Tender For Comprehensive Maintenance Works At Upper Drugmulla And Repair, Maintenance Of Internal Wiring At Zangli, Drugmulla And Chakkigam Under The Aor Of Ge 874 Ews., Kupwara-Jammu And Kashmir

TDR : 55579871

Tender Notice
BOQ

19 Days Left

Kupwara , Jammu And Kashmir

Tender Brief : Tender For Comprehensive Maintenance Works At Upper Drugmulla And Repair, Maintenance Of Internal Wiring At Zangli, Drugmulla And Chakkigam Under The Aor Of Ge 874 Ews.

Document Fees
₹ 500 /-

EMD
₹ 74000.0 /-

Tender Value
Refer document

Submission Date
09-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Taking down chowkhat with shutter without taking off shutter from the frame exc 1.5 Sqm and not exc 4 Sqm each complete all as specified and directed.
2	Taking down chowkhat with shutter without taking off shutter from the frame n exc 1.5 Sqm each complete all as specified and directed.
3	Taking down of shutter exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.
4	S&F 3mm thick sheet glass ordinary quality fixed with oil putty to metal frame including hacking out old broken glass (in any description) from metal frame complete all as specified and directed.
5	S&F factory made 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
6	S&F factory made 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, both face covered with decorative face veneer with lipping/frame to match commercial type on both sides complete all as specified and directed.
7	M&L for factory made 35mm Glazed and skeleton shutters, Second Class Soft wood for open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
8	M&L for factory made 30mm Glazed and skeleton shutters, Second Class Soft wood for window open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
9	M&L Second Class Soft Wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
10	M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed.
11	S&F mild steel frame work such as grills, grating etc, with ends of bars shouldered &/or riveted or forged into spikes, framed guard bars, barred iron door ladder, frame balusters, walk ways, railing, frame work or water tanks & similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
12	S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
13	S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
14	S&F extruded aluminium alloy with galvanised mild steel hinge pin Butt hinges 100mm long type B-1 complete all as specified and directed.
15	S&F extruded aluminium alloy with galvanised mild steel hinge pin Butt hinges 75mm long type C-21 complete all as specified and directed.
16	S&F Aluminium anodised, barrel tower bolts of extruded section and fixed 150 mm long complete all as specified and directed.
17	S&F Aluminium anodised, barrel tower bolts of extruded section and fixed 100mm long complete all as specified and directed.
18	S&F extruded aluminium alloy handles 125mm size fabricated type anodized ISI marked complete all as specified and directed.
19	S&F MS barrel tower bolt 200mm long stove enamelled black with bright bolt & fixed complete all as specified and directed.
20	S&F MS pressed bow handle of 150m size oval type stove enamelled black complete all as specified and directed.
21	S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
22	S&F mild steel butt hinges medium weight cold rolled of size 100mm, ISI marked complete all as specified and directed.
23	S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300mm long not less than 12mm dia with and including minimum of 06 bolts and nuts, 4 on plate and 2 on staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, plate and fixed complete all as specified and directed.
24	S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples to wooden/steel frames with beading complete all as specified & directed.
25	S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane complete all as specified and directed.
26	S&F Powder coated anodised aluminium frame for doors, and Partition panel with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
27	S&F powder coated anodised aluminium door shutters aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified
28	S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats glazing clips rubber packing, anodised aluminium snap beading screw, anodised aluminium fittings such as peg stays 150 mm long (01 Nos) hinges type B-21 100 mm long (2 Nos) suitable handles (1 no) complete all as specified and directed.
29	S&F 4mm mm thick sheet glass ordinary quality and glazing with oil putty in/or fix in aluminium windows square n exc 0.50 Sqm in each pane complete all as specified and as directed.
30	S&F anodised aluminium grill of approved pattern for windows / ventilators / doors / complete all as specified and directed.
