|
| 1 | WS-EX-WST-HDPE) Supply and erection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of following litres (excluding free board) of approved brand (superior variety) with ISI Mark (marked with tank itself) with top lid with provisions of locking including necessary specials and fittings for storing potable water and manufactured with material which do not import any taste / odour / any toxic effect and not to contaminate etc.WS-EX-WST-700 lt(a)700 litres |
| 2 | WS-EX-ASTM-PVC) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of suitable schedule (40) of wall thickness not less than the specified in IS 4985 suitable for plumbing by threading of wall thickness including the cost of suitable PVC specials /GM specials like Elbow, Tee reducers, Plug, union, bend, coupler, nipple/ GM gate valve, check and wheel valve etc.WS-EX-ASTM-32 PVCa) 32mm dia |
| 3 | WS-EX-ASTM-25 PVCb) 25mm dia |
| 4 | EL-IN-EF-AC) Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator on the existing board etc., all complete (Excluding cost of fan) |
| 5 | WS-IN-HCP-LBT) Supplying and fixing of 15mm dia half turn C.P Tap (Long body Tap) of Best quality including cost of tap with required specials and labour for fixing etc, |
| 6 | WS-IN-HCP-SBT) Supplying and fixing of 15mm dia half turn C.P Tap (Short body Tap) of Best quality including cost of tap with required specials and labour for fixing etc, |
| 7 | SA-Ex-SWR P-Dia) Supplying and fixing the following dia PVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type `B` for soil line with relevant specials confirming to IS 14735 including jointing with seal ring confirming to IS 5382 with leaving a gap about 10mm to allow thermal expansion, fixing the pipes into walls with necessary UPVC special clamps, wooden plug, screws, holding wherever necessary and making good of the dismantled portion with necessary connections to sanitary fittings etc.,SA-Ex-SWR P-110a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete., |
| 8 | SA-Ex-SWR P-75) b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete., |
| 9 | EL-IN-CEP-PS) Supplying and fixing 15amps 3 pin plug type socket on a suitable MS box 16g thick concealed and covered with 3 mm thick laminated hylem sheet inclusive of all connections and cost of all materials. |
| 10 | EL-IN-EF-8 SWG) Supplying and laying of 8SWG GI wire on wall below ground levels with necessary ‘U’ Nails, earth work excavation and refilling etc... including cost of all materials etc.. |
| 11 | EL-IN-EF-ES) Providing Earthing Station using Pipe electrode as per IS 3043 using 2.5 m of 40 mm dia and 1.0 m of 20 mm dia B Class. GI pipe including earthwork excavation, brickwork in cement mortar, plastering, 38 mm trench RCC cover for the brick masonry, 20 mm GI Check nuts, bolts, washers, GI bend, reducer, coupling, funnel with wire mesh of 12.5 mm dia, copper plate 125 mm x 50 mm x 6 mm ( 0.36 kg ), including 1 bag ( 40 kgs ) charcoal, salt 10 kg including cost of all materials and labour,etc |
| 12 | EL-IN-EF-MB) Supplying and fixing best country wood meter cupboard with shutters double leaves with 230mmx25mm size CW planks for alround sides 62.5 mm x31.25mm styles and rails for shutters and 75mm x 25mm weld mesh of 6 and 10 gauge for panels including labour charges |
| 13 | EL-IN-OEP-SLP) Wirng with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable with surface run by means of 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable (Open wiring)EL-IN-OEP-WCRa. Light point with ceiling rose |
| 14 | EL-IN-OEP-WOCR) b) Light point with bakelite pattern type holder |
| 15 | EL-IN-OEP-CB) c) Point wiring for calling bell/ buzzor with push type switch |
| 16 | EL-IN-OEP-FP) Wirng with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable with surface run by means of 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable confirming to IS 694 / 1980 with ISI mark in PVC rigid conduit pipe heavy duty with ISI mark with suitable size MS box of 16g thick concealed and covered with 3mm thick laminated hylem sheet for FAN POINT controlled by 5 amps flush type switch including citcuit mains, cost of all materials, specials, etc., all complete, (Open wiring) |
| 17 | EL-IN-OEP-SLP) Wirng with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable with surface run by means of 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable confirming to IS 694 / 1980 with ISI mark in PVC rigid conduit pipe heavy duty with ISI mark with suitable size MS box of 16g thick concealed and covered with 3mm thick laminated hylem sheet for Stair case light point controlled by 5 amps flush type switch including citcuit mains, cost of all materials, specials, etc., all complete, (Open wiring) |
