Tender For Annual Operation And Maintenance (Civil And Electrical, With Facility Management Service) For Office And Residential Township For Two Years In Jhingurda Area., Singrauli-Madhya Pradesh

TDR : 55578887

Tender Notice
BOQ

19 Days Left

Singrauli , Madhya Pradesh

Tender Brief : Tender For Annual Operation And Maintenance (Civil And Electrical, With Facility Management Service) For Office And Residential Township For Two Years In Jhingurda Area.

Document Fees
Refer document

EMD
₹ 1440300.0 /-

Tender Value
₹ 11.52 Crore /-

Submission Date
10-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	CIVIL Works
2	Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
3	White washing with lime to give an even shade : Old work (one or more coats).
4	Colour washing such as green, blue or buff to give an even shade : new work (one or more coats). with a base coat of whiting
5	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on OLD work.
6	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on NEW work
7	Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work
8	Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
9	Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer's specification. : One or more coats on old work
10	Finishing walls with Acrylic Smooth exterior paint of required shade: Old work (One or more coat applied @ 0.90 ltr/10 sqm).
11	Lettering with black Japan paint of approved brand and manufacture
12	Providing and pasting of metallica II wallpaper of approved manufacture using fevicaol and other chemicals in proper portion as adhesive for pasting on wall face free from wrinkles and as directed by Engineer in Charge including tools and tackles complete
13	Wall painting / art work
14	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
15	Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm.
16	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Kiln seasoned and chemically treated red marandi wood. 30 mm thick shutters
17	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Kiln seasoned and chemically treated red marandi wood
18	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
19	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws
20	Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.
21	Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 100 mm
22	Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm
23	Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 150x10 mm
24	Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 200x10 mm
25	Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm
26	Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece
27	Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 ms lead : Of area 3 sq. ms and below
28	Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 ms lead : Of area 3 sq. ms and below
29	Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
30	Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): 18 mm thick
31	Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 150 mm
32	Providing and fixing aluminum U beading of required size to Pre-laminated/ flush door shutter, including fixing etc. complete as per direction of Engineer-in-charge.
33	Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 30 mm thick shutters With ISI marked M.S. pressed butt hinges bright finished of required size Kiln seasoned and chemically treated red marandi wood
34	Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 2nd class teak wood beading 62X19 mm
35	Welding by gas or electric plant including transportation of plant at site etc. complete.
36	Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
37	Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
38	35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer- in-charge. Non decorative finish (matt finish)
39	Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 100X58X1.90 mm
40	Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
41	Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
42	Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.
43	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm
44	Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
45	Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. Door chowkhats
46	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
47	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
48	Polishing on wood work with ready made wax polish of approved brand and manufacture : Old work
49	Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work
50	Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately). Pre-laminated with decorative lamination on both side exterior Grade - I MD Board 12 mm thick confirming to IS:14587
51	Small petty carpentry work such as small repair of doors, windows, making hole, fixing of miscellaneous fixtures etc.
52	Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
53	Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)
54	Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.
55	Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : 25 mm dia (heavy type)
56	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
57	Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.\\"
58	Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 10 litre (full flush) capacity-white
59	Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 75 mm outlet Sand cast iron S&S as per IS - 3989
60	Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 630x450 mm
61	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap
62	Providing and fixing 15 mm C.P. brass pillar tap
63	Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: White glazed fire clay kitchen sink of size 600x450x 250 mm
64	Providing and fixing brass bib cock of approved quality : 15 mm nominal bore
65	Providing and fixing brass stop cock of approved quality : 15 mm nominal bore
66	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore
67	Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore
68	Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore
69	Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore
70	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe.32 mm dia
71	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe. 40 mm dia
72	Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length. 15 mm nominal bore. 15 mm nominal bore
73	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore
74	Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White
75	Providing and fixing white vitreous china water closet squatting pan (Indian type) : Long pattern W.C. pan of size 580 mm.
76	Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.
