|
| 1 | Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 sqm each complete all as specified and as directed. |
| 2 | Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 sqm each complete all as specified and as directed. |
| 3 | S & F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 mm X 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm², modules of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with mild steel hold fast/ lugs/stainless steel dash fasteners of required dia and length complete all as specified and as directed. (mild steel hold fast/ lugs or stainless steel dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 4 | S & F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 mm X 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm², modules of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with mild steel hold fast/ lugs/stainless steel dash fasteners of required dia and length complete all as specified and as directed. (mild steel hold fast/ lugs or stainless steel dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 5 | S & F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm², modulus of elasticity 850 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws complete all as specified and as directed. (Note: stainless steel butt hinges and necessary stainless steel screws shall be paid separately.) |
| 6 | All as per item No. 05 Above but wire Mess shutter without frame complete all as specified and as directed. |
| 7 | M&L Providing and fixing factory made uPVC white colour casement (Openable) window /ventilator of Area not exceeding 1.00 sqm each made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm).Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), Butt Hinges of 'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and Wire mesh and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 8 | M&L for joint free anti-skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but n.exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick adhesive and spacer complete all as specified and directed |
| 9 | M & L for joint free glazed ceramic coloured tiles of approved quality in vertical surfaces 600mm X 300 mm x7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10mm thick adhesive and spacer complete all as specified and as directed. |
| 10 | S & F in repair vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ivory/off white (closed pattern including all necessary accessories like rag bolts/gel gasket etc. (excluding flushing cistern & flush pipe) including plastic water closet seat, back closed pattern with flat bottom, cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 11 | S & F in repairs Concealed PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC flushing pipe 32mm dia 900 mm long complete all as specified and as directed. |
| 12 | S&F in repairs Wash basins, Vitreous China (oval type) size 450X 300 mm, including cast iron cantilever bracket, 32 mm Chromium plated waste coupling of fixing of supply and waste pipe/bottle trap complete in all respect as specified. |
| 13 | Taking up or down GI tubing 15 mm bore pipe and connections including cleaning for re-fixing or removal to store complete all as specified. |
| 14 | Taking up or down GI tubing 20 mm bore pipe and connections including cleaning for re-fixing or removal to store complete all as specified. |
| 15 | S&F CPVC pipe of 16mm outer dia SDR 11 and Plain CPVC SDR 11 fittings in trenches and fixed to walls & ceilings or laid in floors, including taking down old one of any type complete all as specified and directed. |
| 16 | S&F CPVC pipe of 20mm outer dia SDR 11 and Plain CPVC SDR 11 fittings in trenches and fixed to walls & ceilings or laid in floors, including taking down old one of any type complete all as specified and directed. |
| 17 | S&F in repairs, 15 mm bore chromium plated fancy type angular stop valve of cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed all as specified. |
| 18 | S&F in repairs, 15 mm bore chromium plated fancy type bib taps cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 19 | S & F in repairs, 15mm bore fancy type chromium plated stop valve cast copper alloy, with long shank & cup (concealed type) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed. |
| 20 | S & F in repairs, brass chromium plated shower rose 70mm dia, with or without swivel joints & and arms, and fixing to pipe & union etc complete all as specified and as directed. |
| 21 | S&F in repairs, PVC waste pipe with socket suitable for connection to Waste fittings of 32/40mm dia, and of length minimum 75 cm complete all as specified and directed. |
