Tender For Comprehensive Annual Maintenance Contract For Office Building And Residential Building Of Cmpdi Ri-Ii For Two Years., Dhanbad-Jharkhand

TDR : 55578926

Tender Notice
BOQ

10 Days Left

Dhanbad , Jharkhand

Tender Brief : Tender For Comprehensive Annual Maintenance Contract For Office Building And Residential Building Of Cmpdi Ri-Ii For Two Years.

Document Fees
Refer document

EMD
₹ 268300.0 /-

Tender Value
₹ 2.14 Crore /-

Submission Date
04-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	ELECTRICAL WORKS
2	CIVIL WORKS INCLUDING REPAIR & MAINTENANCE,UPKEEPING AND HORTICULTURE
3	Electrical Work
4	Providing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel,making connections, etc as required 630 A,50KA,FPMCCB.
5	Providing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel,making connections, etc as required. 200 A,16KA,TPMCCB.
6	Supply of S.P. 5/6 amps, one way switch, piano type ISI marked
7	Supply of S.P. 15/16 amps, one way switch, piano type ISI marked
8	Supply of 3 pin 5/6 amps socket outlet, piano type ISI marked
9	Supply of 6 pin 15/16 & 5/6 amps socket outlet, piano type ISI marked
10	Supply of S.P. 5/6 amps, one way modular switch, ISI marked
11	Supply of S.P. 15/16 amps, one way modular switch, ISI marked
12	Supply of 3 pin 5/6 amps modular socket outlet, ISI marked
13	Supply of 6 pin 15/16 amps modular socket outlet, ISI marked
14	Supply of Stepped type Modular Fan regulator (2 module)
15	Supply of Call bell/ buzzer, single phase
16	Angle/Batten Holder
17	3 mm thick phenolic Laminated Sheet
18	Bell push, piano type
19	Brass Pendent Holder
20	Supply of Aluminium lugs for 25 sq. mm cable
21	Supply of Aluminium lugs for 35 sq. mm cable
22	Supply of Aluminium lugs for 70 sq. mm cable
23	Supply of Modular base & cover plate for 3 module
24	Supply of Modular base & cover plate for 4 module
25	Supply of Modular base & cover plate for 6 module
26	Supply of Modular base & cover plate for 8 module
27	Supply of Modular base & cover plate for 12 module
28	Supply of 6 amps. to 32 amps. ratings , SP MCB, “C” curve, 10 KA breaking capacity
29	Supply of 6 amps. to 32 amps. ratings , DP MCB, “C” curve,10 KA breaking capacity
30	Supply of 1.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable
31	Supply of 2.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable
32	Supply of 4.0 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable
33	Supply of 6.0 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable
34	Supply of 10.0 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable
35	Supply of 16.0 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable
36	Supply of 16/0.20 mm (0.5 sqmm) twin core circular FRLS PVC sheathed, flexible copper cable
37	Supply of LED Batten light (System lumen efficacy ≥120 <135 lm/Watt) 18 to 22 watt
38	Supply of LED Batten light (System lumen efficacy ≥120 <135 lm/Watt) 24 to 26 watt
39	Supply of LED Panel light 2x2 ft. (System lumen efficacy ≥120 <135 lm/Watt)Powder coated die cast / Extruded aluminium Body (Thickness >1.20 mm)36 watt
40	Supply of LED Down lighter (SMD Type) (System lumen efficacy ≥120 <135 lm/Watt ) 12 -15 watt
41	Supply of LED Down lighter (SMD Type) (System lumen efficacy ≥120 <135 lm/Watt ) 20-22 watt
42	Supply of LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥120 <135 lm/Watt) 25 watt
43	Supply of LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥120 <135 lm/Watt)50 watt
44	Supply of LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy >135 lm/Watt) 100 watt
45	Supply of PVC 2 Pole MCB Box Good Quality
46	Supply of 16 amp. Top Make - Anchor,Havells or equivalent.
47	Supply of 2 way (5/6 Amp)pvc gang box 210 mmx 210 mm x 50 mm Good Quality
48	Supply of 4 way gang box 100 mm x75 mmx 50 mm Good Quality
49	Supply of 15/16 amp combined switch and socket flush type Make - Anchor,Havells or equivalent.
50	Supply of 15/16 amp combined switch and socket flush type with Box Make - Anchor,Havells or equivalent.
51	Supply of Capacitor/condenser: 2.5 mfd (HPL, Havells, Anchor Bajaj or equivalent.)
52	Supply of PVC tape (10 mtr roll) Make - Anchor,Havells or equivalent.
53	Supply of Cable clip/clamp 4 mm (25 nos. each packet) Good Quality
54	Supply ofCable clip/clamp 10 mm (50 nos.each packet) Good Quality
55	Supply of Cable clip/clamp 20 mm (50 nos. each packet) Good Quality
56	Supply of Pipe clamp 1\\" (per piece.) Good Quality
57	Supply of Pipe clamp 1.5\\" (per piece.) Good Quality
58	Supply of Extension board (with 3 nos .piano socket of 5/15 A and 01 no. Switch 1.5 mtr cord Length Make - Anchor,Havells or equivalent.
59	Supply 40A rating 240/415V ,10 kA \\"C\\"- curve double pole miniature circuit breaker. Make - Anchor,Havells or equivalent.
60	Supply 63A rating 240/415V ,10 kA \\"C\\"- curve double pole miniature circuit breaker.Make - Anchor,Havells or equivalent.
61	Supply 63 A rating 240/415V ,10 kA \\"C\\"- curve four pole miniature circuit breaker.Make - Anchor,Havells or equivalent.
62	Supply of 1 sq.mm of FRLS PVC insulated copper conductor single core cable,Make-Havells,Mescab,Anchor etc.
63	Supply of 4 core 25 Sq.mm PVC insulated and PVC sheathed / XLPE Aluminium armoured cable of 1.1 KV grade of following size ,Make: Mescab,Havells etc as required.
64	Supply of 12 W LED bulb: (make Philips, Havells, Syska or equivalent etc.)
65	Supply of 20-22 W LED bulb: (make Philips, Havells, Syska or equivalent etc.)
66	Supply of LED Tube Light Retrofit Type Length 4 feet apprx 20-22 watt in existing fitting (make Philips, Havells, Syska or equivalent etc.)
67	Supply of Power Contactor, 3 POLE POWER CONTACTOR Range-(120 to 150) AMP WITH 2NO+2NC, Vertical Mounted Make -L&T, Havells or equivalent.
68	Supply of Aluminum die-casting Led post top lantern, IP 65, Power 30-40 Watt in Existing Pole (make Philips, Havells, Syska or equivalent etc.)
69	Supply of GI Metal Board 210mm x 210 mm x 50 mm. Good Quality
70	Supply of GI Metal Board 75 mm x 75 mm x 50 mm Good Quality
71	Supply of GI Metal Board 230 mm x 80 mm x 50 mm Good Quality
72	Supply of 60 to 70 watt LED Driver for street light in Existing Street Light
73	Supply of 6 Amp. Top Make - Anchor or equivalent.
74	Supply of PVC Board (8 inch X 6 inch ) with standard depth. Good Quality
75	Supply ofPVC Board (8 inch X 10 inch) with standard depth. Good Quality
76	Supply of PVC Board (6 inch X 4 inch) with standard depth. Good Quality
77	Supply of PVC Board (8 inch X 12 inch) with standard depth.Good Quality
78	Rewinding of ceiling fan motor (1200mm) with copper wire including of materials required.
79	Supply and fixing of ball bearings for ceiling fan ( 02 nos for each fan)
80	Supply and fixing of shaft for ceiling fan
81	Supply and fixing of starter with winding wall mounted fan
82	Supply and fixing of shaft for wall mounted fan
83	Supply and fixing of bush for wall mounted fan ( 02 nos for each fan)
84	Supply and fixing of gear Box for wall mounted fan
85	Supply and fixing of capacitor for wall mounted fan
86	Supply and fixing of blade (03 nos. set) for wall mounted fan
87	Supply and fixing of controller switch for wall mounted fan
88	Providing unskilled labour for cleaning of solar panels at site. The work includes manual cleaning of panel surfaces using water, cloth, or suitable tools to remove dust and dirt, ensuring proper efficiency of panels, complete as per the instructions of the Engineer-in-Charge.
89	Supply of S.P. 5/6 amps, one way switch, piano type ISI marked
90	Supply of S.P. 15/16 amps, one way switch, piano type ISI marked
91	Supply of 3 pin 5/6 amps socket outlet, piano type ISI marked
92	Supply of 6 pin 15/16 & 5/6 amps socket outlet, piano type ISI marked
93	Supply of Call bell/ buzzer, single phase
94	Supply of Angle/Batten Holder
95	Supply of 3 mm thick phenolic Laminated Sheet
96	Supply of Bell push, piano type
97	Supply of Brass Pendent Holder
98	Supply of 6 amps. to 32 amps. ratings , SP MCB, “C” curve, 10 KA breaking capacity
99	Supply of 6 amps. to 32 amps. ratings , DP MCB, “C” curve,10 KA breaking capacity
100	Supply of 1.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable
101	Supply of 2.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable
