|
| 1 | Earth work in excavation of foundation in hard of soil or gravelly soil with all leads, lifts and delifts including rough dressing and leveling the bed and depositing the excavated earth away from work site with cost of all labours and T&P etc complete as per direction of Engineer-in-charge. |
| 2 | Filling in foundation and plinth with sand well watered and rammed including cost, conveyance, royalty of all materials and cost of all labours and T&P etc. complete as per direction of Engineer-in-charge. |
| 3 | Cement concrete (1: 3 : 6) using hard granite crusher broken stone metal of 40mm.& down graded size of approved quality free from weathered skin and flakes including hoisting, laying and compacting the concrete to required thickness including proper watering, curing to required period with cost, conveyance, royality and taxes of all materials and cost of all labours, T&P etc. complete as per direction of Engineer-in-charge. |
| 4 | Brick work with Fly Ash brick in masonary (1:6) in foundation& Plinth using brick of size 23 x 11 x 8cm having crushing strength not less than 75 kg/cm2 with dimensional tolerance ± 8% including watering, curing to required period with cost, conveyance, royalty and taxes of all materials and cost of labours, T&P etc. complete as per direction of Engineer-in-charge. |
| 5 | Cement concrete (1 : 2 : 4 ) using 12mm. hard granite crusher broken chips of approved quality free from weathered skin and flakes including hoisting, laying and compacting the concrete to required thickness including proper watering, curing to required period with cost of all materials, conveyance, royality and cost of labours, T&P etc.complete as per direction of Engineer-in-charge. |
| 6 | Brick work with Fly Ash brick in masonary (1:6) in superstructure using brick of size 23 x 11 x 8cm having crushing strength not less than 75 kg/cm2 with dimensional tolerance ± 8% including watering, curing to required period with cost of all materials, conveyance, royalty and cost of labours, T&P etc. complete as per direction of Engineer-in-charge. |
| 7 | Providing straightening, cutting, bending, binding, fitting and placing uncoated HYSD bar reinforcement and laying in position including cost of binding wire 18mm to 20mm gauge and fixing of reinforcement including lapping (as per steel code) where necessary spot with cost of all materials, conveyance, and cost of all labours, T&P etc. complete as per direction of Engineer-in-charge. |
| 8 | Rigid smooth centering and shuttering for R.C.C. works including false work and dismenteling the same after casting including cost of all materials, conveyance and cost of all labours, T&P etc. complete as per direction of Engineer-in-charge. (For RCC foundation, Plinth band and footing bases of column, Mass concrete, Precast slab etc.) |
| 9 | Rigid smooth centering and shuttering for R.C.C. works including false work and dismenteling the same after casting including cost of all materials, conveyance and cost of all labours, T&P etc. complete as per direction of Engineer-in-charge. (For RCC beams, Columns, grider and bressmer etc.) |
| 10 | Rigid smooth centering and shuttering for R.C.C. works including false work and dismenteling the same after casting including cost of all materials, conveyance and cost of all labours, T&P etc. complete as per direction of Engineer-in-charge. (For RCC floor and roof slabs, landing, balconies, projection sub-shades and chajja upto 4.30m height) |
| 11 | Reinforcement cement concrete with 20mm down graded hard granite crusher broken chips of approved quality free from weathered skin materials mixing by concrete mixer including hoisting,lowering and laying the concrete in position to proper slope , level and compacting by vibrator in layers not exceeding 0.15m in depth and finished the exposed surface smooth including proper watering, curing to required period with cost of all materials, conveyance, hire and running charges of all machineries, royality and cost of all labours, T&P etc.complete as per direction of Engineer-in-charge. |
| 12 | 12mm. thick cement plaster in C.M. (1 : 6 ) over brick masonary work including racking out joints and watering, curing to required period with cost of all materials, conveyance, royality and cost of all labours, T&P etc. complete as per direction of Engineer-in-charge. |
| 13 | 16mm. thick cement plaster in C.M. (1 : 6 ) over stone masonary work including racking out joints and watering, curing to required period with cost of all materials, conveyance, royality and cost of all labours, T&P etc. complete as per direction of Engineer-in-charge. |
| 14 | Supplying, fitting and fixing vitrified tiles in floor of size 600mm x 600mm Plain of approved make confirming to IS: 13755 laid on 20mm thick cement mortor (1:4) 1 cement,4 sand and filling joints with white cements of approved quality including cost of all materials, conveyance and cost of all labours, T&P etc. complete as per direction of Engineer-in-charge. |
