Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-06-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 17-06-2026 |
| 2 | 01-06-2026 | Revised BoQ | BOQ | 10-06-2026 |
| 3 | 01-06-2026 | Date Corrigendum | Date | 10-06-2026 |
| 4 | 01-06-2026 | 2026_MES_766412_1 | Other | 10-06-2026 |
| Sl. No. | Item Description |
| 1 | Demolition of un-reinforced cement concrete any description and in any position including sunken portion, not other wise specially provided for ,complete all as specified and directed. |
| 2 | Demolition of brick tiles or terracing tiles, pointed in cement mortar alongwith cement screed or plaster and removing rubbish etc outide the MOD land complete all as specified and as directed by Engineer-in-Charge. |
| 3 | Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and as directed by Engr-in-Charge. |
| 4 | M&L for 50 mm thick (average thickness) PCC 1:2:4, type B-0 (using 12.5 mm graded stone aggregates) as in levelling course, sub base and roof padding, including mixed with WPC complete all as specified and as directed by Engineer-in-Charge.Note : WPC shall be measured and paid for separately. |
| 5 | M&L for 10 mm thick rendering in CM 1:4 plaster mixed with water proofing compound on roof surfaces including junction of parapets etc., and adjoining vertical surfaces and applying bituminous primer @ 0.40 litres per square meter including APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3 mm thick reinforced with polyester non woven fabric (weight not less than 150 gms/ sqm) laid on primed surface by torch application including cleaning & preparation of surface complete all as specified and as directed by Engineer–in-Charge.Note : WPC shall be measured and paid for separately. |
| 6 | S&F 40mm thick brick tiles laid and jointed and grouted and pointed flush in separate operation in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska laid on CM 1:4, complete all as specified and as directed by Engineer–in-Charge. |
| 7 | All as per serial item No 6 herein before but except tiles, complete all as specified and as directed by Engineer–in-Charge. |
| 8 | Taking down existing plaster of any description on brick wall/ concrete surface including racking out joints, hacking for key, scrubbing down with water etc. |
| 9 | S & F as in repair 25 mm stainless steel curtain rod fixed to bracktes ,incl brackets, finale cap and all fixing arrangement etc complete all as specified and directed. |
| 10 | Cleaning and removing all scale, silt , mud or dirt from overhead water storage tanks of capacity exc 500 litres but n.exc. 1000 litres and mouths or circulating pipes , complete all as directed. |
| 11 | Cleaning and removing all scale, silt , mud or dirt from overhead water storage tanks of capacity exc 100 litres but n.exc. 2000 litres and mouths or circulating pipes , complete all as directed. |
| 12 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar, incl facia of rain water pipe height upto 15 m, including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 13 | M&L for brick work using old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 14 | M&L for Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, for partition wall, parapet in balcony and other similar work built in CM (1:4) complete all as specified and directed. |
| 15 | Material and labour for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces mixed with water proofing compound @3% by wight of cement finishing surface even and smooth without using extra cement complete all as specified and directed. |
| 16 | Supply Only Liquid water proofing compound complete all as specified and as directed by Engineer-in-Charge. |
| 17 | Material and labour for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces even and smooth complete all as specified and directed. |
| 18 | M & L rendering 5 mm thick in cement and sand mortar (1:3) on concrete surfaces (ceiling) finished even and smooth without using extra cement, complete all as specified & directed. |
| 19 | M&L new surface surface of walls for applying Two or more coats of 100% exterior Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified & directed. |
| 20 | M&L for Preparing Newly Plastered Surfaces of external Walls and applying Two Coats of Cement Base Paint over a coat of primer complete all as as specified and as directed. |
| 21 | M&L for Preparing Newly Plastered Surfaces of internal wall and applying two Coats of oil bound distemper over 1 mm thick wall care putty on wall plastered surface complete all as specified and as directed. |
| 22 | Material and labour for preparation of newly plastered surfaces of ceiling including pilasters,cornics etc and applying applying two Coats of oil bound distemper complete as specified and directed |
| 23 | M&L for for prepration of old surface of ceiling and applying one coat of oil bound distemper complete all as specified |
| 24 | M&L for complete removal of existing treatment of surface of walls for applying Two or more coats of 100% exterior Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces, complete all as specified & directed. |
| 25 | M&L for for prepration of old surface of wall and applying one coat of oil bound distemper complete all as specified |
