|
| 1 | Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead. |
| 2 | Dismantaling and removing RCC Chajja, Shelves,fins and parapet including stacking the useful materials for re-use and removing the debris with in 50m lead including cost of all labour with T&P etc. complete |
| 3 | Dismantaling & Removing 2.5cm thick artificial stone flooring including stacking the useful materials for re-use and removing the debris with in 50m lead including cost of all labour with T&P etc. complete |
| 4 | Dismantling and removing R.C.C. columns, beams, slab, staircase, landing and lintels including stacking the useful materials for reuse and removing the debris within 50m lead. |
| 5 | Dismantling brick or stone masonry in clay under 3mtr height including stacking the useful materials for reuse and removing the debris within 50m lead. |
| 6 | Dismantaling 2.5cm thick Grading Concrete from roof top including stacking the useful materials for re-use and removing the debris with in 50m lead including cost of all labour with T&P etc. complete |
| 7 | Earth work in excavation of foundation in all kinds of soil with initial lead and lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour, cess and T&P and dewatering if required for the work etc. Complete as directed by the Engineer-in charge (G.F.) |
| 8 | Plinth Protection |
| 9 | Approch Road |
| 10 | Filling in foundation and plinth with excavated earth including watering and remming with all leads & lifts including cost, conveyance, royalty, cess & taxes of all materials & cost of all labour & T&P required for the work complete as per direction of Engineer-in-Charge. |
| 11 | Providing & filling good clean river sand of approved quality including watering to complete saturation & ramming complete including cost conveyance, royalty, Additional charges, DMF @ 10% & EMF @ 5% over the royality, Cess & taxes of all materials & cost of all labour & T&P required for the work etc complete as per specification & direction of Engineer-in Charge. |
| 12 | Plinth Protection |
| 13 | Approch Road |
| 14 | Providing Plain Cement concrete M-15 in foundation upto a required depth below ground level and upto a required height above ground level/bed level using 40mm down graded hard granite aggregates of approved quality from approved quarry including hoisting, lowering, laying compacting in position in layers to proper slope & level including watering, curing and cost, conveyance, Cess, royality, additional charges, DMF 10% & EMF 5% over royalty taxes of all materials etc. with all labour and T&P required for the work including dewatering, shuttering if necessary complete as per direction of Engineer-in Charge. |
| 15 | Plinth Protection |
| 16 | Cement Concrete of proportion (1:3:6) in foundation and floors using 4cm size clean hard black broken granite stone metal (C.B) of approved quality and from approved quarry including hosting lowering and laying concrete in layers not exceeding 15cm thick to the required level ramming, watering and curing etc. complete including cost and conveyance of all materials with all taxes and royalty, additional charges, DMF 10% & EMF 5% over royalty and all labour, cess with T&P required for the work etc. complete including dewatering if required as per direction of the EIC. (G.F.) |
| 17 | Approch Road |
| 18 | RCC of design mix of M-250 grade of controlled qulity having cube strength of 250kg./cm2 in design mix with minimum quantity of cement as specified in IRC Code of 150 mm. cubes at 28 days curing after mixing & tests conducted in accordance with relevant clauses of IS 456/IS 516/IRC 16/1987/IRC-78/1983 using crusher broken hard granite course aggregate of 10 mm. to 20mm. sizes & proportion as specified in clause-302.6.2 of IRC 21/1987, IS-10262 & subject to mix design in conformity with the grading & proportion of different materials for concrete as specified in the relevant codes of approved |
| 19 | quality, obtained from approved quarry & using minimum quantity of cement confirming to codal provision including hoisting, lowering & laying concrete in layers not exceeding 15cm thick compacting with vibrators watering & curing for 28 days including water tight steel centering & shuttering & form works finishing the exposed surface smooth providing beads & grooves, fan hooks wherever necessary including cost, conveyance royalties, additional charges, DMF 10% & EMF 5% over royaltyCess and all other taxes of all materials with all leads & lifts, cost of all labour T&P & machineries etc. required for the work including dewatering if necessary, complete in all respects as per direction of the Engineer-in-Charge but excluding cost, conveyance of tor steel & binding wire & labour charges for straightening, cutting, bending, binding welding & tying the grills lapping spacing etc. where ever necessary & hoisting & placing in position ( to be paid separately as required for RCC works) |