102	Supply of 4.0 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable
103	Supply of 6.0 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable
104	Supply of 10.0 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable
105	Supply of 16.0 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable
106	Supply of 16/0.20 mm (0.5 sqmm) twin core circular FRLS PVC sheathed, flexible copper cable
107	Supply of LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥120 <135 lm/Watt) 50 watt
108	Supply of LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy >135 lm/Watt) 100 watt
109	Supply of Fan regulator flush type/Step type Make - Anchor,Havells or equivalent.
110	Supply of PVC 2 Pole MCB Box Good Quality
111	Supply of 15/16 amp combined switch and socket flush type Make - Anchor,Havells or equivalent.
112	Supply of 15/16 amp combined switch and socket board flush type with Box Make - Anchor,Havells or equivalent.
113	Supply of Capacitor/condenser: 2.5 mfd (HPL, Havells, Anchor Bajaj or equivalent.)
114	Supply of PVC tape (10 mtr roll) Make - Anchor,Havells or equivalent.
115	Supply of Cable clip/clamp 4 mm (25 nos. each packet) Good Quality
116	Supply of Cable clip/clamp 10 mm (50 nos.each packet) Good Quality
117	Supply of Cable clip/clamp 20 mm (50 nos. each packet) Good Quality
118	Supply of Pipe clamp 1\\" (per piece.) Good Quality
119	Supply of Pipe clamp 1.5\\" (per piece.) Good Quality
120	Supply 40A rating 240/415V ,10 kA \\"C\\"- curve double pole miniature circuit breaker. Make - Anchor,Havells or equivalent.
121	Supply 63A rating 240/415V ,10 kA \\"C\\"- curve double pole miniature circuit breaker.Make - Anchor,Havells or equivalent.
122	Supply of 1 sq.mm of FRLS PVC insulated copper conductor single core cable,Make-Havells,Mescab,Anchor etc.
123	Supply of 2 core 25 Sq.mm PVC insulated and PVC sheathed / XLPE Aluminium armoured cable of 1.1 KV grade of following size ,Make: Mescab,Havells etc as required.
124	Supply of GI Metal Board 210mm x 210 mm x 50 mm. Good Quality
125	Supply of GI Metal Board 75 mm x 75 mm x 50 mm Good Quality
126	Supply of GI Metal Board 230 mm x 80 mm x 50 mm Good Quality
127	Supply of 60 to 70 watt LED Driver for street light in Existing Street Light
128	Supply of PVC casing 2 mtr long 3/4\\" Good Quality
129	Supply of Flat battern cable clip (100 nos.) Good Quality
130	Supply of Pipe bend 1.5\\" for street light Good Quality
131	Supply of PVC Plastic Fastner 1 inch long (100 nos.) Good Quality
132	Supply of PVC Board (8 inch X 6 inch ) with standard depth. Good Quality
133	Supply of PVC Board (8 inch X 10 inch) with standard depth. Good Quality
134	Supply of PVC Board (6 inch X 4 inch) with standard depth. Good Quality
135	Supply of PVC Board (8 inch X 12 inch) with standard depth.Good Quality
136	Rewinding of ceiling fan motor (1200mm) with copper wire including of materials required.
137	Supply and fixing of ball bearings for ceiling fan ( 02 nos for each fan)
138	Supply and fixing of shaft for ceiling fan
139	Wiring for circuit /submain wiring along with earth wire with the following size of FR PVC insulated copper conductor ,single core cable in surface/recessed medium class PVC conduit as required 2x6 sq.mm + 1x6 sq.mm earth wire
140	Wiring for circuit /submain wiring along with earth wire with the following size of FR PVC insulated copper conductor ,single core cable in surface/recessed medium class PVC conduit as required. 2x10 sq. mm+1x6 sq. mm earth wire.
141	Wiring for circuit /submain wiring along with earth wire with the following size of FR PVC insulated copper conductor ,single core cable in surface/recessed medium class PVC conduit as required.2x16 sq. mm+1x6 sq. mm earth wire
142	Wiring for circuit /submain wiring along with earth wire with the following size of FR PVC insulated copper conductor ,single core cable in surface/recessed medium class PVC conduit as required. 2x2.5 sq. mm+1x2.5 sq. mm earth wire.
143	Supplying and fixing following way,single pole and neutral,sheet steel,MCB distribution board,240 volts,on surface/recessed,complete with tinned copper bus bar,neutral bus bar,earth bar,din bar, interconnections, powder painted including earthing etc.as required.(But without MCB/RCCB/Isoltor) .6 way, Double door.
144	Supplying and fixing following way,single pole and neutral,sheet steel,MCB distribution board,240 volts,on surface/recessed,complete with tinned copper bus bar,neutral bus bar,earth bar,din bar, interconnections, powder painted including earthing etc.as required.(But without MCB/RCCB/Isoltor) 8 way, Double door.
145	Supplying and fixing following way,single pole and neutral,sheet steel,MCB distribution board,240 volts,on surface/recessed,complete with tinned copper bus bar,neutral bus bar,earth bar,din bar, interconnections, powder painted including earthing etc.as required.(But without MCB/RCCB/Isoltor) 12 way, Double door.
146	Supplying and fixing 5 amps to 32 amps rating,240/415 volts,\\"c\\", miniature circuit breaker suitable for inductive load of following poles of existing MCB DB complete with connections,testing and commining etc.as required Double Pole, 32 Amp.
147	Supplying and fixing 5 amps to 32 amps rating,240/415 volts,\\"c\\", miniature circuit breaker suitable for inductive load of following poles of existing MCB DB complete with connections,testing and commining etc.as required Single Pole, 20 Amp
148	Supplying and fixing 5 amps to 32 amps rating,240/415 volts,\\"c\\", miniature circuit breaker suitable for inductive load of following poles of existing MCB DB complete with connections,testing and commining etc.as required Single Pole, 10 Amp.
149	Supplying and fixing 5 amps to 32 amps rating,240/415 volts,\\"c\\", miniature circuit breaker suitable for inductive load of following poles of existing MCB DB complete with connections,testing and commining etc.as required.Single Pole, 16 Amp.
150	Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit ,with piano type switch,phenolic laminated sheet ,suitable size M.S. box and earthing the point with 1.5 sq. mm FR PVC insulated copper conductor single core cable etc as required GROUP - A
151	Supply and fixing following piano type switch/soccket on the existing switch box/cover including connections etc as required. 5/6 Amps switch.
152	Supply and fixing following piano type switch/soccket on the existing switch box/cover including connections etc as required. 3 pin 5/6 Amp socket outlet.
153	Supplying and fixing DP sheet steel enclosure on surface/recess along with 25/32 amps 240 volts \\"c\\" curve DP MCB complete with connections,testing and commissioning etc.as required.
154	Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/wooden block including connection etc as required.
155	Supplying and fixing call bell/buzzer suitable for single phase, 230 volts, complete as required.required.
156	20 mm junction box,one way/two way
157	Supplying and fixing PVC batten/ angle holder including connection etc.as required.
158	wiring for circuit /submain wiring along with earth wire with the following size of FR PVC insulated copper conductor ,single core cable in surface/recessed medium class PVC conduit as required.. 2x4 sq. mm+1x4 sq. mm earth wire
159	Supply and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection,painting etc. as required.
160	Supply and fixing metal box of 150 mm X 75 mm X 60 mm deep(nominal Size of phenilic laminated sheet cover in front including providing and fixing 3 pin 5 / 6 amps socketoutlet and 5 / 6 Amps piano type switch, connection, painting etc. as required.
161	Earthing with G.I. earth plate 600 mm x600 mm x 6 mm thick including accessories and providing masonry encloused with cover plate havinglocking arrengement and watering pipe of 2.7 metre long etc.with charcoal/coke and salt as required.
162	Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing required.
163	Providing and Fixing of following rating and braking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle including drilling holes in cubical panel,making connections,etc as require. 100A,16KA,TPMCCB
