|
| 1 | FIRE FIGHTING PUMPS AND APPURTENANCES: Comprehensive AMC of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : Horizontal End Suction type, Single stage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 2970 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for nclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered with anti vibration pads.as per direction of Engineer-in- charge.(Make:Kirloskar/ Wilo/KSB or equievalant ). 2850 LPM at 88 m Head(75 KW) |
| 2 | Comprehensive AMC of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal End Suction type, Single stage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, Gland Packing conforming to IS 1520. Suitable HP, 2300 RPM, Radiator cooled, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mmthick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. of Engineer-in-charge..(Make:PUMP:KBL/ Grundfos / KSB/Wilo) (Disel Engine: KBL/Greaves cotton). 2850 lpm at 88 m Head (110 HP) |
| 3 | Comprehensive AMC of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Vertical In line , multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 152,4 HP squirell cage IE 3 induction motor ,2900 RPM TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads.(Make:Kirloskar/ Wilo/KSB or equievalant ).180 LPM at 88 Meter Head, |
| 4 | Comprehensive AMC of Flow : 180 lpmHead : 88 mtsAir cushion tank (material IS 2062/2002) with SS air-release valve of approved quality with S.S isolation valve, GM drain valve, gate valve, provision for pressure switches, pressure gauge etc.inside the pump house including making inlet and outlet connection with MS pipe of required length from discharge header to air cushion tank, fixing properly and securing the same to the base etc. complete in all respect having painting including two coats of approved paint over a coat of primer. The tank shall be fabricated out of 8mm thick MS sheet shall be of cylindrical shape with 300mm dia and 1.5m height. The tank shall be installed on suitable vertical legs having M.S. plate of size 75mm x 75mm x 5mm at the bottom. The legs shall be grouted in Cement concrete foundation. Flange connection shall be provided for connection with discharge header. The tank shall be tested at 25 kg/sq.cm before installation. |
| 5 | Comprehensive AMC for 150 mm dial type Pressure gauge of (0-16kg/cm2) range with gun metal shut off cock etc. duly calibrated before installation in MKS and FPS units and fixing the same where required as directed including all fittings, short piece, nipples, elbows testing the joints etc.all complete. (Quantity of this item will be payable only where it has not been included in the relevant composite items). Make-H guru/Fiebig/Equievalant make. |
| 6 | Comprehensive AMC Pressure Switch the most commonly used fluid control components of Aluminum enclouser with storage temprature 40 to 180°F (-40 to 82°C) along with ambient temprature 0 to 160°F (-18 to 71°C),set point shifts less than 1% of range for a 50°F (28°C) ambient temperature change. Unit will operate down to -40°F (-40°C) but with reduced repeatability. Maximum media temperature 200°F (93°C), Shock Set point repeats after 50 G, 10 millisecond duration. Switch output One SPDT including seven electrical terminations; Refer to 'How to Order' and vibration set point repeats after 10 G, 5-500 CPS. Make-Danfos/Indfos/Equievalant make. |
| 7 | Comprehensive AMC of butterfly valves, wafer end type class PN 1.6 as per IS: 13095-1991 or BS: 5155, including necessary nuts, bolts, gaskets etc. complete (without gear box) (Discharge Side).Make-Audco/Leader/Kirloskar/Equievalant make.b) 150mm dia |
| 8 | Comprehensive AMC of UL/approved Cast Iron Non-Return Valves including making flanged joints by providing necessary nuts, bolts, gaskets etc.(Discharge Side).Make Audco/Leader/Kirloskar.b) 150 mm dia |
| 9 | Painting with two coats of Synthetic enamel paint of approved shade and brand over a coat of Red oxide zink chromate primer. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Including painting of legends and direction completed as per the approval of the Engineer- in- charge. a) 25 mm dia |
| 10 | b) 50 mm dia |
| 11 | c) 65 mm dia |
| 12 | d) 150 mm dia |
| 13 | e) 200 mm dia |
| 14 | Comprehensive AMC of Pump Controller for sequential start/stop of dust and vermin proof front operated compartmentalised cubicle type control panel suitable for operation on 415 Volt, 3 ph, 50 c/s power supply with 400 Amp TPN Aluminium busbar fabricated out of 2 mm thick CRCA sheet duly powder coated after treatment in 9 tank process with top entry cable gland plate including interconnections, earth bus as required comprising of :INCOMING: One(1)- 400 Amp 36 KA TPN MCCB with microprocessor release, O/L, S/C and E/f release, Voltmeter with s/s, Ammeter with S/s, 3 Nos 630/5 metering CTs of Class 1.0, ON/ OFF indicating lamps, 3 Nos Phase indicating lamp and 4P 6A MCB OUTGOING: a)Two(2)-250 Amp MCCB, with star delta starter suitable for motor with O/L release, ON/ OFF push button, ON/ OFF indicating lamp, 6 Nos CTs metering CTs 250/5, Ammeter S/S.b) 2 No (Outgoing) – 250 Amp MCCB, with star delta starter suitable for motor with O/L release, ON/ OFF push button, ON/ OFF indicating lamp,3nos 250/5 CT,Ammeter,S/Sc) 1 Set – Relay, Auto/ Manual Selector Switch, Battery Charger, Annunciation Panel, Control wiring of pressure switches, flow switches and starters etc as required for auto and manual operation of Jockey pumps, Main Electric Pumps and Diesel Engine Pump as per direction of Engineer-in-charge.d)1 lot control wiring from pressure switch to panel board through auxiliary contactor with 1.5 sq. mm unarmoured PVC insulated ,PVC sheathed copper cable etc as required.(Make:Utkal/ ASES or equievalant ) |