31	S&F powder coated aluminium door anodised of approved colour( size of frame : 63.5mx38.10mmx2mm thick & size of shutter : door vertical (style ) with gasket of size 46.3mmx45.00mmx 1.50mm thick, top rail of size 47.00mmx45.00mmx1.30mm lock rail/middle rail 83.00mmx44.50mmx1.65mm thick bottom rail 114.3mmx45.00mmx1.50mm thick including S&F of 4.8 mm thick sheet glass with glazing clip, PVC track gasket ,EPDM rubber gasket on glass of weather tightening along with recessed type handle, hinges, mortice lock, door closer complete all as specified and directed.
32	S&F powder coated aluminium window having three track section 92mmx31.75m shutter section 40mmx18mm mounted on bearing to slide on track plain anodised of approved colour including S&F of 5 mm thick frosted/plain glass and wire mesh with glazing clip, PVC track gasket ,EPDM rubber gasket on glass of weather tightening along with recessed type handle and lock including sealing gap with marble /granite surface with silicon sealant making it water proof in all manner complete all as specified and directed. .
33	S&F in repair door closer hydraulically regulated Aluminium (extruded section body) designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.
34	M&L labour for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
35	M&L 2nd class soft wood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints chamfered both sides fixed to frame work with secret nailed as in wall panelling 15mm including cornice and beading as required and applying two coat of melamine polish including sanding/filler repair /sealer coat complete all as specified and directed. Note-: frame work shall be measured and paid separately.
36	M&L second class softwood as in scantling clean sawn fixed in position with nails, unframed work Including dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.
37	M&L for Glazed coloured ceramic tiles in vertical surface 300x450x7/ 600x300x7 mm thick over and including 10 mm rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed.
38	M&L for Vitrified tiles (dark shade / double charged /ultra charged) 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm as on vertical surfaces over 10 mm rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile Complete all as specified and directed.
39	M&L for Vitrified tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floors etc. laid over and including 15 mm screed bed or bedding layer in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed.
40	M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. laid over and including 15 mm screed bed or bedding layer in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed.
41	M&L for non skid ceramic tiles (White Tiles) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. laid over and including 15 mm screed bed or bedding layer in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile Complete all as specified and directed.
42	M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting or vertical surface etc. laid over and including 10 mm screed bed or bedding layer in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.
43	M&L for machine cut Kota stone slab flooring 18 to 20mm thick as in floor, cooking platform, treads etc. laid over 20 mm screed bed or bedding layer in CM 1:6 set and jointed in neat cement slurry and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing by machine, complete all as specified and directed by Engr-in-charge
44	M&L for machine cut Kota stone 15-16 mm thick as in riser of steps, skirting, dado and pillar set over 10 mm rendering in CM 1:3 and jointed with grey cement slurry mixed with pigments to match the shade including rubbing and polishing complete all as specified and directed.
45	M&L for 16-18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15 mm screed bed or bedding layer in CM 1:4 complete all as specified and directed.
46	M&L for machine cut 20 to 25 mm thick Kota stone in single piece as in shelves and similar works laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing including ball nosing of exposed edges and including dismantling old stone slabs complete all as specified and directed.
47	Demolition Stone slabs and tiles of any laid bedded and pointed in any mortar description or thickness in floors, walls aprons etc complete all as specified and directed.
48	Demolition cement concrete (unreinforced) in ground floor and paving n exc 15 cm thickness (below or above ground level) & removal of all rubbish materials complete all as specified and directed.
49	M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in Cement mortal 1:6 including demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars & precast concrete masonry etc complete all as specified & directed.
50	M&L for 50mm thick PCC 1:2:4 type B-1(using 20 mm graded stone aggregate) as in flooring/foot path finished even and smooth without using extra cement complete all as specified and directed.
51	M&L for 25 mm thick PCC 1:2:4 type B-1 (using 12.5mm graded aggregate) as in levelling coarse of floors complete all as specified and directed.
52	M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base of roof/floor/pavings/path etc complete all as specified and directed.
