|
| 1 | Excavation in all kinds of strata including boulders up to 0.6 m diameter and placing the excavated stuff neatly in dump area as directed by work in charge including cost of all materials, labour, resign bed and ides to required level and profile etc. complete with lead up to 15 m and 6 m lift. Excavation in Soil and Soft Murum |
| 2 | Excavation in all kinds of strata including boulders up to 0.6 m diameter and placing the excavated stuff neatly in dump area as directed by work in charge including cost of all materials, labour, resign bed and ides to required level and profile etc. complete with lead up to 15 m and 6 m lift. Excavation in Hard Murum |
| 3 | Excavation in all kinds of strata including boulders up to 0.6 m diameter and placing the excavated stuff neatly in dump area as directed by work in charge including cost of all materials, labour, resign bed and ides to required level and profile etc. complete with lead up to 15 m and 6 m lift. Excavation in Soft Rock |
| 4 | Excavation in all kinds of strata including boulders up to 0.6 m diameter and placing the excavated stuff neatly in dump area as directed by work in charge including cost of all materials, labour, resign bed and ides to required level and profile etc. complete with lead up to 15 m and 6 m lift. Excavation in Hard Rock |
| 5 | Providing and fixing steel rock bolts / Anchor bar (25 mm dia.) of 2.1 m length with mechanical / wedge type anchorage including drilling holes, providing tapered steel wedge, plates and nutes and tighting the same by torque wrench after hardening of cement grout. Including all machinery labour charges with all lifts. |
| 6 | Providing and laying in situ cement concrete of grade M- 15 of trap / granite / gneiss / quartzite / graded metal for foundation and bedding with Concrete Mixer including placing, compacting, curing with an initial lead of 1 km and all lifts etc. complete as directed.M-15 (40 MSA) (Cement 5.20 bag/CuM) |
| 7 | Providing Reinforcement Steel for PCC Work includes all dia. bars, transportation charges, loading and unloading charges with cutting, bending , hooking and binding etc. complete. |
| 8 | Straight Needle K.T. Weir Gate-Manufacturing- Manufacturing with QAP & fabrication of KT weir needle gates - straight type size 2.15 x 0.5M- 94 Kg. weight as per relevant Indian Standards with all material, Mild steel confirming to IS 2062, Rubber seal confirming to IS 4623 & Welding electrodes AWS E6013 for general weld joints. It includes all materials, Labour charges, machinery charges, 1km lead charges of transportation, loading and unloading charges of Gate parts at Site, Inspection & Quality control charges, Sand blasting, Painting with one coat of Zinc rich primer on dry film to give total dry film thickness 70 +/- 5 microns and 2 coats of sloventless coal tar epoxy paint applied to give minimum dry film thickness of 150+/- 5 micron per coat as per IS 14177. |
| 9 | Providing CHANNELS 75X40 MM as directed by engineer in charge. |
| 10 | Providing Submerge area treatment for increase storage by excavating silt and soft stuff and shaping to banks as govt circular etc. Comp. |
| 11 | Provinding pianting Name Board of aproved colour and Letter size on front side of NOF with details of works. |
| 12 | For Sand |
| 13 | For other Materials |
| 14 | Insurance 1 % ( To be put in tender but % above & below will not be applicable to this item as the it has to be paid as per rates decided by Govt of Maharashtra) Please Enable Macros to View BoQ information |