77	Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid
78	Providing and fixing 100 mm sand cast Iron grating for gully trap.
79	Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter
80	Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
81	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern
82	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 15 mm dia nominal bore
83	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 20 mm dia nominal bore
84	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 25 mm dia nominal bore
85	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 32 mm dia nominal bore
86	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore
87	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore
88	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore
89	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore
90	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore
91	Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 100 mm diameter Class I
92	Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 150 mm diameter Class I
93	Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 ms lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore
94	Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 ms lead as per direction of Engineer-in-charge : Above 40 mm nominal bore
95	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL WORK 15 mm nominal outer dia Pipes
96	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL WORK 20 mm nominal outer dia Pipes
97	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL WORK 25 mm nominal outer dia Pipes
98	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL WORK 32 mm nominal outer dia Pipes
99	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL WORK 40 mm nominal outer dia Pipes
100	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL WORK 50 mm nominal outer dia Pipes
101	Providing and fixing gun metal non- return valve of approved quality (screwed end) : 80 mm nominal bore Horizontal
102	Providing and fixing gun metal non- return valve of approved quality (screwed end) : 50 mm nominal bore Horizontal
103	Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 20 mm nominal bore, weighing not less than 40 gms
104	Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 25mm nominal bore, weighing not less than 62 gms
105	Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 m long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
106	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
107	Providing and fixing PTMT, push cock of approved quality and colou 15 mm nominal bore, 98 mm long, weighing not less than 75 gms
108	Providing and fixing of C.I Sluice Valve : 80 mm dia
109	Providing and fixing of C.I Sluice Valve : 50 mm dia
110	Providing and fixing of G.I Elbow 15 mm dia
111	Providing and fixing of G.I Elbow 20 mm dia
112	Providing and fixing of G.I Elbow 25 mm dia
113	Providing and fixing of G.I Elbow 40 mm dia
114	Providing and fixing of G.I Socket and Reducing Socket 20 mm to 15mm
115	Providing and fixing of G.I Socket and Reducing Socket 25 mm to smaller size
116	Providing and fixing of G.I Socket and Reducing Socket 40 mm to any smaller size
117	Providing and fixing of G.I Tee equal 15 mm dia
118	Providing and fixing of G.I Tee equal 20 mm dia
119	Providing and fixing of G.I Tee equal 25 mm dia
120	Providing and fixing of G.I Tee equal 40 mm dia
121	Providing and fixing of G.I Nipple 100 mm long 15 mm dia
122	Providing and fixing of G.I Nipple 100 mm long 20 mm dia
123	Providing and fixing of G.I Nipple 100 mm long 25 mm dia
124	Providing and fixing of G.I Nipple 100 mm long 40 mm dia
125	Providing and fixing of G.I Union 15 mm dia
126	Providing and fixing of G.I Union 20 mm dia
127	Providing and fixing of G.I Union 25 mm dia
128	Providing and fixing of G.I Plug 15 mm
129	Providing and fixing of G.I Plug 20 mm
130	Providing and fixing of C.P brass waste 32 mm dia
131	Providing and fixing of C.P brass waste 40 mm dia
132	Providing and fixing of Bolts and Nuts 16 mm dia 65 mm Long
133	Providing and fixing of Adhesive solution UPVC (237ml)
134	Providing and fixing of Spendle with washer for pillar cock
135	Providing and fixing of UPVC Coupler 50 mm
136	Providing and fixing of UPVC Coupler 25 mm
137	Providing and fixing of PVC Washer
138	Providing and fixing of UPVC PIPE 50MM DIA
139	Providing and fixing of UPVC Pipe 25mm dia
140	Providing and fixing of UPVC Flange 50mm dia
141	Providing and fixing of UPVC Flange 80mm dia
142	Providing and fixing of UPVC Fittings Elbow 25 mm
143	Providing and fixing of UPVC Fittings Elbow 50 mm
144	Providing and fixing of Ball Valve (UPVC) : 25 mm dia
145	Providing and fixing of Ball Valve (UPVC) : 50 mm dia
146	Providing and fixing of Reducer Tee 50x25mm
147	Providing and fixing of End Cap : 25mm dia
148	Providing and fixing of End Cap : 50 mm dia
149	Providing and fixing of CPVC fitting : Coupling : 15mm dia
150	Providing and fixing of CPVC fitting : Coupling : 20mm dia
151	Providing and fixing of CPVC fitting : Coupling : 25mm dia
152	Providing and fixing of Elbow : 15mm dia
153	Providing and fixing of Elbow : 20mm dia
154	Providing and fixing of Elbow : 25mm dia
155	Providing and fixing of Tee 25x25x20mm
156	Providing and fixing of Reducing Coupling
157	Providing and fixing of Ball Valve 20mm
158	Providing and fixing of Adhesive solution for CPVC (237ml)
159	Repairing of sluice valve including brazing maching, welding etc. of spidinle check nut, bolts etc. including refixing the same as per the instruction fo engineer in charge 50 mm Size
160	Repairing of sluice valve including brazing maching, welding etc. of spidinle check nut, bolts etc. including refixing the same as per the instruction fo engineer in charge 80 mm Size
161	Repairing of sluice valve including brazing maching, welding etc. of spidinle check nut, bolts etc. including refixing the same as per the instruction fo engineer in charge 150 mm