| 22 | S & F in repairs, PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and directed. |
| 23 | S&F in repairs, brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed. |
| 24 | S&F chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed. |
| 25 | S & F in repairs, CP grating (with or without waste hole), 125 mm size, fixed on floor/nahani traps etc complete all as specified and as directed. |
| 26 | S & F in repairs, bevelled edge mirror 6 mm thick selected quality glass mounted on walls fixed to chromium plated brass screws and cup washers complete all as specified and directed. |
| 27 | S & F in repairs, 20mm Gun metal globe or Gate valve , with iron wheel , screwed both ends for iron pipe or for unions for 15 mm bore dia of pipe complete all as specified and directed. |
| 28 | S & F in repairs, 25mm Gun metal globe or Gate valve , with iron wheel , screwed both ends for iron pipe or for unions for 15 mm bore dia of pipe complete all as specified and directed. |
| 29 | Supply and fixing in repairs, three layers 1000 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories complete all as specified and directed. |
| 30 | Supply and fixing in repairs, three layers 500 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories complete all as specified and directed. |
| 31 | Supply and fixing in repairs, ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum) complete all as specified and as directed. |
| 32 | Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall, laid in trenches incl all fittings & accessories complete all as specified and as directed. |
| 33 | Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall, laid in trenches incl all fittings & accessories complete all as specified and as directed. |
| 34 | Supply and fixing 110 mm bore PVC (SWR) pipe type -B single socketed in any length with rubber ring joint fixed to walls with MS clamps, including Taking down old AC eaves gutters and rainwater pipes (anysize and pettern), including all fittings, compete all as specified and as directed. |
| 35 | S&F 110 mm bore of pipe PVC (SWR) pipes type - B single socket in any length with rubber ring joint laid in trenches or in floors including taking down old pipe any type and size complete all as specified and directed. |
| 36 | S & F 110mm bore of PVC (SWR) bends and tee with access, type-B of any redius / shoe fixed to PVC pipes complete all as specified and directed. |
| 37 | S & F 110mm bore of PVC (SWR) junction double, (double T), equal or unequal fixed to PVC pipes complete all as specified and directed. |
| 38 | S & F 110mm bore of PVC (SWR) junction single, (Single T), equal or unequal fixed to PVC pipes complete all as specified and directed. |
| 39 | Supply and fixing 75 mm bore PVC (SWR) pipe type -B single socketed in any length with rubber ring joint fixed to walls with MS clamps of F1 25x2mm compete all as specified and as directed. |
| 40 | S & F 75mm bore of PVC (SWR) bends and tee with access, type-B of any redius / shoe fixed to PVC pipes complete all as specified and directed. |
| 41 | S & F 75mm bore of PVC (SWR) junction double, (double T), equal or unequal fixed to PVC pipes complete all as specified and directed. |
| 42 | S & F 75mm bore of PVC (SWR) junction single, (Single T), equal or unequal fixed to PVC pipes complete all as specified and directed. |
| 43 | Supply and fixing in repairs, PVC (SWR) floor trap, 75mm dia with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including CP gratting of suitable size complete all as specified and directed. |
| 44 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specied and directed. |
| 45 | S & F galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised steel wire staples complete all as specified and as directed. |
| 46 | Cutting holes in brick walls built in cement mortar including making good dismantled portion in CM (1:3) or cement concrete (1:2:4) type B-1 exceeding half brick but not exceeding one brick complete all as specified and directed |
| 47 | Cutting chases in brick walls girth exc 10 cm but not exc 20 cm wide for concealed water tubing etc and making good in CM 1:3 or PCC 1:2:4 as required complete all as specified and directed. |
| 48 | M & L for PCC (1:2:4) type B-1, using 20mm graded stone aggregate as in floor surface finished fair 30mm thick below tiles complete all as specified and directed. |
| 49 | M & L for 20 mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over and including 10 mm thick backing in cement mortar 1:4 cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed. |
