|
| 1 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 2 | Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure above floor two level upto floor five level with thickness 15 cm in CM 1:6 (1 cement : 6 coarse sand) etc complete. |
| 3 | 12 mm cement plaster of mix 1:6 (1 cement : 6 fine sand). |
| 4 | Cement mortar 1:6 (1 cement : 6 fine sand). |
| 5 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer. |
| 6 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications: Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr/10 sqm. |
| 7 | Supplying and fixing 200 mm Aluminium aldrop |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level: 1:2:4 (cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 9 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc complete. Size of Tile 500x500 mm. |
| 10 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications: Painting steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture. |
| 11 | Providing and fixing PTMT pillar cock of approved quality and colour, 15 mm nominal bore, 107 mm long, weighing not less than 110 gms. |
| 12 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of G.S. Sheet. |
| 13 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side and polyester top coat 15-18 microns including fixing with self drilling/self tapping screws with EPDM seal complete excluding purlins, rafters and trusses. |
| 14 | Steel work in built up G.I tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc complete. |
| 15 | Removing and refixing door shutters after necessary repairs for easy opening and closing etc complete as per the direction of site Engineer-in-charge. |
| 16 | Removing and refixing window shutters after necessary repairs for easy opening and closing etc complete as per the direction of site Engineer-in-charge. |
| 17 | Providing and fixing PTMT stop cock of approved quality and colour, 15 mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 18 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface complete including disposal of rubbish within 50 metres lead: With cement mortar 1:4 (1 cement : fine sand). |
| 19 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink with drain board 510x1040 mm bowl depth 250 mm |
| 20 | Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete (aluminium frame work shall be paid separately). |
| 21 | Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/angle sections of approved make conforming to IS:733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/stainless steel sunk screws and fixing the framework complete as per approved drawings. |
| 22 | Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level for 10 cm thick wall in CM 1:6 (1 cement : 6 coarse sand) including cost of scaffolding complete. |
| 23 | 12 mm cement plaster of mix 1:4 (1 cement : 4 fine sand). |
| 24 | Taking out the existing water closet (Indian toilet pan) along with its trap by carefully breaking and removing the surrounding cement or concrete without damaging the existing drainage line. |
| 25 | Providing and fixing white vitreous china pedestal type water closet (European type W.C pan) with seat and lid, 10 litre low level white PVC flushing cistern including flush pipe with manually controlled device conforming to IS:7231 with all fittings complete including cutting and making good walls and floors. |
| 26 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level: 1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). |
| 27 | Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge |
| 28 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in colours laid on 20 mm thick cement mortar 1:4 including jointing and pointing complete. |
| 29 | Providing and fixing 100 mm sand cast Iron grating for gully trap |
| 30 | Providing and fixing PTMT bib cock of approved quality and colour, 15 mm nominal bore, 122 mm long, weighing not less than 99 gms |
| 31 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of G.S Sheet. |
| 32 | Providing and fixing precoated galvanised iron profile sheets 0.50 mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277 complete with self drilling/self tapping screws with EPDM seal excluding purlins, rafters and trusses. |
| 33 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications: Painting steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied over primer complete. |
| 34 | Steel work in built up G.I tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying priming coat of approved steel primer including welding and bolting complete. Please Enable Macros to View BoQ information |
