Tender For Annual Operation, Maintenance And Providing Civil & Electrical Maintenance (Including Facility Management Services) For Office And Residential Complex At Krishnashila Area For 2 Years., Krishnashila-Madhya Pradesh

TDR : 55578885

Tender Notice
BOQ

16 Days Left

Krishnashila , Madhya Pradesh

Tender Brief : Tender For Annual Operation, Maintenance And Providing Civil & Electrical Maintenance (Including Facility Management Services) For Office And Residential Complex At Krishnashila Area For 2 Years.

Document Fees
Refer document

EMD
₹ 1116100.0 /-

Tender Value
₹ 8.92 Crore /-

Submission Date
10-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil
2	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
3	Carriage of material by Mechanical Transport including loading, unloading and stacking Earth Lead - 2 Km
4	CARRIAGE OF MATERIALS by Mechanical Transport including loading, unloading and stacking-Lime, moorum, building rubbish Lead - 1 Km
5	Carriage of material by Mechanical Transport including loading, unloading and stacking Manure or sludge Lead - 2 Km
6	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
7	Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil
8	Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
9	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size).
10	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).
11	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
12	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
13	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)
14	Centering and shuttering including strutting, propping etc. and removal of form for all heights: Foundations, footings, bases of columns, etc. for mass concrete.
15	Centering and shuttering including strutting, propping etc. and removal of form for all heights: Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
16	Centering and shuttering including strutting, propping etc. and removal of form for all heights: Suspended floors, roofs, landings, balconies and access platform.
17	Centering and shuttering including strutting, propping etc. and removal of form for all heights: Lintels, beams, plinth beams, girders, bressumers and cantilevers.
18	Centering and shuttering including strutting, propping etc. and removal of form for all heights: Columns, Pillars, Piers, Abutments, Posts and Struts.
19	Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but, excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
20	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars
21	12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
22	12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)
23	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
24	25mm thick Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. (12.50mm nominal size stone aggregates )
25	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
26	Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
27	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm
28	Providing and laying matt finished vitrified tile of size 300x300x9.8mm having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
29	Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab upto 0.50 sqm
30	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
31	Welding by gas or electric plant including transportation of plant at site etc. complete.
32	Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
33	Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. In cement mortar
34	Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
35	Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
36	Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm
37	Renewing glass panes, with wooden fillets wherever necessary:Float glass panes of thickness 4 mm
38	Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece
39	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding
40	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.
41	Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I. plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick corrugated (2.5\\" or 4.2\\" or 6\\") or step-down (2\\" or 3\\" or 6\\" ) as specified.
42	Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I. plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick flat.
43	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter
44	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend
45	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion: Shoe (Plain) 110 mm Shoe
46	Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
47	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
48	Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface).
49	Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).
50	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work
51	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
52	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work.
53	Neat cement punning
54	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including water thinnable priming coat with cement primer.
55	Applying priming coat : With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
56	Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
57	Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats)
58	Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work
59	Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat.
60	French spirit polishing : Two or more coats on new works including a coat of wood filler
61	Removing and uprooting of unwanted vegetation grown over the drainage pipes, walls, Chajjas, balcony, and similar location of building upto floor Vth level with all tools & plants requireds with safety precautions and making good the same with plaster including disposal of material/ tree roots etc at the required place all complete as per instruction of EIC.
62	Lettering with black Japan paint of approved brand and manufacture
63	Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Medium shade pigment using 50% white cement 50% Grey cement
64	Brickwork with non-modular non modular FALG bricks (FALG bricks) confirming to IS:12894, class designation -7.5 average compressive strength etc. complete in all respect.- in foundation and plinth level in :. In cement Mortar 1:6 ( 1 cement : 6 Coarse sand)
65	Half-Brickwork with non-modular non modular FALG bricks (FALG bricks) confirming to IS:12894, class designation -7.5 average compressive strength etc. complete in all respect.- in foundation and plinth level in :. In cement Mortar 1:4 ( 1 cement : 4 Coarse sand)
66	Brickwork with non-modular non modular FALG bricks (FALG bricks) confirming to IS:12894, class designation -7.5 average compressive strength etc. complete in all respect.-In superstructure above plinth level upto floor V level. In cement Mortar 1:6 ( 1 cement : 6 Coarse sand)
67	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
68	Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 gm per sqm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm).
69	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia. & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood
70	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Kiln seasoned and chemically treated hollock wood. 30 mm thick shutters
71	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: Kiln seasoned and chemically treated hollock wood.
72	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
73	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness
74	Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
75	Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 12 mm thick
76	Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 18 mm thick
77	Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
78	Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws.
79	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
80	Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws: 30 mm thick shutters. with ISI marked M.S. pressed butt hinges bright finished of required size - Kiln seasoned and chemically treated hollock wood.
81	Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type ) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete.
82	Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.With stainless steel cover plate minimum 1.25 mm thickness
83	Providing sunmica for wood work as per instruction of EIC
84	Providing ans pasting of metallica II wall paper of approved manufacture with using fevicaol and other chemical in proper portion as aadhesive for pasting on wall paper,wall paper should be pasted on wzall faces fre from wrinkles and as directed by Engineer in Charge including tools and tacklescomplete
85	Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : 20 mm dia.
86	Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete. With 2nd class teak wood beading 62X19 mm.
87	Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm
88	Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 75 mm
89	Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm
90	Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 100 mm
91	Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 200x10 mm
92	Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 150x10 mm
93	Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 100x58x1.90 mm
94	Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 50x37x1.50 mm
95	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm
96	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868 ) transparent or dyedto required colour or shade, with necessary screws etc. complete : 200x10 mm
97	Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16 mm
98	Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
99	Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. 30 mm thick plain PVC door shutters.
