|
| 1 | Earth work in excavation of foundation trenches in ordinary soil including dressing of sides and levelling the bed and depositing the excavated materials away from the work site within initial lead & lifts etc. complete as directed by the Engineer in charge. |
| 2 | Supplying and filling in foundation and plinth with sand, laying in layers, well watered and rammed including cost, conveyance, royalties and taxes of all materials, cost of all labour and T&P etc. complete in all respect as per direction by the Engineer in charge. |
| 3 | Providing and laying PCC (1:3:6) in foundation and floors using 4cm size crushed stone granite aggregates including laying in layers, ramming, watering and curing etc.complete including cost, conveyance, royalties, taxes of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in-charge. |
| 4 | PCC / RCC work of (1:1.5:3) in all floors floors using 12mm size crushed stone granite aggregates including laying in layers, ramming, watering and curing etc. complete including cost, conveyance, royalties, taxes of all materials and cost of all labours,T&P etc complete as per the direction of the Engineer -in-charge. (Ground Floor) |
| 5 | Fly ash brick masonry in all floors with cement mortar (1:6) using bricks of 25cm size, after immersing Bricks before use with watering, curing etc. complete including cost, conveyance, royalties, taxes of all materials, cost of all labour, all T&P etc. complete in all respect as directed by the Engineer-in-charge.(Foundation) |
| 6 | Ground Floor |
| 7 | 1st Floor |
| 8 | Back Filling of surplus excavated earth at work site by initial lead and lift of 1.50mtr including cost of all labour Tand P required for the work etc. complete as directed by Engineer-In-Charge |
| 9 | R.C.C. work of M.25 in different work using 20 mm & down graded size crushed stone granite aggregates including hoisting lowering, laying concrete and compacting by using vibrators, watering, curing and necessary centring & shuttering for smoth finishing of work excluding steel reinforcement work including cost, conveyance, royalties, taxes of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in -charge. (Column footing) |
| 10 | Plinth Band |
| 11 | Lintel (Ground Floor) |
| 12 | Column Shaft (Ground floor) |
| 13 | Column Shaft (1st floor) |
| 14 | Roof Beam (Ground Floor) |
| 15 | Roof Slab (Ground Floor) |
| 16 | Staircase (Ground floor) |
| 17 | Chajja (Ground Floor) |
| 18 | Fins,parapet & hand rail (Ground floor) |
| 19 | Straightening cutting, bending & binding of bent up or coiled rods confirming to I.S. 432 for Plain and 1785 for Tor steel and binding, tying the grills, hoisting, lowering and placing in proper position including cost, conveyance and taxes of all materials and cost of all labour with all T&P required for the work etc. complete as directed by the Engineer- in-Charge. (Ground Floor) |
| 20 | 1st Floor |
| 21 | Providing 12 mm thick C.P. with C.M. (1:6) on surface of wall with screened and washed sharp sand for mortar and finished smooth including watering and curing with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. Inside and outside surface (Ground Floor) |
| 22 | 1st Floor |
| 23 | Providing 16 mm thick C.P. with C.M. (1:6) on inside surface of wall with screened and washed sharp sand for mortar and finished smooth including watering and curing with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. (Ground Floor) |
| 24 | 1st Floor |
| 25 | Providing 6 mm thick C.P. with C.M. (1:4) on surface of exposed RCC with sand for mortar and finished smooth to RCC work after closed deep chipping & slurry treatment including watering and curing etc complete with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. (Inside & Outside Ground Floor) |
| 26 | Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size crushed stone granite aggregates including laying, watering and curing etc. complete including cost, conveyance, royalties, taxes of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer-in -charge. (Ground Floor) |
| 27 | Supplying, fitting, fixing of Vitrified tiles (60cm x 60cm: colour) in floors over 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. (Ground Floor) |
| 28 | Supplying, fitting, fixing of Vitrified industrial tiles (30cm x 30cm) in floors over 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. (Ground Floor) |
| 29 | Supplying, fitting, fixing of Granite tiles of size above 0.4sqm (Pulished) in floors over 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. |
| 30 | Supplying, fitting, fixing of vetrified tile in all floors over 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. (Ground Floor) |
| 31 | Supplying, fitting, fixing of Granite tiles of size 0.1 to 0.4sqm (Pulished) in dadoo in all floors over 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. (Ground Floor) |
| 32 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 33 | Supplying, fitting and fixing in WPC Door frames of size 115 mm X 55 mm which is in contact with concrete and masonry surface fitted with required W.I. Clamps and required screws of approved quality etc. fixing in CC 1:2:4 including cost, conveyance and taxes of all materials and cost of all labour, sundries, T & P etc. required for all the work complete as per the directions of Engineer -in-charge. |
| 34 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 35 | Providing fitting and fixing G.I. Square bar grill and gate of approved drawing & design including cutting bending the angles and flats to proper sizes welding chamfering etc including cost, conveyance, royalties, taxes of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in -charge. |