162	Providing steel spindle for different size sluice valve 50 mm to 80 mm size
163	Providing steel spindle for different size sluice valve 100 mm to 125 mm size
164	Providing M.S welding rod of size 3.15 mm
165	Proving and supplying Gland packing (rope) of ISI Mark/aproved quality as instruction of engineer in charge.
166	Providing and fixing Unplasticised Polyvinyl Chloride (UPVC) pipes (SCH-80), for water supply including all UPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step UPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External Works 80mm nominal inner dia
167	Providing and fixing Unplasticised Polyvinyl Chloride (UPVC) pipes (SCH-80), for water supply including all UPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step UPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External Works 100mm nominal inner dia
168	Providing and fixing Unplasticised Polyvinyl Chloride (UPVC) pipes (SCH-80), for water supply including all UPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step UPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External Works 150mm nominal inner dia
169	Providing and supplying of UPVC Fittings : UPVC Socket : 80 mm nominal Size
170	Providing and supplying of UPVC Fittings : UPVC Socket : 100 mm Nominal Size
171	Providing and supplying of UPVC Fittings : UPVC Socket : 150 mm Nominal Size
172	UPVC Flange 100mm Nominal Size
173	UPVC Flange 150mm Nominal Size
174	UPVC Elbow 90 Degree 80mm nominal Size
175	UPVC Elbow 90 Degree 100mm Nominal Size
176	UPVC Elbow 90 Degree 150mm Nominal Size
177	Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 100 mm outlet. Sand Cast Iron S&S as per IS: 1729
178	Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 122mm long, weighing not less than 99 gms.
179	Providing and fixing PTMT stop cock of approved quality and colour. Concealed stop cock, 15 mm nominal bore, 108 mm long, weighing not less than 108 gms
180	Providing and fixing PTMT stop cock of approved quality and colour. 20 mm nominal bore, 89 mm long, weighing not less than 88 gms.
181	Providing and fixing PTMT pillar cock of approved quality and colour, 15 mm nominal bore, 107 mm long, weighing not less than 110 gms.
182	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work. : 100 mm dia nominal bore
183	Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms
184	Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100x100x100 mm : Sand cast iron S&S as per IS - 1729
185	Providing and fixing soil, waste and vent pipes : 100 mm dia : Sand cast iron S&S pipe as per IS: 1729
186	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x460 mm bowl depth 200 mm
187	Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
188	Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia
189	Providing and fixing PTMT grating of approved quality and colour. Circular type 125 mm nominal dia with 25 mm waste hole
190	Lifting the damage submersible pump and motor, cable etc. replacing it with working one and lowering the pump and motor assembly including cable in bone holes, dismantling the pipe during lifting and fixing the pipe during lowering with all materials and labour tools and lants etc. complete as per Instruction of engineer in charge.
191	Repairing of submersible pump & motor with motor winding of submersible pump set i/c changing of oil seal, rotor bush o-ring impeller etc as required with a gurantee period of Six month. (5 HP to 7.5 HP)
192	Providing G.I Socket, 50 mm dia size long thread of heavy duty.
193	Supply of Submersible cable of ISI Marked and approved quality of 4 sqm as per instruction of E/I.
194	Providing m-seal of approved quality
195	Providing and fixing GI Flange of heavy duty : 50 mm dia size
196	Providing and fixing GI Flange of heavy duty : 80 mm dia size
197	Providing and fixing GI Flange of heavy duty : 100 mm dia size
198	Providing and fixing GI Pipe (Medium Quality) : 100 mm dia size
199	Providing and fixing water tank cover
200	Providing and fixing handle and lever level cistern
201	Providing and fixing float valve for low level cistern
202	Providing and fixing syphon for low level cistern
203	Providing and fixing GI Pipe (Medium Quality) : 125 mm dia size
204	Cleaning of overhead tank of capacity more than 50000 litres
205	Cleaning of ground reservoir tank
206	Small petty water supply related works.
207	Providing and fixing GI flange of heavy quality. : 150 mm dia size
208	Providing and fixing non- return valve (CI) of approved quality : 150 mm diameter
209	Maintenace of pipeline of colony area on day to day basis (materials such as fittings, flange, gasket etc. will be supplied by the department) complete as per the instruction of engineer in charge (2 no. semi-skilled labourer and 3 no. unskilled i.e. 5 no. labourers per day). Deduction will be done at double rate in case of non/less deployment of labour on pro rata basis.
210	Deploy/Engaging labour for Supply of water in entire colony area, workshop, regional store including service building and welfare buildings etc as per instruction of engineer in charge including cost of tools and tackels, torch cell etc. (4 no. of unskilled labourer as valve men in each shift, i.e. 12 no. per day). Deduction will be done at double rate in case of non/less deployment of labour on pro rata basis.