100	Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
101	Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.
102	Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : With cement mortar 1:4 (1 cement : 4 fine sand).
103	Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
104	Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
105	Providing and fixing aluminum U beading of required size to Pre-laminated/ flush door shutter, including fixing etc. complete as per direction of Engineer-in-charge.
106	Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below
107	Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 90 mm
108	Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.
109	Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
110	Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessaryscrews etc. complete.
111	Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 18 mm thick
112	Lifting the damaged submersible pump and motor cable etc replacing it with working one and lowering the pump and motor assembly includingcable in bore holes dismentling thepipe during lifting and fixing the pipe during lowering with all materials and labour tools and plant etc complete as per inst.EIC)
113	Repairing of submersible Pump & motor with motor winding of submersisble pump set including changing of oil seal , rotor bush, oring impellers etc as required as per instruction of EIC with a guarantee period 6 Months:
114	Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of approved by Engineer - in - charge.quality and make as
115	Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \\"S\\" or \\"P\\" trap including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm
116	Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
117	Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
118	p/F WC extended floor mounting of cera or other approved make of approved shap including with dual flush fitting, including seat cover, fittinfs, nuts, bolts and gasket etc
119	P/F hand shower of jaguar make or equivalent (ALD-565)
120	P/F corner glass shelf (with bracket) of jaguar make or equivalent (ACN-1173)
121	P/F single lever wall mixer with provision of hand shower, but without hand shower (Jaguar make or equivalent((KUP-35119PM)
122	P/F exposed part Kit of single lever basin mixer wall mounted consisting of operating lever, wall flang, nipple and spout (suitable for item ALD-233 & ALD-235) (Jaguar make or equivalent ) (KUP-35233KPM)
123	P/F maze overhead shower 300mm round shape single flow(body & face plate stainless steel with chrome finish) with rubit cleaning system (Jaguar make or eauivalent)(OHS-CHR-1633)
124	P/F rimless single piece WC with UF soft close seat cover, tornado flushing, hinges , fixing accessories ste, cistern, fittings, S-trap 300mm. (Jaguar make or equivalent)(OPS-WHT-15851SN)
125	P/F swivel mirror of Jaguar make or equivalent (CAN-1195N)
126	P/F towel rack with lower hanger (stainless steel) with hook (Jaguar make or euiavalent)(AHS-1581H)
127	P/F soap dish holder of Jaguar make or equivalent (ACN-1131N)
128	p/f c.p. brass angle valve of jagur or other approved make for basin mixer and geyser points- 15mm nominal bore
129	p/f c.p. brass pillar cock of jaguar or other make for wash basin-15 mm nominal bore
130	p/f c.p. brass towel rail of jaguar or other approved
131	p/f liquid soap dispenser of jaguar make or other approved
132	p/f glass self of jaguar or other approved
133	p/f towel ring of jaguar or other approved
134	p/f white vitreous china round or suare type wash basined cera or other to be provided on granite top stone including making all connection
135	Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern
136	Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
137	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid
138	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap.
139	Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
140	Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long. Weighing not less than 88 gms.
141	Providing and fixing PTMT pillar cock of approved quality and colour . 15mm nominal bore, 107 mm long. Weighing not less than 110 gms.
142	Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms
143	Providing and fixing PTMT stop cock of approved quality and colour. 20 mm nominal bore, 89 mm long, weighing not less than 88 gms
144	Providing and fixing 100 mm sand cast Iron grating for gully trap.
145	Providing and fixing white vitreous china water closet squatting pan (Indian type) : Long pattern W.C. pan of size 580 mm
146	Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 630x450 mm
147	Providing and fixing kitchen sink including making all connections excluding cost of fittings. White glazed fire clay sink of size 600x450x250 mm
148	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board610x460 mm bowl depth 200 mm
149	Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - coloured
150	Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.
151	Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid
152	Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore
153	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia
154	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia
155	Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
156	Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
157	Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
158	Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter
159	Providing and fixing soil, waste and vent pipes : 100 mm dia Sand cast iron S&S pipe as per IS: 1729
160	Providing and fixing plain bend of required degree. 100 mm dia Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
161	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular tank
162	Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.
163	Providing and fixing brass bib cock of approved quality : 15 mm nominal bore
164	Providing and fixing brass stop cock of approved quality : 15 mm nominal bore
165	Providing and fixing brass stop cock of approved quality : 20 mm nominal bore
166	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: 15 mm nominal bore.
167	Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore.
168	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. 15 mm dia. nominal bore
169	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. 20 mm dia. nominal bore
170	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. 25 mm dia. nominal bore
171	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. 40 mm dia. nominal bore
172	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. 50 mm dia. nominal bore
173	Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms
174	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore
175	Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore.
176	Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 20 mm nominal bore.
177	Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 25 mm nominal bore.
178	Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 50 mm nominal bore.
179	Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore
180	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work 15 mm dia. nominal bore
181	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work 20 mm dia. nominal bore
182	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work 25 mm dia. nominal bore
183	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work 40 mm dia. nominal bore
184	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work 50 mm dia. nominal bore
185	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work 80 mm dia. nominal bore
186	Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore
187	Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms
188	Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 50 to 80 mm nominal bore
189	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore
190	Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : 100 mm diameter pipe
191	Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : 150 mm diameter pipe
192	Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : 200 mm diameter pipe
193	Supplying pig lead at site of work.
194	Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 100 mm diameter Class I
195	Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 150 mm diameter Class I
196	Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 200 mm diameter Class I
197	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore
198	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 80 mm nominal bore
199	Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge.
