|
| 1 | Note:-(a)Please refer schedule 'A' notes before quoting the tender. (b) Amount of Schedule of Credit shall be deducted offline by the Deptt. |
| 2 | GENERAL SUMMARY |
| 3 | Lump sum price worked out by the contractor for BUILDING WORK as listed in Schedule ‘A’ Part- I (Ref prepriced schedule attached seperately) |
| 4 | Lump sum price worked out by the contractor for (INTERNAL WATER SUPPLY & HOT WATER SUPPLY WORKS as listed in Schedule ‘A’ Part- II (Ref prepriced schedule attached seperately) |
| 5 | Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION WORKS as listed in Schedule ‘A’ Part- III (Ref prepriced schedule attached seperately) |
| 6 | Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY WORKS as listed in Schedule ‘A’ Part- IV (Ref prepriced schedule attached seperately) |
| 7 | Lump sum price worked out by the contractor for EXTERNAL ELETRIC SUPPLY AND DG SET WORKS as listed in Schedule ‘A’ Part- V (Ref prepriced schedule attached seperately) |
| 8 | Lump sum price worked out by the contractor for ROAD , HARDSTANDING / PATH AND CULVERT WORKS as listed in Schedule ‘A’ Part- VI (Ref prepriced schedule attached seperately) |
| 9 | Lump sum price worked out by the contractor for LIGHTINING PROTECTION & CHEMICAL EARTHING WORKS as listed in Schedule ‘A’ Part- VII (Ref prepriced schedule attached seperately) |
| 10 | Lump sum price worked out by the contractor for AREA DRAINAGE WORKS as listed in Schedule ‘A’ Part-VIII (Ref prepriced schedule attached seperately) |
| 11 | Lump sum price worked out by the contractor for SEWAGE DISPOSAL WORKS as listed in Schedule ‘A’ Part- IX (Ref prepriced schedule attached seperately) |
| 12 | Lump sum price worked out by the contractor for DEMOLITION AND DISMANTLING WORKS as listed in Schedule ‘A’ Part-X (Ref prepriced schedule attached seperately) |
| 13 | Lump sum price worked out by the contractor for RETAINING WALL WORKS as listed in Schedule ‘A’ Part-XI (Ref prepriced schedule attached seperately) |
| 14 | Lump sum price worked out by the contractor for EXCAVATION, EARTH WORK AND SITE DEVELOPMENT WORKS as listed in Schedule ‘A’ Part-XII (Ref prepriced schedule attached seperately) |
| 15 | SCH 'A' Pt - XIII (MISCELLANEOUS ITEMS) |
| 16 | (INTERNAL WATER SUPPLY & HOT WATER SUPPLY WORKS) NOTE:- For items of (INTERNAL WATER SUPPLY & HOT WATER SUPPLY WORKS) notes given at the beginning of Sch ‘A’ Part-II ( (INTERNAL WATER SUPPLY & HOT WATER SUPPLY WORKS) ) shall also be applicable. |
| 17 | Supply and Fixing Angle cock cum bib tap with flange 15mm bore Stop valve (angle cock) fancy type, cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or fro brass / union ferrule and fixed, complete all as specified & as directed. |
| 18 | Supply and Fixing 15 mm bore , brass cromium plated urinal spreadear for urinals with fittings, complete all as specified & as directed. |
| 19 | Supply and Fixing 15 mm bore, brass cromium plated push cock, with all fittings, complete all as specified & as directed. |
| 20 | Supply & fixing 15 mm bore swan neck brass chromium plated basin mixture with hot & cold connection without pop up waste system with all fittings, , complete all as specified & as directed. |
| 21 | Supply and Fixing 15 mm bore, brass cromium plated elbow operated tap, with all fittings, complete all as specified & as directed. |
| 22 | Supply & fixing pillar cock 15 mm bore swan neck brass chromium plated basin mixture with hot & cold connection without pop up waste system with all fittings, , complete all as specified & as directed. |
| 23 | INTERNAL ELETRIFICATION WORKS NOTE:- For items of INTERNAL ELETRIFICATION WORKS notes given at the beginning of Sch ‘A’ Part-III (INTERNAL ELETRIFICATION WORKS ) shall also be applicable. |
| 24 | Material and Labour for concealed Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with 1.5 Sqmm nominal cross sectional area PVC insulated unsheathed multi-stranded FRLSH copper conductor 1100 volts grade, drawn in and including medium grade, rigid PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), and including modular metal flush boxes concealed with modular natural / white finish front plate with base plate for the mounting of modular switches, sockets and fan regulators etc. etc including 1.5 Sqmm nominal cross sectional area PVC insulated unsheathed multi-stranded FRLSH copper conductor cable as earth continuity conductor to common earth dolly complete all as specified and directed for the following:-NOTE:- The quoted unit rate is deemed to be inclusive of cost of metal flush boxes, modular white cover plates, modular frame plates, etc.However modular switches,sockets and regulators shall be measured and paid seperately under respective items of Schedule'A' BoQ. |