164	Supply of 2+4 way ,SPN,Single door,MCB DB
165	Supply and fixing stepped type electronic fan regulator on the existing sheet including connections etc.as required.(Anchor,Havells or equivalent)
166	Providing and Fixing 63A,16KA,DP MCB in existing cubical pannel including ,making connections, etc as required.(Anchor,Havells,Legrand or equivalent)
167	Providing skilled manpower for day-to-day electrical maintenance at site. The work includes operation, inspection, preventive maintenance, and breakdown repair of electrical systems. All work shall be carried out as per the instructions of the Engineer-in-Charge.
168	Providing semiskilled manpower (Electrical Helper) for day-to-day electrical maintenance work at site. The work includes assisting in operation, inspection, preventive maintenance, and attending breakdown repairs of electrical systems. All work shall be carried out as per the instructions of the Engineer-in-Charge.
169	CIVIL WORKS INCLUDING REPAIR & MAINTENANCE,UPKEEPING AND HORTICULTURE
170	General Cleaning (Sweeping, Mopping, dusting) of Cabin/Work Stations area/Conference halls including cleaning and wiping of aluminium and glass partition, desk, chairs, furnitures electronic device, etc and cleaning of cobweb/ jhul at all floors ceiling of CMPDI RI-2 office building as per Direction of EIC (Estimated floor area= 2990 m2). Tools and tackles, contractor profit, etc in complete all respect. (Mandays Required per operation: 3.397)
171	General Cleaning (Sweeping, Mopping, dusting) of Common area/Lobby / other area including cleaning of cobweb/ jhul at ceiling at CMPDI RI-2 office Building as per Direction of EIC (Estimated area= 676.4 m2). Tools and tackles, contractor profit, etc in complete all respect. (Mandays Required per operation : 0.76)
172	General Cleaning (Sweeping, Mopping, dusting) of Staircase/Lifts of CMPDI RI-2 office Building by plain water and cleaning agent as per Direction of EIC (Estimated area= 233.22 m2). Tools and tackles, contractor profit, etc in complete all respect. (frequency-Daily) (Mandays required per operation: 0.36)
173	Deep Cleaning of Restrooms/Washrooms including cleaning & washing of WC pan PVC Cistern, comode, urinal pan, squating pan, wash basin of CMPDI RI-II Office Building as per direction of EIC (Estimated area= 258.90 m2). Tools and tackles, contractor profit etc in complete all respect. (Mandays required per operation :0.8)
174	General Cleaning of terrace (office building top and second floor terrace) as per direction of EIC (Estimated area= 859.89 m2). Tools and tackles, contractor profit etc in complete all respect. (Mandays per operation: 0.99)
175	General Cleaning and brooming of Road/ facade,etc surrounding office bulding as per direction of EIC (Estimated area= 1021.73 m2). Tools and tackles, contractor profit, etc in complete all respect.(Mandays Required per operation: 0.79)
176	Mandays for Shifting of Table, Chair, Almirah, Cabinet,etc and other miscellaneous activity within the scope as per instruction of EIC. Tools and tackles, contractor profit, etc in complete all respect.
177	Cleaning of Overhead Water Tank (Estimated Surface Area: 62.54m2) of CMPDI RI-2 office building as per direction of EIC. Tools and tackles, contractor profit, etc in complete all respect. (Mandays Per operation: 6)
178	Cleaning of Underground Water Tank (Estimated Surface area: 27m2) of CMPDI RI-2 office building as per direction of EIC. Tools and tackles, contractor profit, etc in complete all respect. (Mandays Per operation: 3)
179	Deep Cleaning of the base of Central duct and Auxiliary duct and its chamber including chaukage / blockage of sewer lines series mouth inside an inspection pit or chamber located in northern portion at ground floor with intermediate manhole beneath eastern portico of our building to trunk line of Koyla Bhawan campus as per instruction of EIC. Tools and tackles, contractor profit, etc in complete all respect. (Mandays per operation: 8)
180	Supply of Consumables like Coconut stick Jharu/Broom,Long handle coconut stick jharu/ broom, Phool Jharu, Mopping brush, Plastic wiper, Napthalene ball, Hand wash ,Toilet cleaning brush, cotton soft cloth duster, Plastic bucket, toilet cleaner, fragnant phenol, bleaching powder, detergent powder, muratic acid, glass cleaning agent, air freshner pocket, room freshner spray, tile cleaner liquid, urinal mat, soap dispenser, bathroom scubber, dust plate as per direction of engineer in-charge.
181	Maintenance of pre-developed lawns and flower beds, shrub, hedges of various areas inside CMPDI campus through careful tending by applying good horticulture practices like planting, cutting, mowing, weeding, watering, replacing damaged grass including all necessary tools and tackles as per , labour as per approved superior standard of expertise so that during the contract period of any time the lawn should look healthy, well-kept, well-groomed, cleaned, fresh and pleasing to the eye as per scope of the work. (Mandays required per operation:1 )
182	Maintenance of potted plants both indoor and outdoor is to be done by planting, cleaning, mopping of the pots and leaves of the plants, watering, pruning, hoeing, weeding of unwanted growth changing of soil when required including exchanging of flower pots between indoor and outdoor as per direction of EIC. Placing of indoor plants during VIP visit at , Conference Hall, Guest House and other associated buildings at CMPDI RI-II. (No. of pots: 250)
183	Providing Green Carpet Grass in garden of CMPDI RI-II as per direction of EIC.
184	Providing seasonal/perennial plants/trees sapling like Marigold(hybrid),Petunia, Pansy, Verbena, Zinna, Cosmos,Gaillardia,Beli, Juhi, Raatrani ,Hedge plant, etc of minimum height of 10cm in garden of CMPDI RI-II as per direction of EIC.
185	Providing plants like Areca Palm, Rose, Bougainvillea, Croton,Guldaudi, Dahila,Ghandhraj,Madhukamini,Ixora etc of minimum height of 2-3 ft in garden of CMPDI RI-II as per direction of EIC.
186	Providing and spreading good quality manure,Fertilizer, fungicide, pesticides in required quality such as : Vermi Compost, NPK/DAP ,Mustard Oil Cake, Bone meal,Humic Acid, trichoderma, Dimethoate 30%, Neem oil, etc. as per instruction of EIC.
187	Supplying of fiber pot (Dia : 12 inches, 10 l capacity) with undertray as per direction of E.I.C.
188	Supply of cement pot (Dia: 13inches, 15 l capacity) as per direction of E.I.C.
189	Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): 12 mm thick
190	Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes, shelves, racks, almirah,cupboard and drawer etc. including necessary nails, screws etc. complete as perdirection of Engineer-in- charge
191	Providing & Fixing decorative high pressure laminated sheet of plain / wood grain gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality 1.0 mm thick
192	Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground within 50 meters lead :Door chowkhats
193	Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
194	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) - Sal wood
195	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
196	Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width
197	Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately)
198	Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws, etc. complete.
199	Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece
200	Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge
201	Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
202	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
203	Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trussesetc., including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer, including welding and bolted with special shaped washers etc.complete.Hot finished welded type tubes
204	Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels,plates etc., including welding, grinding, buffing, polishing and making curvature(wherever required) and fitting the same with necessary stainless steel nuts and boltscomplete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners stainless steel bolts etc., of required size, on the top of the floor or the side of waist slabwith suitable arrangement as per approval of Engineer-in-charge, (forpaymentpurposeonly weight of stainless steel members shall be considered excluding fixing accessoriessuch as nuts, bolts, fasteners etc.).