200	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes: Internal work - Exposed on wall 15 mm nominal outer dia. Pipes.
201	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes: Internal work - Exposed on wall 20 mm nominal outer dia. Pipes.
202	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes: Internal work - Exposed on wall 25 mm nominal outer dia. Pipes.
203	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes: Internal work - Exposed on wall 40 mm nominal outer dia. Pipes.
204	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes: Internal work - Exposed on wall 50 mm nominal outer dia. Pipes.
205	Repairing of sluice valve spindle by breezing proper machinery as per instruction of EIC 100mm to 125mm size
206	Supply of rubber gasket & standard quality
207	Labour rate for fixing G.I. pipes complete with G.I. fittings and making good the walls etc. Internal work - Exposed on wall15 to 40 mm dia nominal bore
208	P &F G.I. fittings: G.I. Tee 15 mm dia
209	P &F of G.I. fittings: G.I. Tee 20 mm dia
210	P &F of G.I. fittings: G.I. Tee 40 mm dia
211	P &F of G.I. fittings: G.I. Socket 15 mm dia
212	P &F of G.I. fittings: G.I. Socket 20 mm dia
213	P&F of G.I. fittings: G.I. Socket 25 mm dia
214	P&F of G.I. fittings: G.I. Socket 40 mm dia
215	P&F of G.I. fittings: G.I. Socket 50 mm dia
216	P &F of G.I. fittings: G.I. Elbow 15 mm dia
217	P &F of G.I. fittings: G.I. Elbow 20 mm dia
218	P &F of G.I. fittings: G.I. Elbow 25 mm dia
219	P &F of G.I. fittings: G.I. Elbow 40 mm dia
220	P&F of G.I. fittings: G.I.Elbow 50 mm dia
221	P&F of G.I. fittings: G.I.Nipple 15 mm dia
222	P&F of G.I. fittings: G.I.Nipple 20 mm dia
223	P&F of G.I. fittings: G.I.Nipple 25 mm dia
224	P&F of G.I. fittings: G.I.Nipple 40 mm dia
225	P&F of CI sluice valve - 80 mm
226	P&F of G.I. fittings: G.I.reducer socket 25 to smaller size
227	P&F of G.I. fittings: G.I.reducer socket 40 to smaller size
228	P&F of G.I. fittings: G.I.reducer socket 50 to smaller size
229	P&F of G.I. fittings: G.I.Union 40 mm dia
230	P&F Bibcock/Pillarcock washer
231	P&F float valve for low level cistern
232	P&F syphone for low level cistern
233	P&F syphone washer for low level cistern
234	Providing and fixing PVC water tank cover
235	P/f glanel packing of approved quality…..EIC
236	P/f M-seal of approved quality
237	P/f water less urinal of approved quality
238	Dismantling & cleaning of all the spares of pump & refixing after properly greasing & overhaul. ( 2 skilled + 2 unskilled) x 2shift x 2 days for 01 pump
239	Repairing of shaft welding electrode XUPER 680CGS04mm
240	Repairing of shaft XUPER680NH04mm
241	Repairing of shaft welding charges
242	Repairing of shaft machining charges
243	Repairing of shaft key way cutting
244	Repairing of Impeller (for 4 nos) welding electrode XHD2800 04mm
245	Repairing of Impeller (for 4 nos) welding charges
246	Repairing of Impeller (for 4 nos) machining charges
247	Repairing of Impeller (for 4 nos) Dynamic balancing charges L.S.
248	Repairing of bearing housing both side for 1 no rotating assly costing for one side C.I. machineable electrodes XUPER 2240 04mm
249	Repairing of bearing housing both side for 1 no rotating assly costing for one sidewelding charges
250	Repairing of bearing housing both side for 1 no rotating assly costing for one sidemachining charges
251	Providing & Fixing coupling bush of approved quality as perinstruction of EIC.
252	Providing & fixing coupling bolt of standard quality as perinstruction of EIC
253	Providing grease of standard quality for pump and motor
254	Providing/supply of spare parts of kirloskar make for monoblock DSM-2, DSM-3 and DSM-5 as given below:Coupling-DSM-3
255	Providing liquid chlorine solution, sodium hypochlorite based formulated confirming to IS-11673:1992 Grade-I and 10500-1991 for treatment of potable water.
256	Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
257	Clearing of toilet (floor area upto 10 sqm) including cleaning of dado, skirting, WC pam(indian type/western type), washbasin, urinals, glass shelves, mirror and other fittings, if any for D type or equivalent Quarter including any other wash basin outside the toilet by hand dusting and cleaning with soap solution acids, deodorants, phenyl etc. to make the toilet clean & hygienic all complete with tools, tackles & consumables as per intruction of ELC
258	Cleaning of toilet (Floor area upto 8 Sqm) including cleaning of dado, skirting, WC pan (Indian type/western type), wash basin, urinals, glass shelves, mirror and other fittings, if any for \\"C\\" type or equivalent Qtrs. including any other wash basin outside the toilet by hand dusting and cleaning with soap solution acids, deodorants, phenyl etc.to make the toilet clean & hygienic all complete with tools, tackles & consumables as per instruction of EIC.
259	Cleaning of toilet attached with hostel rooms, office chamber etc. including cleaning of floors, skirting & dado , WC pan (indian/european type ), wash basins, shelves, mirrors and other fitting ,if any , by hand dusting and cleaning with soap solution ,acids, deodorants, phenyl etc. to make the toilet clean and hygienic including providing naphthalene balls in urinal complete with all tools ,tackles & consumables as per instruction of EIC .(for community & service buildings.)