| 18 | EL-IN-EF-DP) Supply and fixing of follwing Double pole main switch with fuse and neutral link on a suitable well varnished teak wood board including necessary interconnection,cost of all materials etc., all complete as directed by the departmental officers.EL-IN-EF-DP-32aa)32 amps DP main switch with fuse and neutral link |
| 19 | EL-IN-EF-F) Supply and delivery of following Electric Ceiling fan with ISI mark with blades and double ball bearing, capacitor,etc., complete with 300mm down rod, canopies, capacitor, shackleblades with dimmer electronic regulator suitable for operation on 230 volts 50 HTZ single phase AC supply conforming to ISS No.374/2019 and provided with insulation EL-IN-EF-48\\"Fa) 48\\" Electric fan 1200mm sweep |
| 20 | PA-IN-PEP-OW W P) Painting old walls two coats with ready mixed plastic emulsion paint of first class quality paint of approved colour and shade for outer wall and other similar works with priming coat through scrapping including cost of necessary brushes, labour charges, patty etc. |
| 21 | JN-GP-PHG-Tk) Supplying and fixing of following thick pin headed Glass panels with aluminium anodised ‘U’ shape beeding of size 12x12mm with 107 gram in average weight for 1m length with aluminium bolts and nuts for the shutters of the steel windows already supplied to suit all the size and as directed by the departmental officers.JN-GP-PHG-4mmb. 4mm thick |
| 22 | PA-CE-WW-SL 2C) White washing Two coat using clean shell lime slaked including cost of lime, gum, blue, brushes, including scaffolding, thorough scrapping and washing with soap, soda water etc., complete in all respects. |
| 23 | PA-IN-OWP-2C EP) Painting the old wood work with two coats of approved Ist class synthetic enamel paint including thorough scrapping the old paint using sand paper as required by the departmental officers including cost of material, labour for painting, supplying etc., all complete as directed by the departmental officers. |
| 24 | PA-Ex-OIP-2C EP) Painting the old Iron work and other similar works such as PVC / ASTM Pipes, Kerb Stone and grills with two coats of approved first class synthetic enamel ready mixed paint of approved quality |
| 25 | PA-Ex-PEP-OW W P) Painting old walls two coats with Plastic Exterior emulsion paint of first class quality paint of approved colour and shade for outer wall and other similar works with priming coat through scrapping including cost of necessary brushes, labour charges, patty etc., |
| 26 | CN-F&S-PCS-M20-20/40-(5F)) Providing precast concrete slab for cupboard ward robes shelves, cover slab for chambers, Baffle walls side slabs of boxing around windows and other similar works in Standardised concrete mix M20 CN-F&S-PCS-M20-40II. 40mm thickCN-FB-PCS-M20-40a. In Foundation & basement |
| 27 | CN-F&S-PCS-M20-20/40-(5F)Providing precast concrete slab for cupboard ward robes shelves, cover slab for chambers, Baffle walls side slabs of boxing around windows and other similar works in Standardised concrete mix M20 for the following thickness excluding the cost and fabrication of reinforcement grills but including precasting, moulding, curing, finishing and fixing in position complying with relevant standard specifications etc., complete in the following floors (Measurement will be taken including bearing in wall also)CN-SS-PCS-M20-20I. 20mm thickCN-SS-PCS-M20-20-(GF)a. In Ground floor |
| 28 | CN-SS-PCS-M20-20-(1F)b. In First floor |
| 29 | EL-IN-EF-BH) Supplying and fixing of water tight Bulk head fitting suitable for LED with guard, including ncessary connections, cost of materials etc., all complete and as directed by the departmental officers (the quality of the bulk head fittings should be got approved from the executive engineer before use) |
| 30 | EL-IN-LED.F-TL) Supply and fixing of 4' long 18 W Crystal Glass LED tube Light with ISI mark including cost of all materials twin core flex wire, TW round block and labour charges for fixing in position etc., |
| 31 | EL-IN-LED.F-LB) Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite pattern holder of best approved variety and as directed by the departmental officers.EL-IN-EF-9W)a) 9 watts LED bulb |
| 32 | EL-IN-EF-12W)b) 12 watts LED bulb |
| 33 | EL-EX-EF-SL) Supply and fixing of LED Street lighting luminaries suitable for fixing LED Street Light Fitting with LED (light emitting diode)EL-EX-EF-SL-25W25W LED Street Light Fitting with LED |
| 34 | EL-IN-OEP-PS) Run of main with 2 wires of 1.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990,1.1 kv grade cable with continuous earth by means of 1.5 sq.mm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conformuing to IS: 694/1990,1.1. k.v. grade cable in open wiring 19mm/20mm dia rigid PVC conduit pipe heavy dutywith ISI mark cost of all materials, specials etc., all complete. (Open wiring) |