| 20 | Foundation |
| 21 | Plinth Band |
| 22 | Column(G.F.) |
| 23 | Column(F.F.) |
| 24 | Column(Head Room) |
| 25 | Beam(G.F.) |
| 26 | Beam (F.F.) |
| 27 | Beam (Head Room) |
| 28 | Staircase (G.F.) |
| 29 | Staircase (F.F.) |
| 30 | Lintel (G.F.) |
| 31 | Lintel (F.F.) |
| 32 | Lintel (Head Room) |
| 33 | Chajja (G.F.) |
| 34 | Chajja(F.F.) |
| 35 | Chajja (Head Room) |
| 36 | Shelf (G.F.) |
| 37 | Shelf (F.F.) |
| 38 | Roof Slab (G.F.) |
| 39 | Roof Slab (F.F.) |
| 40 | Roof Slab (Head Room) |
| 41 | Supply of HYSD bars confirming to approved grade cutting bending , binding, lapping, splicing, welding etc. (conforming to ISI specification ) & jointing if necessary by lapping & tying the grills & placing in position as required for RCC works as per the approved design, hoisting, lowering & laying position including cost & conveyance, Cess of tor steel & binding wires of 18 to 20 gauge ( as approved by the Deptt. ) etc. complete (Weight of binding wire shall not be considered for payment at all which will be bome by the contractor (standard CO-efficient of different size of the steel shall be considered & welding & lapping should confirm to relevant clause of IRC - 21/1987) as per direction of the Engineer in charge. |
| 42 | Ground Floor |
| 43 | First Floor |
| 44 | Head Room |
| 45 | Flyash brick masonary in cement mortar (1:6) in foundation and plinth and basements and cemental floor bed plinth molding and similar such types of works with all necessary projections using flyash bricks of (25 cm x 12 cm x 8 cm) size having crushing strength not less than 75Kg. Per Sqcm. Including splays, cutting, circular moulding, chamfering corbelling watering curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost, conveyance of all materials and labour, royalty, additional charges, DMF 10% & EMF 5% over royalty cess with T&P required for the work with all taxes and royalties etc. with all T&P complete in all respect as per direction of the Engineer in charge. |
| 46 | Foundation |
| 47 | Ground Floor |
| 48 | First Floor |
| 49 | Head Room |
| 50 | Flyash brick masonary in cement mortar (1:4) in foundation and plinth and basements and cemental floor bed plinth molding and similar such types of works with all necessary projections using flyash bricks of (25 cm x 12 cm x 8 cm) size having crushing strength not less than 75Kg. Per Sqcm. Including splays, cutting, circular moulding, chamfering corbelling watering curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost, conveyance of all materials and labour, royalty, additional charges, DMF 10% & EMF 5% over royalty cess with T&P required for the work with all taxes and royalties etc. with all T&P complete in all respect as per direction of the Engineer in charge. |
| 51 | Ground Floor |
| 52 | First Floor |
| 53 | Providing, fitting and fixing of Antiskid vitrified tile of premium grade having thickness of 8mm to 10mm confirming to IS: 13756 of size (300 x 1200mm) of colour/printed series (homogeneous) of approved quality, colour in dadoos and skatting on 12 mm thick bed of C.M. (1:4) lais in proper slope and gradient with screened and washed sharp sand for mortar and grouted with required quantities of pigments of approved marks to match shades of the vetrified tile if required watering & curing of 21 days including cost, conveyance, royalties, taxes of all materials & labour T&P and cess required for the work etc, complete in all respect as directed by Engineer-In-Charge. Make Johnson / Kajaria / Rak / Ceramic or equivalent |
| 54 | Ground Floor |
| 55 | First Floor |
| 56 | Supplying,fitting & fixing antiskid vetrified tile in dadoos of size 300mm x 1200mm of approved make with application of polymer modified cement based water resistant adhesive bed of required thickness of 10mm & filling joints with epoxy grout of approved quality including cost of all materials labour, Cess, Royalities, Additional charges, DMF @ 10% & EMF @ 5% over the royality and T&P and cess etc, required for the work etc, complete in all respect as per specification and direction of Engineer-in-charge. |
| 57 | Ground Floor |
| 58 | First Floor |
