|
| 1 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 2 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 3 | M&L fly ash Brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed. |
| 4 | M&L fly ash Brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:6) complete all as specified and directed. |
| 5 | M & L for 18- 20 mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed. |
| 6 | M&L for Marble work (makrana marble) 18 to 20mm thick(table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed. |
| 7 | Dismantling Stone slabs and tiles of any description or thickness in floors & pointed in any Mortar all as specified and directed. |
| 8 | M & L for vitrified ceramic tiles double charge light shed of 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 sqm but n.exc 1.0 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 complete all as specified and directed. |
| 9 | Taking down cement plaster any description on brick or stone walls etc including Removing of tree/plant girth not exc 15 cm from wall/roofing including removing all roots ,raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 10 | M &L Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth (without using extra cement) using water proofing compound.complete all as specified and directed. |
| 11 | M & L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth (without using extra cement). |
| 12 | M&L for rendering 10 mm thick in ceiling on brick work or concrete surfaces in CM 1:4, finished even and fair complete all as specified and directed. |
| 13 | M&L 40 mm thick cement concrete type B-0 (1:2:4) using 12.5 mm graded stone aggregate as in levelling coarse of roof/floor complete. |
| 14 | M &L Glazed ceramic coloured tiles in vertical surface 450X 350 (7-8mm) thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 on fair face of brick work or concrete surfaces as backing for tiles complete all as specified and directed. |
| 15 | M & L coloured Non Skid ceramic coloured jointless tiles (square/rectangular) area of each tile exc 0.18 Sqm but not exc. 0.38 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:6. complete all as specified and directed. |
| 16 | M&L for Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed. |
| 17 | M&L for preparation of new plastered surfaces of wall and Priming with alkaliresistant paint and applying two coat of distempering with acrylic distemper as per manufacturer instructions white or tinted complete all as specified and directed. |
| 18 | M&L for 1 mm thick of Birla white putty/JK white wall care putty on new plastered surfaces and making the surface uniform & smooth complete all as specified and directed. |
| 19 | M&L for complete removal of existing treatment of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including washing down with water etc. applying two coats of oil bound distemper with roller over one coat of primer, complete all as specified and directed. |
| 20 | M&L for Preparation of old decorated surfaces of ceiling and applying one coat of distempering with acrylic distemper as per manufacturer instructions white or tinted complete all as specified and directed. |
| 21 | M&L for Preparation of new decorated surfaces of ceiling and applying one coat of distempering with acrylic distemper as per manufacturer instructions white or tinted complete all as specified and directed. |
| 22 | M&L for complete removal of existing treatment of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including washing down water etc. applying two coats of antifungal exterior paint (of shade/colour as directed by GE) over one coat of primer all as per manufacturerinstruction including necessary scaffoldings etc. complete all as specified and directed.Note:Application of new/old finishes to be carried out by authorised applicator. |
| 23 | S&F Powder coated aluminium partition, frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws etc complete all as specified. Note : (i) Glazing and wire mesh shall be measured and paid separetely only as the labour element included in the relavent item.(ii) Item shall be paid as per weight of aluminium section (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing. |
| 24 | S &F Floor door stopper (150 mm) of brass body and tongue with hard drawn steel spring complete all as specified and directed. |
| 25 | S&F 4mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqm each pane complete all as specified and directed. |
| 26 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or fixing rubber gasket with aluminium frame in each pane |
| 27 | S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as spfd and directed. |
| 28 | Supplying and laying of CPVC pipes 25 mm outer dia SDR 11 including fittings on walls/ceiling or laying in floors incl chase cutting complete all as specified |
| 29 | S & F Supplying and laying of CPVC pipes 20 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed by Engr-in-charge. |
| 30 | S & F of Male & Female Brass Threaded Adaptor (MFTA & MTA/ MBTA & MFBTA) complete all as specified and directed. |
| 31 | S&F of 25mm dia tank union cpvc complete all as spfd and directed. |
| 32 | S&F of 20mm dia brass elbow complete all as spfd and directed. |
| 33 | S&F of 20mm dia brass Tee complete all as spfd and directed. |
| 34 | S&F CPVC Gate Valve/tank union/Float valve fixed in pipe all as Specified and directed. |
| 35 | M&L Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed 200mm long |
| 36 | M&L Extruded brass handles, fabricated type polished 150mm long all as spfd . |
| 37 | S&F 125 mm long Stainless steel butt hinges with steel hinge pin etc. |
| 38 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipe etc complete all as specified and directed. |
| 39 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 75 mm bore of pipe etc complete all as specified and directed. |
| 40 | S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed. |
| 41 | S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed. |
| 42 | S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed |
| 43 | S&F PVC (SWR) vent cowl for 110 mm bore pipe |
| 44 | S&F PVC (SWR) multi floor trap with grating 75 mm dia including jointing with solvent cement |
| 45 | S&F in repair rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position including Dismantling water tanks and removing to store all as specified and directed |