| 35 | EL-IN-OWR-2x2.5m2) Run of main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990,1.1 kv grade cable with continuous earth by means of 2.5 sq.mm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conformuing to IS: 694/1990,1.1. k.v. grade cable in fully concealed 19mm/20mm dia rigid PVC conduit pipe heavy duty with ISI mark cost of all materials, specials etc., all complete. [Open wrining] |
| 36 | EL-IN-OWR-2x4m2) Run of main with 2 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990,1.1 kv grade cable with surface run by means of 2.5 sq.mm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conformuing to IS: 694/1990,1.1. k.v. grade cable in surface run 19mm/20mm dia rigid PVC conduit pipe heavy duty with ISI mark cost of all materials, specials etc., all complete. (Open wiring) |
| 37 | EL-IN-OWP-4x4m2 ) Supply and Run off main with 4 wires of 4 sq.mm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conforming to IS: 694/1990, 1.1 KV grade cable with continuous earth by means of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conforming to IS: 694/1990, 1.1 KV grade / cable in fully concealed 25mm dia rigid PVC conduit pipe heavy duty with ISI mark including cost of materials, specials etc., [Open wrining] |
| 38 | FA-HC-M-POC) Hire charges for deploying earth moving machinery (JCB/Poclain) for cleaning the site area including cost of operating charge , fule with necessary amenities ect.,, |
| 39 | RE-RTS-Fe-NC) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry) of all diameters for reinforcement for all floors including cost of binding wire, bending tying etc., |
| 40 | EW-AS-NC-IR) Earth work excavation for foundation in all soils and sub-soils to the required depth as may be directed except in hard rock requiring blasting but inclusive of shoring, strutting, and bailing out water wherever necessary and refilling the sides of foundation with excavated earth in 150mm thick layers.EW-AS-NC-IR-2ma) 0 to 2m depth. |
| 41 | CN-FB-PCC-1:5:10) Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and basement using 40 mm gauge hard broken stone jelly inclusive of shoring, strutting and bailing out water wherever necessary ramming, curing etc., |
| 42 | BW-FB-FLB-CM 1:5) Brick work in cement mortar 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in foundation and basement including dewatering wherever necessary proper setting, curing etc., |
| 43 | CN-F&S-RCC-M20) Providing and laying in position, Standardised Concrete Mix M-20 Grade in a accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for the all RCC items of worksCN-FB-RCC-M20a. In Foundation and basement |
| 44 | BW-PW 110mm-FLB-CM 1:4) Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mmBW-PW 110mm FB-FLB-CM 1:4a. In Foundation and basement |
| 45 | FW-FW-WOS-RCC) Providing Form work and centering for reinforced cement concrete works including supports and strutting up to 3.30m heightFW-FB-WOS-FBa. For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc., |
| 46 | FW-SS-WS-PS) b.Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works |
| 47 | PL-OU-CM 1:5-12mm) Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick |
| 48 | DW-C-CPC-RS) Chipping of concrete and roughening the surface including all tools and plants required etc. all complete as per relevant standard specifications and as directed by the departmental officers. |
| 49 | PL-CL-CM 1:3-10mm thick) Special ceiling plastering in cement mortar 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick |
| 50 | PL-WPC-CM 1:3-12mm) Plastering in cm 1:3 (one of cement and three of crushed stone sand (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm tk. mixed with water proof compound at 2% by weight of cement for sump including scaffolding curing, finishing etc., |
| 51 | PA-CE-WW-SL 3C) White washing three coats using clean shell lime slaked including cost of lime, gum, blue, brushes, including scaffolding etc., complete in all respects. |
| 52 | PA-Ex-EEP-2C BPC) Painting the new walls with two coats of approved best Exterior Emulsion paint |
| 53 | Clean removal of the old cement plastering both inside and outside from the existing walls of brick masonry and racking out joints to 20mm deep without damaging the existing structure and surroundings and clearing the debris away from the site including cost of required tools and plant and necessary scaffolding if necessary etc., |
| 54 | PA-IN-PEP-2C BPC) Painting the false ceilling / New walls with two coats of 1st class ready mixed PLASTIC EMULSION PAINT |
