Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 2 | S&F for Roof trusses (Framed), trussed, purlins, crane gantries, rails and fastening and heavy brackets framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats, etc. Gde Fe 410-W (Gde-E-250) quality-A complete all as specified and directed. |
| 3 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and bitumen washer incl dismantling Plain or corrugated steel/ transluscent sheeting, any gauge, thickness, including Nainital or Similar pattern roof coverings etc complete all as specified and directed. |
| 4 | M&L for preparation of new steel surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed |
| 5 | S&F of Solid PVC Wall Lining consisting of 5mm thick wood Printed PVC sheet used instead of plain colour PVC shect inclusive of solvent cement and end line L /C strip of same color and pattern and fixing at site as per specifications and drawing (approved color and shade) incl dismantling of Wall and ceiling boards (fibre, pulp, insulation, PVC etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed |
| 6 | Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar complete all as specified and directed . |
| 7 | M&L 18-20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and grinding polishing of edges or in making wash basin counter as in vertical/horizontal plateform complete all as specified and directed. |
| 8 | Taking out/ removal of settled Bricks/ Interlocking blocks any thickness (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) laid dry and pointed and stacking at site complete all as specified and directed |
| 9 | M&L for refixing of Brick/ Interlocking blocks any thickness as in pathway or hardstanding (except tiles) etc complete all as specified and directed |
| 10 | S&F machine pressed precast concrete interlocking paver block (approved shape) size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and directed |
| 11 | M&L for sand filling under floors of interlocking tiles as specified and directed. |
| 12 | M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including 20mm thick screed bed of CM 1:4 all as specified and directed |
| 13 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing outside MD land complete all as specified and directed. |
| 14 | M&L for PCC (1:3:6) type C-2 using 40 mm graded aggregate incl demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing outside MD land complete all as specified and directed. |
| 15 | M&L Providing, cement concrete 1:2:4 type B1 in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including neccessary formwork complete all as specified and directed. |
| 16 | Demolition of brick or stone masnary work built in cement mortar incl all quions, arches, pillars etc. but excluding ashlar facings dressed stone work and precast concrete articles and removing outside MD land complete all as specified and directed. |
| 17 | M&L brick work with sub class ‘B’ modular bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 all as specified and directed. |
| 18 | M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified and directed |
| 19 | Taking down cement plaster from brick or concrete surface incl raking out joints hacking for key and scrubbing down with water complete all as specified and directed. |
| 20 | Rendering 15 mm thick on fair face of brick work or concrete surfaces or stone masonry surfaces or surface in CM 1:4 using WPC finished even and smooth without using extra cement complete all as specified. Note: WPC shall be measured and paid separately under relevant item. |
| 21 | M&L for rendering 10 mm thick on brick or concrete surfaces or surface other than fair faces of brick work in cement plaster 1:6, finished even and smooth w/o using extra cement all as specified and directed |
| 22 | M&L for preparation of newly plastered or unplastered surfaces in walls soffits, facia, chajjas and applying two coat of exterior weather proof water based emulsion over a coat of compatible primer complete all as specified and directed. |
| 23 | M&L one coat of white wash including preparation of plastered/unplatered surfaces complete all as specified ans as directed. |
| 24 | M&L for preparing of plastered/unplatered surfaces of walls and applying one layer of white putty 1-2 mm and two coats of oil bound distemper over a coat of compatible primer etc complete all as specified and directed. |
| 25 | Supply only integral water proofing compound of approved make complete all as specified and as directed |
| 26 | M&L for preparation of old/ unplasterd concrete surfaces and applying one coats of synthetic enamel paint (approved color and pattern), not otherwise described, over 10cm width or girth complete all as specified and directed |
| 27 | S&F in repair 3mm thick plain/figured sheet glass fixed with oil putty, ordinary quality n exc. 0.5sqm in each pane complete all as specified. |