| 26 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl taking down of existing roof sheet, complete all as specified & directed. |
| 27 | S&F of stainless steel hanger with 6 pegs complete all as specified and as directed by Engineer-in-Charge. |
| 28 | M&L for one coats of synthetic enamel paint including preparation of old steel surfaces of any description, over 10cm in width or girth, complete all as specified & directed. |
| 29 | M&L for one coat of synthetic enamel paint including preparation of old painted wooden surfaces of any description, over 10cm in width or girth, complete all as specified & directed. |
| 30 | Taking up or down PVC/ GI pipe, 15 mm bore with all fittings and connection complete all as specified and as directed by Engineer-in-charge, complete all as specified & directed. |
| 31 | Supply and fixing of 15mm Tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors omplete all as specified and directed by Engineer-in-Charge. |
| 32 | Taking up or down PVC/ GI pipe, 20 mm bore with all fittings and connection complete all as specified and as directed by Engineer-in-charge. |
| 33 | Fixing only 20mm tubes, any grade, to walls and ceilings or laying in floors complete incl new fittings all as specified and directed by Engineer-in-Charge. |
| 34 | Supply and fixing of 20mm Tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge. |
| 35 | Cutting chases, pinning in, of brick walls or concrete surfaces, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing, etc., and making good, cutting not exceeding 15 cm girth complete all as specified and directed by Engineer-in-Charge. |
| 36 | S&F Vitreous China wash down water closet pan (pedestal pattern) 'P' or 'S' trap, white (excluding flushing cistern) including seat cover & flush pipe fixed to wall & on floor as in repair complete all as specified and as directed by Engineer-in-Charge. |
| 37 | Vitreous china squatting pan \\"orissa\\" pattern, size 580 x 440 mm white, with integral foot rest including 'P' or 'S' trap, flush pipe (excluding flushing cistern) and making good to the floor fixed as in repair complete all as specified & directed by Engineer-in-charge. |
| 38 | PVC valveless, syphonic action type flushing cistern of 10 litre capacity, low level, white with inlet ball valve, float and handle including bracktes, fixed in repair, complete all as specified and as directed by Engineer-in-Charge. |
| 39 | S&F in repairs Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws, complete all as specified & directed. |
| 40 | Supply and fixing of bib taps, brass, fancy type, long body with wall flange, chromium plated, screwed down for iron pipe or for brass ferrule, suitable for 15 mm bore pipe, fixed as in repairs complete all as specified and as directed by Engineer-in-charge. |
| 41 | Supply and fixing in repair two way bib taps, brass (including fixing arrangement of health faucet), fancy type, long body with wall flange, chromium plated with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, suitable for 15 mm bore pipe, fixed, complete all as specified and as directed by Engineer-in-charge. |
| 42 | S&F in repair Vitreous China urinals, half stall, bedding for urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement incl flush pipe, PVC waste pipe, CP jet and Union for discharge pipe complete all as specified and directed. |
| 43 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect, fixed as in repair complete all as specified and directed. |
| 44 | S&F PVC connection 15mm size with PTMT nuts of length 450mm long as in repairs complete all as specified and directed. |
| 45 | S&F wash hand basin, vitreous china, flat back, white, of size 550 x 400 mm with & including SS waste coupling, angle brackets, PVC waste pipe, as in repairs complete all as specified and as directed by Engineer-in-Charge. |
| 46 | S & F of table top wash hand basin with CP swan neck pillar tap including SS waste coupling, PVC waste pipe as in repairs complete all as specified and as directed by Engineer-in-Charge. |
| 47 | Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed. |
| 48 | M & L Plain Cement concrete type C-2, 1:4:8 (40mm graded crushed stone aggregate) as in sub base, surface channels, drains, hard standing etc complete all as specified and directed. |
| 49 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc complete all as specified and directed. |
| 50 | Llooking mirror fancy type decorative pattern of size as per site requirement with selected quality glass 5.5mm thick fixed on 6mm thick plywood with chromium plated brass screws and cup washers or brass CP studs complete all as specified and directed.Make :- Modiguard / Atul |
| 51 | Pillar taps, cast copper alloy fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, suitable for 15 mm bore pipe, fixed in repair, complete all as specified and as directed by Engineer-in-charge. |
| 52 | Angular stop cock, fancy type, cast copper alloy, chromium plated, screwed down, screwed both ends for iron pipe or for union suitable for 15 mm bore pipe, fixed as in repairs complete all as specified and as directed by Engineer-in-charge. |
| 53 | 15mm Stop valves, cast copper alloy, screwed down, high pressure fancy type, chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe or for unions and fixed as in repairs complete all as specified and directed. |