| 59 | Supplying, fitting & fixing of Granite Tiles of minimum above 0.40 sqm (25mm thick) of approved make in floors, trade & Raise of stair case laid on 20 mm thick cement mortar (1:4) and filling joints with slurry including cost, conveyance, royalties, Additional charges, DMF @ 10% & EMF @ 5% over the royality taxes of all materials & labour T&P and cess required for the work etc, complete in all respect as directed by Engineer-In-Charge. |
| 60 | Ground Floor |
| 61 | First Floor |
| 62 | Fixing of Chaukatha with all labour, iron fittings, and wooden hinged cleats etc fitted and fixed complete in all respect including all lifting, cost of all materials, all taxes, labour, T&P etc.complete as per direction of Engineer-in-Charge. |
| 63 | Ground Floor |
| 64 | First Floor |
| 65 | Providing , fitting & fixing of 32mm thick flush door shutter with approved quantity of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved make including cost of all materials, all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-Charge. |
| 66 | Ground Floor |
| 67 | First Floor |
| 68 | Supplying, fitting, fixing up fully glazed aluminium framed window (sliding type) made up aluminium section 9778 as window frame section 4095, 4096 and 9777, 3994 as shutter frame with 5mm black glass as panel lifted with rubber beading including locking arrangement including all fitting including cost all materials, all taxes, labour, T&P euding cost of glass etc complete in all respect as per the direction of Engineer-in-Charge. |
| 69 | Ground Floor |
| 70 | First Floor |
| 71 | Head Room |
| 72 | Supplying & fitting - fixing of 5.5 mm thick hexagonal Aluminium jally in windows as single groove, double groove and tpered clip as horizontal and vertical members for fixing of aluminium jally nd jointing angle conforming to stsndard Aluminium section etc. complete. |
| 73 | Ground Floor |
| 74 | First Floor |
| 75 | Supplying,fitting and fixing of M.S. iron grill & grill gate as per approved design specification size including cost of all materials with cost of conveyance, taxes, Cess etc. but excluding labour as per direction of Engineer-in-Charge. |
| 76 | Ground Floor |
| 77 | First Floor |
| 78 | Supplying,fitting and fixing of double leafed M.S.Shutter for Door as per approved design specification size including cost of all materials with cost of conveyance, taxes, Cess etc. but excluding labour as per direction of Engineer-in-Charge. |
| 79 | Head Room |
| 80 | Labour for fitting and fixing of Window Grill including filling the holes with C.C (1:2:4) etc.complete as per direction of Engineer-in-Charge. |
| 81 | Ground Floor |
| 82 | First Floor |
| 83 | Labour for fitting and fixing of Grill Gate etc.complete as per direction of Engineer-in-Charge. |
| 84 | Ground Floor |
| 85 | Labour for fitting and fixing of double leafed M.S.Shutter etc.complete as per direction of Engineer-in-Charge. |
| 86 | Head Room |
| 87 | 12mm (1/2”) thick cement plaster (1:6) finished smooth to out side brick walls after cracking out of the joint including, watering and curing with cost and conveyance of all materials and labour, cess with T&P required for the work with all taxes and royalties, additional charges, DMF 10% & EMF 5% over royalty, etc. complete in all respect in all floors as per direction of the Engineer in charge. |
| 88 | Ground Floor |
| 89 | First Floor |
| 90 | Head Room |
| 91 | 16mm (5/8\\") thick cement plaster (1:6) finished smooth to inside surface of bricks walls/ stone masonary after racking out joints including watering and curing with cost and conveyance of all materials and labour, cess with T&P required for the work with all taxes and royalities, additional charges, DMF 10% & EMF 5% over royalty etc completed in all respect in all floors as per direction of the Engineer-in-Charge |
| 92 | Ground Floor |
| 93 | First Floor |
| 94 | Head Room |
| 95 | Finishing wall surface with one coats of acrylic putty with cost conveyance and taxes of all materials and labour with T&P and Cess required for the work etc, complete in all respect as per the direction of Engineer-in-Charge. |
| 96 | Ground Floor |
| 97 | First Floor |
| 98 | Head Room |
| 99 | Priming one coat with any approved primer over plaster surface work including cost of primer with sand papering, polishing the surface in all respect with cost, conveyance and taxes of all materials and labour with T&P and CESS required for the work etc. complete in all respect as per direction of Engineer-in-Charge. |
| 100 | Ground Floor |
| 101 | First Floor |
| 102 | Head Room |