205	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work,including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer all complete.
206	Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material - Beyond 30 cm girth upto and including 60 cm girth
207	Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material - Beyond 60 cm girth upto and including 120 cm girth
208	Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material - Beyond 120 cm girth upto and including 240 cm girth
209	Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with :5.5 mm thick glass panes
210	Renewal of old putty of glass panes (length)
211	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)
212	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately): For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
213	Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
214	Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks)
215	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm
216	Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm
217	Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.
218	Providing and fixing aluminium extruded section body tubular type universal hydraulicdoor closer (having brand logo with ISi, IS : 3564, embossed on the body, door weightupto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speedadjustment with necessary accessories and screws etc. complete.
219	Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets,20 mm dia (heavy type)
220	Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
221	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm
222	Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete :Twin rubber stopper
223	Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete 100X58X1.90 mm
224	Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) withstainless steel screws etc. complete : 75x50x2.50 mm
225	Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in- charge.
226	Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete
227	Dismantling G. I. pipes (external work) including excavation and refilling trenches after taking out the pipes, including stacking of pipes within 50 metres lead :15 mm to 40 mm nominal bore.
228	Dismantling of flushing cistern of all types (C.I. /PVC/Vitrous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
229	Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete - 10 litre capacity-White
230	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion - Single socketed pipes. - 75 mm diameter.
231	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion - Single socketed pipes. - 110 mm diameter.
232	Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion - Bend 87.5° - 75 mm bend.
233	Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion - Shoe (Plain) - 75 mm shoe.
234	Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete - 75 mm.
235	Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete - 110 mm.
236	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5°, 110 mm bend
237	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (Shoe Plain) 110 mm Shoe
238	Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 75 mm
239	Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 110 mm
240	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.
241	Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board :610x460 mm bowl depth 200 mm.
242	Providing and fixing white vitreous china water closet squatting pan (Indian type) - Orissa pattern W.C . pan of size 580x440 mm.
243	Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.
244	Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid
245	Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.: 15 mm nominal bore, 105 mm long, weighing not less than 138 gms
246	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete - Flexible pipe : 32mm dia
247	Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms
248	providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
249	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm
250	Providing and fixing unplasticised PVC connection pipe with brass unions - 45 cm length - 15 mm dia. nominal bore.
251	Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
252	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge Internal work, Exposed on wall 15 mm nominal outer dia Pipes
253	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes
254	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal outer dia Pipesmm nominal dia Pipes
255	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply including all CPVC plain & brass threaded fittingsThis includes jointing of pipes & fittings with one step CPVC solvent cement, trenching,refilling & testing of joints complete as per direction of Engineer in Charge. External work 32 mm nominal dia Pipes
256	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply including all CPVC plain & brass threaded fittingsThis includes jointing of pipes & fittings with one step CPVC solvent cement, trenching,refilling & testing of joints complete as per direction of Engineer in Charge. External work 40 mm nominal dia Pipes
257	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply including all CPVC plain & brass threaded fittingsThis includes jointing of pipes & fittings with one step CPVC solvent cement, trenching,refilling & testing of joints complete as per direction of Engineer in Charge. External work 65 mm nominal dia Pipes
258	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, havingthermal stability for hot & cold water supply, including all CPVC plain &brass threaded fittings, i/cfixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solventcement and the cost of cutting chases and making good thesameincluding testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the wallsetc.15 mm nominal outer dia Pipes
259	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, havingthermal stability for hot & cold water supply, including all CPVC plain &brass threaded fittings, i/cfixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solventcement and the cost of cutting chases and making good thesameincluding testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the wallsetc.20 mm nominal outer dia Pipes
260	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 40mm
261	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 65 mm dia nominal bore
262	Providing and fixing C. P. brass bib cock of approved quality conforming to IS:8931 - 15 mm nominal bore.
263	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15mm nominal bore
264	Providing and fixing PTMT pillar cock of approved quality and colour, 15 mm nominal bore, 107 mm long, weighing not less than 110 gms
265	Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 90 mm long, weighing not less than 93 gms
266	Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2\\" BSP thread and shapes, weighing not less than 60 gms.
267	Providing and fixing PTMT urinal cock of approved quality and colour 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms
268	Providing and fixing G.I. Union in existing G.I. pipe line, cutting andthreading the pipe and making long screws, including excavation,refilling the earth or cutting of wall and making good the same complete wherever required : 40 mm nominal bore
269	Providing and fixing G.I. Union in existing G.I. pipe line, cutting andthreading the pipe and making long screws, including excavation,refilling the earth or cutting of wall and making good the same complete wherever required : 65 mm nominal bore
270	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25mm
271	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20mm
272	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40mm
273	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :65mm
274	Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