211	Operational of Submersible Pump (7 No.) at different locations inside colony area (No. of shifts - 2, No. of unskilled labourer in each shift - 2, i.e. total 4 no. per day). Deduction will be done at double rate in case of non/less deployment of labour on pro rata basis.
212	Facility Manager for heading the entire facility team of Office and Residential Complex and Single point of contact & overall in charge of on-site Operations and reporting to engineer-in-charge or his representative. 01 no per day
213	Assistant Facility Manager (Technical) for supporting Critical Services Operations & reporting to Facility Manager. (Civil Maintenance Works: 01 no., Electrical Maintenance Works: 01 no.)
214	Up keeping & maintenance of dispensary in all respect by engaging one no. man power per day
215	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
216	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
217	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
218	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size).
219	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)
220	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natu- ral sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
221	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
222	Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but, excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
223	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Cold twisted bars
224	Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
225	Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
226	Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
227	Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
228	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
229	12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)
230	12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
231	6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand)
232	Neat cement punning.
233	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter
234	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5°. 110 mm bend
235	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular tank
236	Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
237	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
238	Providing and laying matt finished vitrified tile of Size 300x300x9.8mm having water absorption less then 0.5% and conforming to IS: 15622 of approved make in all colour and sheds in outdoor floors such as footpath. Courtyard multy models etc laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shape with groutting the joints with white cement
239	Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm
240	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm
241	Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
242	Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
243	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
244	Brick work with (non modular) FALG bricks conforming to IS:12894, of class designation 7.5 average compressive strength etc. complete in all respect in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)
245	Brick work with (non modular) FALG bricks conforming to IS:12894, of class designation 7.5 average compressive strength etc. complete in all respect in superstructure above plinth level up to floor V level in all shapes and sizes in:Cement mortar 1:6 (1 cement : 6 coarse sand)
246	Half brick masonry with (non modular) FALG bricks conforming to IS:12894, of class designation 7.5 average compressive strength etc. complete in all respect in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand)
247	Providing and laying 25 mm thick CC flooring with 1:2:4 (1 cement : 2 sand : 4 aggregrate)
248	Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 ms lead .thickness of tiles 10 mm to 25 mm.
249	Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 ms lead as per direction of Engineer-in-charge.
250	Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 ms lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
251	Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 ms lead.
252	Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 ms lead as per direction of Engineer-in-charge. In cement mortar
253	Providing and fixing stainless steel (grade 304) railing made of hollow tubes, channals, plates, etc. includding welding, grinding, buffing, pollising and macking curvature (where-ever required) and fitting the same with nessaseary assesary and stainless and bolts complete, i/c fixing the railing with necessary accesoris and stainless steel dash fastner, stainles steel bolts, etc of required size on the top of the floor or the side of waist slab with shutable arraengment as per approvel of I/C (For the payment purpose only weight of steenless steel mambers shall be considerd excludding fixiing accessary such as nuts bolts and fasner etc)
254	Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
255	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels -Granite of any colour and shade Area of slab over 0.50 sqm
256	Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
257	Cleaning, mopping & washing of floor of public buildings other places neatly with detergents, bleaching power etc. all complete with tools, tackles and consumable to make the floor clean & hygienic as per instruction of EIC.
258	Cleaning of surface drain including disposal of muck sludge through trolley or other arrangements to a specified place (in no case it shall be kept on drain banks) within a lead of 1 KM complete with all tools & tackles as per instruction of EIC. Upto 300 mm wide
259	Cleaning of surface drain including disposal of muck sludge through trolley or other arrangements to a specified place (in no case it shall be kept on drain banks) within a lead of 1 KM complete with all tools & tackles as per instruction of EIC. Upto 300 mm to 600 mm widewide
260	Cleaning of surface drain including disposal of muck sludge through trolley or other arrangements to a specified place (in no case it shall be kept on drain banks) within a lead of 1 KM complete with all tools & tackles as per instruction of EIC. Above 600 mm wide
261	Brooming& cleaning of all roads in colony and within the premises of service buildings and other places as required with all tools & tackles and stacking the garbage at specified place as per instruction of EIC.
262	Disposal of dead animal big size including transportation to the specified places making earth pit, disposal of dead animal into pit with adequate quantity of salt lime and bleaching powder etc. and refilling the pit with earth all complete with tools and tackles and consumables as per instruction of EIC.
263	Disposal of dead animal small size including transportation to the specified places making earth pit, disposal of dead animal into pit with adequate quantity of salt lime and bleaching powder etc. and refilling the pit with earth all complete with tools and tackles and consumables as per instruction of EIC.