| 15 | Providing & fixing of ceramic tiles (30cm x 30cm., 40cm x 40cm ) in floors, treads on steps and landing on 25mm thick bed of cement molding cement, sand (1 cemen :1 sand) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost of all material, conveyance, royalty and cost of all labours, T&P etc. complete as per direction of Engineer-in-charge. |
| 16 | Providing & fixing of ceramic wall tiles (20cm x 30cm. 20cm x 20cm) in dados / wall / skirting and risers of steps on 12mm thick cement plaster (1 cement : 3 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing with cost of all material, conveyance, royalty and cost of all labours, T&P etc. complete as per direction of Engineer-in-charge. |
| 17 | Supplying, fitting, fixing fully Aluminium door with anodized aluminium door section of 9202 as vertical member 9201 as top 9200 as bottom and middle member with frame section as 9221 with tapered clip No.4660 and the frame to be completed by means of jointing angle No.1855 including cost of all materials, conveyance and cost of all labour, T&P, hire charges of drilling machine etc. complete excluding cost of laminated board as per direction of Engineer-in-charge. |
| 18 | Supplying of M.S. verandah grill / M.S. window grill gates with frame made out M.S.Angle and M.S. Flat confirming to IS: 2062/2006 with painging red-oxide primer as per the design approved by the department including cost of all materials, conveyance, and cost of all labours etc. complete as per direction of Engineer-in-charge. |
| 19 | Labour for fitting and fixing of M.S. door & windows and M.S. gate, M.S. grills gate etc. as per approved design including cost of all fitting materials, conveyance and cost of all labours etc. complete as per direction of the Engineer-in-Charge. |
| 20 | Supply at work site M.S Paneled door double leaved with M.S. framed over all size including frame 1980mm (H) x 1070mm.(W) made out of the following materials confirming to relevant ISS frame 35 x 35 x 6mm. M.S. angle shutter with style top and bottom rail 25 x 25 x 3mm. M.S. angle door panel 1.00mm C.R. sheet, panel stiffener covering width of each leaf with 19 x 5mm. M.S. flat 2 nos. on each leaf. Hinges size 100mm. - 6 nos. ( 3 nos. in each side) brought out as per ISS hold fast 35 x 35 x 6mm. M.S. Angle 175mm. length bifurcated at the tip – 3 nos. on each side handle 19 x 5mm. M.S. flat fabricated 4 nos. aldrop – 2 nos., tower bolt-2 Nos., including cost of all materials, and cost of all labours, fabrication and transportation charges etc. complete as per direction of Engineer-in-charge. (Actual weight of M.S. door to be taken before fixing in position). |
| 21 | Supply at work site M.S. Panelled window double leave shutter with M.S.Frame & Grill over all size lincluding frame-1220mm height x 910mm width made out of the following materials conforming to relevant ISS frame-35x35x6mm M.S.Angle shutter style-top and bottom rail 25x25x3mm M.S. Angle window panel-1.0mm C.R. Sheet panel stiffener covering width of each leaf-19x5mm M.S.Flat 2 nos. lon each leaf. Hinges-size 100mm 4 nos (2 nos.on each side) bought out as per ISS hold fast-35x35x6mm M.S.Angle 100mm length bifurcated tip 2 nos. one each side, Handle-19x5mm M.S.Flat 2 nos. Fabricated (inside). Tower bolt-4 nos. bought out as per ISS Horizontal grills-12mm M.S.Round at 100mm spacing. Approximate weight-39 kg.inclding cost of all materials, cost of all labours, fabrication, transportation charges etc. complete as per direction of Engineer-in-charge.(Actual weight to be measured in kg weight.) |
| 22 | Labour for fitting and fixing of M.S. door & windows and M.S. gate, M.S. grills gate etc. as per approved design including cost of all fitting materials, conveyance and cost of all labours etc. complete as per direction of the Engineer-in-Charge. |
| 23 | Filling in foundation & plinth with excavated earth and well watered and rammed with cost of all materials, conveyance, royalty and cost of all labour, etc. complete as per direction of Engineer-in-charge |
| 24 | Finishing wall surface of walls with acylic wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges including cost of all materials, conveyance and cost of labours, T&P etc. complete as per direction of Engineer-in-charge. |
| 25 | Priming one coat with any approved water bound primer in plaster surface work including cost of all materials, conveyance, and cost of all labours and T&P required for the work etc. complete as per direction of Engineer-in-charge. |
| 26 | Priming one coat with any approved primer in Iron work including cost of all materials, conveyance, and cost of all labours and T&P required for the work etc. complete as per direction of Engineer-in-charge. |