| 25 | One light point point controlled by one 6 amps one way modular switch. |
| 26 | One fan point controlled by one 6 amps one way modular switch and regulator. |
| 27 | One Exhaust fan point controlled by one 6 amps one way modular switch and regulator. |
| 28 | One bell point controlled by one 6 amps one way modular bell push switch. |
| 29 | Material and Labour for concealed Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with 2.5 Sqmm nominal cross sectional area PVC insulated unsheathed multi-stranded FRLSH copper conductor 1100 volts grade, drawn in and including medium grade, rigid PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), and including modular metal flush boxes concealed with modular natural / white finish front plate with base plate for the mounting of modular switches, sockets and fan regulators etc. etc including 2.5 Sqmm nominal cross sectional area PVC insulated unsheathed multi-stranded FRLSH copper conductor cable as earth continuity conductor to common earth dolly complete all as specified and directed for 6 Amp & 6/16 Amp Modular SocketNOTE:- The quoted unit rate is deemed to be inclusive of cost of metal flush boxes, modular white cover plates, modular frame plates, etc.However modular switches & sockets shall be measured and paid seperately under respective items of Schedule'A' BoQ. |
| 30 | Supply & Fixing LED tube light fitting. 20 W, 230v , efficacy 120 Lumens per watt, colour temprature 6500 K (Cool White), power factor greater than 0.90, polycarbonate body , CRI 80, IP rating IP 20,THDv within 5% and THDi (8-10%) complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size from ceiling rose all as specified and directed. Notes :- 1.The rate of three core twisted flexible copper conductor cable of suitable size for connection is included in this item and nothing shall be paid extra on this account. 2. Warranty for replacement of each LED Light fitting shall not be less than 05 years from the date of purchase. 3. Date of Purchase shall be marked on each fixture with permanent marker for redeeming warrenty benifits. |
| 31 | Supply & Fixing LED tube light fitting. 10 W, 230v , efficacy 120 Lumens per watt, colour temprature 6500 K (Cool White), power factor greater than 0.90, polycarbonate body , CRI 80, IP rating IP 20, THDv within 5% and THDi (8-10%) complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size from ceiling rose all as specified and directed. Notes :- 1.The rate of three core twisted flexible copper conductor cable of suitable size for connection is included in this item and nothing shall be paid extra on this account. 2. Warranty for replacement of each LED Light fitting shall not be less than 05 years from the date of purchase. 3. Date of Purchase shall be marked on each fixture with permanent marker for redeeming warrenty benifits. |
| 32 | Supply & Fixing 20 W Energy saving environmently friendly , long life, corrosion resistant, impact proof, surface mounting luminaire IP66 with PC housing & opal finish cover suitable for wet location, THDv within 5% and THDi (8-10%), LEDs used as light source including connecting up with three core twisted flexible copper conductor cable with suitable size from ceiling rose all as specified and directed. Notes :- 1.The rate of three core twisted flexible copper conductor cable of suitable size for connection is included in this item and nothing shall be paid extra on this account. 2. Warranty for replacement of each LED Light fitting shall not be less than 05 years from the date of purchase. 3. Date of Purchase shall be marked on each fixture with permanent marker for redeeming warrenty benifits. |
| 33 | Material and Labour for concealed Point wiring using approved colour coding as per IS ( Red, Black and Green for single phase circuits) with multi-stranded copper conductor 1.5 Sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked with valid CML No in and including medium grade, in stove enamelled steel conduit conduit and conduit accessories concealed in wall/roof/floor etc. ISI marked , including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly One light point/Fan point controlled by one 16 amps one way flame proof switch and including suitable MS sunken box of suitable size and covered with & including 3 mm thick plastic laminated sheet (ISI marked) top cover etc complete all as specified. (Cost of MS sunken box and bakelite sheet included in the rate). complete all as specified and directed at site. |