53	M&L rendering 15 mm thick in CM 1:4 on stone masonry surfaces or on other than fair faces of brick masonry finished even and smooth without using extra cement including taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
54	M&L rendering 15 mm thick in CM 1:6 on stone masonry surfaces or on other than fair faces of brick masonry finished even and smooth without using extra cement including taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
55	M&L rendering 10mm thick in CM 1:3 on concrete ceiling surfaces finished even and smooth without using extra cement including taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
56	M&L for preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and directed.
57	M&L for preparation of new plastered surfaces & providing two coats of distemper oil emulsion complete all as specified and directed.
58	M&L for preparing newly plastered surfaces & applying three coats of white wash on ceiling complete all as specified and directed.
59	Supply only water proofing compound as per IS-2645 complete all as specified and directed.
60	S&F in repair vitreous China squatting pan of Orrisa pattern size 580mmx440mm white with integral foot rest (excluding flushing cistern and flush pipe including provision of cement concrete bedding complete all as specified and directed.
61	Supply and fixing in repair for PVC flushing cistern low level 10 ltr cap with inlet ball valve float and handle syphonic action type including brackets and flush pipe of polythene of low or high density ISI marked complete all as specified and directed.
62	S&F in repair 15mm dia bib tap cast coper alloy chromium plated fancy type crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
63	S&F in repair 15mm dia angle valve of copper alloy fancy type chromium plated screwed down high pressure with crutch or butter fly handle screwed on both ends for iron pipe or for union complete all as specified and directed.
64	S&F in repair swivel shower rose (fancy type) chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.
65	S&F in repair 15mm dia concealed stop valve/angle valve of copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butter fly handle screwed on both ends for iron pipe or for union complete all as specified and directed.
66	S&F in repair 600mmx450mm and 5mm thick looking mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood including framing and fixed to wooden plugs with chromium plated screws & cup washers complete all as specified and directed.
67	S & F in repair vitreous China wash basin with pedestal , white, flat back, size 550 x 400 mm including one no 15mm bore fancy type mixer taps with hot & cold, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipe, one No PVC waste pipe 25 mm dia and 75 cm long with 32 mm dia connector, 32mm size waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange end, bedded in red lead cement and other fixed and PVC connection 15 mm dia & 600mm long with two Nos check nut and washer complete including cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.
68	S&F WHB flat ack of size 580x450mm excluding Waste pipe, waste chain plug stopper but including pillar tap brackets including waste pipe cutting pinning in ends of brackets complete all as specified and directed.
69	S&F in repair 32 mm dia PVC flexible waste pipe for WHB/Sink 750 mm long with PVC complete all as specified and directed.
70	S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long fixed on wall with PVC rawl & cadmium plated brass screws complete all as specified and directed.
71	Taking up or down steel tubing and connections including cleaning for 20mm bore pipe and refixing old steel tubing and connection in new or old position (walls, ceiling, floor etc) bore of pipe in 20mm dia. complete all as specified and directed.
72	S&F tubes medium grade 'galvanised' with and including all fitting and fixed bore of 20 mm dia complete to walls and ceiling or laid in floors of 20 mm bore including taking up or down steel tubing and connections including cleaning for refixing complete all as specified and directed.
73	Taking up or down steel tubing and connections including cleaning for refixing 15mm bore pipe and refixing old steel tubing and connection in new or old position (walls, ceiling, floor etc) complete all as specified and directed.
74	S&F tubes medium grade 'galvanised' with and including all fitting and fixed bore of 15mm dia complete to walls and ceiling or laid in floors of 15mm bore including taking up or down steel tubing and connections including cleaning for refixing complete all as specified and directed.
75	S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and directed.
76	S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and directed.
77	S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
78	S&F 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with two nos tank nipples inlet and outlet including Dismantling of water tanks of capacity exc 250 but n exc 500 ltrs & removing form site complete all as specified & directed.
79	S&F in repair 1000 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with two nos tank nipples at inlet and outlet positions including dismantling of water tanks of capacity exc 500 but n exc 1000 ltrs and removing from site complete all as specified & directed.
80	S& F in repair ball valve brass high pressure with polythene float and fly nut screwed on iron pipe ad fixed 20 mm bore of pipe complete all as specified and directed.
81	S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
82	S&F in repair Brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
83	S&F in repair Grating doom 125 mm dia with waste hole of Stainless steel (Min wt 20 gms) complete all as specified and directed.
