|
| 1 | Taking down cement plaster of any description incl Terrazo finish as in dado/ skirting of any description on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 2 | M&L for 15 mm thick rendering in cement plaster 1:4 on fair face of brick/concrete/stone masonry surfaces including finishing the surfaces even and smooth (without using extra cement) incl mixing with integral water proofing compound complete all as specified and directed. Note:- Integral water proofing compound will be measured and paid separately. |
| 3 | Supply only Integral water proofing compound complete all as specified and directed. |
| 4 | M&L for 10 mm thick rendering over fair face or other than fair face brick or concrete surface in cement plaster 1: 6 finishing the surfaces fair & even without using extra cement complete all as specified and directed. |
| 5 | M&L for 5 mm thick rendering over fair face brick or concrete surface in cement plaster 1: 3 finishing the surfaces fair & even without using extra cement on ceiling complete all as specified and directed. |
| 6 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces |
| 7 | M & L for preparing newly plastered surface of walls/ any surface with preparing surface and applying two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification incl over a coat of waterproof putty complete all as specified and as directed. Note: M&L for Putty work shall be measured and paid for seperately under respective items. |
| 8 | M&L for applying 2-3 mm thick white wall putty on walls complete all as specified and directed. |
| 9 | M & L for preparing old or new surface of ceiling and applying two coat of white wash on ceiling complete all as specified and as directed. |
| 10 | Taking down existing water proofing treatment of any description incl PCC padding, cement plaster any thickness from roof surfaces, cleaning of roof and prepairing it for further treatment incl making good necessary dubbing out wherever required and removing rubbish from site complete all as specified and directed. |
| 11 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and over Applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces, Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 incl Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) , 40mm thick incl platering 15mm thick cement plaster in CM 1:4 finished even and fair complete. |
| 12 | M&L for Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges type B0 12.5mm graded aggregate complete |
| 13 | Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed |
| 14 | Taking down chowkhats or frame exc 1.5 sqm but n exc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 15 | S&F for powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specifiedcomplete all as specified and as directed. (minimum thickness of powder coating 50 micron) |
| 16 | Supply and fixing powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, aluminum snap beading screws etc. and including ACB panel/board approx 8-10mm thick complete all as specified and directed. |
| 17 | Supply and fixing powder coated aluminium window and ventilator shutters, three track sliding window shutter, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws etc. complete all as specified |
| 18 | Sheet glass 4-5 mm thick in door window ventilator or where required with glazing or with oil putty complete all as directed. |
| 19 | Supply only galvanised mild steel wire clothes 0.46 mm nominal dia of wire and average width of aperture 1.4 mm complete all as specified and as directed . Note : Fixing only rate is included in window/door shutter item considered therein. |
| 20 | M&L for Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling sunk or raised moulding up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame fixed or laid/ inserted to timber/GI/Aluminium framework with screws incl two coat of OBD over a coat of primer and incl Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with F32 and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled F35 web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate F35 channel at 457 mm centre to centre and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats etc arrangement made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and incl with approved patterns/design/ cornices etc complete all as specified and approved by GE. |
| 21 | M&L for Anodised aluminium snap grid main T, cross T and secondary intermediate T of size 15*32mm approx frame work for false ceiling and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and incl approx 4mm glass reinforced gypsum false ceiling with connected accessories fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as directed by GE. |
| 22 | S&F 12 mm thick toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required incl fixing of pivot hinges, handles, locking arrangement if required incl any fiitings like machine/pivot hinges etc required for smooth functioning complete all as directed. |