260	Cleaning of general/common toilet including cleaning of WC pan (indian/european type ), wash basins, urinals by hand dusting and cleaning with soap solution ,acids, deodorants, phenyl etc. to make the toilet clean and hygienic including providing naphthalene balls in urinal etc complete with all tools ,tackles & consumables as per instruction of EIC .
261	collection of garbage from door to door disposal of the same through closed vehicle or other suitable arrangement enabled with GPS system for tracking to the specified place within lead of 1KM including sweeping of stair case (for 1st and 2nd floor qtrs.) with all tools and tackles as per instruction of EIC. Ground floor.
262	collection of garbage from door to door disposal of the same through closed vehicle or other suitable arrangement enabled with GPS system for tracking to the specified place within lead of 1KM including sweeping of stair case (for 1st and 2nd floor qtrs.) with all tools and tackles as per instruction of EIC. First floor.
263	collection of garbage from door to door disposal of the same through closed vehicle or other suitable arrangement enabled with GPS system for tracking to the specified place within lead of 1KM including sweeping of stair case (for 1st and 2nd floor qtrs.) with all tools and tackles as per instruction of EIC. Second floor.
264	Disposal of dead animal including transportation to the specified place, making earth pit, disposal of dead animal into pit with adequate quantity of salt, lime bleaching power etc. and refilling the pit with earth all complete with tools,tackles and consumables as per instruction of EIC. Big animal (Cow, Buffalo, Ox and the like)
265	Disposal of dead animal including transportation to the specified place, making earth pit, disposal of dead animal into pit with adequate quantity of salt, lime bleaching power etc. and refilling the pit with earth all complete with tools,tackles and consumables as per instruction of EIC. Small animal (Dog, Cat,fox, Pig, Birds and the like)
266	Cleaning of inspection chamber of all size and disposal etc. all specified place outside the colony with all leads including removal & replacing of top cover, mending the damages of cover and chamber, if any etc. as per instruction of EIC.
267	Cleaning of sludge line and traps (kitchen & toilets) of all diameters at different floor including opening of joints, cleaning of pipe line and again jointing &flushing with fresh water all complete with tools & tackles as per instruction of EIC.
268	cleaning of choked sewer line & sludge line of all dia meters including removal of earth opening of joints, cleaning of pipe line, making joints leak proof etc. all complete including disposal of sludge materials outside the colony with all leads at specified place with tools & tackles as per instruction of EIC.
269	cleaning of roof top water tank, including draining out water,cleaning,disinfecting the tank by bleaching powder etc. and washing the tank with fresh water, writing of cleaning date with paint on the outer face of tank all complete with tools ,tackles & consumables as per instruction of EIC .
270	Cleaning of all types of roof including removal of dry leaves, weedings and cleaning dram holes, brooming etc. all complete with tool and tackle and stacking the garbage at specified place as per instruction of EIC
271	Cleaning of ground water reservoir including scraping of stains and muck from wall & floor and removal of muck from reservoir, disinfecting the tank by lime/bleaching powder etc. and washing the tank with fresh water, writing the cleaning date with paint on the outer surface of the tank all complete with tools, tackles and consumables as per instruction of EIC
272	Cleaning, mopping & washing of floor of public building/ other places neatly with detergent/bleaching powder etc all complete with tools, tackles and consumable to make the floor clean & hygienic as per instruction of EIC
273	Cleaning of door shutters, window shutters including chowkhats, window grills, glass panes, cobwebs etc. of service/community buildings with necessary detergents, chemicals etc. complete as per instuction of EIC
274	Brooming & cleaning of all roads in colony and within the premises of service building and other places as required with all tool and tackle and stacking the garbage at specified place as per instruction of EIC
275	Cleaning of surface drain including disposal of muck/sludge through trolley orm other arrangement to a specified place (in no case it shall be kept on drain banks) within a lead of 1 KM complete with all tools & tackles as per instruction of EIC . A) upto 300 mm wide
276	Cleaning of surface drain including disposal of muck/sludge through trolley orm other arrangement to a specified place (in no case it shall be kept on drain banks) within a lead of 1 KM complete with all tools & tackles as per instruction of EIC . A) above 300mm and upto 600mm wide
277	Toilet Soap
278	Bleaching powder
279	Hand wash refill
280	cost of material/tools/Uniform/safety equipments shoe (4 pair per year) Uniform & tools and tackles ( 4 set per year) Gloves and mask (48 set per year) Helmet ( 4 n0 per year) bacteria for culture/ decomposition of biodegradable waste ( 144 litres per year)
281	Transportation cost for disposal of dry waste from krishnashia to near by cement plant (i.e Dala)
282	Operation cost solid waste processing by transformation of solid waste including kitchen waste ti bio degradable nature (solid compost and liquid fertilizer) this will include fine segregation as per requirement and further cutting of grass, leave etc and segregation of kitchen waste and making it in properform of decomposting, decomposting of solid waste, composting of de-compost material using aerobic/bed/drum composting, drying and sieving of prepared compost, packaging in bags for solid compost and in canes for liquid ferlizers etc all works as per instruction of site in-charge. other misc work/requirement to complete the above mention solid compost/liquid ferlizer preparation project coordinator/ supervisor (1 no per day), chawkidar/guard (1 no per day) unskilled worker/ labours (2 nos per day)
283	Anti Adult Measures-General disinfection/Pest control with new generation odorless, colorless insecticides which should be safe for human being and effective for all kind of house hold insects like mosquitos, house flies, etc. using residual spray of deltamethrin 2.5 % SC flow (K-othrine or approved equivalent).Insecticides should be sprayed uniformly over the surface of walls, celling, etc. Frequency-once in 3 months
284	Anti Adult Measures-General disinfection/pest control with a new generation odourless,colourless insecticides which should be safe for human being and effective for all kind of household insects like mosquitos,housefliesetc.Using residual spray of Cyfluthrin 5% EW(Solfac EW OSO or approved equivalent).Insecticides should be sprayed uniformly over the surfaces of wall,ceiling,etc.Frequency -once in 3 month
285	Thermal Fogging-Using insecticide Deltamethrin 1.25% ULV (kingfog or approved equivalent) mixed with Diesel in the ration of 1:199, for outdoor operation of coloney, etc. Frequency- Monthly
286	Anti Larvae Measures-Treatment by using Diflubenzuron 25% WP (Bi-larv or approved equivalent) solution to be spread as per instructions of EIC. Frequency -Weekly
287	Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).