| 28 | S&F in repair Door closer aluminium extruded section hydraulically regulated, designation No. 3, universal type, suitable for door shutters in any width and fixed complete all as specified and directed. |
| 29 | M&L for approved colour & shade Virified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, size 1200x600mm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 incl dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) , removing serviceable tiles to store and rubish of the premisses complete all as specified and directed |
| 30 | M&L for approved colour & shade Virified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 incl dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) , removing serviceable tiles to store and rubish of the premisses complete all as specified and directed |
| 31 | M&L for non skid cramic tiles colured of size area of each tile exc 0.18 sqm but not exc 0.38 sqm in flooor and in skirting etc, jointed in neat cement slurry and pointed in white or colours cement to match complete all as specfied and directed over and including 15 mm thick screed bed in Cement Mortar 1:6 incl dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) , removing serviceable tiles to store and rubish of the premisses complete all as specified and directed |
| 32 | M&L for coloured Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular), coloured tiles, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 incl dismantling any type existing all as specified and directed. |
| 33 | M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate, including finishing of concrete topping even and rough complete all as specified and directed |
| 34 | M&L for coloured Glazed ceramic tiles in vertical surface 450 X 300 X 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to matchtiles in vertical surface including 10mm thick rendering in CM 1:4, incl dismantling of existing of any type all as specified and directed |
| 35 | Taking up or down pvc/ steel tubing of 20/25mm bore and connections all as specified and directed |
| 36 | S&F CPVC pipe 20mm dia of grade SDR-11 (class-I) including all CPVC and brass fittings fixed to wall, floor or ceiling or laid in floors etc complete all as specified and directed. |
| 37 | S&F CPVC pipe 16mm dia of grade SDR-11 (class-I) including all CPVC and brass fittings fixed to wall, floor or ceiling or laid in floors with and incl clamps etc complete all as specified and directed. |
| 38 | Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface complete all as specified and directed |
| 39 | S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron or cpvc pipe and fixed all as specified and directed |
| 40 | S&F in repair 15mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed |
| 41 | S&F in repairs 15/20mm Ball (float) valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron/pvc/cpvc pipe in water tank and fixed. (Minimum weight 25mm-455gms) complete all as specified and directed |
| 42 | S&F rotational moulded polyethylene water storage tank 500 ltrs cap cyllinderical vertical with closed top hoisted and fixed in position at roof or stand all as specified in SSR Pt-I incl dismantling of old broken water storage tank cap exc exc 250 ltrs and n exc 500 ltrs incl float valve complete all as specified and directed |
| 43 | S&F rotational moulded polyethylene water storage tank 1000 ltrs cap cyllinderical vertical with closed top hoisted and fixed in position at roof or stand all as specified in SSR Pt-I incl dismantling of old broken water storage tank cap exc 500 ltr and n exc 1000 ltrs incl float valve complete all as specified and directed |
| 44 | S&F in repair PVC water tank cover (black/white) suitable for size 500/1000 ltr capacity etc complete |
| 45 | S&F in repair Vitreous china wash hand basin (550X400mm) white, flat back excluding taps but including brackets & CP waste coupling 32mm, LDPE waste pipe 32mm upto floor trap complete all as specifed and directed. |
| 46 | S&F in repair Vitreous china under counter wash hand basin white of size 44cm (min) width, excluding taps but including brackets & CP waste coupling 32mm, LDPE waste pipe 32mm upto floor trap and including bottle traps complete fittings all as specifed and approved by GE. |
| 47 | S&F in repair Vitreous china table top wash hand basin white of size 44cm x30cm x12cm (min), excluding taps but including brackets & CP waste coupling 32mm, LDPE waste pipe 32mm upto floor trap including bottle traps complete fittings all as specifed and approved by GE. |
| 48 | S&F in repairs vitreous china Urinal half stall type with fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in white cement, with brackets, flush pipe, and union for discharge pipe, PTMT spreader and PTMT waste coupling 32mm & waste pipe, PVC Connection pipe 450mm for flushing. |
| 49 | S&F in repair vitreous china EWC single unit with F/cistern, white and trap including seat cover, fixing bolt, flush pipe, connection to drain (or out going pipe) and to flushing pipe, antisyphonage pipe, etc with all necessary fittings complete all as specified & as directed. (EWC sample shall be approved by GE before execution) |
