|
| 1 | Taking down chowkat or frame with shutter (without taking off shutters from the frames) area not exceeding 1.5 Sq mtr each. |
| 2 | Taking down chowket or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each. |
| 3 | Taking down Shutter of any description area exc. 1 sqm and not exc . 2 sqm each. |
| 4 | M&L for 35mm thick second class hardwood glazed and skelton door shutters (Three panels) open rebated and prepared to receive glass / gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sash bars size of members of shutter as specified in SSR Part-I section 8, clause 8.24 (a) complete as spfd and directed. |
| 5 | M&L for 30 mm thick Flush shutters, solid core construction, with block board core plywood face panels on both side, commercial type on both sides including 5 mm thick edging/beading on exposed to view on sides & top complete as spfd and directed. |
| 6 | S&F mortise door lock handle set 200mm 1CK gloria 7 pin brass tumbler mechanism 60 mm all as spfd and directed. |
| 7 | M & L for 0.9mm thick decorative laminate(mica) type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions as spfd and directed. |
| 8 | M&L for 18 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces ; fixed with screws to timber frame work complete as spfd and directed. |
| 9 | S &F as in repair stainless steel grade 304 modular kitchen trolly plain basket 430x500x200mm all as spfd and directed. |
| 10 | S &F as in repair stainless steel grade 304 modular kitchen trolly plain basket 430x500x150mm all as spfd and directed. |
| 11 | S &F as in repair stainless steel grade 304 modular kitchen sheet cuttlery basket 430x500x100mm all as spfd and directed. |
| 12 | S &F as in repair stainless steel grade 304 modular kitchen trolly plate basket 430x500x150mm all as spfd and directed. |
| 13 | S &F as in repair stainless steel grade 304 modular kitchen thali basket basket 430x500x200mm all as spfd and directed. |
| 14 | S &F as in repair stainless steel grade 304 modular kitchen double pull out basket 430x500x200mm all as spfd and directed. |
| 15 | S&F aluminium profile handle 50x20mm complete all as spfd and directed. |
| 16 | S&F in repair 150mm Extruded brass handles,fabricated type polished completed all as spfd and directed. |
| 17 | S&F in repair 300mm Brass, sliding door bolt with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as spfd and directed. |
| 18 | S&F in repair 150mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts complrtr all as spfd and directed. |
| 19 | S& F 12 mm toughened glass as in Sliding /openabl doors/partition inluding hinges,handles, locking arrangement and similar work including cutting to shape, drilling holes required as spfd and directed. |
| 20 | S & F of 30 mm wide flap when open, mild steel bright finish or electro galvanised continuous (Piano) hinge complete all as specified and directed. |
| 21 | S&F magnets to be used in cabinets as specified and directed. |
| 22 | S&F in repair 24-25mm bore cut to length as required stainless steel draphery rods as required of colour as selected and directed. |
| 23 | S&F in repair 24-25mm bore stainless steel decorative brackets as required of colour as selected and directed. |
| 24 | S & F solid PVC frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet & edges will be printed to match with prelam sheet rein forced with MS square tube etc as spfd and directed. |
| 25 | S&F of 35 mm wide Aluminium powder coated(1/1.2 mtr size) door cills of Any size and descripton all as specified and directed. |
| 26 | S&F factory made solid panel PVC door shutter 30mm (Style) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame as spfd and directed. |
| 27 | S&F 100 mm size Stainless steel butt hinges type B-12 all as specified and directed. |
| 28 | S&F 200mm long aluminium anodised barrel tower bolt and 12 mm dia fixed all as specified and directed |
| 29 | S&F 150 mm long aluminium anodised barrel tower bolt and 12 mm dia fixed all as specified and directed |
| 30 | S&F 150mm long aluminium anodised handle cast type and fixed D Type all as specified and directed |
| 31 | S&F 125mm long aluminium anodised handle cast type anodised all as specified and directed |
| 32 | S&F alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified and directed. |
| 33 | S&F 75 mm long Stainless steel butt hinges with steel hinge pin etc as spfd and directed. |
| 34 | S&F in repair Mortice lock, vertical type, size 100 mm 2 levers aluminium type complete all as specified and directed |
| 35 | S&F in repair Aluminium locking bolts,anodised, with bolt not less than 10mm dia, 100 mm size complete all as specified and directed |
| 36 | S & F in repair Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 150mm long complete all as specified and directed |
| 37 | S & F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as spfd and directed. |
| 38 | S&F framed work such as grills, gratings and holdfasts etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work, conforming to Fe- 290-0 (Gde-E-165) all as specified and directed |
| 39 | S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in a square n exc 0.5 Sq m in each pane (to be fixed upto four storey of bldgs) all as specified and directed |
| 40 | S&F 4mm thick figured glass, pin head/tinted type and glazing with oil putty in a square n exc 0.5 Sq m in each pane (to be fixed upto four storey of bldgs) all as specified and directed |
| 41 | Hacking out old broken glass(any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beadsall as specified and directed |
| 42 | M&L two coat of synthetic enamel paint over new wooden surfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primer including preparation of surfaces complete as spfd and directed. |
| 43 | M&L two coat of syntetic enamel paint over new steel surface of any description over 10cm in width or grith not otherwise described over one coat red oxide primer including preparation of surfaces complete as spfd and directed. |
| 44 | S&F Powder coated aluminium frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws etc complete all as specified. Note : (i) Glazing and wire mesh shall be measured and paid separetely. (ii) Item shall be paid as per weight of aluminium section. (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arrangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing. |