| 46 | S & F of 6mm thick bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 47 | S&F 15 mm dia stop valves/angle valves/ cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe.. |
| 48 | S&F Towel Rail 600 mm long Stainless steel all as spfd and directed |
| 49 | S&F Towel Ring round Stainless steel All as spfd and directed |
| 50 | S&F brass chromium plated Two way bib cock with wall flange all as spfd and directed |
| 51 | S&F counter top wash basin white size 600x400x185 mm including Bottle Traps, chain & plug and porcelain stopper brackets or fixed s all as specified and directed |
| 52 | Supply & fix chromium plated exposed part kit of single lever basin mixer wall mounted consisting of operating lever,cartidge sleeve,wall flange,Nipple&spout(compatible with ALD-233N or ALD-235N) for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed |
| 53 | S&F CP health faucet 15 mm with 8mm dia and 1.0 m long flexible tube and wall hook with NRV( back flow preventer) etc complete as specified. |
| 54 | S & F rimless bowl with cistern for coupled WC with UF soft close seat cover,hinge,dual flush cistern fitting with back filling , fixing accessories size 385x680x785mm,s trap-220mm (with conversion bend- ZPS -WHT-VB01) all as specified and directed |
| 55 | S&F vitreous china full stall type urinal size 385x325x635mm with all fixing accessories complete all as spfd and directed. |
| 56 | S&F rectangular shaped urinal partion with frostrd glass 10mm thick chrome finish size 900x450mm. |
| 57 | S&F CP toilet paper holder with flap all as specified and directed |
| 58 | S& F soap dish holder incl all fitting complete all as spfd and directed. |
| 59 | S& F soap dispenser with glass bottle incl all fitting complete all as spfd and directed. |
| 60 | S & F Bib taps 15 mm, chromium plated and fancy type long body cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. |
| 61 | S&F brass chromium plated Shelf glass/Corner self assembly with CP screws etc complete all as spd and directed. |
| 62 | S&F PVC connections 15mm size with PTMT nuts of length 450/600 mm all as specified and as directed. |
| 63 | M &L for Surface Preperation - Removal of all loose particles, dust,dirt,oil , grease,algae and fungus use wire mesh . Clean the surface and allow it to dry completely indetify and mark all visible cracks . Fill hairline cracks with smartC are crackseal . for wider cracks , use polymer modified mortar allow sufficient curing time as per product guidelines. Supply and application of smartcare PU infinia in three coats, with a minimum coverage of 1.8 kg / sqm, incorporating a fleece layer sandwiched between the first and second coats. the application is to be carried out over a surface primed with smartcare PU infinia primer , applied at a minimum coverage of 0.2 kg/sqm . The membrane exhibits the following properties elongation with fleece : 80% elongation without fleece : 400% crack bridging capability : upto 6.5 mm pull off strength : 1.5 mpa puncture resistance : greater than 200 N |
| 64 | M & L for Formation of coving using cement mortar (1:3) or approved material . Coving shall be semicircular or triangular in shape with a redius /height of 75 mm . Ensure proper bonding with the terrace surface and adjoining walls to ensure durability. |
| 65 | M & L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded aggregate as in plinth protection and finishing surfaces even and smooth without using extra cement. |
| 66 | Taking down chowkhats for frames exc 1.5 Sqm but not exc 4.00 Sqm. |
| 67 | Taking down chowkat or frame with shutter (without taking off shutters from the frames) area not exceeding 1.5 Sq mtr each |
| 68 | S & F solid PVC frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet used & edges will be painted to match with printed sheet suppling & fixing in opening as per specification & drawing |
| 69 | S&F Factory Made Solid PVC Moulded Door Shutter with Particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Prelam PVC Sheet on back face ,supplying & fixing in frame at site as per specification & drawing |
| 70 | S& F 12 mm toughened glass as in Sliding /openabl doors/partition inluding hinges,handles, locking arrangement and similar work including cutting to shape, drilling holes required as directed |
| 71 | M&L for 35mm thick second class hardwood glazed and skelton door shutters open rebated and prepared to receive glass / gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc without sash bars size of members of shutter as specified in SSR Part-I section 8, clause 8.24 (a) complete all as specified and directed. |
| 72 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proofS.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremeshshall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but noextra payment on this account shall be made. |
| 73 | M & L RCC type B-1 1:2:4 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns, and in shelves including form work and the like complete. |
| 74 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series)frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.)comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles dulyreinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process ofnrequired length (shape & size according to uPVCprofile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers,plastic caps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion weldedat all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing &direction of Engineer-in-Charge. (Glass shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as spfd and directed. |
| 75 | M & L for TMT bars 8 mm dia & over cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 76 | S&F stainless steel draphery rod 25-28mm dia fancy type with brackets,decorative end caps coloured to match complete all as specified & directed by Engr-in -Charge. |
| 77 | M&L for voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as spfd and directed. |
| 78 | M&L for ATT Along the external wall below concrete or masonry apron using chemical emulsion@ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as spfd and directed. |
| 79 | M&L at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre tocentre and sealing the same complete all as specified and directed. |