| 50 | S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern', size 580 mm x 440 mm, white with integral foot rests, embedded and set in PCC 1:5:10 type E-2 incl flush pipe and making good to floor including removing rubbish all as specified and directed. |
| 51 | S&F in repair vitreous china EWC pedestal pattern, white and trap including seat cover, fixing bolt, flush pipe, connection to drain (or out going pipe) and to flushing pipe, antisyphonage pipe, etc with all necessary fittings complete all as specified & as directed. |
| 52 | S&F in repair fancy type 15 mm bore CP swan neck Pillar taps, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 53 | S&F in rpr CP toilet paper holder vitreous china box type white/colour complete all as spd and directed |
| 54 | M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with F32and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled F35web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate F35channel at 457 mm centre to centre and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats etc arrangement made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling sunk or raised moulding up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified |
| 55 | M&L for Anodised aluminium snap grid frame work for false ceiling and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and incl 4mm Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified |
| 56 | S&F in repairs 32mm bore LDPE waste pipe for WHB/ sink length not less than 80cm (upto trap) complete all as specified and directed. |
| 57 | S & F in repair 10 ltrs capacity PVC low level flushing cistern, of make specified with inlet, float valve and handle including bracket with 32 mm dia PVC flush pipe complete all as specified and as directed. |
| 58 | S&F fancy type 15 mm bore Pillar cock tall height, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed or in rpr complete all as specified and directed. |
| 59 | S&F in repair 15mm bore fancy type CP bib tap long body cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule complete all as specified & as directed. |
| 60 | S&F in repair 15mm bore dia Chromium plated stop valve/angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed |
| 61 | S&F in repair 15 mm bore CP Concealed Stop valves with long shank and cup fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe complete all as specified and directed |
| 62 | S&F in repair fancy type, brass CP wall mixer for mixing hot and cold water & long pipe & wall flanged screwed down for pipe of 15mm bore size complete all as approved by GE. |
| 63 | S&F in repairs PVC connection 15mm dia of length not less than 600mm with both ends, brass fly nut for water supply complete all as specified & as directed. |
| 64 | S&F in repair CP towel rail 600mm long premium quality fixed with and incl CP brass screws complete all as specified and directed. |
| 65 | S&F in repairs brass chromium plated shower rose of size minimum 200mm with swivel joint not less than 50mm dia and not less than 200mm long pipe all as specified and approved by GE. |
| 66 | S&F in repairs CP SS Soap dish premium quality, fixed to wall with plugs and screws complete all as specified and directed. |
| 67 | S&F in repair CP two way tap 15mm dia all as specified and directed. |
| 68 | S&F in repair CP Health faucet (ABS Body) suitable for 15mm dia pipe with approx 1.00m long flexible steel tube and ABS wall hook incl making connections and fixed in position complete in all respect as specified |
| 69 | S&F in repair Urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms). |
| 70 | S&F in repair 600mmx450mm Looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed |
| 71 | S&F in repair Looking mirror glass of selected quality 2.4mx 0.60m approx size , framed with plain PVC or wood strip and mounted on wood sheet and fixed with screws all as approved by GE. |
| 72 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n exc 2.0 sqm each complete all as specified and directed. |
| 73 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sqm each complete all as specified and directed. |
| 74 | Taking down Shutters of any description exc 1 sq m but n exc 2 sqm each complete all as specified and directed |
| 75 | Taking down and refixing Shutters in same opening after adjusting the size, of any description exc 1 sq m but n exc 2 sqm each incl all necessary fittings complete all as specified and directed |
| 76 | M&L for Pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed |
| 77 | S&F in rpr factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction ofEngineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).→Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall beacceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 78 | M&L for cement concrete 1:2:4 type C-1 using 20 mm graded stone aggregate for fixing hold fast, coping, cills and filling in pressed steel door frames including plastering, painting and finishing the surfaces to match with existing surface complete all as specified and directed. |