264	Carriage and disposal of garbage etc collected at various places , outside premises with all lead& lift. Tools and tackles all complete as per instruction of EICincluding loading and unloading with all leads
265	Collection of garbage from door to door and disposal of the same through trolley or other suitable arrangement to the specified place within a lead of 1 KM including sweeping of stair case (for 1st and 2nd floor qtrs.) with all tools and tackles complete, as per instruction of EIC. ( A ) Ground floor
266	Collection of garbage from door to door and disposal of the same through trolley or other suitable arrangement to the specified place within a lead of 1 KM including sweeping of stair case (for 1st and 2nd floor qtrs.) with all tools and tackles complete, as per instruction of EIC. ( B ) 1st floor
267	Cleaning of general/common toilet including cleaning of WC pan (Indian/European type) wash basin, urinals by hand dusting and cleaning with soap solution, acids, deodorants, phenyl etc. to make the toilet clean and hygienic and providing naphthalene balls in urinals complete with all tools, tackles & consumables as per instruction of EIC.
268	Cleaning of roof top water tank including out water, cleaning, disinfecting the tank by bleaching powder etc and washing the tanks with fresh water, writing of cleaning date with paint on the outer face of the tank complete with tools, tackles and consumables as per instruction of EIC.
269	Cleaning of all types of roofs including removal of dry leaves, weedings and cleaning drain holes, brooming etc all complete with tools and tackles and consumables as per instruction of EIC
270	Supply of 100% Biodegradable Garbage(Carry)bags for biodegaradable waste as per required size and colour as per instruction of EIC bags should be supplied at house
271	Clearing of grass and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared
272	Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
273	Cleaning of bathrooms/ toilet with attached with hostel rooms, office chambers etc. including cleaning of floors, skirting & dado, WC pan(India/European type), wash basin, shelves, mirror and other fittings, if any, by hand dusting and cleaning with soap solution, acids, deodorants, phenyl etc. to make the toilet clean and hygienic and providing naphthalene balls in urinals complete with all tools, tackles & consumables as per instruction of EIC (for community & service building)
274	Cleaning of toilet (Floor area upto 08 Sqm.) including cleaning of dado, skirting, WC pan (Indian type/western type), wash basins, urinals, glass shelves, mirror and other fittings, if any, for ‘C’ type or equivalent Qtrs. including any other wash basin outside the toilet by hand dusting and cleaning with soap solution, acids, deodorants, phenyl etc. to make the toilet clean & hygienic all complete with tools, tackles & consumables as per instruction of Engineer-in-charge.
275	Cleaning of door shutter, windows shutter including chowkhats, window grills, glass panes, cobwebs etc. of service/community buildings with necessary detergents, chemical etc. complete as per instruction of EIC.
276	Carriage of material by mechanical transport etc: Lime, moorum, building rubbish etc: Lead up to 2.00 km
277	Trimming of trees and up rooting of unwanted plants and shrubs upto girth 25 cm up to floor V level with all tools and plants required in wall slab, chajja etc. in shape wherever required with safety precautions and making good the same with plaster as per instruction of EIC including disposal of material/tree roots etc. at the required place all complete.
278	Cutting of branches of tree and stacking of serviceable materials and disposal of unserviceable material: beyond 30 cm girth up to and including 60 cm girth
279	Cutting of branches of tree and stacking of serviceable materials and disposal of unserviceable material: beyond 60 cm girth up to and including 120 cm girth
280	Anti-Adult measures - General Disinfection/Pest Control with new gebneration odourless, colourless insecticides which should be safe for human being and effective for all kind of house insects like mosquitos, house flies, etc. using Residual spray of Deltamethrin 2.5% SC Flow ( K- Othrine or approved equivalent) Insecticides should be sprayed uniformly over the surface of walls, ceiling, etc. frequency Once in Three months. (Will be used alternately with item no. 270)
281	Anti-Adult measures - General Disinfection/Pest Control with new generation odourless, colourless insecticides which should be safe for human being and effective for all kind of house insects like mosquitos, house flies, etc. using Residual spray of Cyfluthrin 5% EW ( Solfac EW 050 or approval equivalent) Insectcides should be sprayed uniformly over the surface of walls, ceiling, etc. Frequency - Once in three Months. (Will be used alternately with item no. 270)
282	Thermal Fogging - Using insecticide Deltamethin 1.25% ULV (KingFog or approved equivalent) mixed with diesel in the ratio of 1:199, for outdoor operation of colony, etc. Frequency - Monthly.
283	Anti Larvae measures - Treatment by using Diflubenzuron 25% WP (Bi-Larv or approved equivalent) solution to be spread as per instruction of EIC.Frequency - Weekly.
284	Diluting and injecting chemical emulsion for POST- CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole : With Chlorpyriphos/Lindane E.C. 20% with 1%concentration.