| 103 | Wall painting two coats with plastic Emulsion paint of approved quality & shade on new work to give an even shade with brush to interior walls surface after cleaning the surface including cost of plastic emulsion paint with cost, conveyance and taxes of all materials and labour with T&P required for the work with CESS etc complete as per direction of Engineer-in-Charge. |
| 104 | Ground Floor |
| 105 | First Floor |
| 106 | Head Room |
| 107 | Finishing wall surface with two coats of approved quality of weather coat of approved shade over a coat of primer including cost,conveyance, royalities, taxes, cess of all materials, labour, T&P etc.Complete as per direction of Engineer-in-Charge |
| 108 | Ground Floor |
| 109 | First Floor |
| 110 | Head Room |
| 111 | Painting 2 coat with any approved synthetic enamel paint over a coat of primer with brush to wood/iron work including cost, conveyance, taxes of all materials required for the work with all labour, T&P, Cess etc complete in all respect as per specification and direction of Engineer-in-Charge |
| 112 | Ground Floor |
| 113 | First Floor |
| 114 | Head Room |
| 115 | Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P, Cess etc. required for the complete as per specification and direction of E.I.C. |
| 116 | Ground Floor |
| 117 | First Floor |
| 118 | Providing and applying of pre constructional anti-termite treatment by driling 12mm dia holes at distance of 30cm @ junction of wall and floor about 300mm apart deept enough to reach the soil below ^ chemical emulsion (Premise, imidachlopried 30.5 sc of byer make mixed with 47.5ltr water) pumped these holes to soak the soil @ 1 ltr solution of each hole as per manufactures specification & the holes should be pluged the filing materials including cost of all materials, labour, conveyance, T&P all taxes and hire charges of machinaries as per direction of Engineer-in-Charge |
| 119 | Ground Floor |
| 120 | 25mm thick grading concrete (1:2:2) finished smooth on roof slab including, watering and curing with cost and conveyance of all materials and labour, cess with T&P required for the work with all taxes and royalties, DMF (10% over Royality), EMF (5% over Royality), Addl Charges Cess etc. complete in all respect in all floors as per direction of the Engineer in charge. |
| 121 | First Floor |
| 122 | Head Room |
| 123 | Providing cement concerete (1:2:4) nominal mix using 12mm size crusher broken hard granite chips of approved quality obtained from approved quarry including lowering, hoisting & laying in layers not exceeding 150 mm thick each compaction with vibrator, watering and curing for 28 days, centering, shuttering, dewatering if necessary and finishing the exposed surface smooth providing groves and beads where necessary including cost, conveyance royalty, DMF (10% over Royality), EMF (5% over Royality), Addl Charges Cess & other taxes of all materials, labour hire charges of all T&P machineries required for the work complete in all respect as per specification and direction of EIC. |
| 124 | Plinth Protection |
| 125 | Approch Road |
| 126 | Construction of Granular sub-base by providing Close graded Granular Sub-base Grading-III material as per table-400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density including cost, conveyance taxes, royality, additional charges, DMF 10% & EMF 5% over royalty cess complete as per direction of the Engineer in charge |
| 127 | Approch Road |
| 128 | Providing, laying and fixing of factory made chamfered \\"Interlocking Concrete Paver Blocks\\" of M-40 grade & 80mm thick of approved shades confirmed to IS:15658-2006 specification over compacted sand bed course of 40mm laid over the properly graded and finished WBM using sand of gradation confirming to Clause-4.4 & 6.5.1 of IRC:SP-63-2004 with uniform moisture content of 6 to 8 per cent (the sand should not be too wet nor too dry) and spread with the help of screed boares and compacted by Plate Vibrator weighing 0.60tonne or more to acheive a compacted thickness of 40mm & local correction, if any required is to be done either by adding or removing the sand followed by further levelling and compacting and filling the gaps between paver blocks (about 3 to 4mm) with dry sand by brooming (the gradation of the filling dry sand should be as per clauses-6.5.2 of IRC:SP:63-2004) including cost, conveyance, royality, additional charges, DMF 10% & EMF 5% over royalty Cess, taxes & technical specification Clause 1501 and as per direction of Engineer-in-Charge. |
| 129 | Approch Road Please Enable Macros to View BoQ information |