| 34 | Supply & fixing flame proof exhaust fan of size 305 mm sweep,motor 0.25 HP,1440 RPM, AC single phase 230V with blades , frame and louver, complete all as specified and directed. |
| 35 | Material and Labour for flame proof metalic hose conduit, M20/3/4\\" conduit MxM/FxF 300mm, complete all as specified and as directed. |
| 36 | Material and Labour for flame proof 4 way lighting junction box in cast aluminium alloy LM-6 material size 3/4 “ ET 125 mm x 75 mm dia, with 6 Nosterminals/connectors 4 sq terminals with flanged cover earthing external 2 Nos, and internal 1Nos2 Nos3/4” ET entry, hardware in stainless steel with anti corrosive epoxy powder coated with protection IP-65 equipment standard as per IS-2148/81, alongwith along with cable glands double compression flame proof heavy duty suitable for gas group I/IIA/IIB/IIC approved by CCE and certified by CMRI complete all as specified and directed by Engineers in charge. |
| 37 | Material and Labour for flame proof 3 way lighting junctionbox in cast aluminium alloy LM-6 material size 3/4 “ ET 125 mm x 75 mm dia, with terminals/connectors 6 Nos, 4 sq terminals with flanged cover earthlings external2 Nos, and internal-2 Nos 3/4” ET entry, hardware in stainless steel with anti corrosive epoxy powder coated with protection IP-65 equipment standard as per IS-2148/81, alongwith along with cable glands double compression flame proof heavy duty suitable for gas group I/IIA/IIB/IIC approved by CCE and certified by CMRI complete all as specified and directed. |
| 38 | Supply and Fixing Sheet metal enclosure for pre wired distribution board double door, vertical type powder coated triple pole & Neutral (VTPN) 12 way , three phase 415 volt with 200 Amps rated tinned electrolytic copper bus bar with neutral link complete concealed in wall all as specified and directed. |
| 39 | Supply & Fixing Timelite DB including one no. 32 Amps 3 pole MCB, One no. power contactor ML2 and one no. programable digital time switch suitable for street light control incl all internal copper wiring for connections & other accessories, all as speciefied and directed. NOTE- Make of DB, MCB ,power contactor and time switch should be same. |
| 40 | Supply and Fixing MCB encloser (cutout) sheet steel, 4 way, phosphatised, powder painted MCB DBs as per IS 13032. Note: MCB will be measured and paid separately. |
| 41 | Material and Labour for Sub main wiring concealed PVC conduit with two single core of size 4 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade drawn in and including non metallic rigid PVC conduit medium quality of size 25 mm dia conforming to 3537 Part-I ISI marked including one single core of size 4 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade as in contineous earth conductor cable connected to earth dolly complete all as directed. (Colour code phase-Red, Nuetral-black and Earth as Green) complete all as specified & directed.Notes:-(a) Cost of PVC conduit , conduit accessories and earth wire included in sub main wiring. (b) Three single core 4 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including non metallic rigid PVC conduit of size 25 mm dia shall be measured as one length. |
| 42 | Material and Labour for Sub main wiring concealed PVC conduit with four single core of size 4 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade drawn in and including non metallic rigid PVC conduit medium quality of size 25 mm dia conforming to 3537 Part-I ISI marked including one single core of size 4 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade as in contineous earth conductor cable connected to earth dolly complete all as directed. (Colour code phase-Red, Nuetral-black and Earth as Green) complete all as specified & directed.Notes:-(a) Cost of PVC conduit , conduit accessories and earth wire included in sub main wiring. (b) Five single core 4 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including non metallic rigid PVC conduit of size 25 mm dia shall be measured as one length. |
| 43 | Material and Labour for Sub main wiring concealed PVC conduit with two single core of size 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade drawn in and including non metallic rigid PVC conduit medium quality of size 25 mm dia conforming to 3537 Part-I ISI marked including one single core of size 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade as in contineous earth conductor cable connected to earth dolly complete all as directed. (Colour code phase-Red, Nuetral-black and Earth as Green) complete all as specified & directed.Notes:-(a) Cost of PVC conduit , conduit accessories and earth wire included in sub main wiring. (b) Three single core 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including non metallic rigid PVC conduit of size 25 mm dia shall be measured as one length. |