275	Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metre lead. For thickness of tiles above 10 mm and upto 25 mm
276	Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
277	Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.
278	Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m inwidth or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. - All kinds of soil.
279	Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
280	Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in charge - Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix
281	Demolishing R .C.C. work, including stacking of steel bars and disposal o f unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
282	Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement – All work upto plinth level: 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 gradedstone aggregate 20 mm nominal size derived from natural sources)
283	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
284	Reinforced cement concrete work in walls (any thickness), including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, postsand struts etc. above plinth level up to floor five level, excluding cost of centering,shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 gradedstone aggregate 20 mm nominal size derived from natural sources)
285	Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform
286	Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers
287	Centering and shuttering including strutting, propping etc. and removal of form for :Columns, Pillars, Piers, Abutments, Posts and Struts
288	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and Medium Tensile steel bars
289	Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)
290	Half brick masonry with bricks of class designation 75 in superstructure above plinth level upto floor V level in: Cement mortar 1:4 ( 1 cement : 4 coarse sand).
291	Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand)
292	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand)
293	12 mm cement plaster of mix : 1:4 (1 cement : 4fine sand).
294	Neat cement punning.
295	15 mm cement plaster on rough side of single or half brick wall of mix : 1:4(1 cement: 4 coarse sand)
296	Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
297	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
298	Applying priming coat : With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).
299	Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works.
300	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
301	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work.
302	Finishing walls with Acrylic Smooth exterior paint of required shade Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface
303	Finishing walls with Acrylic Smooth exterior paint of required shade,New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coatof exterior primer applied @ 2.20 kg/10 sqm)
304	Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats
305	Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface:water thinable cement primer
306	White washing with lime to give an even shade :Old work (two or more coats)
307	Providing, mixing and applying bonding coat of approved adhesiveon chipped portion of RCC as per specifications and direction ofEngineer-In-charge complete in all respect.SBR Polymer (@10% of cement weight) modifiedcementitious bond coat @ 2.2 kg cement per sqm ofsurface area mixed with specified proportion of approved polymer
308	Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. with cement mortar 1:4 (1 cement : 4 fine sand)
309	Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with waterproofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed withwater proofing cement compound @ 0.253 kg/ sqm. This layerwill be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed withwater proofing cement compound @ 0.126 kg/sqm. This layerwill be allowed to air cure for 4 hours followed with water curing for 48 hours.
310	Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.
311	Providing and fixing double scaffolding system (cup lock type) onthe exterior side of building/structure, upto 25 metre height, aboveground level, including additional rowsofscaffolding in stepped manneras per requirement of site, made with 40mm dia M.S. tube, placed1.5 metre centre to centre, horizontal & vertical tubes joint with cup& lock system with M.S. Tubes, M.S. tube challis, M.S. clamps andstaircase system in the scaffolding for working platform etc. andmaintaining it in a serviceable condition for execution of work ofcleaning and/ or pointing and/ or applying chemical and removing itthereafter. The scaffolding system shall be stiffened with bracings,runners, connecting with the building etc, wherever required, if feasible,for inspection of work at required locations with essential safetyfeatures for the workmen etc., complete asper directions and approvalof Engineer-in-charge.Note:- (1) The elevational area of the scaffolding shall be measuredfor payment purpose. (2) The payment will be made once only for execution of all items for such works.
312	Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 micronsminimum to avoid scratches during transportation and should besupplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tappingscrews of size (5.5x 55 mm) with EPDM seal, complete upto anypitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shape wherever required.
313	Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks
314	Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. andrepairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishingcomplete so as to make it leak proof.
315	Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to anypitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.Iplain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. Thesheetsshall be manufactured out of 2400 TEX panel rovigs incorporating minimum0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured.They shall be of uniform pigmentation and thickness withoutairpocketsandshallconformtoIS 10192 and IS 12866.The sheets shall be opaque or translucent, clear orpigmented, textured or smooth as specified. 2 mm thick flat
316	Lettering with black Japan paint of approved brand and manufacture
317	Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.
318	Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading
319	Resetting of ALUMINIUM door shutter including cutting adjusting of shutter with cost of materials like screw, PVC/neoprane gasket nail, aluminium snap beading fevicol etc all complete as per instruction of EIC
320	Cutting of existing glass at top corner of one glass window of required size for AC refrigerant line and outlet drainage pipe etc all complete as per instruction of EIC
321	Providing and fixing good quality Cotton Curtain cloth of approved stantdard as per direction of EIC. Complete in all respect.
322	Providing and fixing C.P. 2 in 1 Bibcock, 15 mm nominal bore of approved brand as per direction of Engineer in Charge.
323	“Providing and fixing Aluminium Composite Panel (ACP) sheet of , colour, and shade, fixed to frame, backing or studding with suitable screws, and necessary fittings, complete for use in ventilator, window A.C. cover or wherever required, all as per direction of Engineer-in-Charge.
324	Providing and fixing CP jet spray (Facuet) for European water closet as per EIC.
325	Providing and fixing C. P. pillar cock 15 mm nominal bore as per EIC.
326	Repairing the joints of wall or floor tiles by raking out / removing old, loose and broken grouting, thoroughly cleaning the joints, refilling the same with epoxy grout of approved make and colour, all complete as per direction of Engineer-in-Charge.”
327	Providing and fixing C.P.Towel rail 24\\" make continental as per direction of EIC
328	Providing & fixing Stainless steel jali 100mm as per direction instruction of Engineer in charge
329	Providing & fixing Upvc ball valve 25mm as per direction instruction of Engineer in charge
330	Providing and fixing Brass laboratory tap/cock for Environmental Laboratory, complete, as per directions of the Engineer-in-Charge.