| 23 | S&F 50mm dia wooden, polished, hard wood knobs fixed with screws complete all as directed |
| 24 | S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers for curtains etc. complete |
| 25 | S&F mild steel, magnetic catches for cabinets of size 50mm complete with striking plate & magnetic stud complete all as per approved sample etc. complete fittings |
| 26 | S&F approx 350mm long SS telescopic channel fixed in sliding drawer with necessary screws complete all as specified and directed as per approved samples complete all as directed |
| 27 | S&F 100mm size extruded brass handles fabricated type polished complete all as specified and directed by Enge-in-Charge |
| 28 | S&F 12mm thick WPC, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as directed |
| 29 | Extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick 12 mm wide fixed with nails complete |
| 30 | M&L for granite (any type) 18-20 mm thick machine cut in steps, jambs, cooking platform , window cills and similar works including 15mm thick screed bed in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone inlcuing grinding and polishing types complete all as specified and directed. |
| 31 | S&F in repairs brass chromium plated shower rose with swivel joint not less than 200 mm dia and not less than 200mm long arm all as specified and directed. |
| 32 | Demolition of brick work, built in Cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 33 | M&L for brick work with fly ash bricks (modular size bricks), straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed. |
| 34 | Dismantling of stone slabs and tiles of any description or thickness in floors & aprons etc laid over bedded and pointed in any mortar complete all as specified and directed. |
| 35 | M&L for vitrified ceramic tiles of dark shade 8 to 10 mm thick (square/rectangular) of size 600 mm x 600 mm as in floors/ skirtings etc. over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles, complete all as specified and directed. |
| 36 | M&L for coloured tiles in vertical surface 450X300X7mm thick set and jointed over and including 10 mm thick rendering even and rough in CM 1:3 for backing of tiles, jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed. |
| 37 | M & L for Non-Skid coloured ceramic tiles 7 to 8 mm thick joint free, (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding screed bed 15 cm in CM (1:6) complete all as specified and directed. |
| 38 | S&F in repair brass mortice lock 4 levers vertical type size 100mm complete all as specified and directed |
| 39 | S & F aluminium extruded body door closer hydrulically regulated , designation no 3 universal type, suitable for door shutter all as specified and directed |
| 40 | Dismantling water tank capacity exc 500 ltrs but nexc 1000 ltrs and removing to stores complete all as specified and directed |
| 41 | S&F 1000 Ltr rotational moulded polyethylene water stotage tanks incl ball valve (cylinderical verticle with closed top) hoisted & fixed in position Incl Ball brass valves of 20 mm, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 42 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 43 | M&L for hardcore of broken stone or boulders of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed. |
| 44 | M&L for PCC in 1:4:8 type D2 (using 40mm graded aggregate) 100 mm thick as in sub base of hardstanding and finishing cement concrete surface even & rough complete all as specified and directed. |
| 45 | M&Lfor sand cushioning for laying of Interlocking paver block complete all as specified and directed. |
| 46 | M&L for PCC TypeB0 1:2:4 12.5mm graded , Providing, cement concrete in roof kerbs or mud stops or in coping or in similar wks, rounded or chamfered on edges complete all as direcetd. |
| 47 | M&L for machine pressed precast concrete interlocking paver block reflective type(glossy finish and Rubber Moulded) any shape and size of 60 mm thick, M-35 Grade with grey cement and pigments to match with existing complete all as specified and directed. |
| 48 | S&F in repairs Vitreous China wash basin, white, flat back, size 580x450irun but including brackets including coupling and waste pipe and Bottle trap of PTMT and Bore 32 mm having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and directed by Engr- in- Charge. |
| 49 | S&F 15 mm Brass wash basin mixer, centre hole, mixing hot & cold water, fancy type, with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe etc and fixed in repairs complete all as specfied and directed by Engr- in- Charge. |
| 50 | S&F in repairs vitreous china wash down water closet 1st quality with seat cover and trap incl connection to drain pipe or outgoing pipe and flushing pipe etc complete, waste pipe, sheet covers & fittings (complete set) and fixing complete all as per manufacturer instructions and as directed by Engr-in-Charge. |
| 51 | S&F in rpr Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 52 | S&F in repairs 15 mm bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed in repairs complete all as specified and directed. |