84	S&F Mirror cabinet (PTMT) fixed on wall with cadmium plated brass screws complete all as specified and directed.
85	S&F in repair chromium plated brass toilet paper holder, complete all as specified and directed.
86	S&F in repair brass chromium plated soap dish, complete all as specified and directed.
87	M&L for in repair CP brass jet assembly for EWC with PVC connection as required complete all as specified and directed.
88	S&F in repair brass chromium plated towel ring including a pair of CP brass bracket complete all as specified and directed.
89	S&F in repair vitreous China wash down water closet pan (EWC) white (ISI marked) including connection to drain (or outgoing pipe) and to flushing pipe anti syphonage pipe etc. with plastic WC seat cover (white) closed pattern complete all as specified and directed.
90	S&F in repair 15 mm Brass CP mixer for Sink (swan neck pattern) for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
91	S&F in repair toughened corner acrylic shelf 6mm thick with brass chromium plated guard and fixing arrangements complete of size 300 mm complete all as specified and directed.
92	S&F in repairs health faucet chromium plated suitable for 15 mm bore pipe including 1 M long PVC tubes for EWC complete all as specified and directed.
93	S&F in repairs 15mm bore Two way Angle valve chromium plated screwed plated screwed down, high pressure with capstan heads screwed both ends for iron pipe or for union complete all as specified and directed.
94	S&F in repairs 15 mm bore fancy type long body bib tap, half turn, with wall flange, cast copper alloy with capstan heads, chromium plated, screwed for iron pipe or for brass ferrule, complete all as specified & as directed.
95	S&F in repair brass CP wall mixer 3 in 1 with L-Bend mixing hot & cold water screwed down for iron pipe complete all as specified and directed.
96	S&F in repair 15mm dia bore cast copper alloy chromium plated fancy type pillar tap(Swan Neck) for without cold & hot water complete all specified and as directed .
97	S&F 110mm dia PVC (SWR) pipes type- B single sockets, in any length with rubber ring joints, fixed to walls as per site requirement including dismantling old unserviceable AC Pipe/ PVC pipes 110mm/ 75 mm dia complete all as specified and directed.
98	S&F 110mm dia PVC (SWR) pipes type- B single sockets, in any length with rubber ring joints, laid I trenches or in floor including dismantling AC Pipe/ PVC pipes 110mm/ 75 mm dia complete all as specified and directed.
99	S&F PVC (SWR) door bends 110 mm bore type- B complete all as specified and directed.
100	S&F PVC (SWR) door bends 75mm mm bore type- B complete all as specified and directed.
101	S&F PVC (SWR) Single door \\"T\\" 110mm mm bore equal or unequal type- B complete all as specified and directed.
102	S&F PVC (SWR) single door \\"T\\" 75 mm mm bore equal or unequal type- B complete all as specified and directed.
103	S&F PVC (SWR) vent cowl 75mm dia complete all as directed. type- B complete all as specified and directed.
104	S&F 75mm dia PVC (SWR) pipes type- B single sockets, in any length with rubber ring joints, laid in trenches or floors including dismantling AC Pipe/ PVC pipes 110mm/ 75 mm dia complete all as specified and directed.
105	All as per item No 104 here in before but fixed to walls with clamps including dismantling AC Pipe/ PVC pipes 110mm/ 75 mm dia complete all as specified and directed.
106	S&F PVC (SWR) bends type- B 75mm dia any radius complete all as specified and directed.
107	S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm pipe complete all as specified and directed.
108	S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm pipe complete all as specified and directed.
109	S&F PVC (SWR) floor trap,75mm plain with grating including jointing with solvent cement complete all as specified and directed.
110	S&F PVC (SWR) floor trap,100mm plain with grating including jointing with solvent cement complete all as specified and directed.
111	S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.
112	Treatment for sunken portion is as follows :-
113	(a) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion including vertical wall surface complete as directed.
114	(b) Maintain the Sunken to a slope of 1:40 outward with 32mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall.