| 44 | Material and Labour for Sub main wiring concealed PVC conduit with four single core of size 2.5 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade drawn in and including non metallic rigid PVC conduit medium quality of size 25 mm dia conforming to 3537 Part-I ISI marked including one single core of size 2.5 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade as in contineous earth conductor cable connected to earth dolly complete all as directed. (Colour code phase-Red, Nuetral-black and Earth as Green) complete all as specified & directed.Notes:-(a) Cost of PVC conduit , conduit accessories and earth wire included in sub main wiring. (b) Five single core 2.5 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including non metallic rigid PVC conduit of size 25 mm dia shall be measured as one length. |
| 45 | Supply and Fixing LED Security light fitting 25 Watt, luman efficacy of LED 140 lm/W, PF> 0.95, THD < 10%, colour temprature 6500K, CRI > 70, system lumen not less then 2600 Lm, made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens with toughed glass having bottom separate driver compartment with IP 66 Protection and Impact resistant of IK 07 etc and all accessories previewed complete including mounting bracket of 40 mm inner dia light grade of required length and shape incl bending, forging or welding etc and suitable bolts and nuts with washers, including connecting with PVC insulated multi stranded copper flexible cable of size 0.5 sq m three core from ceiling rose to fitting all as specified an directed. Notes :- 1.The rate of PVC insulated multi stranded copper flexible cable of size 0.5 sq mm three core from ceiling rose to fitting for connection is included in this item and nothing shall be paid extra on this account. 2. Warranty for replacement of each LED Light fitting shall not be less than 05 years from the date of purchase. 3. Date of Purchase shall be marked on each fixture with permanent marker for redeeming warrenty benifits. |
| 46 | Supply and Fixing 02 x LED lamp 1w, pin type, 230V AC , 50 Hz single phase in diferent colour (01 x Red and 01 x Green colour) including bakelite button holder with all fitting accessories complete all as specified and as directed. Note: 1. Warranty for replacement of each LED shall not be less then 05 years from the date of purchase.2. Date of purchase shall be marked on each fixture with permanent marker for redeeming warranty benfit. |
| 47 | Supply and Fixing patients bed side remote switch unit with call and cancel option with minimum range of 150m wireless connected to indicator panel and sound system with hanging arrangement for the comfort of patients all as specified and directed. |
| 48 | Supply, Installation and comissioning of calling bell panel with indicator panel showing number in Digital numeric display in bright red color the bed number of patients with cancel/attanded options and a bed side units with push buttons call and cancel options. All switches will be connected to a centralized alarm ding dong type sound system for at least 15 persons working on 240 V, 50Hz supply complete all as specified and directed |
| 49 | Supply & Fixing Modular Telephone RJ 11 Socket , 1 module in a concealed flush box in wall including connected items complete all as specified and as directed. |
| 50 | Supply & Fixing Modular LAN RJ 45 Socket , 1 module in a concealed flush box including connected items complete all as specified and as directed. |
| 51 | Supply & Fix sheet metal enclosure for prewired distribution board double door, verticle type powder coated triple pole & Neutral (VTPN) 8 way, 3 phase 415 volt with 200 Amp rated tinned electrolytic copper busbar with neutral link complete concealed in wall all as specified and directed. |
| 52 | Material and Labour for Sub main wiring concealed PVC conduit with TWO single core of size 2.5 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade drawn in and including non-metallic rigid PVC conduit medium quality of size 25 mm dia conforming to 3537 Part-I ISI marked including one single core of size 2.5 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade as in continuous earth conductor cable connected to earth dolly complete all as directed. (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified&directed.Notes:-(a) Cost of PVC conduit , conduit accessories and earth wire included in sub main wiring. (b) Three single core 2.5 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including non metallic rigid PVC conduit of size 25 mm dia shall be measured as one length. |