| 53 | S&F in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 54 | S&F in repairs Toilet paper roll holder chromium plated fixing complete all as specified and directed by Engr in charge. |
| 55 | S&F in repairs cabinet looking mirror approved quality of size 0.45x0.60m approx with wall partition inside complete with polishing fixed with screws to wall, complete all as specified and Approved by GE. |
| 56 | S&F in repairs chromium plated/SS grating slit 150 mm dia with or without waste hole complete all as specified and directed. |
| 57 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 600 mm fixing complete all as specified and directed by engr in charge. |
| 58 | M&L PVC (SWR) floor trap plain with grating incl jointing with solvent cement 75 mm bore complete all as specified and direcetd. |
| 59 | S&F in repairs 15 mm bore stop cock,(angle valve) cast copper alloy, fancy type, chromium plated, screwed down, high pre-ssure screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 60 | S&F in repairs 15 mm bore Bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed. |
| 61 | S&F in repairs 15 mm bore stop cock, cast copper alloy, chromium plated with long shank and cut, screwed down, screwed for iron pipe or union complete as specified and directed. |
| 62 | Taking up or down 20 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 63 | Supplying and laying 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified with all necessary fittings and fixed complete to wall and ceiling or laid in floors (concealed type) complete all as specified and directed. |
| 64 | Taking up or down 15 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 65 | Supplying and laying 16 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified with all necessary fittings and fixed complete to wall and ceiling or laid in floors (concealed type) complete all as specified and directed. |
| 66 | M&L for cement concrete Type B1 1:2:4(20mm graded aggregate) as in, cover slabs, , set in CM 1:6 complete all as specified and directed. |
| 67 | S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed / laid in trenches/floors with necessary fittings etc complete in floors/walls fixed complete all as specified and directed. |
| 68 | S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in walls / laid in trenches/floors with necessary fittings etc complete fixed with MS clamp complete all as specified and directed. |
| 69 | M&L for preparation of new/old or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of synthetic enamel paint over a coat of zinc chrome primer, complete all as specified and directed. |
| 70 | Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced) complete all as specified and directed. |
| 71 | M & L PCC (1:3:6) type C-2 using 40mm graded stone aggregate 75 mm thick as in plinth protection and similar works finished fair even laid in bays n.exc 2m in length and joints filled with bitumen mastic 1:3 complete all as specified and directed |
| 72 | S & F in rpr 10 ltrs capacity PVC low level flushing cistern, of make specified with inlet, float valve and handle including bracket with 32 mm dia PVC flush pipe complete all as specified and as directed. |
| 73 | S&F in repairs 15 mm SS Pillar taps of any colour high pressure screwed for iron pipe and fixed all as specified and directed. |
| 74 | M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame asper specification and drawing |
| 75 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and Prelam PVC Sheet on both side PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; both sidePrelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 76 | S&F for 150 mm Aluminium handles, cast type, anodised, complete all as specified and directed |
| 77 | S&F 150 mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed and fixed complete all as specified and directed. |
| 78 | S&F 100 mm Butt hinges, extruded brass ISI marked, compound complete all as specified and directed. |
| 79 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete |
| 80 | Taking down carefully copper/aluminium point wiring from wooden battan/ conduits or from the wall by chasing/cutting (light, fan, socket or power) completely including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc) and making good disturbed surfaces of walls, floor etc complete all as directed by EIC. |
| 81 | Taking down old DBs including existing MCCBs and connected items of any make and type from the site and making good surface complete all as specified and directed by EIC. |
| 82 | Taking down old submain wiring of any size and make from the site and making good surface complete all as specified and directed by EIC. |
| 83 | Taking down old unsv light fitting,Security light ,bulb of any size and make from the site and making good surface complete all as specified and directed by EIC. |
| 84 | M&L for point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including rigid PVC conduit FRLS, medium grade ,ISI marked ,terminal box of 1.6 mm thick and its also including various sizes of module plates in gray colour also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly complete all as speccified and as directed by EIC. |