| 27 | Wall Painting two coats with Plastic emulsion paint of approved shade on new or old work to give an even shade including cost of all materials, conveyance and cost of all labours, T&P etc. complete as per direction of Engineer-in-charge. |
| 28 | Finishing wall painting two coats with water proofing weather coat of approved shade on new or old work including cost of all materials, conveyance and cost of all labours, T&P required for the work etc. complete as per direction of Engineer-in-charge. |
| 29 | Providing and laying in trenches PVC Pipes confirming to ASTM-D-785/89(Schedule-80) of the following nominal bore and pipe fittings including testing as per specification complete.(Earth work in trenches to be measured and paid for separtely) |
| 30 | Providing and fixing to wall or ceiling and floor rigid UPVC pipes of class IV (8 Kgf/Cm2) / Class-III (6 Kgf/Cm2) confirming to IS: 4985/2000 of the following nominal bore with clamps and pipe fittings including making good to wall ceiling and floors with cost of all materials , conveyance and cost of all labours etc. complete as per specification and direction of the Engineer-in-charge. |
| 31 | Supplying all materials, labours and T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tank confirming to IS : 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fitting and providing extra sockets & Jam nut including hoisting upto height of 5.00 M & above in ground level and placing the tank to the required position etc. complete including cost of all materials, conveyance and cost of all labours, etc. all complete as per specification & direction of Engineer-in-charge. |
| 32 | Supplying all materials, labour, T&P and fixing Wash Down Water Closet (Procelain A.I.W.C. with S-trap) with integral 'S' or 'P' trap confirming to IS:2556, Part 8- 2004 to the floor with wooden plug and chromium plated screws including jointing the trap with pipe in cement mortar (1:1) all complete with cost of all materials, conveyance, royality and cost of labours, T&P etc.complete as per specification and direction of Engineer-in-charge. (Seat and cover to be meassured and paid separately) |
| 33 | Supplying, fitting and fixing controlled flush low level cistern made of vitreous china confirming to IS: 7774-2004 with all fittings and fixtures all complete including cost of all materials and cost of all labours, T&P etc. complete as per direction of Engineer-in-charge. |
| 34 | Supplying and fixing of bowl pattern urinal confirming to IS: 2556 Part 6-1996 including connecting the urinal of 430 x 260 x 350mm size respectively with waste pipe by means of white lead mixed with chopped hemps including cost of all materials, conveyance and labours, T&P etc. complete as per specification and direction of the Engineer-in-charge. |
| 35 | Supplying all materials, labours and T&P for fixing glazed earthenware squatting plate of size 600 x 350mm confirming to IS: 2556 : Part-6-1995 with integral longitusinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm using cement concrete (1:4:8) uing hard granite metal 40mm nominal size including cost of all materials, conveyance, royality and cost of labours, T&P etc.complete as per specification and direction of Engineer-in-charge. |
| 36 | Fixing pedestal for wash basin complete recessed at the back for the reception of pipe and fitting as per specification including cost of all materials, conveyance and labours T&P etc. complete as per direction of the Engineer-in-charge. |
| 37 | Fixing wash basin with hole for pillar taps confirming to IS:2556 Part 4-2004 with cast irion or M.S. bracket painted white including cutting hole in wall and making good the damages etc.complete as per specification including cost of all materials, conveyance and labours etc. complete as per direction of the Engineer-in-charge. |
| 38 | Supplying all materials, labour, T&P and fixed PVC waste pipe of the following nominal diamter for wash basin and sink including brass check nut including cost of all materials, conveyance and labours, T&P etc complete as per specification and direction of the Engineer-in-charge. |
| 39 | Providing and fixing pillar tap capstan head screw down high pressure lettered \\"Hot and Cold\\" with long screws shanks and back nuts of the following nominal bore as per specification including cost of all materials, conveyance and cost of all labours etc. complete as per direction of Engineer-in-charge. |
| 40 | Fixing 15mm dia PVC inlet connection and making connection with pillar cocks and supply mains for wash basin complete as per specification including cost of all materials , conveyance, and labours etc. complete as per direction of the Engineer-in-charge. |
| 41 | Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plug with chromium plated brass screw and washer including cost of all materials, conveyance and labours etc. complete complete as per specification and direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