| 45 | M&L for 1 mm thick Birla white putty/JK white wall care putty on walls/Ceiling surfaces all as spfd and directed. |
| 46 | M&L for Preparation of old decorated surfaces of walls and applying one coat of distempering with acrylic distemper as per manufacturer instructions white or tinted complete all as specified and directed. |
| 47 | S&F sheet glass 5mm thick pin headd/froasted and glazing with clips in squaire . exc 0.50 sq m in each pane as spfd and directed. |
| 48 | S&F framed work as in doors or gates of angle or other section with gussest plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering doors etc, to be prepared for hanging and sliding with and including either hooks and hinges or steel hnging door fittings and fixing complete confirming to gde Fe 290 (Gde E-165) all as specified and directed. |
| 49 | M&L for pressed steel door frame size 105 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc. all as specified and directed. |
| 50 | M&L for pressed steel door frame size 125 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc all as spfd and directed. |
| 51 | M&L for providing PCC 1:3:6, type C-0 (using 12.50 mm graded stone aggregate) as in filling of pressed steel door frame and holdfasts including necessary formwork etc all as specified and directed |
| 52 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 53 | M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 54 | Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 55 | M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:6 and to be finished even and smooth with out using extra cement complete all as specified and directed |
| 56 | M&L Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing all as specified and directed |
| 57 | M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing all as specified and directed |
| 58 | S&F in repair Aluminium body ISI marked Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 59 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed |
| 60 | M & L for vitrified ceramic tiles double charge light shed of 7.5 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 complete all as specified and directed. |
| 61 | M & L coloured digital Glazed ceramic coloured tiles in vertical surfaces 300*450 mm 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed. (Note : Work will be carried out as in repair of patches in lieu of existing broken flooring) |
| 62 | M&L at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre tocentre and sealing the same all as specified and directed |
| 63 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified and directed |
| 64 | M & L for anodised aluminium snap grid frame work for false ceiling all as specified and as directed. |
| 65 | S & F of 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system duly suspended with 2 mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof complete all as specified and directed. |
| 66 | M & L for preparation of newly plastered surfaces of walls and applying two coat of distempering over a coat of primer complete all as specified and directed |
| 67 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 68 | M & L brick work using old size fly ash bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed |
| 69 | M&L for rendering 10mm thick in ceiling on brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement all as specified and directed. |
| 70 | M&L for rendering 10mm thick internal surfaces on fair faces of brick work or concrete in cm 1:6 all as specified and directed |
| 71 | M&L for rendering 15mm thick external surfaces on brick/concrete in CM 1:4 finished even and smooth without using extra cement with WPC 2% by wt of cement. Note:-WPC measured and paid separatly all as specified and directed |
| 72 | Supply only liquid water proofing compound ISI marked. |
| 73 | M & L for applying a thin layer of 1.00mm thick Birla white putty/JK white wall care putty on wall surfaces including removal of existing treatment and making the surface uniform and smooth complete all as specified and directed. |
| 74 | M & L for preparation of old decorated surfaces including brooming down or steel wire brushing complete of walls and applying one coat of distempering with acrylic distemper as per manufacturer instruction white or tinted complete all as specified and directed. |
| 75 | M&L for applying two coat of acrylic distemper over a coat of primer incl preparation of new plastered wall surfaces all as specified and directed |
| 76 | M&L for applying one coat of acrylic distemper over a coat of primer incl preparation of new plastered surfaces as in ceiling all as specified and directed |
| 77 | M&L for applying one coat of acrylic distemper over a coat of primer incl preparation of old plastered surfaces as in ceiling all as specified and directed |
| 78 | M&L for two coats cement base paint over a coat of primer including preparation of newly plastered wall surfaces complete all as specified and directed |
| 79 | M&L For Chequered cement concrete tiles 20cm x 20cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with gray pigments cement and pigments all as specified and directed |
| 80 | M&L rubber Moulded pre-cast concrete interlocking paver block any shape and colouring and size conforming to IS 15658-2006 of 80mm thickness M-40 grade with grey cement and no pigments all as specified and directed |
| 81 | M&L Sand filling under floors are in foundation including watering and consolidation. |
| 82 | M & L for 75 mm thick Plain Cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base all as specified and directed |
| 83 | M&L 25 mm thick cement concrete type B-0 (1:2:4) using 12.5 mm graded stone aggregate as in levelling coarse of floor complete all as specified and directed |
| 84 | M&L for granite (any type) work (table rubbed and polished) 18 to 20 mm thick in working platform and like including cutting for sink etc. in cement mortar (1:4) including rounding of edges and pointing in white cement (1:2) using marble dust with admixture of pigment to match.complete all as specified and directed |
| 85 | Dismantling stone slab/ tiles of any description laid dry/laid dry and pointed pointed all as specified and directed |
| 86 | Taking down chowkhats with shutter of size 1.5 sqm & 4 sqm any description or any size & refixing the same after laying tiles all as specified and directed |