| 85 | One light/Ceiling fan/Exhaust fan point controlled by one switch. |
| 86 | One light point controlled by two way switch |
| 87 | One 3 pin socket outlet on same board. |
| 88 | One bell point controlled by bell push switch. |
| 89 | One 5 pin socket outlet 5 hole 5 Amp independent including PVC unsheathed copper conductor 1.5 Sqmm cable as earth wire connected to common earth and to earth dully socket & switches to be measured and paid separately. |
| 90 | -ditto- as above item No 84.05 but copper conductor 2.5 sqmm for 15 amp socket outlet. |
| 91 | One power point with insulated stranded copper conductor cable 4 Sqmm single core and PVC insulated FRLS 1100 Volts unsheathed copper conductor 4 Sqmm stranded conductor as earth wire connected to dolly complete all as directed by EIC. |
| 92 | S & F in replacement of modular switch single pole one way 6 Amps, 1 module ISI marked complete all as specified and directed by EIC. |
| 93 | S & F in replacement of modular socket single pole one way 6 Amp-2/3 pin, 2 module ISI marked complete all as specified and directed by EIC. |
| 94 | S & F in replacement of modular switch single pole one way 16 Amps, 1 module ISI marked complete all as specified and directed by Engr-in-charge. |
| 95 | S & F in replacement of modular socket single pole one way 16 Amp-2/3 PIN, 2 module ISI marked complete all as specified and directed by EIC. |
| 96 | S & F in replacement of modular two way switch 6 Amps, 1 module ISI marked complete all as specified and directed by EIC. |
| 97 | S & F in repair of modular bell push ISI marked complete all as specified and directed by EIC. |
| 98 | S & F in repair of multi music call bell ISI marked complete all as specified and directed by EIC. |
| 99 | S & F incl making existing surface good sheet metal enclosures with socket plug top and MCB's with two pin and earth plug and socket complete with one single pole MCB 240 V grade 16 Amp.(A/C Box) complete all as specified and directed by EIC. |
| 100 | S & F incl making existing surface good sheet metal enclosures with socket plug top and MCB's with two pin and earth plug and socket complete with one single pole MCB 240 V grade 20 Amp.(A/C Box) complete all as specified and directed by EIC. |
| 101 | S & F Modular TV Socket incl 10 mtr Disc wire complete all as specified and directed by EIC. |
| 102 | S & F Modular telephone socket incl 10 mtr Disc wire complete all as specified and directed by EIC. |
| 103 | Taking down any type of Ext fan, ceiling fan cable end, dismantling blades and removing fan and blades to E/M store |
| 104 | S & F ceiling fans complete with blades, down rods, electronic regulator 2 module and accessories, 230 V, 1200 mm sweep min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all specified and directed by EIC. |
| 105 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed by EIC. |
| 106 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed by EIC. |
| 107 | S & F in replacement LED batten luminaire surface/wall mounted ,4 feet 20 Watts comprise of aluminium extruded with anodised with powder coated in white colour with decorative end cap. The luminare is pre-wired with high efficiency electronic driver, with lifetime of 50000 burning hours . CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6000 to 6500K, surge protection DM-4KV & CM-3KV, IP-40 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 140 to 300 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 120 lm/w, filiker free and including connecting up with PVC sheathed suitable size copper conductor with push type cable connector 2/3 pin cable connector from ceiling rose to fitting fixed with 2 years of replacement warranty on fittings complete all as specified and directed by EIC. |
| 108 | S & F in replacement LED batten luminaire surface/wall mounted ,2 feet 10 Watts comprise of aluminium extruded with anodised with powder coated in white colour with decorative end cap. The luminare is pre-wired with high efficiency electronic driver, with lifetime of 50000 burning hours . CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6000 to 6500K, surge protection DM-4KV & CM-3KV, IP-40 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 140 to 300 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 120 lm/w, filiker free and including connecting up with PVC sheathed suitable size copper conductor with push type cable connector 2/3 pin cable connector from ceiling rose to fitting fixed with 2 years of replacement warranty on fittings complete all as specified and directed by EIC. |
| 109 | S&F in replacement of LED Building security light fitting 30W new generation energy saving and environmental friendly long life made up of pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC cover in the front and lens for batwing likght distribution or having TOP opening seprate driver compartment with IP 66 protection and impact resistance of IK07 for mounting existing bracket complete including all accessories pre-wired with 3 X 1.5 sqmm single core multistranded copper conductor cable up to celing rose/ terminal box and proper earthing connection must be provided, all as specified and directed by EIC. |