285	Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
286	Supply of bleaching powder
287	Supply of Phenyl liquid
288	Supply of Toilet air freshner (Odonil or equivalent)
289	Supply of Sanitary toilet cleaner (Harpic or equivalent)
290	Supply of Handwash refill
291	Supply of Phenyl balls
292	Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil
293	Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, hedge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & ertilizers (whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide , Pesticide will be provided by the Department & lawn mover and brush cutter with fuel , other T & P material/articles shall be provided by the contractor.) Permanent office accomodation (as per yard stick 1Mali =1.25Acre)
294	Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, hedge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & ertilizers (whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide , Pesticide will be provided by the Department & lawn mover and brush cutter with fuel , other T & P material/articles shall be provided by the contractor.) Play Ground/ Public Parks (as per yard stick 1Mali =2.00Acre).
295	Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, hedge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & ertilizers (whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide , Pesticide will be provided by the Department & lawn mover and brush cutter with fuel , other T & P material/articles shall be provided by the contractor.) Flats.(as per yard stick 1Mali =1.35Acre)
296	Providing and Displaying Dahlia double kenya variety in different colour well developed with 3 to 4 flowers in half bloom, good foliage stacked with Green painted Bamboo sticks, 45 to 60 cm height in 25 cm Earthen Pot/ Plastic Pot and as per direction of the officer-in-charge.
297	Providing and Displaying Chrysanthemum double variety, well developed, having 45 to 60 cm ht., with 6 and above flowers with half blooming condition, fresh and healthy with bamboo stacking in 25 cm Earthen Pot and as per direction of the officer-in-charge
298	Providing and Displaying Marigold(Tagetes) inca hybrid different colour having 30 cm and above ht., with 6 to 8 flowers in bloom & blooming condition, well developed pot should be fully covered with fresh and healthy, foliage and flowers in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge
299	Providing and Displaying Pansy hybrid sakata in different colour with fresh & healthy foliage well developed in 15 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge
300	Providing and Displaying Salvia dwarf variety with fresh & healthy foliage well developed multi branching in blooming stage in 15 cm Earthen Pot/ Plastic Pot and as per direction of the officer-in-charge.
301	Providing and Displaying Cosmos well developed fresh & healthy 20 to 25 cm ht. attractive colors multi branching at blooming stage in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge
302	Providing and Displaying Gaillardia double hybrid variety well developed 30 to 45 cm ht 20 to 30 fresh & healthy flower with green painted bamboo stick in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
303	Providing and Displaying Kochia well developed fresh & healthy 20 to 25 cm ht. lush green well shaped in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
304	Providing and Displaying Sunflower hybrid well developed 15 to 20 cm ht. with fresh & healthy foliage at blooming stage in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
305	Providing and displaying of Croton Duck foot (Elite) having ht. 45 cm and above with 3 to 4 branches, well developed, fresh and healthy leaves in 25 cm size of Earthen pot/Plastic pot. & as per direction of the officer-in-charge.
306	Providing and displaying of Croton baby golden variety having ht.30 cm and above, well developed with full of fresh and healthy leaves in 20 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
307	Providing and Displaying Travelers palm well developed with fresh & healthy foliage 120 to 150 cm ht. in 35 cm Cement Pot as per direction of the officer-in-charge.
308	Providing and displaying of Araucaria cookie having ht. 60 cm to 75 cm, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 20 cm size of Earthen pot/Plastic pot. & as per direction of the officer-in-charge.
309	Providing and displaying of Areca Palm having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
310	Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : Holes 45 cm dia, and 45 cm deep.
311	Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cost of plant & water) Hedge Plant
312	Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cost of plant & water) Trees Plant
313	Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge. Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 mm.
314	Filling of the following size empty pots with mixture of good earth & manure in the ratio of 2:1 (Two part of Good earth & one port of manure) and placing them on approprite place i/c carriage of earth, manure and pots up to 50 m, as per direction of officer incharge. (The cost of good earth, earthen pots & manure will be paid seperately.) Size of Empty Pots 35cm Top dia, 25cm Bottom Dia & 35cm Perpendicular height
315	Maintenance of potted plants in Cement pots at ground floor in flats and ground floor bungalow, office complex including application of good earth, manure, insecticide, pesticide and fertilizer, removing of dry parts by pruning, cleaning dry leaves and displaying in appropriate place and replacement of broken pots coloring of pots and change of location of pots and replacing with fresh plants as and when required ( Materials provided by the department) as per direction of officer in charge (For Earthen pot 300 Nos)
316	Maintenance of Earthen potted plants in displayed at ground floor only in bungalow, office complex including application of good earth, manure, insecticide, pesticide and fertilizer, removing of dry parts by pruning, cleaning dry leaves and displaying in appropriate place and replacement of broken pots coloring of pots and change of location of pots and replacing with fresh plants as and when required ( Materials provided by the department) as per direction of officer in charge (For Earthen pot 750 Nos)
317	Removal of garden waste by TATA 407 or equivalent including loading/ unloading and carriage upto 1 km lead,complete disposal upto designated place as per direction of officer-in charge .