| 87 | M & L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 Sqm but not exc. 0.16 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:4 all as specified and directed |
| 88 | M & L for parking tiles light shed of 10 mm thick (square/ rectangular) polished, area of each tiles exc 0..06 sqm and n exc.0.16sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 complete all as specified and directed |
| 89 | M & L for vitrified ceramic tiles double charge dark shed of 7-8 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 sqm and n exc.1.0sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 complete all as specified and directed |
| 90 | M & L Machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:4 complete all as specified and directed (Note : Work will be carried out as in repair of patches in lieu of existing broken flooring) |
| 91 | M & L Kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and incl 10mm thick rendering in cement mortar 1:4 , on fair faces of brick work or concrete surfaces as backing complete all as specified and directed(Note : Work will be carried out as in repair of patches in lieu of existing broken flooring) |
| 92 | M & L for TMT bars 8 mm dia & over cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed |
| 93 | M&L RCC type B-1, 1:2:4 (using 20 mm graded stone aggregate) in slabs, cantilever or supported on walls and small works like cubes etc all as specified and directed |
| 94 | M & L for 35 mm thick precast cement concrete 1:2:4 type B-0 as in louvres and jallies (measured solid), including all mouldings and set in cement mortar 1:4 all as specified and directed . |
| 95 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in walls of 110 mm bore of pipe etc complete all as specified and directed. |
| 96 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75 mm bore of pipe etc complete all as specified and directed |
| 97 | S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed. |
| 98 | S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed. |
| 99 | S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed |
| 100 | PVC (SWR) vent cowl for 110 mm bore pipe all as specified and directed |
| 101 | PVC (SWR) multi floor trap with grating 75 mm dia including jointing with solvent cement all as specified and directed |
| 102 | S & F of 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed |
| 103 | S & F Supplying and laying of CPVC pipes 20 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed. |
| 104 | Supplying and laying of CPVC pipes 25 mm outer dia SDR 11 including fittings on walls/ceiling or laying in floors incl chase cutting complete all as specified |
| 105 | S & F in repair 25mm dia bore CPVC ball valve complete all as specified and directed |
| 106 | S&F 15 mm dia bore bib taps, cast copper alloy chromium plated fancy type with crutch alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed |
| 107 | S&F in repair 15 mm dia bore pillar taps cast copper alloy, with capstan head, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed all as specified and directed |
| 108 | S&F in repair 15 mm dia stop valves/angle valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe all as specified and directed |
| 109 | S&F CP health faucet 15 mm with flexible tube of stainless steel provided rubber hose and wall hook etc complete as in repair all as specified and directed. |
| 110 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed |
| 111 | S&F in repair 15 mm dia two way angle valves/Bib taps, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and directed. |
| 112 | S&F in repair 15 mm dia two way bib taps, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and directed |
| 113 | S &F as in repair chromium plated Shower rose 15 mm size, 125mm long with arms all as specified and directed |
| 114 | S&F vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper including brackets or fixed to walls with anchor fastners all as specified and directed |
| 115 | S & F in Repair of Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete all as specified and directed |
| 116 | S & F of 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets all as specified and directed |
| 117 | S&F in repair rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position all as specified and directed |
| 118 | S&F Tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified and directed. |
| 119 | S&F tubular towel ring 165mm external dia as specified and directed. |
| 120 | M&L two coat of synthetic enamel paint over old/new wooden surfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primer including preparation of surfaces complete all as specified and directed. |
| 121 | Taking down re-fixing Shutters of any description but exc 2 sq. m each in same opening including easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. Renewal of builder's hardware articles, if specially ordered, shall be paid for at 'supplied only' rates all as specified and directed |
| 122 | S &F as in repair jaguar chromium plated maze over head shower 300x300mm square shape single flow(body & face plate stainless) with rubit cleaning system including shower arm cat part no OHS-1639 or equivalent complete all as specified and directed. |
| 123 | M&L cement concrete type E-2 1:5:10(40mm graded aggregate) lean concrete as in sunkun floor for filling etc,complete all as spfd and as directed. |
| 124 | M&L for 40mm thick cement concrete type B-1 1:2:4(20mm graded aggregate) as in sunkun floor complrtr all as spfd and as directed. |
| 125 | M&L for 15mm thick plastering 1:3 along the wall of toilet and bath mixed with 3% WPC and finished even and smooth without using extra cement complete all as spfd and as directed. |
| 126 | M&L bitumen blown any grade applied hot,two coat to concrete surface @ of 1.5kg pper coat complete all as spfd and directed. |
| 127 | M&L Polythene film black 50micron laid in floor complete all as spfd and as directed. |
| 128 | S&F vanity set of size 625mm(D)x47mm(W)x54mm(H) including WHB,mirror and shelf and cabinet with storage space complete all as spfd and directed. |
| 129 | S&F CP Wall Mixer (three in one) 15mm bore for bathroom all as specified and directed . Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed at site. Please Enable Macros to View BoQ information |