| 50 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 51 | M&L for rendering 15mm thick in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and as directed |
| 52 | M&L for rendering 15mm thick in cement mortar 1:4 on fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement and with using integral water proofing compound complete all as specified and as directed |
| 53 | M&L for rendering 15mm thick in cement mortar 1:6 on brick surfaces on wall and finished even & smooth without using extra cement complete all as specified and as directed |
| 54 | Material and labour for applying acrylic thick wall care putty on external surfaces of walls / ceiling / soffits ( thickness vary from 1.5 to 2.5mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed.Note:- (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in charge through site order. |
| 55 | M & l for preparation of surfaces and applying two coats of exterior emulsion paint (light shade) with highlighter of any approved shade, @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. |
| 56 | M & L for rendering 5 mm thick on concrete surfaces such as ceiling or soffits of chhajas etc; in CM 1:3 finished even and smooth without using extra cement etc complete all as specified and as directed. |
| 57 | Material and labour for applying three coats of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified and directed. |
| 58 | Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 59 | Water proofing treatment to sunken slab and adjoining vertical surfaces as specified under:- (a) Cleaning of RCC surface to remove dust , loose particles etc with compressed air or any other suitable technique depending on site conditions grinding any sharp edges etc complete all as specified and as directed by engr-in-charge.(b) Supply and apply a glass fibre reinforced modified cementitious coating system (i) Base Coat : HS LATEX plus ( Consumption base coat 0.30kg/Sqm) (ii) Reinforcement : Glass Fibre (iii) Second And Third Coat : HS Latex Shield 2K (consumption Qty 3 Kg/Sqm) System Requirement : density 2.00kg/ltr abd Compressive Strength : 0.5N/mm2 (c) M&L rendering 15 mm thick in cement plaster (1:4) using coarse sand mixed admixed with integral water proofing compound as per manufacturer's instruction trowel even and smooth with steel trowel on sunken surfaces. |
| 60 | M & L for Aerated Autoclaved Concrete (AAC) blocks work according to Indian standerd specification IS : 2185(part-3)-1984 and latest revision built in cement and sand morter 1:6 with Aerated Autoclaved Concrete (AAC) blocks straight or curve on plan exceeding 6mtr mean redius as in sunken floor complete all as specified and directed. |
| 61 | M & L for lead free 12mm thick tiles, (X-ray, gamma-ray and neutron shielding) free from toxic lead, thermally stabled interlockable to avoid radiation lead through the joint, (square/rectangular) polished, area of each tile not less than 0.18 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including laid with 15mm screed bed in CM 1:6 complete all as specified and directed. |
| 62 | M & L for lead free 12mm thick tiles, (X-ray, gamma-ray and neutron shielding) free from toxic lead, thermally stabled interlockable to avoid radiation lead through the joint, (square/rectangular) polished approved quality in vertical surfaces 600mmx300mmx7mm or 450mmx350mmx7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10mm thick plaster in CM 1:4 and including dismantling of old tiles/terrazzo finish etc. complete all as specified and directed. |
| 63 | M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) over 10 mm thick screed in CM 1:4 as in cooking platforms steps, jambs, pillars, window- cills, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including demolition of stone slab/tiles complete all as specified and directed. |
| 64 | M & L for two coats of anti-bacterial and anti-fungal coating, anti-radiation self sterile paint including influding filling of all joints and vaities with epoxy filler (ESSDEE make) and sandedflush to provide a seamless finish including one primer complete all as specified and directed. |
| 65 | Rounding/moulding of to edges (half round) of stone of any description including rubbing and polishing (Granite finish) complete all as specified and directed. |
| 66 | Taking down carefully existing copper/Aluminum point wiring (light,fan, socket or power) complete including fixture and fittings such as switches, bellpushes, ceiling roses, pendents, regulators, sockets, light fitting, callbells etc removiing materials to store for keeping in safe custody or for taking credit(credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. to match existing complete all as specified and directed |