| 54 | Corner Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass, corner shelf, 300 mm radius with chromium plated bracket guard and railing, including fixing at site complete all as specified and directed by Engineer–in-Charge. |
| 55 | S&F in repairs Brass chromium plated shower rose 125mm size including fixing to steel pipe or union complete all as specified and directed. |
| 56 | Stainless steel towel rail, 600 mm long fixed with and including chromium plated brass screws and wooden/ plastic cleats (minimum weight 190 gms), fixed as in repair complete all as specified and as directed by Engineer-in-Charge. |
| 57 | Stainless steel towel ring fixed with and including chromium plated brass screws and wooden/ plastic cleats (minimum weight 90 gms), fixed complete all as specified and as directed by Engineer-in-Charge. |
| 58 | looking mirror of size 600mm x 450mm of selected quality mounted on PVC frame and back fixed to wall with screw and rawl plugs, fixed as in repair complete all as specified and as directed by Engineer-in-Charge. |
| 59 | PVC (SWR) nahani traps/ floor trap 75mm dia with grating including jointing to waste pipe and setting/fixed in cement concrete type B-1 1:2:4 fixed as in repair complete all as specified and directed. |
| 60 | Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets, waste coupling, waste pipe and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, fixed in repair, complete all as specified and directed. |
| 61 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed. |
| 62 | PVC (SWR) pipes single socketed in any length with rubber ring joints of pressure rating 6kgf/cm2 fixed complete to laid in trenches, floor etc, 75mm bore single socketed in any length of pressure rating 6 kgf/cm2 , complete all as specified and directed. Note : (i) Joint of pipe with RCC slab (in case of floor trap/ 'P' trap shall be water sealed with crack repair compounent of Dr fixit or equilent. |
| 63 | Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of pressure rating 6 kgf/cm2 fixed complete to walls, suspended ceilings or in floors etc., 75mm bore, single socketed in any length , fixed to walls with MS/GI clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, complete all as specified and directed. Note : (i) Joint of pipe with RCC slab (in case of floor trap/ 'P' trap shall be water sealed with crack repair compounent of Dr fixit or equilent. |
| 64 | PVC (SWR) pipes single socketed in any length with rubber ring joints of pressure rating 6kgf/cm2 fixed complete to laid in trenches, floor etc, 110mm bore single socketed in any length of pressure rating 6 kgf/cm2 , complete all as specified and directed. Note : (i) Joint of pipe with RCC slab (in case of floor trap/ 'P' trap shall be water sealed with crack repair compounent of Dr fixit or equilent. |
| 65 | PVC (SWR) 110mm pipes single socketed in any length with rubber ring joints fixed to walls of pressure rating 6 kgf/cm2 fixed complete to walls, with MS/GI clamps etc, complete all as specified and directed. Note : (i) Joint of pipe with RCC slab (in case of floor trap/ 'P' trap shall be water sealed with crack repair compounent of Dr fixit or equilent, complete all as specified and directed. |
| 66 | S & F 110 mm bore PVC (SWR) of pressure rating 6 kgf/cm2 ) bends of any radius complete all as specified and directed. |
| 67 | Supply and fixing PVC (SWR) of pressure rating 6 kgf/cm2 ) Junction (single T) equal or unequal for 110 mm bore pipe, fixed as in repair complete all as specified and directed. |
| 68 | S & F 75 mm bore PVC (SWR) of pressure rating 6 kgf/cm2 ) bends of any radius complete all as specified and directed. |
| 69 | Supply and fixing PVC (SWR) of pressure rating 6 kgf/cm2 ) Junction (single T) equal or unequal for 75 mm bore pipe, fixed as in repair complete all as specified and directed. |
| 70 | M&L for fixing in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed by Engr-in-Charge. |
| 71 | M&L 75 mm thick PCC 1:3:6 type C-1 (20 mm graded stone aggs) as in flooring, plinth protection including finishing surfaces even and smooth without using extra cement complete all as specified. Note : 10mm construction joint will be provided and Panel should not be more than 3 m in length and joint filled with filler bitumen and sand in ratio (1:3), complete all as specified and directed. |
| 72 | M&L for PVC (SWR) vent cowl 110 mm, setting and jointing with solvent cement complete all as specified and as directed by Engr-in-Charge. |
| 73 | 500 ltrs rotational moulded polythine water storage tanks( cylinder vertical with closed top) hoisted and fixed in position including 20mm, ball brass valves,high pressure with polythene float and flynut complete screw for iron pipe or brass ferrule all as specified in SSR Part-I incl dismantling of existing tank, complete all as specified and directed. |
| 74 | 1000 ltrs rotational moulded polythine water storage tanks( cylinder vertical with closed top) hoisted and fixed in position including 20mm, ball brass valves,high pressure with polythene float and flynut complete screw for iron pipe or brass ferrule all as specified in SSR Part-I incl dismantling of existing tank, complete all as specified and directed. |