331	Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m inwidth or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. - All kinds of soil
332	Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
333	Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material - Beyond 30 cm girth up to and including 60 cm girth.
334	Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material - Beyond 60 cm girth upto and including 120 cm girth
335	Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material - Beyond 120 cm girth upto and including 240 cm girth
336	Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks
337	Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. andrepairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishingcomplete so as to make it leak proof.
338	Dismantling G. I. pipes (external work) including excavation and refilling trenches after taking out the pipes, including stacking of pipes within 50 metres lead :15 mm to 40 mm nominal bore.
339	Dismantling G. I. pipes (external work) including excavation and refilling trenches after taking out the pipes, including stacking of pipes within 50 metres lead :Above 40 mm nominal bore
340	Dismantling of flushing cistern of all types (C.I. /PVC/Vitrous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
341	Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete - 10 litre capacity-White
342	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion - Single socketed pipes. - 75 mm diameter.
343	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion - Single socketed pipes. - 110 mm diameter.
344	Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion - Bend 87.5° - 75 mm bend.
345	Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion - Shoe (Plain) - 75 mm shoe.
346	Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete - 75 mm.
347	Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete - 110 mm.
348	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5°, 110 mm bend
349	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (Shoe Plain) 110 mm Shoe
350	Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 75 mm
351	Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 110 mm
352	Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 75x75x75 mm Tee with door
353	Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110x110x110 mm Tee with door
354	Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 75x75x75 mm Tee without door
355	Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110x110x110 mm Tee without door
356	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.
357	Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mmPTMT waste coupling of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever required. White Vitreous China Flat backwash basin size 550x400 mm with single 15 mm PTMT pillar cock.
358	Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board :610x460 mm bowl depth 200 mm.
359	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm
360	Providing and fixing white vitreous china water closet squatting pan (Indian type) - Orissa pattern W.C . pan of size 580x440 mm.
361	Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.
362	Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid
363	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete - Flexible pipe : 32mm dia
364	Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms
365	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm
366	Providing and fixing unplasticised PVC connection pipe with brass unions - 45 cm length - 15 mm dia. nominal bore.
367	Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
368	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge Internal worK 15 mm nominal outer dia Pipes
369	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes
370	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes
371	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 32 mm nominal dia Pipes
372	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, havingthermal stability for hot & cold water supply, including all CPVC plain &brass threaded fittings, i/cfixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solventcement and the cost of cutting chases and making good thesameincluding testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the wallsetc.20 mm nominal outer dia Pipes
373	Providing and fixing C.P. brass shower rose with 15 or 20 mm inletc : 100 mm diameter
374	Providing and fixing C. P. brass bib cock of approved quality conforming to IS:8931 - 15 mm nominal bore.
375	Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms
376	Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 90 mm long, weighing not less than 93 gms
377	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15mm nominal bore
378	Providing and fixing C. P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 - 15 mm nominal bore.
379	Providing and fixing PTMT angle stop cock 15 mm nominal bore,weighing not less than 85 gms
380	Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms
381	Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge
382	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore
383	Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2\\" BSP thread and shapes, weighing not less than 60 gms.
384	Providing and fixing PTMT urinal cock of approved quality and colour 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms
385	Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metre lead. For thickness of tiles above 10 mm and upto 25 mm
386	Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
387	Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.
388	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Raj Nagar plain white marble/Udaipur green marble/Zebra black marble Area of slab over 0.50 sqm
389	Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.
390	Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below.
391	Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metres
392	Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:Of area 3 sq. metres and below.
393	Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
394	Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground within 50 meters lead :Door chowkhats
395	Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground within 50 meters lead :window chowkhats
396	Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete :115 mm
397	Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
398	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) - Sal wood
399	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
400	Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :30 mm thick shuttersKiln seasoned and chemically treated hollock wood
401	Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 m) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineerin- charge: Extruded section profile size 48x40 mm
402	Providing and fixing to existing door frames.24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).
403	Providing and fixing factory made single extruded WPC (Wood Polymer Composite)solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virginPVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnaturalfibers(woodpowder/ rice husk/wheat husk) and non toxic additives (maximum toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cementandscrewed with full body threaded starheadedSSscrewshavingminimumframedensityof750kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge),minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 andresistance to spread of flame of Class A category with property of being termite/borerproof, water/moisture proof and fire retardant and fixed in position with M.S holdfast/lugs/SS dash fasteners of required dia and length complete as per direction ofEngineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid forseparately). Note: For WPC solid door/window frames, minus 5mm tolerance indimensions i.e. depthand width of profile shall be acceptable. Variation in profiledimensions onplussideshall beacceptable but no extra payment on this account shall bemade. Frame size 65 x 100 mm
