|
| 1 | LAN and PA system |
| 2 | OD324786/2025-2026:Supply and installation of 16W PA wall speakers with mounting bracket and all hardware accessories having Power taps :16W/8W/4W on 100V, low impedance:8ohm, Frequency Response :85Hz-20KHz , Sound pressure level : 86dB , Warranty -3 years, Approved Make : Ahuja PS-400T, Studio master or equivalent |
| 3 | OD321532/2025-2026:SITC of 120W Mixer Amplifier with digital player with features: 5 mics and 2 AUX inputs, 160W Max and 120W RMS, Frequency response-50Hz to 15KHz +/_ 3dB, Bass and treble control, Output-4ohm, 8ohm,16ohm 70V and 100V, operating at 24V DC and AC, MP3 player with USB, SD and MMC card reader and remote controller. Warranty: 3 Years, Approved Make: Ahuja SSB-120 DPM or Equivalent |
| 4 | OD321539/2025-2026:Supply and installation of unidirectional Dynamic Microphone Frequency Response 50- 16,000Hz, Sensitivity 2mV/Pa, Impedance 300 ohm. With 3 pin XLR connector ; 10 meter low noise shielded 2 core Mic cable. Warranty-3 years, Approved Make : Ahuja ASM-780XLR or equivalent |
| 5 | OD321537/2025-2026:Supply of good quality 10m twin core shielded low noise Microphone cable connected with balanced gold plated (M to F) connectors suitable for the microphone, and 1 unit of audio cable with a connector to connect to the mobile phone. |
| 6 | OD321538/2025-2026:Supply of Microphone floor stand that employ sturdy mechanism ensuring trouble free movement and positioning of microphones. Approved Make : Ahuja DGN or equivalent |
| 7 | OD328107/2025-2026:Supply and installation of Dual UHF Wireless microphone system consisting of two high quality handheld , frequency response 50-16000Hz and receiver workable on 220-240v AC, Microphone workable on DC battery. Warranty-3Years, Approved Make: Ahuja AWM-700U2 or equivalent |
| 8 | OD321533/2025-2026:Supply and drawing of standard graded speaker cable(2 core*1 sq.mm) through the existing conduit and giving connections as required. Approved Make: Havells/Finolex/ RR Kabel |
| 9 | OD324697/2025-2026:Supply and Installation of 6U Wall Mount Rack for amplifier having the features of, 550mm depth, Front Glass Door (tinted, Toughened) with Lock & Key, one unit of cantilever shelf , Welded Side Walls With Metal Engraved Logo, Standard Accessories, , 4 Socket 5 Amp minimal. PDU, Approved Make: HCL, Valrack, Netrack, Schneider. |
| 10 | OD324231/2025-2026:Supply and Installation of 4U Wall Mount Rack having the features of, 450mm depth, Front Glass Door (tinted, Toughened) with Lock & Key, 2 pairs of 19 inch Mounting Rails with U-Marking, Welded Side Walls With Metal Engraved Logo, Standard Accessories, 1U Cable Manager, Hardware Packet, 4 Socket 5 Amp minimal. PDU, Roof Mounted Fan Unit / 90 CFM /230V AC, Approved Make: HCL, Valrack, Netrack, Schneider. |
| 11 | OD321614/2025-2026:Supply and installation of 8 port Gigabit unmanaged ethernet rack mountable switch with 8 x 10/100/1000 Gigabit ports , Bandwidth-16 Gbps, Maximum Forwarding Rate 1,448,000 pps, MAC Address Table Size-8K, IEEE 802.3az ,with all necessary accessories, Warranty-3 years, Approved Make-Netgear/D-link/TP Link |
| 12 | OD324281/2025-2026:Supply, Installation, Testing and Commissioning of Cat6 Information Outlets with face plate, Gang box etc having 1000 Mbps with spring shutter front access for connecting nodes on with concealed mounting box consisting of MS cable store, Key stone Jack and having ETL 4 Channel Connector Tested, - Contact Resistance: <20MΩ, Insulation Resistance: >100MΩ Min, - RoHS Compliant, Approved Make: PANDUIT/COMMSCOPE/MOLEX/NEXANS/LEGRAND |
| 13 | OD324279/2025-2026:Supply, installation, testing, and commissioning of UL Listed, ETL verified 3 meter CAT 6 UTP Patch Cord having LSZH jacket, 24 AWG bare copper conductor UTP 4 pair both end factory Crimped with modular male plugs with minimum 500 insertion cycles , Approved Make: Honeywell, Molex, Belden, Actassi, Commscope. |
| 14 | OD352171/2025-2026:Supply, drawing. testing and commissioning of UL certified and ETL verified 23 AWG bare copper conductor UTP 4 pair un-armoured CAT 6 cable with HDPE Insulation Material and LSZH Outer Jacket, conforming to the standards ANSI/TIA-568.2-D, ISO/IEC 11801, IEEE 802.3, ISO/IEC 60332-1,ISO/IEC 61034-2,ISO/IEC 61754-2,Colour Code as per TIA/EIA 568-B, RoHS Compliant, transmission performance tested up to 500 MHz or better and Insertion Loss/ Attenuation: 33 dB/100m or better at250 MHz in the existing conduit as required, Approved Make: Molex , Delton Actassi, Belden, Comscope, Panduit |
| 15 | 1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm Please Enable Macros to View BoQ information |