| 55 | EW-AS-OC-ER) Earth work excavation for Open Foundation in all soils and sub-soils to the required depth as may be directed except in hard rock requiring blasting, inclusive of shoring, strutting and bailing out water wherever necessary.EW-AS-OC-ER-2m)a) 0 to 2m depth. |
| 56 | EW-AS-OC-ER-3m)b) 2 to 3m depth. |
| 57 | FL-FB-GR) supplying and filling in foundation and basement with gravel in layers of 150 mm thickness well watered, rammed and consolidated complying with relevant standard specifications including cost of supplying gravel and as directed by the departmental officers. |
| 58 | FL-FB-SCS)supplying and filling in foundation and basement with filling crushed stone sand in layers of 150 mm thickness well watered, rammed and consolidated complying with relevant standard specification including cost of supplying filling crushed stone sand. |
| 59 | FL-FB-HBSJ-40mm) Supplying and filling with 40mm size Hard broken stone jelly in foundation and basement and other similar works including cost of materials, labour charges, etc., |
| 60 | FL-FB-HBSJ-20mm) Supplying and filling with 20mm size Hard broken stone jelly in foundation and basement and other similar works including cost of materials, Labour charges etc., |
| 61 | CN-FB-PCC-1:2:4) Plain cement concrete 1:2:4 (One of cement two of crushed stone sand and four of Hard Broken Stone jelly) (including Mortar Plasticizer (Liquid) at 200ml per bag) using 20mm gauge hard broken stone jelly |
| 62 | CN-FB-PCC-1:8:16) Plain cement concrete 1:8:16 (One of cement, eight of crushed stone sand and sixteen of broken brick jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and other similar works using 20mm gauge broken Brick Jelly |
| 63 | PL-FL-CM 1:4-20mm) Plastering the top of flooring in cm 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick |
| 64 | PL-IN-CM 1:4-12mm) Plastering with CM 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick |
| 65 | SA-IN-VSC-PVC) Supplying and fixing the following dia PVC(SWR) pipe with ISI mark confirming to IS 13952:1992- type `A` with PVC cowl and relevant specials confirming to IS 14735 including jointing with seal ring confirming to IS 5382 with leaving a gap 10mma) 110mm dia PVC SWR pipe of 3metre with required PVC cowl & PVC specials etc., all complete. |
| 66 | SA-Ex-SN8-Dia) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003, superior variety and tested with water, including necessary earth work excavation for trenches and refilling the same, well rammed and consolidated after the pipes are jointed and laid to proper gradiant to the alignment as directed by the departmental officers. SA-Ex-SN8-110a. 110 mm UPVC Non Pressure pipe |
| 67 | SA-Ex-SN8-160) b. 160 mm UPVC Non Pressure pipe |
| 68 | SA-Ex-PVC T-Dia) Supplying and fixing of following dia PVC Equal teeSA-Ex-PVC T-110a. 110 mm dia PVC Equal Tee |
| 69 | SA-Ex-SFRC-S) Supply and delivery at site and fixing of SFRC manhole cover with frame with locking arrangement of clear opening heavy duty with 35 Ton capacity including of all cost etc., all completed and as directed by the departmental officers.SA-Ex-SFRC-750 x 750c. 750 mm x 750 mm |
| 70 | CN-FPS-1:3:6-50mm) Supplying and fixing of fibre mixed precast slab of 50mm thick of all required shapes made in cement concrete 1:3:6 (one of cement,three of crushed stone sand and six of 20mm hard broken stone jelly including Mortar Plasticizer |
| 71 | DM-R-PT-OC) Dismantling the damaged Pressed Tiles in cement mortar including all tools and plants required etc. all complete as per relevant standard specifications and as directed by the departmental officers. |
| 72 | TL-RO-PT-CM 1:3) Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in CM 1:3 (One of cement and three of crushed stone sand including Mortar Plasticize |
| 73 | Providing one coat of Fosroc Nitocote AW primer and Two coats of Fosroc Brushbond roof guard high fiber reinforcement acrylic single component water proofing coating over the primer surface area ones dries up one after another coat complete neat finish for pressed tiles etc., |
| 74 | DW-D-W-F) Removing the damaged Doors and Windows including removal of frames, hinges and fastenings including all accessories without affecting the adjacent structures |
| 75 | MW-MS-GR) Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure or gate including one coat of primer and labour for fixing in position etc. all complete |
| 76 | PA-Ex-IW-2C EP) Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats of approved first class synthetic enamel ready mixed paint of approved quality and brand, the paint should be supplied by the contractor at his own cost. |
| 77 | BW-MW-FLB-CM 1:6)Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mmBW-SS-FLB-CM 1:6-(2F)d. In Second floor |
