparation of old decorated surface of internal wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and applying two coats of acrylic oil bound distemper make the surface smooth using roller all as specified and prescribed by manufacturer of paint and all as directed at site by Engr-in-Charge |
| 2 | M&L for preparation of old decorated surface of exterior wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two coats of exterior anti fungal acrylic weather proof emulsion paint (walmasta of Berger paint / Asian paint / Nerolac / make as per Particular Specification (list of Make) as approved by GE) complete all as specified and directed at site by Engineer-in-Charge.Note: (i) All stages of surface preparation and finishing coats shall be carried out only after stage passed by the Engr-in-Charge/GE.(ii) A written warranty for four years or as per the manufacturer’s instructions, whichever is greater, shall be submitted by the contractor |
| 3 | M&L for preparation of new surface of exterior wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two coats of exterior anti fungal acrylic weather proof emulsion paint (walmasta of Berger paint or equivalent in Asian paint, Nerolac etc ) complete all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge.Note: (i) All stages of surface preparation and finishing coats shall be carried out only after stage passed by the Engr-in-Charge/GE.(ii) A written warranty for four years or as per the manufacturer’s instructions, whichever is greater, shall be submitted by the contractor |
| 4 | M&L for preparation newely plastered surface of wall and applying two coats of cement base paint etc complete all as specified and directed. |
| 5 | M&L for preparation Old plastered surface of wall and applying two coats of cement base paint etc complete all as specified and directed. |
| 6 | M&L for three coats of white wash on ceiling on new plastered surfaces including preparation of surfaces complete all as specified and directed. |
| 7 | M&L for two coats of white wash on ceiling on old plastered surfaces including preparation of surfaces complete all as specified and directed. |
| 8 | M&L for preparation of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 9 | M&L for preparation of new wooden surface of any description, not other wise described over 10 cm widht or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and directed. |
| 10 | M&L for preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed. |
| 11 | M&L for preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 12 | M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of wall primer complete all as specified and directed. |
| 13 | M&L for preparing plastered surface of wal and applying 1mm thick wall care Putty on wall complete as specified and directed.Make: Birla/Asian/JK / make as per Particular Specification (list of Make) as approved by GE. |
| 14 | M&L for applying primer on old /new surface of wall with alkali resistant priming paint complete as specified and directed. |
| 15 | M&L for rendering 5 mm thick in CM (1:3) on RCC Chajja / Facia over and including 20mm thick in CM (1:4) as dubbing coat etc complete all as specified and directed. |
| 16 | M&L for two coat of painting with Damp guard (or make as per Particular Specification (list of Make) as approved by GE)) water proofing liquid including preparation of new plastered surfaces complete all as specified and directed by Engineer-in-Charge. |
| 17 | Disconnecting existing tanks of capacity exc 250 ltr but not exc 500 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position all as specified and directed. |
| 18 | Disconnecting existing tanks of capacity exc 500 ltr but not exc 1000 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position all as specified and directed. |
| 19 | Cleaning of roof slab /chajja with sweeping with brooms removing all depositions /mud/vegetations washing with water etc and removing the spoil to a distance exc 50 m complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 20 | Cleaning of roof slab /chajja with sweeping with brooms removing all depositions /mud/vegetations washing with water etc and removing the spoil to a distance exc 50 m complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
