|
| 1 | Taking down of chowkhat with shutter of any description (without taking off shutters from the frame) area n-exc 1.50 sqm each complete all as specified and directed. |
| 2 | All as per item No 1 here in before but area exc 1.50 Sqm but n-exc 4.0 Sqm each complete all as specified and directed. |
| 3 | Taking down of shutters of any description n-exc 1.0 sqmtr each complete all as specified and directed. |
| 4 | Taking down of shutters of any description exc 1.0 sqmtr but n-exc 2 Sqmtr each |
| 5 | Taking down of shutters of any description exc 1.0 sqmtr but n-exc 2 Sqmtr each and refixing in the same opening after easing & adjusting complete all as specified and directed. |
| 6 | Taking down of shutters of any description n exc 1.0 sqmtr each and refixing in the same opening after easing & adjusting complete all as specified and directed. |
| 7 | Supply & fix pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc completed size of frame 125x60mm made out of 1.25mm Thick mild steel sheets complete all as specified & directed. |
| 8 | Supply & fixing pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc completed size of frame 105x60mm made out of 1.25mm Thick MS sheets complete all as specified & directed. |
| 9 | M&L PCC 1:2:4 type B-1 (using 20 mm graded agg) for hold fast, cooping,pressed steel frame, benching roof kerbs etc . complete all as specified and directed. |
| 10 | Cutting holes in brick walls exc half brick but n.exc one brick built in cement mortar or cement lime mortar and stone walls built in cement/ lime mortar for inserting holdfasts and making good dismantled portion in cement concrete 1:2:4 Type B-1 as required all as specified and directed. |
| 11 | S & F for MS flats for holdfasts for chowkats embedded in walls with concrete all as specified and directed. |
| 12 | S & F for Flush shutters 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 13 | S & F for plain framed panelled shutter 35mm thick with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail at stile as per IS: 1003 Pt-I kiln seasoned and chemically pressure treated all as specified and directed.Make-M/S Choiti Industries Kanpur,M/S Oriental door Mandhan Kanpur, M/S Joinery Manufacturing Co.Kanpur. |
| 14 | S & F for 35mm thick glazed and skelton shutters of 2nd class hardwood open rebated and prepaired to receive glass gauge etc divided into square with edge of sash bars and framing moulded beads for securing glass/wire mesh etc. size of member of shutter as specified in SSR Pt-I section 8 clause 8.24(a) all as specified and directed. |
| 15 | S & F for 30mm thick glazed and skelton shutters of 2nd class hardwood open rebated and prepaired to receive glass gauge etc divided into square with edge of sash bars and framing moulded beads for securing glass/wire mesh etc. size of member of shutter as specified in SSR Pt-I section 8 clause 8.24(a) all as specified and directed. |
| 16 | S & F 300 mm mild steel ,after ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed. |
| 17 | S & F of aluminuim anodised sliding door bolt 250mm long with hasp staple bolt type and fixing clips of sheet etc complete all as specified and directed. |
| 18 | Supply & fix ISI Mark aluminium handles 150 mm long, cast type, anodized complete all as specified & directed. |
| 19 | S & F of aluminium anodised barrel tower bolts of extruded section and fixed of 200mm long all as specified and directed. |
| 20 | S&F Powder coated aluminium frame (minimum thickness of powder coating 50 micron) work for doors, windows ventilators and partitions (Fixed portions) with extruded built up standard tubular section of required size & approved make conforming to IS 733 and 15:1285 fixing with dash fasteners of required dia and size, including necessary filling up the gaps at i.e junctions, Le at top, bottom. and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight. mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 21 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections of required size & approved make conforming to 15 733 and 15:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle. Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Chief. |
| 22 | Supply and fixing 5.5mm thick sheet glass ordianary quality, tinted exceeding 0.50 Sqm in each pane fixed to aluminium frame work with necessary glazing clips/rubber packing/gasket, screws etc complete all as specidied and as directed |
| 23 | S&F 200 mm long Aluminium powder coated tower bolt complete all as specified and directed |
| 24 | S&F 200 mm long Aluminium powder coated handle complete all as specified and directed |
| 25 | S&F 100 mm long Aluminium powder coated handle complete all as specified and directed |
| 26 | S & F of MS work as guard bar/ms flat welded to window frame,door complete all as specified and directed. |