288	Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
289	Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge
290	Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m. lead complete (cattle manure measured in stacks will reduced by 8% for Payment).
291	Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge. Top inside dia 30 cm, outer bottom dia 20 cm, total height 30 cm with wall thickness of 25.4 mm
292	Filling of the following size empty pots with mixture of good earth & manure in the ratio of 2:1 (Two part of Good earth & one port of manure) and placing them on appropriate place i/c carriage of earth, manure and pots up to 50 mtr, as per direction of officer incharge. (The cost of good earth, earthen pots & manure will be paid separately.) Size of Empty Pots 35cm Top dia, 25cm Bottom Dia & 35cm Perpendicular height.
293	Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : Holes 60 cm dia, and 60 cm deep
294	Cutting of Hedge/Edge including removing of cut material, cleaning, hoeing of hedge/edge bed watering, manureing and applying insecticides and fungicides etc.(excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge.
295	Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, hedge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide , Pesticide will be provided by the Department & lawn mover and brush cutter with fuel , other T & P material/articles shall be provided by the contractor.) Permanent office accommodation. (as per yard stick 1Mali =1.25Acre)
296	Complete maintenance of trees (Out side garden features), jobs like making of basin at regular interval i/c watering, weeding, pruning & application of fertilizer etc, (excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge. Trees for 250 no/(up to 4 & up to 3 year Slow & Fast growing group)
297	Complete maintenance of shrubs (Out side garden features), jobs like making of basin at regular interval i/c watering, weeding, pruning & application of fertilizer etc, (excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge.
298	Maintenance of potted plants Cement pots at ground floor in flats and ground floor bungalow,office complex including application of good earth, manure, insecticide, pesticide and fertilizer, removing of dry parts by pruning, cleaning dry leaves and displaying in appropriate place and replacement of broken pots coloring of pots and change of location of pots and replacing with fresh plants as and when required (Materials shall be provided by the department) as per direction of officer in charge (For of Cement pots 300 Nos)
299	FOLIAGE AND SHADE LOVING PLANTS Providing and displaying of Araucaria cookie plant, having ht. 60 cm to 75 cm, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 20 cm size of Earthen pot / Plastic pot. & as per direction of the officer-in-charge.
300	FOLIAGE AND SHADE LOVING PLANTS Providing and displaying of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.
301	FOLIAGE AND SHADE LOVING PLANTS Providing and displaying of Croton Baby Golden Punctatumaureum plant, having ht. 23 cm to 30 cm, well developed with fresh and healthy foliage in 15 cm size of Earthen pot / Plastic pot. as per direction of the officer-in- charge.
302	FOLIAGE AND SHADE LOVING PLANTS Providing and displaying of Croton petra Banglore variety plant, having ht 45 cm & above, well developed with fresh and healthy leaves in 20 cm size of Earthen pot / Plastic pot. & as per direction of the officer-in-charge.
303	FOLIAGE AND SHADE LOVING PLANTS Providing and displaying of Phoenix palm plant, having ht. 75 cm to 90 cm with 10 to 15 or more leaves, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.
304	ORNAMENTAL PLANTS Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy plant in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.
305	ORNAMENTAL PLANTS Providing and Displaying Cycus revoluta in 35 cm challi, specimen plant, having 30 to 40 with fresh and healthy, leaves having 25cm to 30cm circumfrance of base stem well developed as per direction of the officer-in-charge.
306	GROUND COVERS PLANTS Providing and Displaying of Euphorbia milli hybrid variety plant, having ht.30 cm to 45 cm with multi branch, full bloom, fresh and healthy leaves in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in- charge.
307	TREE PLANTS Supply and stacking of Bottle palm plant of ht. 150-180 cm bottom girth 20-25 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge.
308	SHRUBS Supply and stacking of plant Mussaenda erythrophylla (Rosea) of height 60-75 cm. multi branched in earthen pots of size 25 cm as per direction of the officer-in-charge.
309	Supply and stacking of plant Thuja compacta of height 45-60 cm., well branched in earthen pots of size 25 cm as per direction of the officer-in-charge.