318	Supply of insecticies/fungicides, pesticides and fertilizers from authorised dealers at site as per instruction of Engineer in charge: DAP
319	Supply of insecticies/fungicides, pesticides and fertilizers from authorised dealers at site as per instruction of Engineer in charge: Bone Meal
320	Supply of insecticies/fungicides, pesticides and fertilizers from authorised dealers at site as per instruction of Engineer in charge: Urea
321	Supply of insecticies/fungicides, pesticides and fertilizers from authorised dealers at site as per instruction of Engineer in charge: Rose mixture
322	Supply of insecticies/fungicides, pesticides and fertilizers from authorised dealers at site as per instruction of Engineer in charge: Neem Cake
323	Supply of insecticies/fungicides, pesticides and fertilizers from authorised dealers at site as per instruction of Engineer in charge: Melathian dust
324	Supply of insecticies/fungicides, pesticides and fertilizers from authorised dealers at site as per instruction of Engineer in charge: Rogar 30%
325	Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).
326	Supplying and spreading of sand in lawn area, including watering, and dressing complete.
327	Supplying and stacking sludge at site including royalty and carriage upto 5 km complete (sludge measured in stacks will be reduced by 8% for payment).
328	Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge
329	Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
330	Topiary cutting/shaping of plant, removing cut materials, cleaning, hoeing of plants complete design hoeing of trees (Topiary) watering manure etc.(excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge. Height of Topiary above 120 cm.
331	Providing and Displaying plants Creeper Rose variety 3 to 4 healthy branch 60 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge.
332	Providing and Displaying plants Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge.
333	Supplying and stacking at site dump manure from approved source, including carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 20 mm.
334	Supply at site good quality pots : Earthen pot of size 12 inch
335	Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Cosmos hybrid
336	Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Dahlia double
337	Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Marigold French Hybrid dwarf
338	Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Marigold Inca hybrid
339	Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Pansy Hybrid
340	Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Petunia hybrid
341	Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Salvia
342	Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Salvia Hybrid different colour
343	Providing and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Kochia
344	Providing and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Cosmos hybrid
345	Providing and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Sunflower Dwarf
346	Providing and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Zinnia hybrid
347	Providing and fixing of starter panel
348	Providing and fixing of starter panel coil
349	Electrical Works
350	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
351	Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required(2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire)
352	Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required(2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire)
353	Wiring for circuit/ sub main wiring along with earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required(2 X 6 sq. mm + 1 X 6 sq. mm earth wire)
354	Supplying and fixing 5A to 32 As rating, 240/415 volts, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(Single Pole)
355	Supplying and fixing 5A to 32 As rating, 240/415 volts, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(Double Pole)
356	Supplying and fixing 5A to 32 As rating, 240/415 volts, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(Triple Pole and Neutral)
357	Supply and fixing of approved make flush type step type electronic fan regulator including connection etc. as required on existing board(100 Watt)
358	Rewinding of fans by copper enameled wire of suitable gauge including all required material, insulation, varnishing, connection leads, oiling .greasing etc complete with testing including dismantling & refitting of fan at site. Scrap old material is not returnable to the department.(Ceiling fan 1200 mm sweep old model)
359	Supply and fixing of 6201 ball bearing of approved make as required as per specification
360	Supply and fixing of 6202 ball bearing of approved make as required as per specification
361	Supply and fixing of 6203 ball bearing of approved make as required as per specification
362	Supply of clamp of different size suitable to existing/ rewinded fan of different size and make
363	Supply of rubber bush of different size suitable to existing/ rewinded ceiling fan of different size and make
364	Supply of PVC steel grip tape 3/4\\" x 10 metres
365	Supply of Empire tape 1\\" x 25 metres