| 75 | 2000 ltrs rotational moulded polythine water storage tanks( cylinder vertical with closed top) hoisted and fixed in position including 20mm ball brass valves,high pressure with polythene float and flynut of suitable size complete screw for iron pipe or brass ferrule all as specified in SSR Part-I incl dismantling of existing tank, complete all as specified and directed. |
| 76 | Single piece EWC (one piece), minimum size 715 x 335 x 715mm, , snow white colour, S-trap with integraed flusing cistern, including slim soft close seat cover , fixed as in repairs, complete all as specified and directed. |
| 77 | Steel rolling shutters (1 mm thickness of lath) with/ without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated complete, gear operated type with bevel gear box and crank handle fixed as in repair complete all as specified and directed. |
| 78 | Steel rolling shutters, (1 mm thickness of lath) with/ without ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type fixed as in repair complete all as specified and directed. |
| 79 | Preparation of new steel surfaces of any description over 10 cm width or grith and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 80 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified & directed by Engineer-in-charge. |
| 81 | Material and labour Powder coated Gl frame work grid 605x 605mm for ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to entre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and hangers 3mm dia GI (up to 1200mm length )adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia ,40mm long complete all as specified and directed. |
| 82 | Material and labour 4mm thick non asbestos fibre cement building boards fixed or laid /inserted to timper /GI/Aluminium frame work with screws fixed in ceiling flat or sloping complete all as specified and directed. |
| 83 | PVC lining coloured or selective pattern, as in repair PVC lining of hollow profile not less than 5mm thick and not less than 250mm wide intelocking type system as in wall/celing linings including end and intermediet U or L PVC sections as per manufacturer instructions including dismantling existing paneling, complete all as specified and directed(Note : Colour/design and pattern shall be as decided by the GE) |
| 84 | S&F in repairs Louvers wall panels with thickness not less than 10mm and not less than 250mm wide intelocking type system as in wall/celing linings including end and intermediet U or L PVC sections as per manufacturer instructions (Note : Colour/design and pattern shall be as decided by the GE) |
| 85 | Dismantaling floor hearth or wall tiling/china moisac including cement mortar bedding (but not backing ) , removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 86 | Glazed ceramic coloured printed tiles in vertical surface of size 450X 350X 7mm thick over nd incl 10 mm thick rendering in CM 1:4 , complete all as specified and directed. |
| 87 | Coloured Non-skid Ceramic tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed by Engineer-in-Charge. |
| 88 | M&L for 75 mm thick PCC 1:3:6, type C-1 (using 20 mm graded crushed stone aggregates) as in sub base, complete all as specified and as directed by Engineer-in-Charge. |
| 89 | M&L for Providing cement concrete 1:2:4, type B-0 (using 12.5 mm graded aggregates) as in roof kerbs or mud stops, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, gola, kneelers, apex stones, bed plates, kerbs including weathering, slightly rounded or chamfered angles and throating on edges complete all as specified and as directed by Engineer-in-Charge. |
| 90 | Taking down chowkhats or frame (with shutter w/o taking off shutter from the frame) area not exc 1.5 Sqm each complete all as specified and directed. |
| 91 | Taking down chowkhats or frame (with shutter w/o taking off shutter from the frame) area exc 1.5 but not exc 4.0) Sqm each, complete all as specified and directed. |
| 92 | Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm complete all as specified and directed. |
| 93 | Taking down and re-fixing of shutters of any description exc 1 sqm but n.exc. 2 Sqm each in in same opening after securing or easing & adjusting complete all as specified & directed. |
| 94 | 125 x 60 mm pressed steel frames for doors, windows with one or more rebates incl necessary fixing hinges, lugs, hinges lock, strike plate, hold fasts, Peg etc incl PCC 1:3:6 type-B-1 for back filling of chowkath complete all as specified and as directed by Engineer-in-Charge. |
| 95 | 105 x 60 mm pressed steel frames for doors, windows with one or more rebates incl necessary fixing hinges, lugs, hinges lock, strike plate, hold fasts, Peg etc incl PCC 1:3:6 type-B-1 for back filling of chowkath complete all as specified and as directed by Engineer-in-Charge. |
| 96 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 97 | S & F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part -I,section 8,clause 8.24 (a) complete all as specified and as directed.fitted to chowkhats for doors etc complete. |
| 98 | S&F 30mm Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, etc., complete, as specified, supplied and fixed complete all as specified and directed. |