| 79 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm sizecomprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 600 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size withnecessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 80 | S&F 30mm thick second class hard wood factory made glazed and Skelton door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note: - Size of member of shutters as specified in SSR Part-I 1991 section 8 clause 8.24 (a) complete all as specified and directed |
| 81 | S&F solid PVC door frame(approved color) of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, fixing in opening as per specification and drawing complete all as specified and directed. |
| 82 | S&F Factory made solid panel PVC door shutter(approved color and pattern) 30mm thick (stiles) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap inserted for top rail and bottom rail. Penelling of plain colour PVC sheet to be fitted to the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site all as specified and directed. |
| 83 | Supply only galvanised mild steel wire clothes 0.46 mm nominal dia of wire and average width of aperture 1.4 mm complete all as specified and as directed . Note : Fixing only rate is included in window/door shutter item considered therein. |
| 84 | S & F 100mm size Butt hinges, medium weight cold rolled, stainless steel and fixed complete all as specified and as directed. |
| 85 | S&F Aluminum tower bolts of extruded section of size 100mm all as specified and directed. |
| 86 | S&F 150 mm size Extruded aluminium alloy handles, fabricated type., anodised handles all as specified and directed. |
| 87 | S&F 300mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 88 | M & L preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 89 | S&F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of tinned tacks, or galvanised wire staples complete all as specified and as directed . |
| 90 | S&F 150 mm size Extruded aluminium alloy handles, fabricated type., anodised handles all as specified and directed. |
| 91 | S&F in repair corner glass shelf made out of 5mm thick glass of Approx size 200x200mm round edge provided with SS railing fixed to wall using 2 No SS bracket complete all as approved by GE. |
| 92 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard with SS railing fixed to wall using 2 No SS bracket complete all as approved by GE. |
| 93 | S&F in repair Door closer Aluminium (extruded section body) hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed. |
| 94 | S&F in repair 110mm dia PVC (SWR) pipe and single socketed in any length with rubberring jointlai in trenches, floors or fixed to walls incl fittings like bends, elbow etc required complete all as directed. |
| 95 | S&F in repair 12mm thick toghened plain/frosted glass pane fixing as door/ windows or partition with rubber gasket , glazing clips and bedding and necessary fittings i.e fancy type handle (not less than 300mm) minimum two handles per shutter, locking arrangement with key etc complete all as specified and directed |
| 96 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including neccesary cutting and holes for glass/ aluminum doors all as specified and directed |
| 97 | S&F in repair mild steel Mortice lock 4 lever, vertical type, size 100 mm for aluminum doors complete all as specified and directed |
| 98 | Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 99 | S&F Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ E122 including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, aluminum snap beading screws etc. complete all as specified |
| 100 | S&F Powder coated aluminium window and ventilator shutters, 3 track sliding type (2 track for glass and 1 track for jalli), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 101 | S&F Anodised aluminium ventilator shutters, fixed type aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified |
| 102 | S&F 4.8 mm thick tinted sheet glass for fixing in window or door shutter, ordinary quality exc. 0.5sqm in each pane complete all as specified and directed. |
| 103 | Taking down carefully copper/aluminium point wiring from wooden battan/ conduits or from the wall by chasing/cutting (light, fan, socket or power) completely including fittings (such as switches, ceiling roses, pendants, regulator, sockets etc) and making good disturbed surfaces of walls, floor etc. |
| 104 | Taking down old DBs including existing MCCBs,MCB TPN and connected items of any make and type from the site and making good surface complete all as specified and directed. |
| 105 | Taking down old submain wiring of any size and make from the site and making good surface complete all as specified and directed. |