| 53 | EXTERNAL WATER SUPPLY WORKS NOTE:- For items of EXTERNAL WATER SUPPLY WORKS notes given at the beginning of Sch ‘A’ Part-IV ( EXTERNAL WATER SUPPLY WORKS) shall also be applicable. |
| 54 | Material and Labour for Construction of brick massonry valve pit chamber of inner dimension 450mm x 450mm x 600mcm suitable for gate valves upto 40 mm size with PCC : 1:4:8 type D-2 for foundation brick work in cm 1:6 rendering 1:4, 15mm plastering , coping in PCC 1:2:4 type B-1 , including MS Sheet cover of thickness 3 mm on 50mm x 50mm x 6.0mm angle iron frame work including two coats of synthetic enamelled paint paint over one coat of red oxide primer with making provision of locking arrangement and necessary excavation in soft/loose soil, returing , filling in and removal of surplus soil to a distances 15 mtr not exc 50m , complete all as specified and directed. |
| 55 | Material only for shifting and laying in trenches of existing 80mm water pipeline to a distance of 60 m from existing location to specified location with all fitting and fixtures, complete all as specified and directed.Note: Extra pipe required for shifting will be measured and paid under relevant items |
| 56 | EXTERNAL ELETRIC SUPPLY AND DG SET WORKS NOTE:- For items of EXTERNAL ELECTRIC SUPPLY AND DG SET WORKS notes given at the beginning of Sch ‘A’ Part-V ( EXTERNAL ELETRIC SUPPLY AND DG SET WORKS ) shall also be applicable. |
| 57 | Supply, installation, commissioning and testing of outdoor type cubical panel board made out of 3.15 mm thick CRCA sheet for outer shell and made ot of 2 mm thick CRCA sheet for inner shell and MS angle frame 50X50X6 mm CPRI approved fabricated double door including CT and PT of suitable rating with internal connection in aluminium strip of suitable rating both side openable suitable for 3 phase 415 V powder coated 90 microns comprising of following (a) TPN 04 nos aluminium busbar in equal size 3 phase and neutral 500 amp rating duly insulated fitted on heat shrinkable insulation and covered with colour sleeve..(b) Incoming MCCB 315 Amp 36 KA 415 V FP - 01 Nos.(c) Outgoing MCCB 160 Amp 25 ka 415 V FP - 02 Nos (d) Outgoing MCB FP 63 Amp C Curve , 10 KA - 02 Nos.(e) Multifunction meter for measure,current of Amp, Voltage and Frequency.(f) LED Indicator lamp - 01 Set of Three. |
| 58 | Supply, installation, commissioning and testing of outdoor type cubical panel board made out of 3.15 mm thick CRCA sheet and made M&L for outdoor type cubical panel board made out of 3.15 mm thick CRCA sheet for outer shelland made ot of 2 mm thick CRCA sheet for inner shell and MS angle frame 50X50X6 mm CPRI approved fabricated double door including CT and PT of suitable rating with internal connection in aluminium strip of suitable rating both side openable suitable for 3 phase 415 V powder coated 90 microns comprising of following (a) TPN 04 nos aluminium busbar in equal size 3 phase and neutral 300 amp rating duly insulated fitted on heat shrinkable insulation and covered with colour sleeve.(b) Incoming MCCB 200 Amp 36 KA 415 V FP adjustable thermal & Fixed Magnetic 100 % - 01 Nos.(c) Outgoing MCCB 100 Amp 25 KA 415 V TP - 02 Nos(d) Outgoing MCB FP 40 Amp C Curve 10 KA- 01 Nos.(e) Multifunction meter for measure,current of Amp, Voltage and Frequency.(f) LED Indicator lamp - 01 Set of Three |
| 59 | Supply & fixing GI brackets made of 40 mm nominal bore GI pipe light grade, ISI Marked, of required length not less than 1.5 M long, mounting brackets made out of Mild steel FI 40mm x 6 mm of required shape ( two Nos) duly fitted with Mild steel nuts, bolts and washers and painting with two coats of synthetic enamelled paint over one coat of red oxide Zinchrome primer and fixed to pole / walls etc complete all as specified. |
| 60 | Supply and Fixing thermoplastic cable junction box IP- 55 (minimum) with metric knockout for cable entry of size 200 x160 x98 mm fixing on pole with 30 x 5 mm MS clamp , nut bolt washer , terminal block and glands suitable for 16 Sqmm core cable including 6-32 Amp MCB SP and including S&F 1.5 Sqmm x 3 core 9 RM length of copper conductor cable and making connections complete all as specified and directed. |
