|
| 1 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 2 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.For thickness of tiles 10 mm to 25 mm |
| 4 | 12mm Cement plaster of mix:1 : 6 ( 1 cement : 6 fine sand) |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 6 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shadesexcept burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointingin white cement mixed with pigment of matching shade complete. |
| 7 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.In colour such as White, Ivory, Grey, Fume Red Brown |
| 8 | Providing and fixing of PVC panelling for walls and cellings complete job with all fixtures including electrict fittings |
| 9 | Providing and fixing of blind curtain(roller/vertical/venetian type as approved) of good quality fabric/material,complete with all acessories including brackets,channels,operating chain/cord,screws,fasteners and fittings,properly aligned and fixed in position as per direction of Engineer-in-charge |
| 10 | Providing and fixing of good quality curtain with curtain pipes rods (MS/Stell/Aluminium/Brass)with brackets,supports,rings and necessary fitting including installation at site complete job |
| 11 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :150x10 mm |
| 12 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm |
| 13 | Providing and fixing 35mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction ofEngineer-in-charge :Second class Kail wood |
| 14 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Sal wood |
| 15 | Providing and fixing 30mm thick ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st classhard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws |
| 16 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm |
| 17 | Carriage of material by M.T incl loading/unloading & stacking complete |
| 18 | Sand /Stone agg. below 40 mm nominal size avg. lead 05 km by MT |
| 19 | Mulba avg. lead 02 km by MT |
| 20 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 21 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. Brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps. |
| 22 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work-exposed on wall with clamps at 1.00 meter spacing |
| 23 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 24 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 25 | PN-16 pipe , 40mm OD(SDR-7.4) |
| 26 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangular shape 453x357 mm |
| 27 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. Of quality and make as approved by Engineer - in - charge. |
| 28 | Providing and fixing following PVC fitting of appeoved quality as vectus or price |
| 29 | PVC Pipe 100mm dia |
| 30 | PVC Pipe 65mm dia |
| 31 | FLOOR TRAP 110 mm X65mm dia |
| 32 | FLOOR TRAP 100 mm |
| 33 | FLOOR TRAP 65 mm |
| 34 | PVC Plane band 100 mm |
| 35 | Providing and fixing following C.P fitting of approved quality |
| 36 | Sink Mixer |
| 37 | Toilet Paper Holder CP Brass |
| 38 | Wall Shower |
| 39 | Soap Dish |
| 40 | Greting Lock Plane |
| 41 | Greting Lock Hole |
| 42 | Angle Valve |
| 43 | Towel Ring |
| 44 | Towel Rod 24\\" |
| 45 | Supply and Fixing CP Nipple 1/2\\" |
| 46 | Supply and Fixing CP Nipple 1\\" |
| 47 | Supply and Fixing PVC Connection |
| 48 | Supply and Fixing Waste Pipe |
| 49 | Supply and Fixing BAL BAL 32mm |
| 50 | Providing and Installation of following Water Storage Gyser 35 Ltr |
| 51 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 52 | Wiring for light point\fan point\call bell point with 1.5 sq. mm. FRLS PVC insulated copper conductor singel core casbel in furface \recessed medum class pvc conduit with modular switch , modular plate, suitable G.I. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper comnductor singel cabel etc as req. |
| 53 | Wiring for light\power plug with 2x4 sq. mm FRLS PVC insulated copper conductor singel core cabel in surface\recessed medum class PVC conduit aslong with 1 no. 4 sq. mm. PVC FRLS insulated copper conductor singel core cabel in for loop earthing as req. |
| 54 | Wiring for cicuit/ submain wirring alongwith earth wire with the following size of FRLS PVC insulated copper conductor 'singel core cabel in surfacr/ recessed medum class PVC conduit as req |
| 55 | 2x1.5 sq. mm +1x1. sq.mm earth wire |
| 56 | 2x2.5 sq.mm+1x2.5sq.mm earth wire |
| 57 | 2x4.0sq.mm +1x 4.0 sq. mm rarth wire |
| 58 | Supply and drawing following size of FRLS PVC insulated copper conductor 'singel core cabel in surfacr/ recessed medum class PVC conduit as req.1x1.5 sq. Mm |
| 59 | Supply and fixing of follo following size medum class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed comduit as req.25 mm |
| 60 | Supply and fixing following modular switch/socket on the exisitying modular plate & switch box including connections but excluding modular plste etc. as req |
| 61 | 5/6 amp switch |
| 62 | 15/16 A switch |
| 63 | 3 pin 5/6 A socket outlet |
| 64 | 6 pin 15/16 A socket outlet |
| 65 | Supply and fixing two module steped type electronic fan regulator on exisiting modular plate switch box including connection bu excluding modular plate etc as req. |
| 66 | Supply and fixing modular blanking plate on existing modular plate &switch box excluding switch box etc. as,req. |
| 67 | Supply and fixing suitable G.I.box with modular plate and cover in front of surface or in recess, includijng providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch,connection etc as req. |
| 68 | Supply and fixing suitable G.I.box with modular plate and cover in front of surface or in recess, includijng providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and15/16 A modular switch,connection ,painting,etc as req |
| 69 | Supply and fixing suiutable size of GI box with modular plate and cover in forent of surface or in recess,including providing and fixing 2 nos. 5/6 A modular socket outlet and 2 nos. 5/6 A modular swuitch, ,connection etc as rwq. (for light plug to be used in non residential buldings) |
| 70 | Supply and fixing following size/module GI. box alongwith modular base & cover plate for modular switches in recessed etc.as req. |
| 71 | 3 module (100mmx75mm) |
| 72 | Supply and fixing following way,horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V. on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, intreconnection, powder painted including earting etc. as req. ( but without MCB/RCCB/isolator) |
| 73 | 4 way(4 +24) Double Door |
| 74 | Supply and fixing 5 A to 32 A rating, 240/415 V, 10 KA, ''C'' curve ,miniature circuit breaker suitable for inductive load of following pole in exisiting MCB DB complete with connection, teasting and commessoning etc. as req. |
| 75 | Single pole |
| 76 | Single pole and neutral |
| 77 | Supply,Installation , Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal(Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies,shackle kit, safety rope, copper winding, steel/Al body power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required.1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 150 CM/Min (Minimum) |
| 78 | Providing and fixing of IP-20 SMD mid powerLED batten type integrted light fixture made from power coatedExtruded alum. housing with in built driver, complience 2.5 KV surg protected isolated driver, with short and open circuit protection .having efficiency .85% system lumin efficacy of ≥110 lm/ Watt,THD< 10%, PF ≥ 0.95, Cri.80, life time of minimum 50000 Burning Hours with 70% of intial Lumen maintained till life ends, CCT 3000°K/4000°K/5700°k/6000°/6500°K(A per ANSI Bin) , maximum power consumption should not more then the specified rating and fixture shell be of BIS standard and teade mark certificate (T.C) Manufacture word Mark / Name Engraved/Embossing/Screen Printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 &Lm80) certificate /report from OEM shall be submitted. all as per approved by EIC. 20/22 Watt LED 4 feet with min. lumen output (2000-2200) lm |
| 79 | Supply and fixing of following electrical items as req |
| 80 | A/B holder |
| 81 | LED lamp 9 watt |
| 82 | Supply,installation,testing and commessoning of 1500 VA 12V Dc 240V AC inverter with 200Ah 12V Batery |
| 83 | Supply,installation,testing of 1.5 T Hot and Cold inverter type AC with all accessories |
| 84 | Supply,installation of Automatic stablizer for AC (90-240 Voit) copper wound single phase Please Enable Macros to View BoQ information |