| 106 | Taking down old unsv light fitting,Security light ,bulb of any size and make from the site and making good surface complete all as specified and directed. |
| 107 | M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including rigid PVC conduit FRLS, medium grade ,ISI marked ,terminal box of 1.6 mm thick and its also including various sizes of module frame, plates in gray/white colour also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly complete all as speccified and as directed |
| 108 | One light/fan point controlled by one way switch ( switch to be measured and paid separtely) |
| 109 | One 5 A socket outlet on same board. |
| 110 | One light point controlled by two way switch. |
| 111 | One 5 pin socket outlet 5 hole 5 Amp independent including PVC unsheathed copper conductor 1.5 Sqmm cable as earth wire connected to common earth and to earth dully socket & switches to be measured and paid separately. |
| 112 | ditto as item no-107.04 but copper conductor 2.5 sqmm for 15 amp socket outlet. |
| 113 | ditto as item no-107.04 but copper conductor 4.00 sqmm. |
| 114 | S & F in repair incl making existing surface good sheet metal enclosures with socket plug top and MCB's with two pin and earth plug and socket complete with one single pole MCB 240 V grade 20 Amp.(AC Box) complete all as directed by EIC. |
| 115 | S & F in repair of modular switch single pole one way 6 Amps, 1 module ISI marked complete all as specified and directed by EIC. |
| 116 | S & F in repair of modular socket single pole one way 6 Amp-2/3 pin, 2 module ISI marked complete all as specified and directed by EIC. |
| 117 | S & F in repair of modular switch single pole one way 16 Amps, 1 module ISI marked complete all as specified and directed by EIC. |
| 118 | S & F in repair of modular socket single pole one way 16 Amp-2/3 PIN, 2 module ISI marked complete all as specified and directed by EIC. |
| 119 | S & F of modular switch socket combination 16A (with gang box where is required), 6 pin, 3 module, ISI marked complete all as directed by EIC. |
| 120 | S & F in repair of modular bell push 6A, 1 module ISI marked complete all as specified and directed by EIC. |
| 121 | S & F in repair of switch piano type flush type single pole one way 5 Amps, ISI marked complete all as directed by EIC. |
| 122 | S & F in repair of socket outlet 5 pin flush 6 Amp multi pin 2/3 pin complete all as directed by EIC. |
| 123 | S & F in repair of switch socket combined outlet 6 pin flush 16 Amp multi, ISI marked complete all as directed by EIC. |
| 124 | S & F in repair of switch piano type/flush button type single pole two way 5 Amps front operated ISI marked complete all as directed by EIC. |
| 125 | S & F in repair of multi music call bell ISI marked complete all as specified and directed by EIC. |
| 126 | S & F in repair of call bell Ding Dong ISI marked complete all as specified and directed by EIC. |
| 127 | S & F in repair of bell push flush type SP 5 Amp complete all as specified and directed by EIC. |
| 128 | S & F in repair of lamp holder , PVC/Poly carbonate type with back plate suitable for batten fittings complete all as directed by EIC. |
| 129 | S & F in repair of 3 pin plug top AC-230V, 6 Amp complete all as directed by EIC. |
| 130 | S & F in repair of 3 pin plug top AC-230V, 16 Amp complete all as directed by EIC. |
| 131 | S&F in repair ceiling rose, 3 phase/PVC/Polycarbonate, isolated body complete all as specified and directed by Engr-in- charge. |
| 132 | S & F in repair of High lam sheet cover ISI marked with required Nos of space for switches/ Sockets/ Regulator of size 250x280mm complete all as directed by EIC. |
| 133 | M & L Submain wiring with three run single core 10 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 volts grade in concealed New PVC conduit 25 mm dia ISI marked alongwith one run of 10 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main DB and testing on completion etc complete all as directed. Note: Three runs of 10 sqmm cable and one run of PVC conduit shall be measured as one RM. |
| 134 | M & L Submain wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 volts grade in concealed New PVC conduit 25mm dia ISI marked alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main DB and testing on completion etc complete all as directed. Note: Three runs of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. |
| 135 | Material & Labour for sub main wiring with two run of 4 sqmm size PVC insulated multi stranded copper conductor fire retardanr cable (Nominal area) and one run of 4 sqmm size PVC insulated unsheathed solid core copper conductor cable drawn in either existing or new surface/ recessed steel/ PVC conduit/ PVC casing capping of required size complete all as directed by EIC. Note: Three runs of 4 sqmm cable and one run of PVC conduit shall be measured as one RM. |