| 61 | Supply, fixing and connecting street light timer switch digital type having 24 hours to 7 days time setting astro type ( having longitude and latitude in memory) with 6 years battery back up complete with following accessories provisioned in factory made sheet metal box powder coated and fixing arrangement on pole/wall/ or in feeder pillar and dismantling unserviceable switch complete all as specified. :- (a) MCB TP 32 Amps, 415 volts. -1 No.(b) Digital timer having 24 hours to 7 days time setting with memory location -1 No.(c) Power contactor ML-3 three pole coil voltage 240 v - 1 No.(d) Complete wiring with suitable size of copper wire including necessary thimbles. |
| 62 | Supply, install, testing and commissioning of Eco friendly Generating Set , Diesel Engine driven of capacity 100 KVA/80 KW at 0.8 PF, 415 volts AC, 3 phase, 50 Hz 4 wire, directly coupled alternator and engine, Engine and alternator assembled at Original Equipment Manufacturer factory, water cooled common base platform with inbuilt fuel tank and including all excavation, PCC foundation, anti vibration pads/dampers as per manufacturer instructions and as directed by manufactured. The DG set shall work at ambient conditions of Kamptee and produce specified out put.The derating factors, if any, shall be taken in to consideration while arriving the capacity to give specified out put. The DG set shall be factory assembled by the OEM of the engine manufacturer and all components shall be accommodated in enclosure and other accessories comprising of the following all asper ISO 8528:- |
| 63 | Contd... from serial item No.7.06 (A) Engine : Eco friendly for emission and noise (CPCB IV NORMS COM(A) Engine : Eco friendly for emission and noise (current CPCB NORMS COMPLIANCE) diesel engine confirming to BS/IS standard,confirming to BS:5514 as per the standard design of OEM to run the DG set in full load / 110% overload with out any change of out put parameters, (not less than 126 BHP),1500 RPM, water cooled complete under NTP condition, with a provision for 10% over load for one hour on 12 hours continious running with the following:- |
| 64 | Contd... from serial item No.7.07 (A) (i) Radiator/Heat exhanger cooling system (ii) Corrosion inhibitor coolent(iii) Engine mounted water pump(iv) Thermostats(v) Fly wheel with housing complete.(vi) Fuel pump system with heavy duty injectors and self contained piping.(vii) Spin on type fuel filters(viii) Lub oil pump with self contained piping.(ix) Heavy duty Turbo Charger(x) Air intake manifold with necessary connections.(xi) Dry type replaceable paper element air filter.(xii) Exhaust manifold with flexible piping system and exhaust chimney extended up to a height as per statutory requirement of local pollution control board.(xiii) Hospital grade silencer.(xiv) Electronic Control panel with Digital governor(xv) Self starter, 24 V, DC(xvi) Display for fault(xvii) Lead acid DC battery 12 volts,180AH - 02 Nos(xviii) Battery charging alternator with inbuilt regulator.(xix) Electronic instrument Panel |
| 65 | Contd... from serial item No.7.08 (B) Alternator : Synchronous alternator 100 KVA, 1500 RPM, 415 Volts, 50 Hz, 3 phase system self excited, self regulated, self ventilated in brushless design provided with suitable automatic voltage regulator with ± 1% all load between no load to full load and power factor 0.8 to unity with 10% overload capacity for one hour in any 12 hours of operation without exceeding temp rise limit, Confirming to IS 4722 with standared design with IP 23 protection and class of \\"H\\" insulation & having surge seperator for protection of alternator for reverse supply .The alternator shall be capable of carrying an unbalanced load of 25% with out injurious heating of any part, provided rated current is not exceeded.The alternator shall withstand a short circuit at its terminals for three seconds with excitation adjusted to develop rated voltage at noload without any damage. . (C) Base Frame : Base rail made out of suitable MS channel mounted on AVM pads as recommended by the manufacturer with integral fuel tank of suitable capacity with drain plug, air vent, inlet and outlet connection, level indicator and with provision of cleaning.(D) Acoustic enclosure : Acoustic enclosure drip proof & screen protected meeting stringent MOEF/CPCB norms of 75 dBA @ 1 mtr at 75% load under free field conditions with air inlet louvers powder coated. Use of stainless steel hardware and insulating materials shall meet exacting ISO : 8528 part 10 by MOEF and CPCB -II norms insulating materials. Acoustic enclosure shall be as per manufacturer\\"s design.(E) Provision of DG set foundation : As recommended by the manufacturer in PCC 1:2:4 up to 30cm above ground level. |