366	Supply of hacksaw blade 300mm x 20mm
367	Supply of Al. Alloy/cadmium plated iron screws, 20 mm
368	Supply of Iron screws, 35 mm X 6 mm
369	Supply of Iron screws, 40 mm X 6 mm
370	Supply of 3 mm thick phenolic laminated sheet
371	Supply of wooden board 4\\"x4\\"x2\\"
372	Supply of wooden board 4\\"x7\\"x2\\"
373	Supply of wooden board 6\\"x8\\"x2\\"
374	Supply of wooden board 8\\"x10\\"x2\\"
375	Supply of GI nut bolt washer as per requirement
376	Supply of Nail 2.5\\"
377	Supply of 16/0.20 mm (0.5 sqmm) twin core FRLS PVC sheathed, flat flexible copper cable
378	Supply of fuse wire 14-20 SWG
379	Supply of ML4 power contactor
380	Supply and installation of heating element 2 KW
381	Supply of I.S.I. Marked iron clad / metal clad double pole switch fuse (conduit entry ) /cable gland entry with two earthing terminals--32 Amps. 250 Volts
382	Supply & fixing of I.S.I.marked Porecelain Rewireable fuse unit of approved make or confirming to I.S.S. 2086-1982(32 Amps/415 Volts)
383	Supply & fixing of I.S.I.marked Porecelain Rewireable fuse unit of approved make or confirming to I.S.S. 2086-1982(63 Amps/415 Volts)
384	Supply & fixing of I.S.I.marked Porecelain Rewireable fuse unit of approved make or confirming to I.S.S. 2086-1982(100 Amps/415 Volts)
385	Supplying and fixing PVC casing and capping (double fold) 20mm x 12mm ISImarked along with accessories on surface etc. as required
386	Supplying and fixing PVC casing and capping (double fold) 32mm x 12mm ISImarked along with accessories on surface etc. as required
387	Supplying and fixing of 40 A, 30 mA rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.
388	Supplying and fixing 5/6 A piano type switch on the existing switch box/cover including connections etc. as required.
389	Supplying and fixing 3 pin 5/6 A piano type socket on the existing switch box/cover including connections etc. as required.
390	Supplying and fixing 15/16 A piano type switch on the existing switch box/cover including connections etc. as required.
391	Supplying and fixing 6 pin 15/16 A piano type socket on the existing switch box/cover including connections etc. as required.
392	Supply and fixing as per specification 20/10Amp 250Volt 3/6 Pin flush type switch socket combined of approved make & ISI marked with necessary material complete
393	Supply and fixing of approved make 6Amp 250Volt 3 pin plug top ISI marked
394	Supply and fixing of approved make 16Amp 250Volt 3 pin plug top ISI marked
395	Supplying and fixing bell push piano type switch on the existing switch box/cover including connections etc. as required.
396	Supplying and fixing call bell/buzzer suitable for single phase, 230 volts, complete as required.
397	Supply and fixing of MPP condenser 2.5 mfd 440 Volt single phase of approved make as required as per specification
398	PVC single core Aluminium 2.5 sq.mm. cable
399	PVC double core Aluminium 4.00 sq.mm. cable
400	PVC double core Aluminium 6.00 sq.mm. cable
401	3x2.5 flexible 1.1 KV grade cable
402	Supply of 1.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable
403	Supply of 4.0 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable
404	3 x 4 sq. mm Copper cable
405	4x4 sq. mm Copper cable
406	3x6 sq. mm Copper cable
407	4x10 sq. mm Copper cable
408	Rewiring in existing surface/concealed rigid steel/PVC nonmetallic conduit with PVC insulated cable with copper multi strand conductor FRLS of ISI marked and other materials as required including replacement of wornout/damaged/missing material, painting etc. complete as per specification. This shall include all work, arrangement required for wiring but shall exclude switch, ceiling rose, fitting etc.(4 X 10.0 sq. mm.)
409	Supply of I.S.I. Marked iron clad / metal clad 63 Amps. 415/500 Volts triple pole and neutral switch fuse (conduit entry) /cable gland entry with two earthing terminals
410	Supply of I.S.I. Marked iron clad/ metal clad 100 Amps. 415/500 Volts triple pole and neutral switch fuse (conduit entry) /cable gland entry with two earthing terminals
411	Supply & fixing of approved make accepted standard sheet steel enclosure (dust protected) duly powder coated paint neutral bar suitable for MCB SP enclosure as required etc. complete as per specification (exclusive of M.C.B./ MCCB/RCBOs)
412	Supplying and fixing of analog time switch for automatic ON-OFF street light of approved make in existing LT panel including connections etc. as required as per specification
413	Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Madhya Pradesh Tenders

Services Tenders

Hospitality Related Services Tenders

Facility Management Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Annual Operation And Maintenance (Civil And Electrical, With Facility Management Service) For Office And Residential Township For Two Years In Jhingurda Area., Singrauli-Madhya Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Annual Operation And Maintenance (Civil And Electrical, With Facility Management Service) For Office And Residential Township For Two Years In Jhingurda Area., Singrauli-Madhya Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us