| 80 | Taking down copper /aluminium point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site. |
| 81 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch/Busbar including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 82 | Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 83 | Taking down ceiling fan/ exhaust fan/wall fan/ speaker/ jhumar/ ac/ energy meter after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M complete with tranportation from site to mes yard e/m all as specified and as directed. NOTE:- any losses or damage of items during taking down should be recovered from quoter. |
| 84 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :- |
| 85 | (a) One light point controlled by one, one way switch 5 Amps |
| 86 | (b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 87 | (c) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 88 | (d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 89 | Description all as per item No 84 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 90 | Description all as per item No. 84 here in before but using 4.0 sq mm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 4.0 sq mm PVC insulated copper conductor FRLS cable as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC Point) |
| 91 | S & F modular switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified. |
| 92 | S & F modular switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified. |
| 93 | S & F modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 94 | S & F modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 95 | S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and directed |
| 96 | S & F modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 97 | S & F modular ac starter of rated 25 amp suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 98 | S & F rope/strip light led of white in colours small led linked together and encased in a pvc jacket to create a string of light ip 65 protected suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 99 | S & F S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 100 | S & F fancy focus light glare free on stand track mounted aimable downlight in vertical orientation made of pressure die cast alumunium powder coated black/white houseng is rotable and tilting with 120lm/w. suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 101 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 10 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 10.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 10 sqmm cable,one run of 10 sqmm cable and one run of PVC conduit will be measured as one unit |
| 102 | S & F for sheet metal enclosure MCB DB TPN 8 way Vertical type with 200 Amps suitable for MCCB 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 103 | Supply and fix 4 Pole MCCB 200 Amp, 50 Hz, 415 V with rupturing capacity 36 KA complete all as specified and as directed. |
| 104 | S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 105 | S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 106 | S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 107 | Re-fixing of ceiling fans complete with blades, down rods, electronic regulator and accessories complete all as specified and as directed. |
| 108 | Re-fixing of xhaust fan of 250 mm sweep made of plastic/steel body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed. |
| 109 | Re-fixing of electronic meter and accessories complete all as specified and as directed. |
| 110 | Re-fixing of jhumar light and accessories complete all as specified and as directed. |
| 111 | Re-fixing of wall mounted fans and accessories complete all as specified and as directed. |
| 112 | Re-fixing of wall mounted speaker and accessories complete all as specified and as directed. |
| 113 | Re-fixing of split unit ac of both outdooer as well indoor unit and accessories complete all as specified and as directed. |
| 114 | S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. . |
| 115 | Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 116 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed |
| 117 | M & L for earthing complete with galvanized earth plate electrode 600mmx 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level connected to galvenised earth lead wire of 4 mm dia by means of nuts, bolts, washes of galvanized iron or steel all as shown in electrical plate No 5 and testing on completion including adequate charcoal dust comman salt necessary excavation & earth work PCC(1:3:6) type C-1 pit with precast RCC Cover slab 40 mm thick in PCC(1:2:4) type B-1 reinforced with 6 mm dia MS bars @ 100 mm c/c both ways with funnel wire mesh and 20 mm dia GI pipe medium grade as watering pipe and connected to earthing point complete all as specified and as directed. |
| 118 | Dilto item No 117, but using galvanised iron strip 25×4mm as earthing lead |
| 119 | Supply and laying & testing and commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of size complete all as specified and directed and including taking down existing cable any type. |
| 120 | (a) 3.5 core x 95 Sqmm |
| 121 | (b) 3.5 core x 50 Sqmm |
| 122 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth for laying of pipe, cable, foundation of electric pole etc and getting out in soft/loose soil, complete all as specified & Diected by engineer in charge. |
| 123 | Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed at site. |
| 124 | Returning, filling in including spreading leveling watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed. |
| 125 | Removing surplus soil to a distance not exc. 50 M and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed. |
| 126 | Supply and laying for brick of common burnt clay, sub class 'B' old size laid flat and dry on cables as in cable protection in trenches over cables perpendicular to direction of cables abutting each other complete all as specified and directed. note :-all measurement in meter |
| 127 | Supply,laying galvanised steel tubing light grade complete with all fitting of size 50 mm dia for cable protection along with pole across road etc. Complete all as specified and directed Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed at site. Please Enable Macros to View BoQ information |