| 110 | S & F in replacement Recess/surface mounting (worm white/natural white as required at site) as suitable in existing fitting ultra slim 36 W LED 2x2 edge-lit tile in Aluminium Extruded housing with full opal diffuser suitable for perfect lighting conditions in general areas complete all as specified and directed by EIC. Make Havells, Orient, |
| 111 | S & F in replacement Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body complete all as specified and directed by EIC |
| 112 | M & L Submain wiring with two run single core 10 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 volts grade in concealed New PVC conduit 25 mm dia ISI marked alongwith one run of 10 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main DB and testing on completion etc complete all as directed. Note: Three runs of 10 sqmm cable and one run of PVC conduit shall be measured as one RM. |
| 113 | M & L Submain wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 volts grade in concealed New PVC conduit 25mm dia ISI marked alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main DB and testing on completion etc complete all as directed. Note: Three runs of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. |
| 114 | M&L for sub main wiring with two run of 4 sqmm size PVC insulated multi stranded copper conductor fire retardanr cable (Nominal area) and one run of 4 sqmm size PVC insulated unsheathed solid core copper conductor cable drawn in either existing or new surface/ recessed steel/ PVC conduit/ PVC casing capping of required size complete all as directed by EIC. Note: Three runs of 4 sqmm cable and one run of PVC conduit shall be measured as one RM. |
| 115 | S&F in repair of VTPN MCCB DB 4 way, with 200 A rated bus bar, double door with cement spill protector including 100 Amp,25 KA,4P MCCB (Ics=100% Icu)as incomer (adjustable thermal and fixed magnetic release), 200 Amp rated bus-bar and suitable for SP/TP DB in outgoing, enclosure made up of CRCA sheet steel, RAL 9003 powder coated, ISI marked complete all as specified and directed by EIC. Note: - Contractor must provides IP43 certificate. |
| 116 | S&F in replacement of SPN DB 12 way with 200 Amp rated bus bar, IP 43, acrylic double door complete all as directed by EIC. Note: - Contractor must provides IP43 certificate. |
| 117 | S & F in replacement of amp rating 240V 10 KA'B' curve MCB SPN 40 A current carrying capacity in the MCB DB complete with connection testing and commissioing complete all as specified and directed by EIC |
| 118 | S & F in replacement of MCB single pole 6 to 32 Amps 240 V with thimble suitable for wires complete all as directed by EIC. |
| 119 | Supplying laying in trenches and fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing LT Cross Linked Polythene Insulated(XLPE insulated) galvanized steel strip armored electric cable 1100 volt grade heavy duty ISI marked with aluminium conductor and overall served with an outer sheath of PVC, of cross sectional area including cable glands made out of finned brass double compression type of size 35 Sqmm 3.5 Core. Note :- Excavation/road cutting, earthwork, Sand Cushioning, Cable covers, Pipe for cable protection to be measured and paid for separately. |
| 120 | Excavation or road cutting in trenches not exc 1.5m wide and not exc 1.5M depth for laying of cable, getting out including forming bottom surface to required level and gradient in hard/dense soil.complete all as specified and directed. |
| 121 | M&L for Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in hard/dense soil. complete all as specified and directed. |
| 122 | Removing excavated material/ soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and directed. |
| 123 | M & L for sand cushioning with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as specified and directed.Note : Punned thickness only shall be measured and paid. |
| 124 | Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1 with peak, size 250mm x 150mm x 40mm complete all as specified and directed by EIC. |
| 125 | Earthing complete with galvanised iron earth plate electrode 60cm x 60cm x 6mm thick , burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised steel wire 4 mm dia by means of galvanised nuts, bolts, check nuts and washers including excavation and earth work, with precast PCC 1:3:6 type C-2 pit, PCC pit cover 1:2:4 type B-1 with handle, GI protection pipe 15 mm bore light grade and 20 mm medium grade GI watering pipe, Funnel , wire mesh etc complete as shown in electrical Plate No.3 of SSR Part-I connected to earthing test point and metal part all as specified including testing on completion complete all as directed by EIC. Please Enable Macros to View BoQ information |