115	(c) Top of the sunken floor slabs shall be laid to a slope 1:40. The surface of RCC slab shall be made even and smooth by using extra cement while the concrete is still green. Concave fillet in PCC (1:2:4) type B0 of radius 75 mm shall be provided at the junctions of RCC slab and adjoining walls.
116	(d) M&L for floor and side walls upto the finished floor level shall be plastered with 15 mm thick CM (1:4) mixed with water proofing compound @ 3% by weight of cement. Over plastered surfaces, M&L for applying evenly two coats of industrial bitumen 85/25 at the rate of 1.20 Kg/Sqm in each coat over vertical surfaces and floors of sunken floors of toilet including cleaning of surfaces a layer of APP based polymeric membrane not less than 3mm thick, weighing not less than 3 kg per sqm, reinforced with polyesters non- woven fabric (weighing not less than 150 gm per square metre) shall be laid by torch application. Side overlaps shall be 100mm and the ends laps shall be 150 mm and overlap joints shall also be sealed by torch application.
117	(e) The sunken portion shall be filled with lean cement concrete (1:5:10), type E2 using 40 mm brick aggregate after carrying out satisfactory testing of CI pipes / joints and slabs / walls by filling water for 72 hours. The sunken portion of Nahani / floor trap and pipe joints shall be embedded in PCC (1:3:6) blocks.
118	(f)32 mm dia GI spout shall be provided to drain out leakage, if any.
119	Dismantling wrought iron or mild steel work of any description not otherwise provided for
120	M&L for mild steel work as in roof trusses (framed), Fe 410 -W (Gde E- 250) quality-A /square of hollow section trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including one shop coat of primer complete all as specified and directed
121	S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified. Including Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
122	S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified. Including Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
123	M&L for providing & fixing false ceiling at all heights with GRG (Glass Fibre With Semi With fully Reinforced Gypsum) false ceiling tiles of perforated 12mm Size 595 x 595 mm of approved texture, design and patterns having moisture micro tegular edged or 1 0 mm content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides)
124	comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1.00mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing including dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.
125	Disconnecting existing tanks, Capacity 500 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc and writing the date of cleaning etc complete all as specified and as directed.
126	Disconnecting existing tanks, capacity 1000 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc and writing the date of cleaning etc complete all as specified and as directed.
127	S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples to wooden/steel frames with beading complete all as specified & directed.
128	S&F one peace vitrified China wash down water closet pan pedestal pattern integrated flush tank white or coloured include p or s trap etc complete all as specified and directed.
129	Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.
130	Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
131	M & L Plain fillets 2nd class soft wood of exc. 3 & n exc. 6 Sqcm, square rectangular or triangular in section, clean swan, secured nails complete all as specified and directed.
132	M & L for point wiring with PVC insulated unsheathed single core multistranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLSH, drawn through PVC casing caping/PVC conduit 20mm dia including accessories and provision of PVC boxes for mounting switches, switch socket, fan regulator, provision of modular Teressa plate Irene stripes, No of modules as required on site or as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) earth wire and connected to earth dolly including taking down old one for one light /one fan/one bell point controlled by one switch.
133	All as per item No 125 herein before but for one socket outlet 5 pins 5 amps controlled by one switch on same board .
134	All as per item No 125 herein before but for one socket outlet 5 pins 5 amps controlled by one switch on independent board.
135	All as per item No 125 herein before but for wiring with 2.5 sqmm copper wire (FRLSH) and 2.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board.
136	S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed.
137	S&F socket outlet multi 5 pins 5 amp complete all as specified and directed.
138	S & F switch socket combination 2 in 1, 5A flush type complete all as specified and directed.
139	S&F switch piano flush button single pole, one way 15amps complete all as specified and directed.
140	S&F socket outlet 2 in 1, 6 pins 15 amp, complete all as specified and directed.
141	S & F switch socket combination 3 pin 16A, flush type complete all as specified and directed.
142	S&F ceiling rose, PVC/poly carbonate, isolated body three terminal complete all as specified and directed.
143	S&F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed.
144	S&F LED Lamp 9 Watt complete all as specified and directed.
145	S & F in replacement LED light fitting 1x9W/1X10Wbulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
146	Supply and fixing in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
147	Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. complete all as specified and directed.