404	Providing and fixing factory made single extruded WPC (Wood Polymer Composite)solid board one side white colour and other side of board laminated with PVC foil ofminimum 14 micron thickness of approved design pasted with hot melt adhesive forcupboards,work stations and bathroom/kitchen cabinet etc. of required sizes comprising ofvirgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and nontoxicadditives(maximumtoxicityindex of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawalstrength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2,modulus of elasticity 850 N/mm2 and resistance to spreadof flame of Class A categorywith property of being termite/borer proof, water/moisture proof and fire retardant andfixing with stainless steel piano hinges/soft close clip on concealed hinges of requiredsize with necessary full body threaded star headedcounter sunk S.S screws, all as perdirection of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip onconcealed hinges and necessary S.S screws shall be paid separately) 18 mm thick
405	Providing and fixing factory made single extruded WPC (Wood Polymer Composite)solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virginPVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnaturalfibers(woodpowder/ rice husk/wheat husk) and non toxic additives (maximum toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cementandscrewed with full body threaded starheadedSSscrewshavingminimumframedensityof750kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge),minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 andresistance to spread of flame of Class A category with property of being termite/borerproof, water/moisture proof and fire retardant and fixed in position with M.S holdfast/lugs/SS dash fasteners of required dia and length complete as per direction ofEngineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid forseparately). Note: For WPC solid door/window frames, minus 5mm tolerance indimensions i.e. depthand width of profile shall be acceptable. Variation in profiledimensions onplussideshall beacceptable but no extra payment on this account shall bemade. Frame size 45 x 70 mm
406	Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete 100X58X1.90 mm
407	Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) withstainless steel screws etc. complete : 75x50x2.50 mm
408	Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 10 mm
409	Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
410	Providing & Fixing decorative high pressure laminated sheet of plain / wood grain gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality 1.0 mm thick
411	Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading
412	Providing and fixing aluminium work for doors, windows, ventilators and partitions withextruded built up standard tubular sections/ appropriate Z sections and other sections ofapproved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners ofrequired dia and size, including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sectionsshall be smooth, rust free, straight, mitred and jointed mechanically wherever requiredincluding cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass /stainless steel screws, all complete as per architectural drawings and the directions ofEngineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For fixed portion:Powder coated aluminium (minimum thickness of powder coating 50 micron)
413	Providing and fixing aluminium work for doors, windows, ventilators and partitions withextruded built up standard tubular sections/ appropriate Z sections and other sections ofapproved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners ofrequireddia and size, including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sectionsshall be smooth, rust free, straight, mitred and jointed mechanically whereverrequiredincluding cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass /stainless steel screws, all complete as per architectural drawings and the directions ofEngineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost ofEPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
414	Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width
415	Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately)
416	Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides
417	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)
418	Providing and fixing M. S. grills of required pattern in frames of windows etc. with M. S. flats, square or round bars etc. Including priming coat of approved steel primer all complete - Fixed to steel windows by welding.
419	Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trussesetc., including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer, including welding and bolted with special shaped washers etc.complete.Hot finished welded type tubes
420	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
421	Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws, etc. complete.
422	Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm
423	Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece
424	Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge
425	Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 micronsminimum to avoid scratches during transportation and should besupplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tappingscrews of size (5.5x 55 mm) with EPDM seal, complete upto anypitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shape wherever required.
426	Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheetgutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete 0.63 mm thick with zinc coating not less than 275 gm/m²
427	Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of G.S. Sheet
428	Welding by gas or electric plant including transportation of plant at site etc. complete.
429	Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm.
430	Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete 300x16 mm
431	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm.
432	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete : 100x10 mm.
433	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100 mm
434	Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm
435	Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete :Twin rubber stopper
436	Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
437	Applying one coat of water thinable cement prime rof approved brand and manufacture on wall surface:water thinable cement primer
438	Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats
439	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
440	Applying priming coat : With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).
441	Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works.
442	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
443	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work.
444	Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirtresistance exterior paint of required shade (Company Depot Tinted) with siliconadditives New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including primingcoat of exterior primer applied @ 0.90 litre/10 sqm
445	White washing with lime to give an even shade :New work (three or more coats)
446	Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in charge - Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix
447	Demolishing R .C.C. work, including stacking of steel bars and disposal o f unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
448	Demolishing brick work, manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge - In Cement mortar.
449	Providing and laying in position cement concret of specifie dgrade excludin gthecostof centering and shuttering - All work up to plinth level1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stoneaggregate 20 mm nominal size derived from natural sources)
450	Dismantling old plaster or skirting raking out joints ,chipping of old floor and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
451	Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)