| 78 | DW-INT/EXT-EL-RE-F-5 Amp3 Pin) Supply and fixing of 5 Amps (Flush type) Switch by removing existing fittings including cost of material, labour charges for fixing with required screws , hire charges for tools and plants etc. |
| 79 | DW-INT/EXT-CM-RE-F-Hyl) Supply and fixing of 3mm thick hylem sheet by removing existing fittings including cost of material, labour charges for fixing with required screws , hire charges for tools and plants etc., |
| 80 | DW-INT/EXT-CM-RE-F-5 Amp3 Pin) Supply and fixing of 5amps 3pin & 2pin Combined Flush type wall Socket by removing existing fittings including cost of material, labour charges for fixing with required screws , hire charges for tools and plants etc., |
| 81 | Supply & fixing of Ceiling rose including cost of material, labour charges for fixing with required screws etc.,all complete |
| 82 | Supplying and fixing of Battern type bakelite holder for lamp with ISI mark including cost of material, labour charges for fixing with required screws etc.,all complete |
| 83 | DW-INT/EXT-EL-RE-F-5 Amp3 Pin) Supply and fixing of 5 Amps (Flush type) Switch by removing existing fittings including cost of material, labour charges for fixing with required screws , hire charges for tools and plants etc |
| 84 | EL-IN-EF-ELCB) Supplying and fixing single phase 40 amps Earth Leakage Circuit Breaker/Residual Current Circuit Breaker (ELCB/ RCCB) 30 milli Amps Double pole (MCB and ELCB/RCCB should be of same manufacture). (Fixed in the existing Board) etc., |
| 85 | WS-EX-RWD-PVC) Supplying and fixing of following dia PVC SWR pipe WS-EX-RWD-110b. 110mm dia PVC SWR pipe. |
| 86 | SA-Ex-SWR P-50) Supplying,laying and concealing the 50mm dia PVC (SWR) pipe |
| 87 | Providing Nitozinc primer coat with two component epoxy zinc rich primer over the prepared reinforcement bars after mixing the base and hardner mechanically using heavy duty slow speed stirrer and applying the same using a stiff bristle brush to ensure an unbroken coating. |
| 88 | Providing and fixing of new rods in place of damaged rods using lotfix range of polyester resin based chemical anchors |
| 89 | Providing one coat of rust removal and cleaning the rod using reebaklens RR including cost of material, labour charges etc.,all complete |
| 90 | SA-IN-WB-P) Supplying and fixing of following porcelin wash hand basin , superior variety of size 550x400mm SA-IN-WB-WWOP)b).White without pedastal wash hand basin |
| 91 | EL-EX-LTUG-S&D) Supplying and delivery of following PVC aluminium armoured LTUG cable (PVC aluminium armoured LTUG 1100v grade)EL-EX-LTUG-S&D-3.5C25f). 3.5 core 25 sq.mm. |
| 92 | EL-EX-LC-BG) Labour charges for laying of PVC aluminium armoured LTUG /flat cable in a trench to a depth of 0.75m including earth work excavation, providing sand cushion, brick layer protection and refilling etc., all complete and as Directed by the departmental officers Below Ground level |
| 93 | EL-EX-LC-AG) Labour charges for laying of PVC aluminium armoured LTUG cable / flat cable on post and wall to make good etc., all complete complying with relevant standard specifications and as directed by the departmental officers Above Ground level |
| 94 | EL-IN-EF-FU) Supplying and fixing 1 no of 16 amps 500 volts grade porcelain fuse unit on suitable teakwood plank varnished to be fixed on the top of pole/EB street pole with necessary clamps including cost of all materials etc., EL-IN-EF-1-16aFUa)1 no 16 amps 500 volts grade porcelain fuse unit |
| 95 | EL-IN-EF-1-32aFUb)1 no 32 amps 500 volts grade porcelain fuse unit |
| 96 | WS-IN/EX-P-Dia) supplying and delivery of following dia pipe including cost of all materials of best approved superior quality with isi mark etc WS-IN/EX-GI-BCGI Pipes B ClassWS-IN/EX-GI-40e. 40mm dia GI Pipe |
| 97 | JN-UPVC D-SL-L) Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (UPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. |
| 98 | Labour charges for acid wash cleaning the existing floor and wall tiles area for Bath & toilets including cost of sanitary materials like phenoil, acid, lizol, iron brush and other necessary tools for cleaning etc., |
| 99 | Providing repairs to existing fixed panelled door of size 1.00 x 2.10 including rate for removing supplying and fixing of 1 No of door handle with CP screws 3 nos of 5\\" butt hinges, 2 Nos of 6\\"x½\\" tower bolt, 1 no 10\\" x 5/8\\" aldrop, 1 No Nylon bush 1 No of door stopper and fixing it properly etc., |
| 100 | Repair and renovation work for door and windows from the existing structure and stacking the same carefully for reuse if any in the departmental stores at site of work and as directed by the departmental officers etc., Please Enable Macros to View BoQ information |