| 15 | External Piping (Hyd + Spk) - Underground / above ground Pipes Comprehensive AMC of MS pipe (IS:1239/IS:3589) heavy class including cutting, screwing, welding etc. complete with fitting viz. tees elbow, bends, flanges, reducers etc. including providing anti-corrosive treatment (coating and wrapping) with 4 mm thick tape and holiday test check as per IS:10221, 50mm sand filling around the pipe complete as required. All sub soil piping shall be treated as per IS code and refilling shall only be carried out after inspection and permission of the Engineer-in-Charge. FOR UNDERGROUND PIPING.Make-Tata/Jindal/Equievalant make.. A. EXT. HYDRANT PIPING Comprehensive AMC of MS pipe (IS:1239/IS:3589) heavy class including cutting, screwing, welding etc. complete with fitting viz. tees elbow, bends, flanges, reducers etc. After inspection and permission of the Engineer-in-Charge .Make-Tata/Jindal/Equievalant make.. 150 mm dia |
| 16 | Painting with two coats of Synthetic enamel paint of approved shade and brand over a coat of Red oxide zink chromate primer. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Including painting of legends and direction completed as per the approval of the Engineer- in- charge.150 mm dia |
| 17 | 80 mm dia |
| 18 | B. EXT. SPRINKLER PIPING Comprehensive AMC of MS pipe (IS:1239/IS:3589) heavy class including cutting, screwing, welding etc. complete with fitting viz. tees elbow, bends, flanges, reducers etc. including providing anti-corrosive treatment (coating and wrapping) with 4 mm thick tape and holiday test check as per IS:10221, 50mm sand filling around the pipe complete as required. All sub soil piping shall be treated as per IS code and refilling shall only be carried out after inspection and permission of the Engineer-in-Charge. FOR UNDERGROUND PIPING.Make-Tata/Jindal/Equievalant make. 150 mm dia |
| 19 | Comprehensive AMC of courtyard SS metal single headed hydrant valve as per IS: 5290 consisting of 63NB. single outlet flanged oblique type hydrants valve with instantaneous female plunger type coupling, chained blank cap including making flanged joints by providing necessary nuts, bolts, gaskets all complete as per specifications suitable for 80 NB stand post. (as required External).Make-Newage/Safex/Minimax/Equievalant make.. |
| 20 | Comprehensive AMC of proper position Non-percolating flexible hose (RRL type-'A') ISI marked (IS:636) 63 mm dia x 15 M long complete with instantaneous type gunmetal 63 mm dia. IS marked male and female couplings (IS:903) bound and riveted to hose pipe with copper rivets and 1.5 mm copper wire.Make-Newage/Safex/Minimax/Equievalant make.. |
| 21 | Comprehensive AMC of proper position SS 63mm dia short size branch pipes with 20 mm dia nozzles with 63mm instantaneous coupling ISI marked (IS: 903).Make-Newage/Safex/Minimax/Equievalant make.. |
| 22 | Comprehensive AMC of Weather proof hose cabinets for external yard hydrant fabricated from 16 g MS sheet with full glass door and locking arrangement, suitable to accommodate one hydrant valve, 2 nos.15m long hose, 1 No branch pipe. The cabinet shall be painted with one coat of primer and finished stove enamelled \\"Fire Red\\", \\"Fire Hose\\" written on front including suitably mounted on a raised masonry platform as required. (Approx 0.6mx0.6 mx 0.45 m). |
| 23 | Comprehensive AMC of butterfly valves, wafer end type class PN 1.6 as per IS: 13095-1991 or BS: 5155, including necessary nuts, bolts, gaskets etc. complete (without gear box) (Discharge Side).Make Audco/Leader/Kirloskar/Equievalant make..150 mm dia |
| 24 | Comprehensive AMC of Fire Brigade inlet connection with provision for Four male instantaneous coupling fabricated out of 150 mm dia. approved make heavy class MS pipe with non-return valve, Butter Fly valve for fire fighting system including making connection by providing necessary piping & fittings to the fire storage tank, fire fighting wet riser, sprinkler system painting the same with 3 coats of enamel paint over a coat of Zinc Chromate primer all complete as per drawings, specifications. 150 MM DIA.Make-Minimax/Safex/Newage/Equievalant make.. Please Enable Macros to View BoQ information |
| 25 | Comprehensive AMC of Fire Brigade inlet connection with provision for Four male instantaneous coupling fabricated out of 150 mm dia. approved make heavy class MS pipe with non-return valve, Butter Fly valve for fire fighting system including making connection by providing necessary piping & fittings to the fire storage tank, fire fighting wet riser, sprinkler system painting the same with 3 coats of enamel paint over a coat of Zinc Chromate primer all complete as per drawings, specifications. 150 MM DIA.Make-Minimax/Safex/Newage/Equievalant make.. Please Enable Macros to View BoQ information |