| 66 | Contd.. from serial item No.7.09 (F) Generator controller: Microprocessor based generator controller with 4 line LCD display with settable prameters for display, audio visual warning and shut down for the following parameters:-i) Display parameters Battery voltage,Coolent Temperature,Lubricating Oil Pressure, Engine Speed, Engine Hours,Fuel level indication in %,Generator voltage, current, PF, KWH & KWii) Audio visual warning for followingLow oil pressure, High coolant temperature, low battery voltage, low fuel leveliii) shut down/trip with audio/ visual anunciation for the following parametersHigh water Temperature (HWT), Low lube oil pressure (LLOP),Over/under speed,high canopy temperature, under/ over voltage, under/over frequency, low fuel level.(G) AMF CONTROL PANEL : Factory made cubical type Inbuilt AMF panel board, indoor type made out of MS angle not less than 25X25X5 mm and 2 mm thick MS CRCA sheet, front opening type, protection class IP-54, duly powder coated after seven tank process, with electric grade copper bus bar of 200 Amps capacity for four poles, with all standard switchgear and protection, internal wiring of adequate size PVC insulated multistranded copper conductor cable etc and also consisting of following :-(a) MCCB 160 Amp,25 KA 415 Volts, rating 4 pole, rupturing capacity, specially fixed for incoming supply with over load relay, short circuit and earth fault protection – 02 Nos with suitable rating HRC back up fuses.(b) AMF logic panel including wiring, power contactor with MCCB suitable capacity for DG Set of main supply, single phase preventor, digital multifunction meter (showing Amps, Volts, Hz, KWH etc), Emergency stop Button, DG Set over load, High water temp, Low lub oil pressure, Auto charging unit and failure to start, Phase indication lamp LED type RYB includig all relays, circuit and protection required for automatic operation of DG Set. |
| 67 | M&L for outdoor type cubical panel board made out of 3.15 mm thick CRCA outer sheet and made ot of 2 mm thick CRCA sheet inner sheet and MS angle frame 50X50X6 mm CPRI approved fabricated double door both side openable suitable for 3 phase 415 V powder coated 90 microns comprising of following:(a) TPN busbar copper 3 phase and neutral 200 amp rating duly insulated fitted on heat shrinkable insulation and covered with colour sleeve.(b) Incoming MCCB 160Amp 36 KA 415 V FP - 01 Nos. (c) outgoing MCCB 63 Amp 10 KA 415V FP - 02 No.(d) Outgoing MCB FP 40 kA -02 Nos(e) Multifunction meter for measurement of Amp, Voltage and Frequency.(f) LED Indicator lamp - 01 Set of Three. |
| 68 | ROAD, HARDSTANDING / PATH AND CULVERT WORKS NOTE:- For items of ROAD , HARDSTANDING / PATH AND CULVERT WORKS notes given at the beginning of Sch ‘A’ Part-VI ( ROAD, HARDSTANDING / PATH AND CULVERT WORKS ) shall also be applicable. |
| 69 | Material and Labour for 2.5mm thick painting to road surfaces as in lines, dashes,arrows,letters, zebra crossing etc. on roads, pavements and the like etc. with thermoplastic road marking paint including applying Type-II Glass Beads dispensed from the in built while the painting surfaces are hot by mechanical means including cleaning surfaces complete all as specified and directed Note: Application shall be carried out through mencanical appliances by the approved applicator of the manfacturer paint. |
| 70 | Supply and Fixing Solar Road Stud of size 125mm x 125mm x 20mm , Aluminium alloy & Polycarbonate Stud ( Red / Yellow LEDs) 3+3 LED's with shank in tough aluminium , diecast body with MS zinc coated nails of size 12mm dia and 120mm long , complete as per MORTH / IRC specifications & all as directed. |
| 71 | LIGHTINING PROTECTION AND CHEMICAL EARTHING WORKS NOTE:- For items of LIGHTINING PROTECTION AND CHEMICAL EARTHING WORKS notes given at the beginning of Sch ‘A’ Part-VII ( LIGHTINING PROTECTION AND CHEMICAL EARTHING WORKS ) shall also be applicable. |
| 72 | Supply and fixing epoxy insulator with brass nut , bolt and washer with necessary drilling for bolt hole for holding / fixing roof conductor / down conductor of lightning conductor complete all as specified and as directed Please Enable Macros to View BoQ information |
| 73 | Supply and fixing epoxy insulator with brass nut , bolt and washer with necessary drilling for bolt hole for holding / fixing roof conductor / down conductor of lightning conductor complete all as specified and as directed Please Enable Macros to View BoQ information |