| 99 | Preparation of New or previously untreated wooden surfaces of any description, two coat Synthetic enamel (ordinary tint) paint over a coat of pink primer not otherwise described, over 10cm width or girth complete all as specified and directed. |
| 100 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 101 | Factorymade solid panel PVC board 20mm to 25mm thick with 2mm thick prelam PVC sheet on the front face & 2mm pelam PVC sheet on back with particle board core fixing in frame at site to cup board shutter, shelves and kitchen cabinet complete all as specified and directed.MAKE: RAJSHREE,ECOCELL OR EQUIVALENT. |
| 102 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flameof Class A category with property of being ermite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges shall be paid separately |
| 103 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified & directed. |
| 104 | Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing complete all as specified and as directed by Eng-in-Charge. |
| 105 | S&F 100mm butt hinges of Stainless Steel hinge pin,Type-B-21 complete all as specified and directed. |
| 106 | S&F of 150 mm long Extruded aluminium alloy handles, fabricated type anodized , |
| 107 | S&F of 150 mm aluminum anodized barrel tower bolts of extruded section, |
| 108 | M&L for Vitrified ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.. |
| 109 | S&F of aluminum alloy, anodized, sliding door bolt 250mm long hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed, complete all as specified and directed. |
| 110 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 111 | S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised 30 mm Width of flaps (when open) complete all as specified and as directed by Engr-in-Charge. |
| 112 | S&F 100mm aluminium Hasp and staple, safety type, with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed by Engr-in-Charge. |
| 113 | S&F magnetic door catcher for cupboard & kitchen cabinet including all fixing arrangement, complete all as specified and as directed by Engr-in-Charge. |
| 114 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons and skirtinngs etc, laid with any type of mortar,complete all as specified and directed. |
| 115 | 20-25 mm thick machine cut kota stone flooring over cement screed base laid and jointed with neat cement slurry mixed with pigment to match the shade of the slab laid over 20 mm thick bedding layer in cement mortar 1:4 including rubbing and polishing complete all as specified |
| 116 | 20-25 mm thick machine cut kota stone as in vertical surfaces risers of steps , skirting, dado and pillars etc set and jointed in neat cement slurry and pointed with grey cement mixed with pigment to match the colour of stone slab laid over and including 10 mm thick rendering in cement mortar 1:4 including rubbing and mirror polishing complete all as specified |
| 117 | Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement-mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite over and incl 15 mm thick screed bed in CM 1:4, complete all as specified |
| 118 | M&L for full body Parking heavy duty tile of size exc 0.09sqm but n exc 0.18sqm with 15 mm thick laid over and incl 15 mm thick screed bed in CM 1:4 incl jointed with neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed. |
| 119 | Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed. |
| 120 | Preperation of new steel surface of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide, zinc chrome primer all as specified and directed. |
| 121 | Powder coated aluminum sections as in frames/ shutter of doors/window/ventilators /partitions, (Sliding / openable/ three track) including joinging cleats, glazing clips, rubber neoprene beading, powder coated aluminim snap beading, screws etc. complete all as specified and directedNote : (i) Minimum thickness of power coating shall not be less than 50 micron.(ii) Weight of aluminum section only shall be measuerd and paid.(iii) Aluminum doors/windows /ventilators to be fixed to jambs with chromium plated screws .(iv) The rate shall be inclusive of neoprene beadings, snap beading, screws etc and in case of sliding shutters locking arrangement and rollers in sliding shutters. Weight of fitting fixtures will not be measured for arriving the weight of aluminum section.(v) Glass /wooden panel/ACP sheet shall be measured and paid separately under respective items.(vi) Design as directed by Engineer in charge. |
| 122 | Supply and fixing 4.80mm thick ordinary quality tinted glass, fixed to aluminum frame work in panels not exc 0.5 Sqm in each pane, complete all as specified & directed. |
| 123 | 4mm thick aluminium composite panel sheet (ACP) fixed with aluminium beading with rubber gasket including all necessary clips and fittings colour as approved by Engr-in-Charge all as specified and directed. |
| 124 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty complete all as specified and directed. |
| 125 | Supply and fixing 4mm thick Sheet glass, ordinary quality, in squares and in any type of frame and glazing with oil putty (or beading) in square n.exc 0.5 Sqm in each panes complete all as specified and directed. |
| 126 | Supply and fixing 4mm thick figured (frosted) glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square n.exc 0.5 Sqm in each panes complete all as specified and directed. |