| 36 | Supplying, fitting and fixing hand railing of Stainless steel of 304 grade using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, cost of all labour, T&P etc. required for the complete in all respect as per direction of the Engineer-in-charge. |
| 37 | Supplying of M.S. Angle / square bar of approved size, febricatrd to fix GCI sheets on roof etc including cost, conveyance of all materials complete as per the instruction of Engineer-in-Charge . |
| 38 | Supplying, Fitting & Fixing of profile colour Sheet including cost of fittings etc. including cost, conveyance of all materials and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge . |
| 39 | Finishing plastered surfaces with cement washing one coat using cement on plaster / concrete surface including cost, conveyance, taxes of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. (Inside & Outside- Ground Floor) |
| 40 | 1st Floor |
| 41 | Outside surface (1st Floor) |
| 42 | Finishing plastered surfaces with cement putty (water based) of approved make on plaster / concrete surface and finishing the surface smooth and even by sand papering to receive paint in walls, at all heights with staging wherever necessary with cost, conveyance, taxes of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. (Inside & Outside surface- Ground Floor) |
| 43 | Inside surface 1st Floor |
| 44 | Outside surface (1st Floor) |
| 45 | Painting two coats with approved weather seal paints of approved colour, shade on wall surface over a coat of wall primer including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. Outside surface-Ground Floor) |
| 46 | 1st Floor |
| 47 | Painting two coats with distemper over one coat of primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. (Ground Floor) |
| 48 | 1st Floor |
| 49 | Painting two coats with approved enamel paints of approved colour, shade over a coat of primer over new Iron work including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. Ground Floor |
| 50 | 1st Floor |
| 51 | E.I. Work Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex/ L&T/ Anchor/ Polycab/ Havells/ Great white/ RR/ V-Guard/ HPL) 2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia |
| 52 | 2 X 2.5 sq.mm +1 X 1.5 sq.mm -do- |
| 53 | 4 X 4 sq.mm + 1 X 2.5 sq.mm 32 mm dia |
| 54 | Supply and drawing of following sizes FR PVC insulated single core multistrand copper conductor in existing surface/ recessed/ STEEL / PVC conduit as required.1 X 1.5sqmm |
| 55 | S/F of Bakelite angle holder/ batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose . |
| 56 | S/F of Clamp & S.hook |
| 57 | Supply of fixing of 40 mm GI Brackt with 2 nos GI clamp & 4 nos 3'' Anchor fasteners for fixing of street light. |
| 58 | Supply of following PVC Aluminium armoured XLPE cables insulated ISI marked .(Make- Havells/ Polycab/ KEI / V-Guard/ Gloster) 4cx10sqmm |
| 59 | Laying of one number of PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of size not exceeding 25 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required. Laying of cable in ground with protective covering |
| 60 | Laying of cable on surface Laying and fixing of one number of PVC insulated and PVC sheathed/ XLPE power cable of 1.1KV grade of size not exceeding 25 sq.mm on surface as required. |
| 61 | Providing,fixing and laying of fallowing dia PN10 HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. 32mm |
| 62 | Supply and fixing of Different type LED Lights (Make-Havells/ Cromption/ wipro/ panasonic/ Philips) 20 Watt 4' LED tube lights |
| 63 | Supply and fixing of LED round / square recess mounted panel Lights (Make-Havells/ Cromption/ wipro/ panasonic/ Philips) 12 Watt (160 mm x 160 mm) |
| 64 | S/F of Street light- 90W,120 lm/w efficacy , new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) (5Years Warranty) |
| 65 | Supply and fixing of Different type fan (Usha - striker/ Crompton - Super breeze Deco/ Havells - samraat/ Orient - pspo/ Or equivalent) 48\\" Ceilling fan |
| 66 | MCCB encloser (Make - Legrand/ Simens/ Hager/ Schinder) 63A - 160A |
| 67 | Supply and fixing of following different DD DB BOX .(Make-Legrand/ Hager/ Simens/ schneider) 4way TPN Double door DB BOX. |
| 68 | Supply and fixing of 6Amp to 32A rating 240 V/415 V \\"C\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make- Havells/ L&T/ C&S) 6 to 32 SP MCB |
| 69 | 6 to 32 4P MCB |
| 70 | Earthing Supply and fixing of G.I Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary with charcoal and salt as required. |
| 71 | Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing along with existing surface / recessed conduit as required. |
| 72 | Providing and fixing of extra down rod of 20 cm length G.I pipe 20 mm dia heavy gauge including painting etc as required. |
| 73 | Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 6Amp, 250V Modular switch(Legrand mylinc/ Schneider clipsal/Panasonic (vision) ) ISI marked and ceiling rose ISI marked mounted on metal box having front Modular cover of suitable size, metal box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection.(Make of wire-L&T/Anchor/Havells/V-Guard/Great White/HPL) Group-A -L.P- F.P- C.B.P- |
| 74 | Group-B L.P- F.P- C.B.P- |
| 75 | Group-C L.P- F.P- C.B.P- |
| 76 | Supply and fixing of 6Amp plug with 6Amp switch on existing board( Legrand mylinc/ Schneider clipsal/Panasonic (vision) ) |
| 77 | Supply and fixing of Electronics step type Modular fan regulator. ( Legrand mylinc/ Schneider clipsal/Panasonic (vision) ) |
| 78 | S/F of Multipurpose board consisting 1nos. 6Amp plug and switch and 1 Nos 16 A Plug and shocket with all connections ( Legrand mylinc/ Schneider clipsal/Panasonic (vision) ) Please Enable Macros to View BoQ information |