| 136 | Material & Labour for sub main wiring with two run of 2.5 sqmm size PVC insulated multi stranded copper conductor fire retardanr cable (Nominal area) and one run of 2.5 sqmm size PVC insulated unsheathed solid core copper conductor cable drawn in either existing or new surface/ recessed steel/ PVC conduit/ PVC casing capping of required size complete all as directed by EIC.Note: Three runs of 2.5 sqmm cable and one run of PVC conduit shall be measured as one RM. |
| 137 | M & L for PVC insulated aluminium service cable un-armoured 2.5 sqmm 2 core with ISI marked complete all as specified and directed by EIC. |
| 138 | S & F inverter type LED bulb 12 watt with very high efficiency suited for installation in existing lamp holders, complete all as as directed by EIC. |
| 139 | S & F in replacement of LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics,mutlti/natural colour LED flood light with cast aluminium housing, toughened glass cover, high efficient LED and wired with all accessories and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp,complete all as as specified and directed by EIC. |
| 140 | S & F in replacement LED batten luminaire surface/wall mounted ,4 feet 20 Watts comprise of aluminium extruded with anodised with powder coated in white colour with decorative end cap. The luminare is pre-wired with high efficiency electronic driver, with lifetime of 50000 burning hours . CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6000 to 6500K, surge protection DM-4KV & CM-3KV, IP-40 protected, meets LED IS specifications, Class -1, Short circuit and over circuit protection, voltage range - 140 to 300 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 120 lm/w, filiker free and including connecting up with PVC sheathed suitable size copper conductor with push type cable connector 2/3 pin cable connector from ceiling rose to fitting fixed with 2 years of replacement warranty on fittings complete all as specified and directed by EIC. |
| 141 | S & F in replacement LED batten luminaire surface/wall mounted, 2 feet 10 Watts comprise of aluminium extruded with anodised thermally conductive material with powder coated in white colour with decorative end cap. The luminare is pre wired with high efficacy electronic driver, with lifetime of 50000 burning hours . CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6000 to 6500K, surge protection DM-4KV & CM-3KV, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 140 to 300 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 120 lm/w, filiker free and including connecting up with PVC sheathed suitable size copper conductor with push type cable connector 2/3 pin cable connector from ceiling rose to fitting fixed with 2 years of replacement warranty on fittings complete all as specified and directed by EIC. |
| 142 | S&F 30 W High efficient LED Street light fitting with pressure die cast Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie should more than 110lm/W. The color temperature is 6000 to 6500 K with a color rendering index of 70. The luminaire is IP:66 protected/weather proof/ water resistant. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<10%, High and low protection along with a surge protection of 4 KV including provision of suitable dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on wall fixed complete as specified and directed by EIC. |
| 143 | S & F in replacement Recess/ceiling mounting as suitable in existing fitting ultra slim 36 W LED 2x2 edge-lit tile in Aluminium Extruded housing with full opal diffuser suitable for perfect lighting conditions for most varied visual tasks in offices and general areas complete all as specified and directed. |
| 144 | S&F in replacement of new genration post top lanterns, IP-65 elegantly designed spun alumnium and high grade aluminium heat sink for efficient thermal management, sturdiness and excellent corrosion resistance. MS base provided to support the housing, environmental friendly long life high power LED light 25 watt complete all as directed by EIC . |
| 145 | S & F in repair incl taking down of 15 W LED Recess/surface mounted downlighter (squrae/round shape) with pressure die-cast aluminium heat sink & PC diffuser in white powder coated finish with integrated driver complete all as directed by EIC. |
| 146 | S & F in repair incl taking down of 18 W LED Recess/surface mounted downlighter (squrae/round shape) with pressure die-cast aluminium heat sink & PC diffuser in white powder coated finish with integrated driver complete all as directed by EIC. |
| 147 | S & F in repair incl taking down of 20 W LED Recess/surface mounted downlighter (squrae/round shape) with pressure die-cast aluminium heat sink & PC diffuser in white powder coated finish with integrated driver complete all as directed by EIC. |
| 148 | Taking down stage lights from the height of 40 ft, Replacement & refixing of Halogen bulb, LED bulb, LED Driver etc including all connected items , complete all as specified and directed by Engr-in-charge. Note:- (a) Contractor to make own arrangement of ladder and all required equipment for taking down and fixing. (b) Items required for repair/maint will be measured and paid separately. |