310	ANNUAL FLOWER SEEDLINGS/CUTTINGS Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Chrysanthemum double
311	ANNUAL FLOWER SEEDLINGS/CUTTINGS Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Dahlia double
312	ANNUAL FLOWER SEEDLINGS/CUTTINGS Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge.Marigold inca hybrid
313	ANNUAL FLOWER SEEDLINGS/CUTTINGS Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Pansy Hybrid
314	ANNUAL FLOWER SEEDLINGS/CUTTINGS Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Petunia hybrid
315	ANNUAL FLOWER SEEDLINGS/CUTTINGS Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Phlox mix colour hybrid
316	ANNUAL FLOWER SEEDLINGS/CUTTINGS Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Poppy double
317	ANNUAL FLOWER SEEDLINGS/CUTTINGS Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Salvia Hybrid different colour
318	Supplying and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Balsum seedling
319	Supplying and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Cosmos hybrid
320	Supplying and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Gaillardia Double
321	Supplying and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Kochia
322	Supplying and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Vinca Hybrid
323	Supplying and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Zinnia hybrid
324	supply of fertilizer, pesticidsDAP
325	supply of fertilizer, pesticidsUREA
326	supply of fertilizer, pesticids BONEMEAL
327	supply of fertilizer, pesticids ROSE MIXTURE
328	supply of fertilizer, pesticids NEEM CAKE
329	supply of fertilizer, pesticids ROGAR 30%
330	SARSO KHALLI
331	Painting of flower pots as per instructions of EIC Mosaic pots of 15\\" size with enamel paint of approved brand '
332	Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
333	Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, hedge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide , Pesticide will be provided by the Department & lawn mover and brush cutter with fuel , other T & P material/articles shall be provided by the contractor.) Play grounds / Public parks (as per yard stick 1Mali =2.00Acre).
334	Providing and Displaying plants Budded Rose (H.T. variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower plant in 20 cm Earthen Pot, as per direction of the officer-in-charge.
335	Providing and displaying of Croton Duck foot (Elite) plant, having ht. 45 cm and above with 3to 4 branches, well developed, fresh and healthy leaves in 25 cm size of Earthen pot/Plasticpot. & as per direction of the officer-in-charge.
336	Supplying, P&F deck roller blind complete in all respect
337	Supplying, P&F deck verticle blind complete in all respect
338	Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be madeseparately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
339	Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling thejoints with fine sand etc. all complete as per the direction of Engineer in-charge. (Old CC paver blocks shall be supplied by the department free of cost).
340	Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 30 cm girth upto and including 60 cm girth
341	Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I
342	Supply and pasting of high intensity retro reflective sheet of different colours and shades as per instruction of EIC High intensity retro reflective sheet as per IRC 67-2001
343	Providing and pasting reflective self adhesive vinyl sticker letter/number/shapes cut on computer driven plotter, pre spaced, and placed onto a pre masked transfer tape and shall be made from 3M series 3400 engineer grade reflective sheeting. Design of letter/number/shape and colour shall be pre approved by engineer in charge
344	Petty carpentary repair works such as repairing of cupboard, nails screw fixing hinges tightening of doors and windows shutter etc. as & when required as per instruction of EIC.
345	Labour rate for small petty water supply repair work such as fixing of washer in bib cock, stop cock, adjusting of foot valves of cistern, fixing of water supply fitting such as GI nipple, socket, tee, plug, union, elbow etc. as and when required as per instruction of EIC.
346	Operation of pump & motor and submersible pump at Township Krishnashila & GM Office by engaging 7 Nos.(5 Nos. semi skilled + 2 No. unskilled) labourers per day as per following arrangement. i). Ist shift:3 No. ii). 2nd shift:3 No. iii). 3rd shift : 1 No. All complete as per instruction of EIC.Deduction will be made at double rate in case of non/less deployment of labour on prorata basis.
347	Providing round the clock security guard without gun for watch & ward of Government premises and its all belongings by deploying neatly dressed security guards in 8 hour's shift including necessary T&P like torch, lathi and uniform etc.complete,as per the direction of Engineer-in-charge. (One job means 8 hour's duty).
348	Facility Manager for heading the entire facility team of Office and Residential Complex and Single point of contact & overall in charge of FM On-site Operations and reporting to engineer-incharge or his representative. (01 No.)
349	Asst. Facility Manager (Technical) for supporting Critical Services Operations & reporting to Facility Manager. (1 nos. A.F.M.)
350	Day to day maintenance of electrical wiring, other safety electrical equipments in shifting quarters, Service Buildings and other miscellaneous works (as and when required) in offices/service buildings and township of Krishnashila Project for 02 (Two) Years.
351	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable (Make-Havells, Anchor, Polycab or equivalent) in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
352	Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required (Make-Havells, Anchor, Polycab or equivalent)
353	Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire) (for Light and Fan Point) (Make-Havells, Anchor, Polycab or equivalent)
354	Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire) (for Light and Fan Point) (Make-Havells, Anchor, Polycab or equivalent)
355	Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amps switch
356	Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 2 way 5/6 amps switch
357	Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 15/16 amp switch
358	Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.3 pin 5/6 amp socket outlet
359	Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.6 pin 15/16 amp socket outlet
360	Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.Bell push
361	Supplying and fixing PVC batten/ angle holder including connections etc. as required.
362	Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
363	Supplying and fixing of Single pole 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
364	Supplying and fixing 40 A, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
365	Supplying and fixing 63 A, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
366	Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
367	Supplying and fixing 12 way, Double door, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
368	Providing and fixing of service line connection with 10 sqmm, 4 Core Aluminium unarmoured cable.
369	Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but with charcoal/ coke and salt) as required.