| 27 | Supply and fixing in repair of ACP sheet fixed to aluminium frame work with necessary glazing clips/rubber packing/gasket, screws etc complete all as specidied and as directed |
| 28 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening as per specification & drawing.Make-M/S Rajshree ind Ltd,M/S Syntex Ltd. |
| 29 | S&F Factory made solid panel PVC door sutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, & bottom rail, lock rail & bottom rail on either side & as gap insert for top rail & colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined to gether with solvent cement suppling & fixing in the frame at site as per specification & drawing.Make-M/S Rajshree Ind Ltd,M/S Syntex Ltd. |
| 30 | S & F factory made glazed and skeleton WPC door shutter 30mm thick solid plain of required size comprising of virgin polymer of K value 58-60(Suspension grade), calcium carbonate and natural fibres(wood powder/rice husk/wheat husk) and non toxic additives made from Extrusion process WPC foam sheet single Extruded (inner) with density not less than 650 kg/cum manufactured by Rajshri an ISO E9001-2015 certified company having good screw holding capacity (screw withdrawl strength of 2000N Face & 1000N Edge, minimum compressive strength 50N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof, Fire retardant and fixing with S.S butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws all as per direction of Engineer-in- Charge. |
| 31 | S & F of aluminium anodised barrel tower bolts of extruded section and fixed of 150mm long all as specified and directed. |
| 32 | Supply & fix ISI Mark aluminium handles 100 mm long, cast type, anodized complete all as specified & directed. |
| 33 | S & F 100 mm long butt hinges,extruded aluminium alloy ISI marked competed all as specified and directed. |
| 34 | Running welding in repairs n. exc. 2.5cm in length and thickness of metal to be welded n. exc. 6mm complete all as specified and directed. |
| 35 | S & F in repair floor door stopper 150mm of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor all as specified and directed. |
| 36 | S & F of stainless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40mm fixed with tinned tacks or stainless steel wire staple all as specified and directed. |
| 37 | S & F in repairs of stanless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40mm fixed with tinned tacks or stainless steen wire staple all as specified and directed. |
| 38 | Hacking out old broken glasses (any thickness) size quality or description from wooden/steel frame all as specified and directed. |
| 39 | S & F for 3mm thick sheet glass ordinary quality and glazing with oil putty/or by beading in square n-exc 0.50 sqm in each pane |
| 40 | Taking down aluminium doors of any description and any size and refixing in the same opening after making necessary repairs to the small parts like beading, alignment of door closer, cleats etc complete all as specified and directed. |
| 41 | Taking down aluminium windows of any description and any size and refixing in the same opening after making necessary repairs to the small parts like beading, alignment of door closer, cleats etc complete all as specified and directed. |
| 42 | S & F in repairs door closer hydraulically regulated, Aluminium body (die cast body) designation No. 2 universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 35 to 60 kg and fixed in repairs complete all as specified and directed. Make : Godrej , Sandhu, Ozone etc |
| 43 | S&F vitrified ceramic coloured (light shade) tiles 10mm thick (square/ rectangular) polished, area of each tile n exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed in CM 1:6 including dismantling complete all as specified and as directed. |
| 44 | Preparation of new wood surface and applying two coat of synthetic enamel paint over a coat of pink primer over 10 cm width or girth all as specified and directed. |
| 45 | Preparation of new steel surface or previously untreated surfaces and applying two coat of sythetic enamel paint over a coat of red oxide over 10 cm widith or girth complete all as specified and directed. |
| 46 | Taking down plaster on brick wall including raking out joints,hacking for key,scrubbing down with water etc. all as specified and directed. |
| 47 | M&L 15mm thick rendering in CM 1:6 on brick /conc surfaces even and smooth without using extra cement as in window/door jams etc. all as specified and directed. |
| 48 | M & L for prepration of new plastered or unplastered surfaces of wall applying two coats of oil bound distemper complete all as specified and directed. |
| 49 | M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed Please Enable Macros to View BoQ information |