| 127 | S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, incl all necessary nut bolt, wooden bidding, FI , welding as per site requirement complete all as specified and directed. |
| 128 | Repair to old aluminium door/window including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285 ,(Excluding aluminium material for shutter frame ) fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, including dismantling & refixing of door if required complete all as specified and directed by Engineer-in-Charge.Note : (i) Glass panes and panels shall be measured & paid separately under respective items (If required). |
| 129 | 10-12mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holeswith necessary screws/ beading, rubber packing, L Patch bottom and top, self clossing patch, Top pivot etc complete all as specified and directed. |
| 130 | Cast iron body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed in repair, complete all as specified and directed. |
| 131 | Supply and fixing mortice lock, verticle type, mild steel, 4 levers, size 100mm, brass body, complete all as specified and directed |
| 132 | S&F in repairs door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding complete for door shutters of 851 to 1000mm in width all as specified and directed by Engr-in-charge. |
| 133 | Floor door stopper 140mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and directed. |
| 134 | Stainless steel lock for 10-12mm thick glass door, having knob inside with three keys, satin finish, complete all as specified and directed. |
| 135 | 300 mm long stainless steel handle, fancy type , fixed to toughened glass, complete all as specified and directed. |
| 136 | Supply and fixing Factory made steel window box type with side hung shutters including box type hinges, 125mm steel handle-02 Nos mild steel ISI marked tower bolt 125 mm size (minimum 2 for each shutter) complete with glazing bars, doetailed or welded fixed with and including MS flat of suitable size for fixing grills and guards bars etc and one shop coat of primer including dismantling & removal of old unserviceable window complete all as specified and directed by Engineer-in-Charge. |
| 137 | Supply and fixing Factory made steel window box type with side hung shutters including box type hinges, 125mm steel handle-02 Nos mild steel ISI marked tower bolt 125mm size (minimum 2 for each shutter) complete without glazing bars, dovetailed or welded fixed and one shop coat of primer including dismantling & removal of old unserviceable window complete all as specified and directed by Engineer-in-Charge. |
| 138 | 2mm thick fibre glass reinforced translucent plain coloured sheeting with side lap, fixed with coach screws as in roof, wall etc, fixed as in repair complete all as specified and directed. |
| 139 | Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty , fixed in repairs complete all as specified and directed. |
| 140 | Float valve/ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for 20mm bore pipe (minimum weight 210 gms), fixed as in repairs, complete all as specified and directed. |
| 141 | S&F of 1mm thick plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed, complete all as specified and directed. |
| 142 | Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl taking down, complete all as specified and directed. |
| 143 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, all as directed. |
| 144 | Steel work in tubular trusses and tubular posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 t complete all as specified & directed by Engineer-in-Charge |
| 145 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, complete all as specified and directed. |
| 146 | Repair to RCC sunshades, chajjas, balconies, coloumns, bands, beams and similar RCC work at any position / height by dismantling loose / disintegrated portion including necessary scafolding and safety arrangements and fixing of reinforcement (cut to length, bent to shape required, including cranking, bending spirally including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips)/ chicken wire mesh/ welded wiremesh wherever required and dubbing out with cement concrete 1:1.5:3, 15mm to 50mm thick, using 6 to 12mm graded stone aggregate to make up and finished the required shape including provision of necessary scaffolding and formwork up to four storey bldg if required and finished with 5mm thick rendering in cement mortar 1:4 finished even and fair without using extra cement complete all as specified and directed. (NOTE : Demolition of reinforcement cement concrete, scafolding and GI wire netting will be measured and paid separately under respective items) |
| 147 | Hard drawn steel wire fabric n. exc 4 Kg cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt, complete all as specified and directed. |
| 148 | Erection of mild steel scaffolding, trestles, ladders, cradles, etc. necessary for execution of item Ser No 146 above incl all protective measures for repairs of roof parapet wall, roof chajja/ facia etc upto 15 Mtr ht.Note - Surface are of scafffolding will be measured for payment. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
