|
| 1 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping,sand papering and preparing the surface smooth including necessary repairs to scratches etc.complete. |
| 2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labourand scaffold etc in all position complete. Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of Chief Engineer will be required |
| 3 | Wall painting by any mechanical or manual means with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound)content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade |
| 4 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, includingcutting the patch in proper shape, raking out joints and preparing plastering the wall surface withwhite cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. |
| 5 | Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 6 | Providing and laying Antiskid floor tiles of anysizes, 12 mm thickness with water absorption lessthan 0.08% and conforming to IS:15622 ofapproved make in all colours and shades, laid on20mm thick cement mortar 1:4 (1 cement : 4 sand)including grouting the joints with white cementwith matching pigments etc., complete. |
| 7 | Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, quality/ premium quality in flooring laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete11.78.1- In light shade glossy/ rustic /stain finished11.78.1.1- Size 600X600 mm thickness 9-10 mm |
| 8 | Repair of Door & Window |
| 9 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain andbrass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of jointscomplete as per direction of Engineer-in- Charge.External Work18.7.1- 15 mm nominal outer dia .Pipes |
| 10 | 32 mm nominal outer dia .Pipes. |
| 11 | Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the basesupport for tank |
| 12 | Supplying and drawing single core PVC insulated cable FRLS with copper multi strand conductor ISI marked in existing rigid PVC casing and capping/conduit in surface or concealed as per specification.19.1.1- 1.5 sq. mm. wire19.1.1.1- 1 X 1.5 sq. mm. |
| 13 | 2.5 sq. mm. wire19.1.2.1- 1 X 2.5 sq. mm. |
| 14 | 4.00 sq. mm. wire19.1.3.3-3 X 4.00 sq. mm. |
| 15 | 6.00 sq. mm. wire19.1.4.5- 5 X 6.00 sq. mm. |
| 16 | Rewiring in existing surface/concealed rigid steel/PVC nonmetallic conduit with PVC insulated cable with copper multi strand conductor FRLS of ISI marked and other materials as required including replacement of wornout/damaged/missing material, painting etc. complete as per specification. This shall include all work, arrangement required for wiring but shall exclude switch, ceiling rose, fitting etc.Light/fan/3 Pin 6 Amp socket outlet on separate board/call bell/buzzer points :-24.1.1.1- Short point |
| 17 | Medium point |
| 18 | Long point |
| 19 | Circuit wiring24.1.3.2- 2 X 2.5 sq. mm. |
| 20 | Supply & fixing of I.S.I.marked Porecelain Rewireable fuse unit of approved make or confirming to I.S.S. 2086-198225.16.5- 100 Amps /415 Volts |
| 21 | Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of 'C' series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC: 60898 :2002 & 60947-2 but without enclosures :-27.8.1- Single pole27.8.1.2- MCB SP 6Amp to 32Amp 10kA rating |
| 22 | Supplying of MCB Isolators suitable for 240/415 Volts, 50 Hz AC supply with kA value rating 10 kA of approved make conforming to IS:13947-Part III :1993 & IEC:60947- 3:2001 (without enclosures ) :-27.10.4- Four pole27.10.4.2- Current rating upto 63Amp |
| 23 | Fixing of MCB/MCCB/Isolator in sheet steel enclosure as required as per accepted practice, including mounting on busbar and cable connection etc. complete (labour only)28.4.1- MCB/Isolator SP/DP |
| 24 | MCB/MCCB Isolator TP/TPN/FP |
| 25 | Supply and fixing as per specification call bell/buzzer of approved make with necessary materials complete.29.3.4- Multi sound bell |
| 26 | Remote/cordless bell |
| 27 | Supply and fixing in position LED lamp of approved make29.7.8- 18 Watt250Volt |
| 28 | Supply and fixing of approved make step type modular electronic fan regulator including connection etc. as required on existing board29.25.2-100 Watt(2 module) |
| 29 | Supplying, erection and testing of approved make electric Ceiling fan of double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250 volts including connections with all necessary material complete of approved as required confirming to IS :374/2019 with upto date amendments.30.1.2- Ceiling Fan (ISI marked)-1200 mm Sweep, with minimum air delivery 210 m³/min and service value ≥ 4.00 as per BEE.. |
| 30 | Supplying, erection and testing of approved make 'Fresh air fan' AC 230-250 volts with connection and including frame bolt/anchor hole fasteners etc. complete finished and as required.30.4.5- 300 mm sweep double ball bearing |
| 31 | Supply and fixing Led tube rod comprising of LED tube with non- integral/integral driver, upto 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with system efficacy> 100 lm/Watt. LED driver PF> 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70. Submission LM 79-08/IS16106 (2012), IEC60598,IEC61347i/c connection wire, testing etc. to complete the job.31.3.3- Tube light LED 1 X 18Watt, Integral i/c batten aluminium body, PC diffuser. |
| 32 | Supply and fixing street light with high power LED of 3 to 6 Watt each on existing bracket assembled on single MCPCB and additional unique peanut lens on each LED, system lumens output with efficacy>120 lm/Watt. luminiare having color temp upto 6500K & 50000 hrs. burning life with minimum @ L 70, The colour rendering index of LED light should be more than 70. Luminiare comprises of driver, PF>0.95 & surge protection 10KV. Housing made of pressure die cast aluminium with heat resistant flat glass, IP65 protection. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347 i/c connection wire, testing etc. to complete the job.31.13.2- 60Watt, color temp 3000-6500k as required. |
| 33 | Earthing with G.I. earth plate 600mm X 600mm X 6mm thick including accessories and providing masonry encloser in cement mortar, cover plate having locking arrangement on the top and G.I. watering pipe 20mm dia 2.7 metre long etc. (but without charcoal or coke and salt) complete as required |
| 34 | Add extra for using salt and charcoal/coke forG.I. plate or copper plate earth electrode as required including excavation and refilling the pit in all type of soil, murrum |
| 35 | Supply and laying 4.0mm (8 SWG) dia. G.I. wire at 0.5 metre below ground level as conductor earth electrode including jointing etc. as required. |
| 36 | Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make.39.3.3- 6.0 sq.mm multi strand |
| 37 | Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 1 core/2 core/3½ core/4 core ISI marked with alu. stranded /solid conductor41.1.10- 4 core armoured41.1.10.6- 50 sq. mm |
| 38 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :17.1.1 - White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. |
| 39 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS :7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :17.2.1- W.C. pan with ISI marked white solid plastic seat and lid |
| 40 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flushpipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required17.7.1- Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. |
| 41 | Providing and fixing CPVC gate valve with knob of approved quality.18.13.2- 32 mm nominal bore |
| 42 | Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation,foundation concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) and inside plasteringwith cement mortar 1:3 (1 cement : 3 sand) 12 mm thickfinished with a floating coat of neat cement complete asper standard design18.19.2- With flyash bricks of 50 kg/cm2 strength |
| 43 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gm, 15 mm nominal bore. |
| 44 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore. |
| 45 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore |
| 46 | Providing and fixing C.P. brass pillar cock approved quality and make conforming to IS: specification. and weighing not less than 650gm, 15 mm nominal bore 125 mm long foam flow. |
| 47 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting andmaking good the walls wherever require :17.11.1- White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 48 | Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. (minimum wall thickness 3.2mm)17.58.1- 75 mm diameter |
| 49 | 20 mm nominal outer dia .Pipes. |
| 50 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes and fittings with onestep CPVC solvent cement and testing of joints completeas per direction of Engineerin- Charge.18.6.1- Internal work - Exposed on wall 18.6.1.4- 32 mm nominal outer dia .Pipes. Please Enable Macros to View BoQ information |