148	Supply and fixing in replacement LED luminaire 600 mm x 600 mm 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
149	Supply and fixing of VILLA 1 W 5700 K Solar Gate/Pillar Light IP65 protection with built-in Solar panel, LED Light and Lithium battery with charge controller with driver and lamp complete all as specified and directed.
150	Supply and fixing 7 Watt outdoor type BRILLANTE ROUND WALL WASHER Crafted from Aluminium Die Cast with Four-Directional Beam. Its integrated LED ensures long-lasting and energy-efficient with IP65 Protected complete all as specified and directed.
151	Supply and fixing in replacement round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. all as specified and directed.
152	S&F Bed side designer light 7 watts with LED inverter type, including all wiring and switches required, with terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body. complete all as specified and directed.
153	supply and fix in replacement Decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit LED 20W B22 base with 1x20 watt LED lamp complete all as specified and directed.
154	Supply and fix in replacement focus light 12/15 W LED (as per sample) with IP 65 protection complete all as specified and directed.
155	Supply only Rechargeable LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
156	S&F rechargeable LED Lamp 9 Watt complete all as specified and directed.
157	Supply and fixing in replacement exhaust fan AC single phase, 1200 rpm 230/240V of size 250mm sweep with louvre heavy duty . complete all as specified and directed.
158	S&F Air Circulator wall mounted fans 230 volts single phase oscillating 450 mm sweep suitable complete all as specified and directed.
159	Supply only, water heater storage type, electric capacity 50 ltr along with all accessories BEE 5 star rated complete all as specified and directed.
160	S&F sheet metal enclosure for DBs (single door type) when MCBs to be used single pole and neutral 4 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed.
161	S&F sheet metal enclosure for DBs (single door type) when MCBs to be used single pole and neutral 8 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed.
162	S&F sheet metal enclosure for DBs (single door type) when MCBs to be used single pole and neutral 12 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed.
163	S&F single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 amp complete all as specified and directed.
164	S&F in repair RCBOs double pole for earth leakage protection, overload & short-circuit protection 40 Amps, 100mA complete all as specified and directed.
165	S&F MCB single pole & neutral 40 to 63 Amps 230 Volts 'C' series, 10 KA complete all as specified and directed.
166	S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series, complete all as specified and directed.
167	S&F water heater storage type, electric capacity 25 ltr along with all accessories BEE 5 star rated complete all as specified and directed.
168	S&F in replacement, water heater storage type, electric capacity 15 ltr along with all accessories BEE 5 star rated, complete all as specified and directed.
169	M & L for sub main wiring with two single core 6 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FRLSH ISI marked drawn into & including medium grade PVC conduit/ casing caping 25 mm dia with all fittings and accessories and one continuous run of 4 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed concealed/ surface including taking down old unserviceable submain wiring and making good disturbed surface complete all as specified and directed.
170	M & L for sub main wiring with two single core 4 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor (FRLSH) ISI marked drawn into & including medium grade PVC conduit/ casing caping 25 mm dia with all fittings and accessories and one continuous run of 2.5 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed concealed/surface including taking down old unserviceable submain wiring and making good disturbed surface complete all as specified and directed.
171	M&L rewinding of ceiling fan with super copper enamelled wire with suitable gauge, varnishing, oiling and greasing of any make of size 1200 /1400 mm sweep by dismantling its parts, capacitor by replacing petty items such as split pins, clamps, nuts & bolts, bearing & washer both end of down rod, cleaning of fan body and its blade by cleaning agent, assembling and complete all as specified and directed.
172	M&L rewinding of exhaust fan with super copper enamelled wire with suitable gauge, varnishing, oiling and greasing of any make of size 450 mm sweep by dismantling its parts, capacitor 4 Mfd by replacing petty items such as nuts & bolts, bearing & washers, cleaning of exhaust fan body and its blade by cleaning agent, assembling, and connecting and testing complete all as specified and directed.