370	Providing and fixing 100 A, 4 Pole, 30 KA rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
371	Providing and fixing 100 A capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.
372	Providing and fixing 200 A capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.
373	Supply, installation, commissionig and testing of 1 ph, 230 V, 2 HP DOL Submersible Pump Starter of make- Havells/Equivalent with HSN Code- 8536, suitable at 200 V - 400 V coil voltage with all the necessary protective devices inbuild in it.
374	Supply, installation, commissionig and testing of 3 ph, 440 V, 7.5 HP ASD Submersible Pump Controller starter of Submersible Pump Starter with make- Havells/Equivalent with HSN Code- 8536, suitable for 260 V - 440 V with all the necessary protective devices inbuild in it.
375	Supply of AC Box With 20A SP MCB & 3 Pin Socket of standar make and specifications as per instructions of EIC.
376	Supply, installation, commissionig and testing of 24 Hour Analog Time Switch (SST* - 15 min) HSN Code - 9107 of make havells/equivalent as per instructions of EIC.
377	Supplying and fixing of 63 A, 30 mA rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.
378	Supply and fixing of Copper Busbar Chamber of 200 A Rating, wall mounted, 8 Way on location specified by EIC as per requirement.
379	Supply and fixing of surface mounting plastic box for switch and sockets, of diiferent size of standard make with cover plate of same size. 3 Module
380	Supply and fixing of surface mounting plastic box for switch and sockets, of diiferent size of standard make with cover plate of same size. 4 Module
381	Supply and fixing of surface mounting plastic box for switch and sockets, of diiferent size of standard make with cover plate of same size. 6 Module
382	Supply and fixing of surface mounting plastic box for switch and sockets, of diiferent size of standard make with cover plate of same size. 8 Module
383	Supply and fixing of surface mounting plastic box for switch and sockets, of diiferent size of standard make with cover plate of same size. 12 Module
384	Supply and installation of 2 core, 6 sqmm PVC insulated cable of make-Havells/Equivalent with FR PVC, round sheathed, copper conductor (flexible) industrial cable, 1100 Volts, conforming to IS694
385	Supply and Fixing of 10 Sqmm, 4 Core, 1100 V Garde, Flexible Copper cable for power supply of different residential quarters and service buidlings as and when required basis.
386	Supply and Fixing of 10 Sqmm, 2 Core, 1100 V Garde, Flexible Copper cable for power supply of different residential quarters and service buidlings as and when required basis.
387	Supply and Fixing of Ding Dong wireless and polyphonic call bell with batteries.
388	Supply and fixing of Square shape, 20 Watt, 200 MM X 200 MM X 27 MM LED recessed mounted Ceiling Light \\"Trim LED Panel Square\\" of make Havells of 6000 K and 4000 K Color Temperature, Warranty minimum 2 years, Polycarbonate Material or equivalent make having same specifications as specified including cutting of board, connections in pre-existing electircal wire circuit, finishing to look good and including contractor Profit.
389	Supply and fixing of Square shape, 24 Watt, 287 MM X 287 MM X 18 MM LED recessed mounted Ceiling Light \\"Octane LED Panel Square\\" of make Havells of 6500 K Color Temperature, Warranty minimum 2 years, Polycarbonate Material or equivalent make having same specifications as specified including cutting of board, connections in pre-existing electircal wire circuit, finishing to look good and including contractor Profit.
390	Supply and fixing of Square shape, 36 Watt, 580 MM X 580 MM X 38 MM LED recessed mounted Ceiling Light \\"Octane LED 2 X 2 Panel\\" of make Havells of 6500 K Color Temperature, Warranty minimum 2 years, Polycarbonate Material or equivalent make having same specifications as specified including cutting of board, connections in pre-existing electircal wire circuit, finishing to look good and including contractor Profit.
391	Hiring of 12/14 ton crane for material handling like shifting of Transformer, Shed, Motor etc. in Township (including Diesel charges) on as and when required basis as per Instructions of EIC.
392	Hiring of 01 No, 5 KVA Generator for power supply backup in official programs and meetings in township on as and when required basis as per Instructions of EIC.
393	Hiring of 01 No, 7.5 KVA Generator for power supply backup in official programs and meetings in township on as and when required basis as per Instructions of EIC.
394	Supply and Fabrication of Tees, Angle and Channel for different purposes as per Instructions of EIC on as and when required basis with welding work (if required).
395	Supply and Fabrication of 100 mm GI Pipe for underground cable laying and other purposes as per Instructions of EIC on as and when required basis with welding work (if required).
396	Supply and Fabrication of 150 mm GI Pipe for underground cable laying and other purposes as per Instructions of EIC on as and when required basis with welding work (if required).
397	Supply and Fiximg of 3 pole, MNX 80 contractors , Coil voltage 240/440V, 1 NO,1NC conforms to IS/IEC 60947-4-1 , Range-80A, in Pump house starter
398	Supply and Fixing of 3 pole ,M/L 6 Contactor, Coil voltage 240/440V, Range 110A, 2NO, 2NC in Pump house starter,street lighting starters,&Tower lights starters
399	Supply and Fixing of MNX 18 contactor, Range 18A, Coil voltage 240/440V, 1NO,1NC conforms to IS/IEC60947-4-1i in fountain pump starters
400	Day to day maintenance of various types of residential quarters, service buildings and power supply distribution system for Two (02) years (730 Days) at Krishnashila Project.