| 67 | M & L for point wiring for one light / fan point controlled by one switch with 2.5 Sqmm PVC insulated, unsheathed multi strand copper conductor cable FR-LSH in and including concealed PVC conduit 20 mm dia heavy duty ISI marked, steel terminal sunken boxes and 3 mm thick phenolic laminated sheet top cover for sunken boxes flush to surface for one light point/fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 2.5 Sqmm copper conductor cable FR-LSH connected to common earth dolly complete including cutting, chasing the surface and then making good the same in CM (1:3) complete all as specified and directed.(Note :- Switches, sockets etc shall be measured and paid for separately under respective items of Schedule). |
| 68 | One light / fan point controlled by one 6 Amps one way switch complete all as specified and directed. |
| 69 | One 3 pin socket outlet 6 Amp same board point complete all as specified and as directed. |
| 70 | One 3 pin socket outlet 5/15 Amp independent board point complete all as specified and as directed. |
| 71 | All as per srl item No. 67 (here-in-before) but for 15/16 Amp socket out let by using 2.5 Sqmm PVC insulated unsheathed copper conductor cable FR-LSH multi strand on independent board including provn of 2.5 Sqmm unsheathed, multi stranded copper conductor cable FR-LSH continues as earth wire connected to earth dolly etc complete in existing conduit all as specified and directed |
| 72 | Note for serial item No 67 to 67.04:-1. Switch(es) & socket(s) shall be measured & paid for separately under respective item of Schedule 'A'. 2. GI boxes/ Modular flush box shall be fixed flush in position with cement mortar (1:4) complete all as directed.3. Taking down old /unserviceable fitting and ficture will be deposit to the AGE E/M Store of GE (south) Bathinda |
| 73 | S & F Modular switch one way 6A, one module single pole complete all as specified and directed. |
| 74 | S & F Modular switch one way 16A, one module single pole complete all as specified and directed. |
| 75 | S & F Modular Socket oultet 6A - 2/3 pin combined 2 module, 230 volt, multipurpose, complete all as specified and directed. |
| 76 | S & F Modular Socket oultet 6/16A - 2/3 pin, 2 module, 230 volt, multipurpose, complete all as specified and directed. |
| 77 | S&F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed. |
| 78 | Supply and fixing in replacement single pole and neatural encolsure with a two pin and earth plug with socket complete with one single pole MCB 20 Amps and 240 Volts complete all as specified and as directed . |
| 79 | S&F wall mounted extruded Aluminium/polycarbonate integrated LED batten fixture with tube 1.2 m, 20watt, 1.2 m 3000/6500K, efficacy not less than 90 lumen/watt, extruded Aluminium/ polycarbonate, PC diffusor and integrated inbuilt drivercomplete including making connection complete all as specified and directed. |
| 80 | S & F wall mountede LED batten fitting 1x10 watt, 6500K, 2ft complete with decorative ultra slim square profile LED lighting fixture with extruded polycarbonate enviroment friendly, energy efficient complete with all light fittings connection complete all as specified and directed. |
| 81 | S&F LED street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrossion resistant complete with IP 65/66 protection including fixing with GI/MS bracket made out of suitable size of light grade tube upto 1.2 mtr length bent to shape with 02 sets of MS clamps made out of minimum 3 mm MS flat iron with suitable bolt and nuts complete with making connection complete allas specified and directed |
| 82 | S&F in replacement sub main two single core PVC copper conductor unsheathed wire multi stranded 6 sqmm along with earth wire 6.0 sqmm copper conductor single core wire connected by common earth in medium grade 25mm size concealed conduit complete all as specified.(Note :- Two lengths of 6.0 sqmm cable and one length of 6.0 sqmm earth cable and one length of 6.0 sqmm earth alongwith 25mm PVC conduit will be measured as one running length) Please Enable Macros to View BoQ information |
| 83 | S&F in replacement sub main two single core PVC copper conductor unsheathed wire multi stranded 6 sqmm along with earth wire 6.0 sqmm copper conductor single core wire connected by common earth in medium grade 25mm size concealed conduit complete all as specified.(Note :- Two lengths of 6.0 sqmm cable and one length of 6.0 sqmm earth cable and one length of 6.0 sqmm earth alongwith 25mm PVC conduit will be measured as one running length) Please Enable Macros to View BoQ information |