| 149 | Supply and fix LED driver for stage light (as reqd at site) |
| 150 | Supply and fix Halogen bulb (as reqd at site) |
| 151 | Supply and fix LED plate (as reqd at site) |
| 152 | Labour charge for taking down and refixing of LED plate & stage lights upto height 40 feet per light |
| 153 | Commissioning charges (Programming of stage lighting system with dimmer control ) per LED driver |
| 154 | S&F in repair of Aluminium strip 25 x 3.15 mm with saddles and fixing screws etc for roof conductors and down conductors along with suitable insulator above ground complete all as specified and directed |
| 155 | S&F in repair of air termination, single pointed, Copper rod 12 mm dia and 300 mm long complete all as specified and directed. |
| 156 | M&L for Test point terminal block made of gun metal or phosphorus bronze Size 75 x 75 x 25mm, drilled and screwed including 3 Nos 8 mm dia 25 mm long hex head screw complete all as specified and directed. |
| 157 | M&L for HDPE pipe of 32 mm dia, cut to Size all as required at Size including fixing arrangements and providing appropriate Size insulators to insulate pipe from foundation or air termination from pipe complete all as specified and directed. |
| 158 | M&L for clamps, bracings, supports and back plates made out of structrural steel sections including nuts, bolts and washers all as required at size for fixing GI tubing in truly vertical position including two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 159 | M&L for plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate in foundtion of pole/stay assembly etc including necessary form work with two coat of lime wash wherever applicable, complete all as specified and directed |
| 160 | S&F sheet metal enclosure for VT DB TPN, MCCB DB TPN 4 way, with 200 A rated bus bar, double door with 100 Amp,25 KA,TP MCCB as incomer (Vertical type double door,100 Amps MCCB rate inclusive) 150 Amp rated bus-bar and suitable for SP/TP DB in outgoing, enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 including wooden rectangle board of first quality of suitable size for mounting of DB box with provision for 4 Pole MCCB* as incomer and SP/TP MCB's as outgoings complete all as specified and directed. |
| 161 | S&F in repair of SPN DB 12 way with 200 Amp rated bus bar, IP 43, ISI marked acrylic double door complete all as directed by EIC. Note: - Contractor must provides IP43 certificate. |
| 162 | S&F in repair of SPN DB 8 way with 200 Amp rated bus bar, IP 43, ISI marked acrylic double door complete all as directed by EIC. Note: - Contractor must provides IP43 certificate. |
| 163 | S & F in repair amp rating 240V 10 KA'B' curve MCB SPN 32-40 A current currying capacity in the MCB DB complete with connection testing and commissioing complete all as specified and directed by EIC |
| 164 | S & F in repair of MCB TPN 40 to 63 Amps, 415 V with thimble suitable for existing wires complete all as directed by EIC. |
| 165 | S & F in repair amp rating 240V 10 KA'B' curve MCB SP 6-32 Amp current currying capacity in the MCB DB complete with connection testing and commissioing complete all as specified and directed by EIC. |
| 166 | S & F in repair 100 A MCCB 4 pole, 16 kA breaking capacity, 415 V (Ics=100% Icu ) with suitable thimbles all as specified and directed by EIC |
| 167 | S & F in repair 63 A MCCB 4 pole, 16 kA breaking capacity, 415 V (Ics=100% Icu ) with suitable thimbles all as specified and directed by EIC |
| 168 | M&L earthing complete with GI electrode 600x 600 x 6mm, thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below normal ground level (with top edge of earth plate not less than 1.50 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia lead by means of bolt nuts, check nuts, and washers of brass connected including gun metal or phosphorus bronze of sixe 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25 mm long hexagonal head screwed all as specified including excavation and earth work and disposal of surplus soil incl 40 mm GI tubing light grade and necessary fitting for protection of GI strip incl laying of charcoal dust and common salt PPC (1:2:3) type C-1 (using 20mm graded stone aggregate) for earth pit with 40 x 40 x 6mm MS angle iron frame for cover 40 mm thick (1:2:4) type B20 using 12.5 mm graded stone aggregate reinforced with 8 mm dia round bar @ 75mm C/C both way with MS handle 20mm dia plastering 15mm thick CM (1:6) internally and upto 150mm below ground level externally PGL funnel with ground wire mesh 20mm dia Med grade GI pipe for watering complete all as shown on electrical plate No 3 of SSR Part-1 2009 and connected in earth test incl testing completed all as specified and directed. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
| 6 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