173	Supply and fixing ball bearing suitable for Ceiling and exhaust fan of any sweep and make complete all as specified and directed.
174	Supply and fixing gun metal bush suitable for any sweep fan of any make complete all as specified and directed.
175	Supply and fixing of Capacitor 2.5/3/4 mfd complete all as specified and directed.
176	Supply and fix in replacement heating element capacity of 1500 Watts (triangle type) for 25 Ltr geysers complete all as specified and directed.
177	Supply and fix in replacement heating element capacity of capacity of 2000 Watts for 25 Ltr geyser (triangle type) complete all as specified and directed.
178	Supply and fix in replacement heating element of capacity 3000 Watts for 225 Ltr geyser complete all as specified and directed.
179	Supply and fix in replacement thermostat 7''/9\\" suitable for 25/50 ltrs capacity water geyser with automatic thermal cut out fixed in repair and including testing, complete all as specified and directed.
180	Supply and fixing in repair of copper Geyser Assembly with rubber packing for 25/50 ltrs capacity water geyser with automatic thermal cut out including testing, complete all as specified and directed.
181	S & F and testing of compressor (Non-Inverter/Inverter) for split type air conditioner of capacity 1.5/2 ton and taking down of UNSERVICEABLE compressor, all as specified and directed by Engr-in-charge. Make of AC - Voltas, LG, Samsung or any other make
182	S & F and testing of thermistor (temperature Sensor) for split type air conditioner of capacity 1.5/2 ton and taking down UNSERVICEABLE Blower, all as specified and directed by Engr-in-charge. Make of AC - Voltas, LG, Samsung or any other make.
183	S & F and testing of PCB (Indoor/outdoor) for split type air conditioner of capacity 1.5/ 2 ton and taking down unserviceable PCB, complete all as specified and directed.
184	S & F and testing of Blower motor (Indoor fan motor /Outdoor fan Motor) for split type air conditioner of capacity 1.5/2 ton and taking down unserviceable blower motor complete all as specified and directed.
185	S & F and testing of Voltage Stabilizer 5 KVA for split type air conditioner of capacity 1.5/2 ton and taking down unserviceable Voltage stabilizer deposited to MES Store, complete all as specified and directed.
186	S & F and testing of out door unit motor for split type air conditioner of capacity 2/ 1.5 ton and taking down unserviceable motor complete all as specified and directed.
187	S & F and testing of outer unit fan of split type air conditioner of capacity 1.5/2 ton and taking down of unserviceable fan, complete all as specified and directed.
188	S & F and testing of 2 Way Valve assembly of split type air conditioner of capacity 1.5/2 ton and taking down of unserviceable fan, complete all as specified and directed.
189	Supply and fixing of Capacitor 50 MFD for 1.5 / 2 ton AC complete all as specified and directed.
190	Supply and refilling of gas R-22/ R-410/R32/ R134a for split/ window/ central package type Air conditioners and Refrigerators including checking and fixing leakage complete all as specified and directed.
191	S & F LED High bay luminaire of 70 W at any height in hangers / work shop closed version with Energy saving, environment friendly and aluminium alloy pressure die cast housing with epoxy powder coated LED IP 65 Luminaire with high power LED as light source complete and with in built surge voltage protection of 10 KV and with cover tempered protective toughened glass including taking down unserviceable light fitting complete all as specified and directed.
192	Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 2 core 10 sq. mm nominal cross section in service connections complete all as specified and directed.
193	Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 2 core 16 sq. mm nominal cross section in service connections complete all as specified and directed.
194	M&L for earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion, all as specified and directed. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Jammu And Kashmir Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Comprehensive Maintenance Works At Upper Drugmulla And Repair, Maintenance Of Internal Wiring At Zangli, Drugmulla And Chakkigam Under The Aor Of Ge 874 Ews., Kupwara-Jammu And Kashmir

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Comprehensive Maintenance Works At Upper Drugmulla And Repair, Maintenance Of Internal Wiring At Zangli, Drugmulla And Chakkigam Under The Aor Of Ge 874 Ews., Kupwara-Jammu And Kashmir

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us