452	Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement – All work upto plinth level: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
453	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
454	Reinforced cement concrete work in walls(anythickness), includingattached pilasters, buttresses, plinth and stringcourses, fillets, columns, pillars, piers, abutments, postsand struts etc. aboveplinth level up to floor five level, excludingcost of centering shuttering,finishing and reinforcement 1:1.5:3 (1cement :1.5coarsesand(zone-III)derivedfromnatural sources :3graded stone aggregate 20 mm nominal size derived from natural sources).
455	Centering and shuttering including strutting, propping etc. and removal of form for :Weather shade, Chajjas, corbels etc., including edges
456	Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform
457	Centering and shuttering including strutting, propping etc. and removal of form for;Columns, Pillars, Piers, Abutments, Posts and Struts
458	Centering and shuttering including strutting, propping etc. and removal of form for;Lintels, beams, plinth beams, girders, bressumers and cantilever
459	Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominalsize) over 75mm thick bed of dry brick ballast 40 mm nominal size,well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth
460	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and Medium Tensile steel bars
461	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work,including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer all complete.
462	Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand)
463	Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)
464	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand)
465	Half brick masonry with bricks of class designation 75 in superstructure above plinth level upto floor V level in: Cement mortar 1:4 ( 1 cement : 4 coarse sand).
466	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete - 40 mm thick with 20 mm nominal size stone aggregate
467	12 mm cement plaster of mix : 1:4 (1 cement : 4fine sand).
468	Neat cement punning.
469	15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand)
470	Providing, mixing and applying bonding coat of approved adhesiveon chipped portion of RCC as per specifications and direction ofEngineer-In-charge complete in all respect.SBR Polymer (@10% of cement weight) modifiedcementitious bond coat @ 2.2 kg cement per sqm ofsurface area mixed with specified proportion of approved polymer
471	Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumpinground, all complete as per direction of Engineer-in-Charge. with cement mortar 1:4 (1 cement : 4 fine sand)
472	Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with waterproofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed withwater proofing cement compound @ 0.253 kg/ sqm. This layerwill be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed withwater proofing cement compound @ 0.126 kg/sqm. This layerwill be allowed to air cure for 4 hours followed with water curing for 48 hours.
473	Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.
474	Providing and fixing double scaffolding system (cup lock type) onthe exterior side of building/structure, upto 25 metre height, aboveground level, including additional rowsofscaffolding in stepped manneras per requirement of site, made with 40mm dia M.S. tube, placed1.5 metre centre to centre, horizontal & vertical tubes joint with cup& lock system with M.S. Tubes, M.S. tube challis, M.S. clamps andstaircase system in the scaffolding for working platform etc. andmaintaining it in a serviceable condition for execution of work ofcleaning and/ or pointing and/ or applying chemical and removing itthereafter. The scaffolding system shall be stiffened with bracings,runners, connecting with the building etc, wherever required, if feasible,for inspection of work at required locations with essential safetyfeatures for the workmen etc., complete asper directions and approvalof Engineer-in-charge.Note:- (1) The elevational area of the scaffolding shall be measuredfor payment purpose. (2) The payment will be made once only for execution of all items for such works.
475	Clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth up to 30 cm measured at a height of 1 mabove ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
476	Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm. by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ltr and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick
477	Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
478	Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge.
479	Supplying and stacking at site. Over burnt (Jhama) brick aggregate 120 mm to 40 mm
480	Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods,watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m : All kinds of soil
481	Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil
482	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS :12701 marked, with cover and suitable locking arrangement and making necessary holesfor inlet, outlet and overflow pipes but without fittings and the base support for tank.
483	Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets,25 mm dia (heavy type)
484	Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work
485	Lettering with black Japan paint of approved brand and manufacture
486	Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointedwith neat cement slurry mixed with pigment to match the shade of tiles, includingrubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement:4coarse sand).Light shade pigment using white cement
487	Providing Gola 75X75 mm in cement concrete 1:2:4(1 cement:2 coarse sand : 4 stone aggregate 10mm and down gauge)including finishing with cement mortar 1:3(1 cement: 3 fine sand)as per standard design.In 75 x 75 mm deep chase
488	Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)
489	“Providing and fixing Aluminium Composite Panel (ACP) sheet of approved make, colour, and shade, fixed to frame, backing or studding with suitable screws, and necessary fittings, complete for use in ventilator, window A.C. cover ,gate or almirah.wherever required, all as per direction of Engineer-in-Charge.
490	Making tribe art on prepainted wall & specified tree trunk etc.
491	Providing and fixing star lock in aluminium glazing sliding shutter as per EIC.
492	Providing and fixing CP jet spray (Facuet)European water closet as per EIC.
493	Providing and fixing C. P. pillar cock 15 mm nominal bore as per EIC.
494	Providing and fixing Nahani trap of size 4\\" x 2 1/2\\" complete as per direction of Engineer in Charge. Single side outlet
495	Providing and fixing C.P.Towel rail 24\\" make continental as per direction of EIC
496	Providing and fixing C.P. 2 in 1 Bibcock complete as per direction of Engineer in Charge.
497	Cleaning of manhole chamber/septic tank (inspection chamber).as per direction of Engineer in Charge.
498	Cleaning blockages etc. in Pans, traps and connected soil waste pipe etc. complete of to; the satisfaction of engneer Incharge.
499	Providing & fixing C.I. bracket for wash basin and sinks instruction of Engineer in charge
500	Repair of water supply and sanitary system for smooth running of the system by plumbing 'Mistry'with all necessary instruments and equipments (excluding materials to be replaced which will be supplied by the 'Institute', but including supply of materials like washers, serews, G. I. bolts & nuts, jute packing, jute/rubber/synthetic gascades, clamp hook, water tight paints for pipe joints, fixing clamps, small brackets etc) as per direction of Engineer-in-Charge.

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents

Also Visit

Tenders

Jharkhand Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Comprehensive Annual Maintenance Contract For Office Building And Residential Building Of Cmpdi Ri-Ii For Two Years., Dhanbad-Jharkhand

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Comprehensive Annual Maintenance Contract For Office Building And Residential Building Of Cmpdi Ri-Ii For Two Years., Dhanbad-Jharkhand

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us