401	Day to day maintenance of various types of residential quarters, service buildings and power supply distribution system:This includes:• Maintenance of power supply & distribution system in the township.• Maintenance of LT Overhead lines.• Maintenance of HT Overhead lines (GM Office Feeder, Township Feeder, Service Building Feeder etc).• Maintenance of power transformers, MCCB’s, feeder pillars, bus bars, cables, service lines, main switches, street light.• Day and day electrical maintenance in residential quarters like fixing of switch, socket, angle holder, boards, tube light, fan, distribution wiring, connection from poles within quarters etc.• Rectification of No Power complaints.• Minor Works likeloading unloading of items, maintenacne of sub station, cleaning of sub station, cable laying, trench making, tree trimming, grass cutting etc. on as and when required basis.
402	Day to day maintenance of Air-Conditioners installed at various locations of Krishnashila Project for Two years.
403	Normal servicing of AC and removal of dust with dust blower and jet water spray.
404	Complete servicing of AC and removal of dust of indoor and outdoor unit with jet water spray.
405	Checking of leakage and Gas Charging
406	Supply of Gas R-32 or other as per instructions of EIC.
407	Supply of Gas R-22 or other as per instructions of EIC.
408	Repairing of PCB
409	Supply and Fixing of Running Capacitor 50/55 mf
410	Supply and Fixing of Copper Pipe 1/4\\"
411	Supply and Fixing of Copper Pipe 1/2\\"
412	Supply and Fixing of Contactor Relay
413	Supply and Fixing of Sensor
414	Supply and Fixing of New PCB
415	Supply and Fixing of AC filter net
416	Supply and Fixing of Indoor motor
417	Supply and Fixing of Indoor blower
418	Supply and Fixing of Outdoor Fan
419	Supply and Fixing of Outdoor Motor
420	Supply and Fixing of Compressor of 1.5 T AC
421	Supply and Fixing of Condenser Coil
422	Supply and Fixing of ODU Motor
423	Supply and Fixing of AC Outdoor Unit Stand
424	Supply and Fixing of Drain Pipe
425	Installation, Dismantling and vice versa of window/split AC of 1.5 T, 2 T etc. As per instructions of EIC.
426	Supply and Fixing of 1.5 Ton Split Air Conditioner indoor and outdoor unit cover of Weatherproof covers made from high tensile polyester material
427	Day to day maintenance of Water Cooler and Refrigerator units installed at various locations of Krishnashila Project for Two years.
428	Supply and Fixing of Water Cooler Compressor
429	Supply and Fixing of Water Cooler Tank Coil
430	Water Cooler Gas Charging
431	Water Cooler Service Charge
432	Supply and Fixing of Refrigerator/Deep Freezer Compressor of Make and Model as per site of 250 L and above as per instructions of EIC
433	Supply and Fixing of EVAP Fan Motor for water coller & Refrigerator
434	Gas Refilling R 134
435	Supply and Fixing of Defrost PCB
436	Supply and Fixing of Relay OLP
437	Supply and Fixing of Sensor
438	Service and Labour Charges
439	Repairing, Rewinding, Greasing, and Maintenance of Ceiling Fans installed at various types of Residential Quarters & Service Buildings of Krishnashila Project for 02 (Two) Years.
440	Dismantling and installation of Ceiling Fan.
441	Rewinding of Ceiling fan with super enameled copper wire of suitable gauge after clearing of damaged / burnt winding including greasing checking etc. compete in all respect.
442	Supply and fixing of Main shaft of Ceiling Fan.
443	Supply and fixing of copper bush of different size suitable to existing / rewound ceiling fan of different size and make.
444	Supply and fixing of rubber bush
445	Supply and fixing of sealed ball bearing like 6201, 6202, 6203, 6204 of reputed, makes- SKF, FAG, NBC, Timken only suitable to existing / rewound ceiling fan of different size.
446	Supply and fixing of Connector of different size suitable to existing / rewound ceiling fan of /different size and make.
447	Supply and fixing of Down Rod of different size suitable to existing / rewound ceiling fan of /different size and make.
448	Supply and fixing of capacitor 2.5 mfd 440 Volt as per ISI Specification.
449	Supply of Nut Bolt & Chira Pin
450	Repairing, Rewinding, Greasing, and Maintenance of Exhaust Fans installed at various types of Residential Quarters & Service Buildings of Krishnashila Project for 02 (Two) Years.
451	Repair, Rewinding and Maintenance of 300 mm Sweep Size Exhaust Fan as per nature of complaint
452	Copper Wire 320 gm each for rewinding
453	Bearing set
454	Blade
455	Condenser 2.5 Mfd
456	Shaft and Bush
457	Labour Charges
458	Contractor Profit
459	Repair, Rewinding and Maintenance of 200 mm Sweep Size Exhaust Fan as per nature of complaint
460	Copper Wire 220 gm each for rewinding
461	Bearing set
462	Blade
463	Condenser 2.5 Mfd
464	Shaft and Bush
465	Labour Charges
466	Contractor Profit
467	Jhallar Lighting in Township on various occasions as and when required basis for 02 Years.
468	Jhallar lighting in GM Office
469	Jhallar lighting in Officer's Club
470	Jhallar lighting in Worker's Club
471	Jhallar lighting in Khel Bhawan near Officer's Club
472	Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Madhya Pradesh Tenders

Services Tenders

Hospitality Related Services Tenders

Facility Management Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Annual Operation, Maintenance And Providing Civil & Electrical Maintenance (Including Facility Management Services) For Office And Residential Complex At Krishnashila Area For 2 Years., Krishnashila-Madhya Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Annual Operation, Maintenance And Providing Civil & Electrical Maintenance (Including Facility Management Services) For Office And Residential Complex At Krishnashila Area For 2 Years., Krishnashila-Madhya Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us